ADD BINEPAD/BN003

keyboards/binepad/bn003/bn003.c

@@ -0,0 +1,16 @@
+/* Copyright 2020 BINEPAD
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "bn003.h"

keyboards/binepad/bn003/bn003.h

@@ -0,0 +1,23 @@
+/* Copyright 2020 BINEPAD
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "quantum.h"
+
+#define LAYOUT( \
+    K00, K01, K02 \
+) { \
+    { K00, K01, K02 } \
+}
+

keyboards/binepad/bn003/config.h

@@ -0,0 +1,91 @@
+/* Copyright 2020 BINEPAD
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4249 // Binepad
+#define PRODUCT_ID      0x4287
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Binepad
+#define PRODUCT         BN003
+
+/* Key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 3
+
+#define MATRIX_ROW_PINS { C6 }
+#define MATRIX_COL_PINS { B4, B5, B6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+#define RGB_BACKLIGHT_ENABLED 0

keyboards/binepad/bn003/info.json

@@ -0,0 +1,28 @@
+{
+  "keyboard_name": "BN003",
+  "url": "https://binepad.com",
+  "maintainer": "binepad",
+  "width": 3,
+  "height": 1,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        {
+          "label": "K0",
+          "x": 0,
+          "y": 0
+        },
+        {
+          "label": "K1",
+          "x": 1,
+          "y": 0
+        },
+        {
+          "label": "K2",
+          "x": 2,
+          "y": 0
+        }
+      ]
+    }
+  }
+}

keyboards/binepad/bn003/keymaps/default/keymap.c

@@ -0,0 +1,19 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_0,
+        KC_1,
+        KC_2
+    ),
+    [1] = LAYOUT(
+        KC_NO,
+        KC_NO,
+        KC_NO
+    ),
+    [2] = LAYOUT(
+        KC_NO,
+        KC_NO,
+        KC_NO
+    )
+};

keyboards/binepad/bn003/keymaps/default/readme.md

@@ -0,0 +1 @@
+# bn003 - Default layout

keyboards/binepad/bn003/keymaps/via/keymap.c

@@ -0,0 +1,24 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_0,
+        KC_1,
+        KC_2
+    ),
+    [1] = LAYOUT(
+        KC_NO,
+        KC_NO,
+        KC_NO
+    ),
+    [2] = LAYOUT(
+        KC_NO,
+        KC_NO,
+        KC_NO
+    ),
+    [3] = LAYOUT(
+        KC_NO,
+        KC_NO,
+        KC_NO
+    )
+};

keyboards/binepad/bn003/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+EXTRAKEY_ENABLE = yes
+VIA_ENABLE = yes

keyboards/binepad/bn003/readme.md

@@ -0,0 +1,17 @@
+# BINEPAD BN003
+
+![BINEPAD BN003](https://imgur.com/q8JPcNEl.jpg)
+
+A 3% macropad.
+
+* Keyboard Maintainer: [BINEPAD]
+* Hardware Supported: BN003 PCB (ATmega32U4)
+* Hardware Availability: [Interest Check](https://www.binepad.com/bn003)
+
+Make example for this keyboard (after setting up your build environment):
+
+```
+make binepad/bn003:default
+```
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/binepad/bn003/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output