Consolidate modelm v2 (#14996)

Co-authored-by: Ryan <[email protected]>
Co-authored-by: Nick Brassel <[email protected]>

data/mappings/keyboard_aliases.hjson

@@ -41,6 +41,9 @@
     "angel64": {
         "target": "angel64/alpha"
     },
+    "ashpil/modelm_usbc": {
+        "target": "ibm/model_m/ashpil_usbc"
+    },
     "at101_blackheart": {
         "target": "viktus/at101_bh"
     },
@@ -113,6 +116,15 @@
     "cmm_studio/saka68": {
         "target": "cmm_studio/saka68/solder"
     },
+    "converter/modelm101": {
+        "target": "ibm/model_m/teensypp"
+    },
+    "converter/modelm101_teensy2": {
+        "target": "ibm/model_m/teensy2"
+    },
+    "converter/modelm_ssk": {
+        "target": "ibm/model_m_ssk/teensypp_ssk"
+    },
     "cospad": {
         "target": "kprepublic/cospad"
     },
@@ -203,6 +215,9 @@
     "handwired/ferris": {
         "target": "ferris/0_1"
     },
+    "handwired/ibm122m": {
+        "target": "ibm/model_m_122/ibm122m"
+    },
     "handwired/p1800fl": {
         "target": "team0110/p1800fl"
     },
@@ -425,6 +440,9 @@
     "montsinger/rebound": {
         "target": "montsinger/rebound/rev1"
     },
+    "mschwingen/modelm": {
+        "target": "ibm/model_m/mschwingen"
+    },
     "noxary/268_2": {
         "layouts": {
             "LAYOUT": "LAYOUT_65_ansi_blocker"
@@ -1246,6 +1264,9 @@
     "treadstone48/rev2": {
         "target": "marksard/treadstone48/rev2"
     },
+    "tronguylabs/m122_3270": {
+        "target": "ibm/model_m_122/m122_3270"
+    },
     "ua62": {
         "target": "nacly/ua62"
     },
@@ -1306,6 +1327,9 @@
     "ymdk_np21": {
         "target": "ymdk/np21"
     },
+    "yugo_m/model_m_101": {
+        "target": "ibm/model_m/yugo_m"
+    },
     "yurei": {
         "target": "kkatano/yurei"
     },

docs/ChangeLog/20230528/PR14996.md

@@ -0,0 +1,21 @@
+# QMK Breaking Changes - 2023 May 28 Changelog
+
+## Notable Features :id=notable-features
+
+### Consolidate modelm ([#14996](https://github.com/qmk/qmk_firmware/pull/14996)
+
+Several build targets for the IBM Model M were cluttered in different folders.
+The maintainers of several Model M replacement controller projects agreed to
+consolidate them under one common folder.
+
+List of the consolidations now in keyboards/modelm/:
+
+- ashpil_usbc 
+- ibm122m
+- mschwingen
+- teensy2 (renamed from modelm101_teensy2)
+- teensypp (renamed from modelm101)
+- teensypp_ssk (renamed from modelm_ssk)
+- ibm122m
+- m122_3270
+- yugo_m

keyboards/ashpil/modelm_usbc/info.json → keyboards/ibm/model_m/ashpil_usbc/info.json

@@ -1,7 +1,7 @@
 {
     "keyboard_name": "IBM Model M 101/102",
     "manufacturer": "ashpil",
-    "url": "https://github.com/ashpil/qmk_firmware/tree/master/keyboards/ashpil/modelm_usbc",
+    "url": "https://github.com/qmk/qmk_firmware/tree/master/keyboards/ibm/model_m/ashpil_usbc",
     "maintainer": "ashpil",
     "usb": {
         "vid": "0xFEED",

keyboards/ashpil/modelm_usbc/readme.md → keyboards/ibm/model_m/ashpil_usbc/readme.md

@@ -9,6 +9,6 @@ This is a configuration of QMK intended to be used with the [USB C Model M alt c
 
 Make example for this keyboard (after setting up your build environment):
 
