New Keyboard "KiwiKeebs MacroBoard v1.0"

keyboards/kiwikeebs/macro/config.h

@@ -0,0 +1,108 @@
+/*
+Copyright 2020 KiwiKeebs
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0x4712
+#define DEVICE_VER   0x0001
+#define MANUFACTURER KiwiKeebs
+#define PRODUCT      MacroBoard v.1.0
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { E6, D7 }
+#define MATRIX_COL_PINS { F7, B1, B3, B2 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define ENCODERS_PAD_A { D1 }
+#define ENCODERS_PAD_B { D0 }
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/kiwikeebs/macro/info.json

@@ -0,0 +1,21 @@
+{
+    "keyboard_name": "KiwiKeebs MacroBoard v.10",
+    "url": "https://www.reddit.com/r/mechmarket/comments/ibijrd/ic_kiwikeebs_6key_macroboard_rotary_encoder_diy/",
+    "maintainer": "KiwiKeebs",
+    "width": 5,
+    "height": 2,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                { "label": "k00", "x": 0, "y": 0 },
+                { "label": "k01", "x": 1, "y": 0 },
+                { "label": "k02", "x": 2, "y": 0 },
+
+                { "label": "k03", "x": 0, "y": 1 },
+                { "label": "k04", "x": 1, "y": 1 },
+                { "label": "k05", "x": 2, "y": 1 },
+                { "label": "k06", "x": 3, "y": 0, "h":2, "w":2 }
+            ]
+        }
+    }
+}

keyboards/kiwikeebs/macro/keymaps/default/keymap.c

@@ -0,0 +1,34 @@
+/* Copyright 2020 KiwiKeebs
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT(
+        KC_DEL,  KC_HOME, LT(_FN,KC_END),
+        KC_MPRV, KC_MPLY, KC_MNXT, KC_MUTE
+    ),
+    [_FN] = LAYOUT(
+        KC_1,    KC_UP,   _______,
+        KC_LEFT, KC_DOWN, KC_RGHT, _______
+    )
+};

keyboards/kiwikeebs/macro/macro.c

@@ -0,0 +1,27 @@
+/* Copyright 2020 KiwiKeebs
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "macro.h"
+
+void encoder_update_kb(uint8_t index, bool clockwise) {
+    if (index == 0) { /* First encoder */
+        if (clockwise) {
+            tap_code(KC_AUDIO_VOL_UP);
+        } else {
+            tap_code(KC_AUDIO_VOL_DOWN);
+        }
+    }
+}

keyboards/kiwikeebs/macro/macro.h

@@ -0,0 +1,35 @@
+/* Copyright 2020 KiwiKeebs
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k00, k01, k02, \
+    k03, k04, k05, k06    \
+) { \
+    { k00, k01, k02, KC_NO }, \
+    { k03, k04, k05, k06 }  \
+}

keyboards/kiwikeebs/macro/rules.mk

@@ -0,0 +1,21 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+ENCODER_ENABLE = yes

keyboards/kiwikeebs/readme.md

@@ -0,0 +1,19 @@
+# KiwiKeebs MacroBoard V1.0
+
+![KiwiKeebs](https://i.imgur.com/h5i9jBl.png)
+
+A 6 Key PCB with Rotary Encoder Knob + Button made from solid CNC aluminium.
+
+* Keyboard Maintainer: [AKiwi92](https://github.com/akiwi92)
+* Hardware Supported: KiwiKeebs MacroBoard V1.0
+* Hardware Availability: [reddit.com](https://www.reddit.com/r/mechmarket/comments/ibijrd/ic_kiwikeebs_6key_macroboard_rotary_encoder_diy/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make kiwikeebsmacro:default
+
+Flashing example for this keyboard:
+
+    make kiwikeebsmacro:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).