LFKeyboards Mini1800: refactor into revisions

keyboards/lfkeyboards/mini1800/config.h

@@ -23,7 +23,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT_ID      0x6060
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    LFKeyboards
-#define PRODUCT         LFK87
+#define PRODUCT         Mini1800
 
 #define DIODE_DIRECTION COL2ROW
 

keyboards/lfkeyboards/mini1800/info.json

@@ -1,10 +1,97 @@
 {
     "keyboard_name": "Mini1800",
     "url": "",
-    "maintainer": "qmk",
+    "maintainer": "lfkeyboards",
     "layouts": {
         "LAYOUT": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Back Space", "x":13, "y":0, "w":2}, {"label":"Num Lock", "x":15.5, "y":0}, {"label":"/", "x":16.5, "y":0}, {"label":"*", "x":17.5, "y":0}, {"label":"-", "x":18.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"7", "x":15.5, "y":1}, {"label":"8", "x":16.5, "y":1}, {"label":"9", "x":17.5, "y":1}, {"label":"+", "x":18.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.25}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"4", "x":15.5, "y":2}, {"label":"5", "x":16.5, "y":2}, {"label":"6", "x":17.5, "y":2}, {"label":"+", "x":18.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"1", "x":15.5, "y":3}, {"label":"2", "x":16.5, "y":3}, {"label":"3", "x":17.5, "y":3}, {"label":"Enter", "x":18.5, "y":3, "h":2}, {"label":"\u2191", "x":14.25, "y":3.25}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Ctrl", "x":12, "y":4}, {"label":"0", "x":16.5, "y":4}, {"label":".", "x":17.5, "y":4}, {"label":"\u2190", "x":13.25, "y":4.25}, {"label":"\u2193", "x":14.25, "y":4.25}, {"label":"\u2192", "x":15.25, "y":4.25}]
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"1!", "x":1, "y":0},
+                {"label":"2@", "x":2, "y":0},
+                {"label":"3#", "x":3, "y":0},
+                {"label":"4$", "x":4, "y":0},
+                {"label":"5%", "x":5, "y":0},
+                {"label":"6^", "x":6, "y":0},
+                {"label":"7&", "x":7, "y":0},
+                {"label":"8*", "x":8, "y":0},
+                {"label":"9(", "x":9, "y":0},
+                {"label":"0)", "x":10, "y":0},
+                {"label":"-_", "x":11, "y":0},
+                {"label":"=+", "x":12, "y":0},
+                {"label":"Back Space", "x":13, "y":0, "w":2},
+                {"label":"Num Lock", "x":15.5, "y":0},
+                {"label":"/", "x":16.5, "y":0},
+                {"label":"*", "x":17.5, "y":0},
+                {"label":"-", "x":18.5, "y":0},
+
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"[{", "x":11.5, "y":1},
+                {"label":"]}", "x":12.5, "y":1},
+                {"label":"\\|", "x":13.5, "y":1, "w":1.5},
+                {"label":"7", "x":15.5, "y":1},
+                {"label":"8", "x":16.5, "y":1},
+                {"label":"9", "x":17.5, "y":1},
+                {"label":"+", "x":18.5, "y":1},
+
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.25},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":";:", "x":10.75, "y":2},
+                {"label":"'\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"4", "x":15.5, "y":2},
+                {"label":"5", "x":16.5, "y":2},
+                {"label":"6", "x":17.5, "y":2},
+                {"label":"+", "x":18.5, "y":2},
+
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":",<", "x":9.25, "y":3},
+                {"label":".>", "x":10.25, "y":3},
+                {"label":"/?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+                {"label":"\u2191", "x":14.25, "y":3.25},
+                {"label":"1", "x":15.5, "y":3},
+                {"label":"2", "x":16.5, "y":3},
+                {"label":"3", "x":17.5, "y":3},
+                {"label":"Enter", "x":18.5, "y":3, "h":2},
+
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"Win", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"label":"Space", "x":3.75, "y":4, "w":6.25},
+                {"label":"Alt", "x":10, "y":4},
+                {"label":"Fn", "x":11, "y":4},
+                {"label":"Ctrl", "x":12, "y":4},
+                {"label":"\u2190", "x":13.25, "y":4.25},
+                {"label":"\u2193", "x":14.25, "y":4.25},
+                {"label":"\u2192", "x":15.25, "y":4.25},
+                {"label":"0", "x":16.5, "y":4},
+                {"label":".", "x":17.5, "y":4}
+            ]
         }
     }
 }