-    make ashpil/modelm_usbc:default
+    make ibm/model_m/ashpil_usbc:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ibm/model_m/modelm/readme.md

@@ -0,0 +1,24 @@
+# IBM Model M
+
+This is the parent directory for all projects that replace the controller
+of IBM's Model M Keyboard and then run QMK on it.
+
+These controllers differ in their use of microcontrollers, connection (mainly
+USB) optional speakers etc.
+
+Some of them can be bought fully assembled others are do-it-yourself.
+
+## Warning - Model M Variants
+
+**Not all of these projects will fit into your keyboard!**
+
+As the Model M was produced over several years there are many variants of the
+controller PCB. Check what fits your keyboard before you build/order one.
+
+The variants built for PCs differ in:
+* PCB size
+* Connectors (8/12 pin flex, location)
+* Ground wire connector location
+
+Additionally IBM built Model M variants for terminals with 122 keys, the 
+space saving keyboard (SSK, 84-key) etc.

keyboards/mschwingen/modelm/config.h → keyboards/ibm/model_m/mschwingen/config.h

@@ -56,15 +56,15 @@
 #define MODELM_LED2 B6
 #define MODELM_LED3 D0
 
-#if defined(KEYBOARD_mschwingen_modelm_led_wired)
+#if defined(KEYBOARD_ibm_model_m_mschwingen_led_wired)
 # define MODELM_LED_CAPSLOCK  MODELM_LED1
 # define MODELM_LED_SCROLLOCK MODELM_LED2
 # define MODELM_LED_NUMLOCK   MODELM_LED3
-#elif defined(KEYBOARD_mschwingen_modelm_led_ffc)
+#elif defined(KEYBOARD_ibm_model_m_mschwingen_led_ffc)
 # define MODELM_LED_CAPSLOCK  MODELM_LED2
 # define MODELM_LED_SCROLLOCK MODELM_LED3
 # define MODELM_LED_NUMLOCK   MODELM_LED1
-#elif defined(KEYBOARD_mschwingen_modelm_led_ws2812)
+#elif defined(KEYBOARD_ibm_model_m_mschwingen_led_ws2812)
 #else
 # error one of MODELM_LEDS_FFC, MODELM_LEDS_WIRED or MODELM_LEDS_WS2812 must be set!
 #endif

keyboards/mschwingen/modelm/info.json → keyboards/ibm/model_m/mschwingen/info.json

@@ -1,7 +1,7 @@
 {
-    "keyboard_name": "IBM Model M 101/102",
+    "keyboard_name": "atmega32U4 board for IBM Model M",
     "manufacturer": "mschwingen",
-    "url": "",
+    "url": "https://github.com/qmk/qmk_firmware/tree/master/keyboards/ibm/model_m/mschwingen",
     "maintainer": "mschwingen",
     "usb": {
         "vid": "0xFEED",

keyboards/ibm/model_m/mschwingen/led_ffc/readme.md

@@ -0,0 +1,21 @@
+# atmega32U4 board for IBM Model M, LEDs connected with flexible flat cable (FFC)
+
+![modelm](https://raw.githubusercontent.com/mschwingen/hardware/master/modelm-usb/images/PCB.jpg)
+
+This is a configuration of QMK intended to be used with the [Model M USB PCB](https://github.com/mschwingen/hardware/tree/master/modelm-usb).
+
+* Keyboard Maintainer: [Michael Schwingen](https://github.com/mschwingen/)
+* Hardware Supported: [Model M USB PCB](https://github.com/mschwingen/hardware/tree/master/modelm-usb)
+* Hardware Availability: need to build your own.
+
+Make example for this keyboard (after setting up your build environment), run one of:
+
+    make ibm/model_m/mschwingen/led_ffc:default
+
+Flashing example for this keyboard:
+
+    make ibm/model_m/mschwingen/led_ffc:default:flash
+
+Bootloader: do not use the QMK bootloader, use the bootloader from [here](https://github.com/mschwingen/modelm-lufa-bootloader)
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ibm/model_m/mschwingen/led_wired/readme.md

