Add MK61-RGB-ANSI keyboard

keyboards/fjlabs/mk61rgbansi/config.h

@@ -0,0 +1,121 @@
+/*
+Copyright 2021 <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x7074 // FJLabs
+#define PRODUCT_ID   0x1011 // mk61-rgb-ansi
+#define DEVICE_VER   0x0001 // Version 1
+#define MANUFACTURER    Mechanical Keyboards LLC
+#define PRODUCT         MK61-RGB-ANSI
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+
+// Checked with Eagle Schematic
+#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6  }
+#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, B3, B2, B1 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Define RGB Underglow */
+#define RGB_DI_PIN F7
+#define RGBLED_NUM 64
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_TWINKLE
+#define RGBLIGHT_LIMIT_VAL 108
+#define RGB_VAL_STEP 12
+#define RGBLIGHT_DEFAULT_SPD 144
+#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL
+/* #define RGBLIGHT_LAYER_BLINK*/
+
+/* Define less important options */
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/fjlabs/mk61rgbansi/info.json

@@ -0,0 +1,76 @@
+{
+    "keyboard_name": "MK61-RGB-ANSI",
+    "url": "https://www.fjlaboratories.com/",
+    "maintainer": "Mechanical Keyboards, LLC",
+    "layouts": {
+        "LAYOUT_60_ansi": {
+            "layout": [
+                {"x": 0, "y": 0},
+                {"x": 1, "y": 0},
+                {"x": 2, "y": 0},
+                {"x": 3, "y": 0},
+                {"x": 4, "y": 0},
+                {"x": 5, "y": 0},
+                {"x": 6, "y": 0},
+                {"x": 7, "y": 0},
+                {"x": 8, "y": 0},
+                {"x": 9, "y": 0},
+                {"x": 10, "y": 0},
+                {"x": 11, "y": 0},
+                {"x": 12, "y": 0},
+                {"x": 13, "y": 0, "w": 2},
+
+                {"x": 0, "y": 1, "w": 1.5},
+                {"x": 1.5, "y": 1},
+                {"x": 2.5, "y": 1},
+                {"x": 3.5, "y": 1},
+                {"x": 4.5, "y": 1},
+                {"x": 5.5, "y": 1},
+                {"x": 6.5, "y": 1},
+                {"x": 7.5, "y": 1},
+                {"x": 8.5, "y": 1},
+                {"x": 9.5, "y": 1},
+                {"x": 10.5, "y": 1},
+                {"x": 11.5, "y": 1},
+                {"x": 12.5, "y": 1},
+                {"x": 13.5, "y": 1, "w": 1.5},
+
+                {"x": 0, "y": 2, "w": 1.75},
+                {"x": 1.75, "y": 2},
+                {"x": 2.75, "y": 2},
+                {"x": 3.75, "y": 2},
+                {"x": 4.75, "y": 2},
+                {"x": 5.75, "y": 2},
+                {"x": 6.75, "y": 2},
+                {"x": 7.75, "y": 2},
+                {"x": 8.75, "y": 2},
+                {"x": 9.75, "y": 2},
+                {"x": 10.75, "y": 2},
+                {"x": 11.75, "y": 2},
+                {"x": 12.75, "y": 2, "w": 2.25},
+
+                {"x": 0, "y": 3, "w": 2.25},
+                {"x": 2.25, "y": 3},
+                {"x": 3.25, "y": 3},
+                {"x": 4.25, "y": 3},
+                {"x": 5.25, "y": 3},
+                {"x": 6.25, "y": 3},
+                {"x": 7.25, "y": 3},
+                {"x": 8.25, "y": 3},
+                {"x": 9.25, "y": 3},
+                {"x": 10.25, "y": 3},
+                {"x": 11.25, "y": 3},
+                {"x": 12.25, "y": 3, "w": 2.75},
+
+                {"x": 0, "y": 4, "w": 1.25},
+                {"x": 1.25, "y": 4, "w": 1.25},
+                {"x": 2.5, "y": 4, "w": 1.25},
+                {"x": 3.75, "y": 4, "w": 6.25},
+                {"x": 10, "y": 4, "w": 1.25},
+                {"x": 11.25, "y": 4, "w": 1.25},
+                {"x": 12.5, "y": 4, "w": 1.25},
+                {"x": 13.75, "y": 4, "w": 1.25}                
+            ]
+        }
+    }
+}