keyboards/lfkeyboards/mini1800/keymaps/ca178858/rules.mk

@@ -1,45 +1 @@
-BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no            # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes           # Audio control and System control(+450)
-CONSOLE_ENABLE = no             # Console for debug(+400)
-COMMAND_ENABLE = no             # Commands for debug and configuration
-NKRO_ENABLE = yes
-BACKLIGHT_ENABLE = yes           # Enable keyboard backlight functionality
-MIDI_ENABLE = no                # MIDI controls
-AUDIO_ENABLE = yes              # Audio output on port C6
-UNICODE_ENABLE = no             # Unicode
-BLUETOOTH_ENABLE = no           # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes           # Enable RGB underlight
-RGBLIGHT_CUSTOM_DRIVER = yes    # RGB code is implemented in lefkeyboards, not WS2812
-SLEEP_LED_ENABLE = yes
 TAP_DANCE_ENABLE = yes
-
-ISSI_ENABLE = yes			# If the I2C pullup resistors aren't install this must be disabled
-WATCHDOG_ENABLE = yes		# Resets keyboard if matrix_scan isn't run every 250ms
-
-
-
-ifeq ($(strip $(ISSI_ENABLE)), yes)
-    TMK_COMMON_DEFS += -DISSI_ENABLE
-endif
-
-ifeq ($(strip $(WATCHDOG_ENABLE)), yes)
-    TMK_COMMON_DEFS += -DWATCHDOG_ENABLE
-endif
-
-
-# # Set the LFK78 hardware version. This is defined in rules.mk, but can be overidden here if desired
-# #
-# # RevB - first public release, uses atmega32u4, has audio, ISSI matrix split between RGB and backlight
-# # RevC/D - at90usb1286, no audio, ISSI device 0 is backlight, 4 is RGB
-# #
-# # Set to B, C or D
-# LFK_REV = D
-
-# ifeq ($(LFK_REV), B)
-# 	MCU = atmega32u4
-# else
-# 	MCU = at90usb1286
-# endif
-# OPT_DEFS += -DLFK_REV_$(LFK_REV)
-# OPT_DEFS += -DUSB_PRODUCT=\"LFK_Rev$(LFK_REV)\"

keyboards/lfkeyboards/mini1800/readme.md

@@ -1,12 +1,26 @@
-Mini1800
-===
+# Mini1800
 
-Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards)  
-Hardware Supported: Mini1800  
-Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/)
+* Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards)
+* Hardware Supported:
+  * [Mini1800 RevA](reva/) - Green PCB with AT90USB1286
+  * [Mini1800 RevC](revc/) - Black PCB with AT90USB646; first public release
+* Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make lfkeyboards/mini1800:default
+    make lfkeyboards/mini1800/reva:default
+    make lfkeyboards/mini1800/revc:default
 
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. 
+Flashing example for this keyboard:
+
+    make lfkeyboards/mini1800/reva:default:flash
+    make lfkeyboards/mini1800/revc:default:flash
+
+## Bootloader
+
+To reset the board into bootloader mode, do one of the following:
+
+* **Physical reset button**: Briefly press the button on the bottom of the PCB (between Q and W keys)
+* **Keycode in keymap**: Press the key mapped to `RESET` if it is available (`Fn`+`Right Shift`, then tap `Enter` by default)
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/lfkeyboards/mini1800/reva/post_rules.mk