@@ -0,0 +1,21 @@
+# atmega32U4 board for IBM Model M, LEDs connected with wires
+
+![modelm](https://raw.githubusercontent.com/mschwingen/hardware/master/modelm-usb/images/PCB.jpg)
+
+This is a configuration of QMK intended to be used with the [Model M USB PCB](https://github.com/mschwingen/hardware/tree/master/modelm-usb).
+
+* Keyboard Maintainer: [Michael Schwingen](https://github.com/mschwingen/)
+* Hardware Supported: [Model M USB PCB](https://github.com/mschwingen/hardware/tree/master/modelm-usb)
+* Hardware Availability: need to build your own.
+
+Make example for this keyboard (after setting up your build environment), run one of:
+
+    make ibm/model_m/mschwingen/led_wired:default
+
+Flashing example for this keyboard:
+
+    make ibm/model_m/mschwingen/led_wired:default:flash
+
+Bootloader: do not use the QMK bootloader, use the bootloader from [here](https://github.com/mschwingen/modelm-lufa-bootloader)
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ibm/model_m/mschwingen/led_ws2812/readme.md

@@ -0,0 +1,21 @@
+# atmega32U4 board for IBM Model M, old LEDs replaces with WS2812 RGB LEDs
+
+![modelm](https://raw.githubusercontent.com/mschwingen/hardware/master/modelm-usb/images/PCB.jpg)
+
+This is a configuration of QMK intended to be used with the [Model M USB PCB](https://github.com/mschwingen/hardware/tree/master/modelm-usb).
+
+* Keyboard Maintainer: [Michael Schwingen](https://github.com/mschwingen/)
+* Hardware Supported: [Model M USB PCB](https://github.com/mschwingen/hardware/tree/master/modelm-usb)
+* Hardware Availability: need to build your own.
+
+Make example for this keyboard (after setting up your build environment), run one of:
+
+    make ibm/model_m/mschwingen/led_ws2812:default
+
+Flashing example for this keyboard:
+
+    make ibm/model_m/mschwingen/led_ws2812:default:flash
+
+Bootloader: do not use the QMK bootloader, use the bootloader from [here](https://github.com/mschwingen/modelm-lufa-bootloader)
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/mschwingen/modelm/matrix.c → keyboards/ibm/model_m/mschwingen/matrix.c

@@ -22,7 +22,7 @@
 #include "quantum.h"
 #include "spi_master.h"
 #include "print.h"
-#include "modelm.h"
+#include "mschwingen.h"
 
 #define SPI_TIMEOUT 100
 
@@ -93,7 +93,7 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
 
 void matrix_init_custom(void) {
     unselect_cols();
-    
+
     // set 4MHz SPI clock
     SPSR = 0;
     SPCR = _BV(SPE) | _BV(MSTR) | _BV(CPOL);

keyboards/mschwingen/modelm/modelm.c → keyboards/ibm/model_m/mschwingen/mschwingen.c

@@ -15,12 +15,11 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <util/delay.h>
-#include "modelm.h"
+#include "mschwingen.h"
 #include "uart.h"
 #include "print.h"
 #include "sendchar.h"
 #include "ws2812.h"
-#include "modelm.h"
 #include "sleep_led.h"
 
 #ifdef UART_DEBUG
@@ -36,7 +35,7 @@ static uint16_t blink_cycle_timer;
 static bool     blink_state = false;
 static uint8_t  isRecording = 0;
 
