Adding Keyboard The Mad Noodle Udon13

keyboards/themadnoodle/udon13/config.h

@@ -0,0 +1,6 @@
+// Copyright 2023 Jesse Leventhal (@The=Mad-Noodle)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL + 5

keyboards/themadnoodle/udon13/info.json

@@ -0,0 +1,75 @@
+{
+    "manufacturer": "The Mad Noodle",
+    "keyboard_name": "Udon13",
+    "maintainer": "The-Mad-Noodle",
+    "url": "https://www.madnoodleprototypes.com/",
+    "bootloader": "atmel-dfu",
+    "diode_direction": "ROW2COL",
+    "features": {
+        "bootmagic": true,
+        "command": false,
+        "console": false,
+        "extrakey": true,
+        "encoder": true,
+        "mousekey": true,
+        "nkro": true,
+        "rgblight": true,
+        "oled": true
+    },
+    "rgblight": {
+        "hue_steps": 10,
+        "led_count": 6,
+        "sleep": true,
+        "animations": {
+            "breathing": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true,
+            "snake": true,
+            "knight": true,
+            "christmas": true,
+            "static_gradient": true,
+            "rgb_test": true,
+            "alternating": true,
+            "twinkle": true
+        }
+    },
+    "ws2812": {
+        "pin": "B7"
+    },
+    "matrix_pins": {
+        "cols": ["F0", "F5", "F4", "F6"],
+        "rows": ["F7", "F1", "D6", "D7"]
+    },
+    "processor": "atmega32u4",
+    "usb": {
+        "device_version": "1.0.0",
+        "pid": "0x0012",
+        "vid": "0x6A6C"
+    },
+    "layouts": {
+        "LAYOUT": {
+          "layout": [
+            {"label":"Encoder", "x":3, "y":0, "matrix": [0,3]},
+            {"x":0, "y":1, "matrix": [1,0]},
+            {"x":1, "y":1, "matrix": [1,1]},
+            {"x":2, "y":1, "matrix": [1,2]},
+            {"x":3, "y":1, "matrix": [1,3]}, 
+            {"x":0, "y":2, "matrix": [2,0]},
+            {"x":1, "y":2, "matrix": [2,1]},
+            {"x":2, "y":2, "matrix": [2,2]},
+            {"x":3, "y":2, "matrix": [2,3]}, 
+            {"x":0, "y":3, "matrix": [3,0]},
+            {"x":1, "y":3, "matrix": [3,1]},
+            {"x":2, "y":3, "matrix": [3,2]},
+            {"x":3, "y":3, "matrix": [3,3]}
+            ]
+        }
+    },
+
+    "encoder": {
+        "rotary": [
+            { "pin_a": "B6", "pin_b": "B5" }
+        ]
+
+    }
+}

keyboards/themadnoodle/udon13/keymaps/default/keymap.c

@@ -0,0 +1,52 @@
+// Copyright 2023 The Mad Noodle(@the_mad_noodle)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/*Layer 0*/
+    [0] = LAYOUT(
+        KC_MUTE,
+        KC_MPLY, KC_MPRV, KC_MNXT, KC_MSEL, 
+        KC_UNDO, KC_CALC, KC_MAIL, KC_MYCM, 
+        KC_COPY, KC_CUT, KC_PSTE, TO(3)
+        ),
+
+/*Layer 1*/
+    [1] = LAYOUT(
+        RGB_TOG, 
+        RGB_SAD, RGB_SAI, RGB_HUD, RGB_HUI, 
+        RGB_MOD, RGB_RMOD, RGB_M_P, RGB_M_B, 
+        RGB_M_SW, RGB_SPD, RGB_SPI, TO(0)
+        ),
+
+/*Layer 2*/ 
+    [2] = LAYOUT(
+        KC_NO, 
+        KC_NO, KC_NO, KC_NO, KC_NO, 
+        KC_NO, KC_NO, KC_NO, KC_NO, 
+        KC_NO, KC_NO, KC_NO, TO(0)
+        ),
+
+/*Layer 3*/       
+    [3] = LAYOUT(
+        KC_NO, 
+        TO(1), TO(2), KC_NO, KC_NO, 
+        KC_NO, KC_NO, KC_NO, KC_NO, 
+        KC_NO, KC_NO, KC_NO, TO(0)
+        ),
+
+};
+
+/*Encoder Mapping*/
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+    [0] =  {ENCODER_CCW_CW(KC_VOLD,  KC_VOLU)},
+    [1] =  { ENCODER_CCW_CW(RGB_VAD, RGB_VAI)},
+    [2] =  { ENCODER_CCW_CW(KC_LEFT, KC_RGHT)},
+    [3] =  { ENCODER_CCW_CW(KC_DOWN,   KC_UP)},
+
+};
+#endif