keyboards/fjlabs/mk61rgbansi/keymaps/default/keymap.c

@@ -0,0 +1,40 @@
+/*
+Copyright 2021 <[email protected]>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _LAYER0,
+    _LAYER1,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [_LAYER0] = LAYOUT_60_ansi(
+        KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, 
+        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, 
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTRL
+    ),
+
+    [_LAYER1] = LAYOUT_60_ansi(
+        KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, 
+        KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUSE, RESET, 
+        KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+
+};

keyboards/fjlabs/mk61rgbansi/keymaps/via/keymap.c

@@ -0,0 +1,58 @@
+/*
+Copyright 2021 <[email protected]>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _LAYER0,
+    _LAYER1,
+    _LAYER2,
+    _LAYER3,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [_LAYER0] = LAYOUT_60_ansi(
+        KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, 
+        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, 
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTRL
+    ),
+
+    [_LAYER1] = LAYOUT_60_ansi(
+        KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, 
+        KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUSE, RESET, 
+        KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+    [_LAYER2] = LAYOUT_60_ansi(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+    [_LAYER3] = LAYOUT_60_ansi(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+};

keyboards/fjlabs/mk61rgbansi/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/fjlabs/mk61rgbansi/mk61rgbansi.c

@@ -0,0 +1,13 @@
+/* Copyright 2021 <[email protected]>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "mk61rgbansi.h"

keyboards/fjlabs/mk61rgbansi/mk61rgbansi.h

@@ -0,0 +1,32 @@
+/*
+Copyright 2021 <[email protected]>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+/* MK61-RGB-ANSI Keymap Definitions */
+#define LAYOUT_60_ansi( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,      K3C,      \
+    K40, K41, K42,           K45,                K49, K4A,      K4C, K4D  \
+) { \
+    { K00, K01, K02, K03,   K04,     K05,   K06,   K07,   K08,   K09, K0A, K0B,   K0C,   K0D   }, \
+    { K10, K11, K12, K13,   K14,     K15,   K16,   K17,   K18,   K19, K1A, K1B,   K1C,   K1D   }, \
+    { K20, K21, K22, K23,   K24,     K25,   K26,   K27,   K28,   K29, K2A, K2B,   KC_NO, K2D   }, \
+    { K30, K31, K32, K33,   K34,     K35,   K36,   K37,   K38,   K39, K3A, KC_NO, K3C,   KC_NO }, \
+    { K40, K41, K42, KC_NO, KC_NO,   K45,   KC_NO, KC_NO, KC_NO, K49, K4A, KC_NO, K4C,   K4D   }  \
+}

keyboards/fjlabs/mk61rgbansi/readme.md

@@ -0,0 +1,14 @@
+# Mechanical Keyboards, LLC MK61-RGB-ANSI 
+
+The following is the QMK Firmware for the Mechanical Keyboards, LLC MK61-RGB-ANSI PCB.
+
+---
+
+* Keyboard Maintainer: Mechanical Keyboards, LLC
+* Hardware Supported: MK61-RGB-ANSI
+
+Make example for this keyboard (after setting up your build environment):
+
+    make fjlabs/mk61-rgb-ansi:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). You can enter the bootloader by pressing the reset button on the back of the PCB.

keyboards/fjlabs/mk61rgbansi/rules.mk

@@ -0,0 +1,26 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency
+F_CPU = 8000000
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+LAYOUTS = 60_ansi