Add mmoskal/uf2-stm32f103 bootloader support

builddefs/mcu_selection.mk

@@ -275,7 +275,11 @@ ifneq ($(findstring STM32F103, $(MCU)),)
   # Linker script to use
   # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
   #   or <keyboard_dir>/ld/
-  MCU_LDSCRIPT ?= STM32F103x8
+  ifeq ($(strip $(BOOTLOADER)), uf2boot)
+    MCU_LDSCRIPT ?= STM32F103xB_uf2boot
+  else
+    MCU_LDSCRIPT ?= STM32F103x8
+  endif
 
   # Startup code to use
   #  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/

data/schemas/keyboard.jsonschema

@@ -171,6 +171,7 @@
                 "stm32-dfu",
                 "stm32duino",
                 "tinyuf2",
+                "uf2boot",
                 "unknown",
                 "usbasploader",
                 "wb32-dfu"

docs/flashing.md

@@ -363,6 +363,47 @@ CLI Flashing sequence:
 
 * `:uf2-split-left` and `:uf2-split-right`: Flashes the firmware but also sets the handedness setting in EEPROM by generating a side specific firmware.
 
+## uf2boot
+
+Keyboards may opt into supporting the uf2boot bootloader. This is currently only supported on the F103 bluepill.
+
+The `rules.mk` setting for this bootloader is `uf2boot`, and can be specified at the keymap or user level.
+
+To ensure compatibility with the uf2boot bootloader, make sure this block is present in your `rules.mk`:
+
+```make
+# Bootloader selection
+BOOTLOADER = uf2boot
+```
+
+Compatible flashers:
+
+* Any application able to copy a file from one place to another, such as _macOS Finder_ or _Windows Explorer_.
+
+Flashing sequence:
+
+1. Enter the bootloader using any of the following methods:
+    * Tap the `QK_BOOT` keycode
+    * Double-tap the `nRST` button on the PCB.
+2. Wait for the OS to detect the device
+3. Copy the .uf2 file to the new USB disk
+4. Wait for the keyboard to become available
+
+or
+
+CLI Flashing sequence:
+
+1. Enter the bootloader using any of the following methods:
+    * Tap the `QK_BOOT` keycode
+    * Double-tap the `nRST` button on the PCB.
+2. Wait for the OS to detect the device
+3. Flash via QMK CLI eg. `qmk flash --keyboard handwired/onekey/bluepill_uf2boot --keymap default`
+4. Wait for the keyboard to become available
+
+### `make` Targets
+
+* `:uf2-split-left` and `:uf2-split-right`: Flashes the firmware but also sets the handedness setting in EEPROM by generating a side specific firmware.
+
 ## Raspberry Pi RP2040 UF2
 
 The `rules.mk` setting for this bootloader is `rp2040`, and can be specified at the keymap or user level.

keyboards/handwired/onekey/bluepill_uf2boot/config.h

@@ -0,0 +1,26 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+#define BACKLIGHT_PWM_DRIVER  PWMD2
+#define BACKLIGHT_PWM_CHANNEL 1
+
+#define ADC_PIN A0
+
+#define RGB_CI_PIN A2

keyboards/handwired/onekey/bluepill_uf2boot/halconf.h

@@ -0,0 +1,28 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ *    `qmk chibios-confmigrate -i keyboards/handwired/onekey/bluepill/halconf.h -r platforms/chibios/common/configs/halconf.h`
+ */
+
+#pragma once
+
+#define HAL_USE_ADC TRUE
+
+#define HAL_USE_PWM TRUE
+
+#include_next <halconf.h>

keyboards/handwired/onekey/bluepill_uf2boot/info.json

@@ -0,0 +1,15 @@
+{
+    "keyboard_name": "Onekey Bluepill STM32F103 uf2boot",
+    "development_board": "bluepill",
+    "bootloader": "uf2boot",
+    "matrix_pins": {
+        "cols": ["B0"],
+        "rows": ["A7"]
+    },
+    "backlight": {
+        "pin": "A0"
+    },
+    "rgblight": {
+        "pin": "A1"
+    }
+}

keyboards/handwired/onekey/bluepill_uf2boot/mcuconf.h

@@ -0,0 +1,33 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ *    `qmk chibios-confmigrate -i keyboards/handwired/onekey/bluepill/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h`
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_ADC_USE_ADC1
+#define STM32_ADC_USE_ADC1 TRUE
+
+#undef STM32_PWM_USE_TIM2
+#define STM32_PWM_USE_TIM2 TRUE
+
+#undef STM32_SPI_USE_SPI2
+#define STM32_SPI_USE_SPI2 FALSE

keyboards/handwired/onekey/bluepill_uf2boot/readme.md

@@ -0,0 +1,7 @@
+# Bluepill onekey
+
+To trigger keypress, short together pins *B0* and *A7*.
+
+This variant requires the uf2-stm32f103 bootloader to be installed. This can be downloaded from the [uf2-stm32f103 releases page](https://github.com/mmoskal/uf2-stm32f103/releases).
+
+Double-tap reset to enter bootloader mode. Copy the built uf2 file to the device by dragging the file to the new USB disk.