@@ -0,0 +1,7 @@
+ifeq ($(strip $(ISSI_ENABLE)), yes)
+    TMK_COMMON_DEFS += -DISSI_ENABLE
+endif
+
+ifeq ($(strip $(WATCHDOG_ENABLE)), yes)
+    TMK_COMMON_DEFS += -DWATCHDOG_ENABLE
+endif

keyboards/lfkeyboards/mini1800/reva/readme.md

@@ -0,0 +1,22 @@
+# Mini1800 RevA
+
+* Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards)
+* Hardware Supported: Mini1800 RevA (Green PCB with AT90USB1286)
+* Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make lfkeyboards/mini1800/reva:default
+
+Flashing example for this keyboard:
+
+    make lfkeyboards/mini1800/reva:default:flash
+
+## Bootloader
+
+To reset the board into bootloader mode, do one of the following:
+
+* **Physical reset button**: Briefly press the button on the bottom of the PCB (between Q and W keys)
+* **Keycode in keymap**: Press the key mapped to `RESET` if it is available (`Fn`+`Right Shift`, then tap `Enter` by default)
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/lfkeyboards/mini1800/reva/rules.mk

@@ -0,0 +1,29 @@
+# MCU name
+MCU = at90usb1286
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Enable N-Key Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+AUDIO_ENABLE = yes          # Audio output
+
+# RGB code is implemented in lfkeyboards, not WS2812
+RGBLIGHT_CUSTOM_DRIVER = yes
+BACKLIGHT_DRIVER = custom
+SLEEP_LED_ENABLE = yes
+
+ISSI_ENABLE = yes           # If the I2C pullup resistors aren't install this must be disabled
+WATCHDOG_ENABLE = yes       # Resets keyboard if matrix_scan isn't run every 250ms
+
+# Extra source files for IS3731 lighting
+SRC = TWIlib.c issi.c lighting.c

keyboards/lfkeyboards/mini1800/revc/post_rules.mk

@@ -0,0 +1,7 @@
+ifeq ($(strip $(ISSI_ENABLE)), yes)
+    TMK_COMMON_DEFS += -DISSI_ENABLE
+endif
+
+ifeq ($(strip $(WATCHDOG_ENABLE)), yes)
+    TMK_COMMON_DEFS += -DWATCHDOG_ENABLE
+endif

keyboards/lfkeyboards/mini1800/revc/readme.md

@@ -0,0 +1,24 @@
+# Mini1800 RevC
+
+The first public release of the Mini1800.
+
+* Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards)
+* Hardware Supported: Mini1800 RevC (Black PCB with AT90USB646)
+* Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make lfkeyboards/mini1800/revc:default
+
+Flashing example for this keyboard:
+
+    make lfkeyboards/mini1800/revc:default:flash
+
+## Bootloader
+
+To reset the board into bootloader mode, do one of the following:
+
+* **Physical reset button**: Briefly press the button on the bottom of the PCB (between Q and W keys)
+* **Keycode in keymap**: Press the key mapped to `RESET` if it is available (`Fn`+`Right Shift`, then tap `Enter` by default)
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/lfkeyboards/mini1800/revc/rules.mk

@@ -0,0 +1,29 @@
+# MCU name
+MCU = at90usb646
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Enable N-Key Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+AUDIO_ENABLE = yes          # Audio output
+
+# RGB code is implemented in lfkeyboards, not WS2812
+RGBLIGHT_CUSTOM_DRIVER = yes
+BACKLIGHT_DRIVER = custom
+SLEEP_LED_ENABLE = yes
+
+ISSI_ENABLE = yes           # If the I2C pullup resistors aren't install this must be disabled
+WATCHDOG_ENABLE = yes       # Resets keyboard if matrix_scan isn't run every 250ms
+
+# Extra source files for IS3731 lighting
+SRC = TWIlib.c issi.c lighting.c