keyboards/themadnoodle/udon13/keymaps/default/rules.mk

@@ -0,0 +1,2 @@
+ENCODER_MAP_ENABLE = yes
+LTO_ENABLE = yes

keyboards/themadnoodle/udon13/keymaps/via/keymap.c

@@ -0,0 +1,52 @@
+// Copyright 2023 The Mad Noodle(@the_mad_noodle)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/*Layer 0*/
+    [0] = LAYOUT(
+    KC_MUTE, 
+        KC_MPLY, KC_MPRV, KC_MNXT, KC_MSEL, 
+        KC_UNDO, KC_CALC, KC_MAIL, KC_MYCM, 
+        KC_COPY, KC_CUT, KC_PSTE, TO(3)
+        ),
+
+/*Layer 1*/
+    [1] = LAYOUT(
+        RGB_TOG, 
+        RGB_SAD, RGB_SAI, RGB_HUD, RGB_HUI, 
+        RGB_MOD, RGB_RMOD, RGB_M_P, RGB_M_B, 
+        RGB_M_SW, RGB_SPD, RGB_SPI, TO(0)
+        ),
+
+/*Layer 2*/ 
+    [2] = LAYOUT(
+        KC_NO, 
+        KC_NO, KC_NO, KC_NO, KC_NO, 
+        KC_NO, KC_NO, KC_NO, KC_NO, 
+        KC_NO, KC_NO, KC_NO, TO(0)
+        ),
+
+/*Layer 3*/       
+    [3] = LAYOUT(
+        KC_NO, 
+        TO(1), TO(2), KC_NO, KC_NO, 
+        KC_NO, KC_NO, KC_NO, KC_NO, 
+        KC_NO, KC_NO, KC_NO, TO(0)
+        ),
+
+};
+
+/*Encoder Mapping*/
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = {
+    [0] =  {ENCODER_CCW_CW(KC_VOLD,  KC_VOLU)},
+    [1] =  { ENCODER_CCW_CW(RGB_VAD, RGB_VAI)},
+    [2] =  { ENCODER_CCW_CW(KC_LEFT, KC_RGHT)},
+    [3] =  { ENCODER_CCW_CW(KC_DOWN,   KC_UP)},
+
+};
+#endif

keyboards/themadnoodle/udon13/keymaps/via/rules.mk

@@ -0,0 +1,3 @@
+ENCODER_MAP_ENABLE = yes
+LTO_ENABLE = yes
+VIA_ENABLE = yes

keyboards/themadnoodle/udon13/readme.md

@@ -0,0 +1,27 @@
+# Udon:13
+
+![Udon13](https://i.imgur.com/DppYeTCh.jpg)
+
+*The Udon:13 is a 12 hotswap key macro keypad with a push button encoder knob and 128x32 OLED display*
+
+* Keyboard Maintainer: [The Mad Noodle](https://github.com/The-Mad-Noodle)
+* Hardware Supported: Udon:13 PCB
+* Hardware Availability: https://www.madnoodleprototypes.com/shop
+
+
+Compile example for this keyboard (after setting up your build environment):
+
+    qmk compile -kb themadnoodle/udon13 -km default
+
+Flashing example for this keyboard:
+
+    qmk flash -kb themadnoodle/udon13 -km default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader & Flashing
+
+
+**Physical reset button**: 
+
+* Press the physical button located on the top left of the back of the PCB (Labeled RST) to enter Bootloader Mode