keyboards/handwired/onekey/bluepill_uf2boot/rules.mk

@@ -0,0 +1,2 @@
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

platforms/chibios/boards/common/ld/STM32F103xB_uf2boot.ld

@@ -0,0 +1,88 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * ST32F103xB memory setup.
+ */
+MEMORY
+{
+    flash0 (rx) : org = 0x08000000 + 16K, len = 128k - 16K
+    flash1 (rx) : org = 0x00000000, len = 0
+    flash2 (rx) : org = 0x00000000, len = 0
+    flash3 (rx) : org = 0x00000000, len = 0
+    flash4 (rx) : org = 0x00000000, len = 0
+    flash5 (rx) : org = 0x00000000, len = 0
+    flash6 (rx) : org = 0x00000000, len = 0
+    flash7 (rx) : org = 0x00000000, len = 0
+    ram0   (wx) : org = 0x20000000, len = 20k
+    ram1   (wx) : org = 0x00000000, len = 0
+    ram2   (wx) : org = 0x00000000, len = 0
+    ram3   (wx) : org = 0x00000000, len = 0
+    ram4   (wx) : org = 0x00000000, len = 0
+    ram5   (wx) : org = 0x00000000, len = 0
+    ram6   (wx) : org = 0x00000000, len = 0
+    ram7   (wx) : org = 0x00000000, len = 0
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash0);
+REGION_ALIAS("XTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash0);
+REGION_ALIAS("TEXT_FLASH_LMA", flash0);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash0);
+REGION_ALIAS("RODATA_FLASH_LMA", flash0);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash0);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash0);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld
+
+/* Bootloader reset support */
+_board_magic_reg = ORIGIN(ram0) + 16k; /* this is based off the code within backup.c */

platforms/chibios/bootloader.mk

@@ -104,6 +104,11 @@ ifeq ($(strip $(BOOTLOADER)), tinyuf2)
     BOOTLOADER_TYPE = tinyuf2
     FIRMWARE_FORMAT = uf2
 endif
+ifeq ($(strip $(BOOTLOADER)), uf2boot)
+    OPT_DEFS += -DBOOTLOADER_UF2BOOT
+    BOOTLOADER_TYPE = uf2boot
+    FIRMWARE_FORMAT = uf2
+endif
 ifeq ($(strip $(BOOTLOADER)), rp2040)
     OPT_DEFS += -DBOOTLOADER_RP2040
     BOOTLOADER_TYPE = rp2040

platforms/chibios/bootloaders/uf2boot.c

@@ -0,0 +1,23 @@
+// Copyright 2023 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bootloader.h"
+
+// From mmoskal/uf2-stm32f103's backup.c
+#define MAGIC_BOOT 0x544F4F42UL
+
+// defined by linker script
+extern uint32_t _board_magic_reg[];
+#define MAGIC_REG _board_magic_reg[0]
+
+void bootloader_jump(void) {
+    MAGIC_REG = MAGIC_BOOT;
+    NVIC_SystemReset();
+}
+
+void mcu_reset(void) {
+    NVIC_SystemReset();
+}
+
+/* not needed, no two-stage reset */
+void enter_bootloader_mode_if_requested(void) {}

platforms/chibios/flash.mk

@@ -109,6 +109,8 @@ else ifeq ($(strip $(BOOTLOADER)),kiibohd)
 	$(UNSYNC_OUTPUT_CMD) && $(call EXEC_DFU_UTIL)
 else ifeq ($(strip $(BOOTLOADER)),tinyuf2)
 	$(UNSYNC_OUTPUT_CMD) && $(call EXEC_UF2_UTIL_DEPLOY)
+else ifeq ($(strip $(BOOTLOADER)),uf2boot)
+	$(UNSYNC_OUTPUT_CMD) && $(call EXEC_UF2_UTIL_DEPLOY)
 else ifeq ($(strip $(BOOTLOADER)),rp2040)
 	$(UNSYNC_OUTPUT_CMD) && $(call EXEC_UF2_UTIL_DEPLOY)
 else ifeq ($(strip $(MCU_FAMILY)),KINETIS)