keyboards/themadnoodle/udon13/rules.mk

@@ -0,0 +1 @@
+# This file intentionally left blank

keyboards/themadnoodle/udon13/udon13.c

@@ -0,0 +1,76 @@
+// Copyright 2023 The Mad Noodle(@the_mad_noodle)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "quantum.h"
+
+#ifdef OLED_ENABLE
+
+/* OLED Settings */
+//------------------------------------------------------------------------------------------------
+
+static void render_logo(void) { // Render Mad Noodle logo
+    static const char PROGMEM logo_1[] = {0x00, 0x00, 0x80, 0xc0, 0x60, 0x30, 0x18, 0x0c, 0x04, 0x06, 0x82, 0xc3, 0x43, 0x61, 0xa1, 0xa1, 0xa1, 0xa1, 0x61, 0x43, 0xc3, 0x82, 0x06, 0x04, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0x80, 0x00, 0x00};
+    static const char PROGMEM logo_2[] = {0xf8, 0x1e, 0xc3, 0xf8, 0x5c, 0x76, 0x7b, 0x6d, 0x75, 0x55, 0x55, 0x75, 0x6d, 0x7b, 0x76, 0x5e, 0x7e, 0x77, 0x5b, 0x6d, 0x75, 0x55, 0x55, 0x75, 0x4d, 0x7b, 0x66, 0x5c, 0xf0, 0xc3, 0x3e, 0xf0};
+    static const char PROGMEM logo_3[] = {0x1f, 0x78, 0xc1, 0x0f, 0x38, 0xe0, 0xc0, 0x00, 0x00, 0x02, 0x0e, 0x0e, 0x8e, 0xc6, 0xc0, 0x40, 0x40, 0xc0, 0xc6, 0x8e, 0x0e, 0x0e, 0x02, 0x00, 0x80, 0xc0, 0x60, 0x38, 0x0f, 0xc0, 0x7c, 0x0f};
+    static const char PROGMEM logo_4[] = {0x00, 0x00, 0x01, 0x03, 0x06, 0x0c, 0x18, 0x31, 0x23, 0x66, 0x44, 0x44, 0xc4, 0xc4, 0x84, 0x84, 0x84, 0x84, 0xc4, 0xc4, 0x44, 0x46, 0x66, 0x23, 0x11, 0x18, 0x0c, 0x06, 0x03, 0x00, 0x00, 0x00};
+    oled_set_cursor(0, 0);
+    oled_write_raw_P(logo_1, sizeof(logo_1));
+    oled_set_cursor(0, 1);
+    oled_write_raw_P(logo_2, sizeof(logo_2));
+    oled_set_cursor(0, 2);
+    oled_write_raw_P(logo_3, sizeof(logo_3));
+    oled_set_cursor(0, 3);
+    oled_write_raw_P(logo_4, sizeof(logo_4));
+}
+//-----------
+
+bool oled_task_kb(void) {
+    if (!oled_task_user()) { return false; }
+    render_logo();
+    oled_set_cursor(7, 0);
+    oled_write_P(PSTR("The Mad Noodle"), false);
+
+    oled_set_cursor(7, 1);
+    oled_write_P(PSTR("Layer: "), false);
+
+    /*
+    To change LAYER NAMES displayed on the OLED ensure they are a total of 6 characters, including spaces.
+    Example:
+    ---------------------------------------------------
+    case 0:
+          oled_write_P(PSTR("Base  "), false);
+          break;
+    ---------------------------------------------------
+    "B A S E *SPACE* *SPACE*" = 6 characters
+    This would change layer 0 to Base on the OLED
+    */
+
+    switch (get_highest_layer(layer_state)) {
+        case 0:
+            oled_write_P(PSTR("Zero  "), false);
+            break;
+        case 1:
+            oled_write_P(PSTR("One   "), false);
+            break;
+        case 2:
+            oled_write_P(PSTR("Two   "), false);
+            break;
+        case 3:
+            oled_write_P(PSTR("Three "), false);
+            break;
+
+        default:
+            oled_write_P(PSTR("N/A   "), false);
+    }
+    oled_set_cursor(7, 2);
+    oled_write_P(PSTR("Status: "), false);
+    oled_set_cursor(7, 3);
+    led_t led_state = host_keyboard_led_state();
+    oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR("   "), false);
+    oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("   "), false);
+    oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("   "), false);
+
+    return false;
+}
+
+#endif