-#ifdef KEYBOARD_mschwingen_modelm_led_ws2812
+#ifdef KEYBOARD_ibm_model_m_mschwingen_led_ws2812
 #    if RGBLED_NUM < 3
 #        error we need at least 3 RGB LEDs!
 #    endif
@@ -81,7 +80,7 @@ void sleep_led_disable(void) {
 void sleep_led_enable(void) {
     suspend_active = true;
     writePinLow(MODELM_STATUS_LED);
-#ifdef KEYBOARD_mschwingen_modelm_led_ws2812
+#ifdef KEYBOARD_ibm_model_m_mschwingen_led_ws2812
     led[0] = black;
     led[1] = black;
     led[2] = black;
@@ -90,7 +89,7 @@ void sleep_led_enable(void) {
 }
 
 void keyboard_pre_init_kb(void) {
-#ifdef KEYBOARD_mschwingen_modelm_led_ws2812
+#ifdef KEYBOARD_ibm_model_m_mschwingen_led_ws2812
     ws2812_setleds(led, RGBLED_NUM);
 #else
     /* Set status LEDs pins to output and Low (on) */
@@ -116,7 +115,7 @@ void keyboard_pre_init_kb(void) {
     writePinLow(SR_CLK_PIN);
 }
 
-#ifdef KEYBOARD_mschwingen_modelm_led_ws2812
+#ifdef KEYBOARD_ibm_model_m_mschwingen_led_ws2812
 static void led_update_rgb(void) {
     if (isRecording && blink_state) {
         led[0] = white;

keyboards/mschwingen/modelm/readme.md → keyboards/ibm/model_m/mschwingen/readme.md

@@ -10,15 +10,15 @@ This is a configuration of QMK intended to be used with the [Model M USB PCB](ht
 
 Make example for this keyboard (after setting up your build environment), run one of:
 
-    make mschwingen/modelm/led_wired:default
-    make mschwingen/modelm/led_ffc:default
-    make mschwingen/modelm/led_ws2812:default
+    make ibm/model_m/mschwingen/led_wired:default
+    make ibm/model_m/mschwingen/led_ffc:default
+    make ibm/model_m/mschwingen/led_ws2812:default
 
 flash:
 
-    make mschwingen/modelm/led_wired:default:flash
-    make mschwingen/modelm/led_ffc:default:flash
-    make mschwingen/modelm/led_ws2812:default:flash
+    make ibm/model_m/mschwingen/led_wired:default:flash
+    make ibm/model_m/mschwingen/led_ffc:default:flash
+    make ibm/model_m/mschwingen/led_ws2812:default:flash
 
 Bootloader: do not use the QMK bootloader, use the bootloader from [here](https://github.com/mschwingen/modelm-lufa-bootloader)
 

keyboards/mschwingen/modelm/rules.mk → keyboards/ibm/model_m/mschwingen/rules.mk

@@ -26,4 +26,4 @@ OPT_DEFS += -DSLEEP_LED_ENABLE # we need our own sleep callbacks to turn of WS28
 
 LTO_ENABLE = yes
 
-DEFAULT_FOLDER = mschwingen/modelm/led_wired
+DEFAULT_FOLDER = ibm/model_m/mschwingen/led_wired

keyboards/converter/modelm101_teensy2/info.json → keyboards/ibm/model_m/teensy2/info.json

@@ -1,7 +1,7 @@
 {
     "keyboard_name": "IBM Model M 101/102",
     "manufacturer": "wangfuco",
-    "url": "https://github.com/wangfuco/qmk_firmware/tree/modelm101_teensy2/keyboards/converter/modelm101_teensy2",
+    "url": "https://github.com/qmk/qmk_firmware/tree/master/keyboards/ibm/model_m/teensy2",
     "maintainer": "wangfuco",
     "usb": {
         "vid": "0xFEED",

keyboards/converter/modelm101_teensy2/readme.md → keyboards/ibm/model_m/teensy2/readme.md

@@ -2,7 +2,7 @@
 
 ![IBM Model M 101 ANSI/102 ISO](https://user-images.githubusercontent.com/46733695/161862805-c891735b-e2e8-418a-ad82-d71c00570eab.jpg)
 
-This is based on the modelm101 keyboard by iw0rm3r. The difference is that Teensy 2.0 board (produced by PJRC) is used instead of the Teensy 2.0++ due to the availability issues. Only CapsLock LED is supported since Teensy 2.0 only has 25 digital I/0 pins.
+This is based on the modelm101 teensypp keyboard by iw0rm3r. The difference is that Teensy 2.0 board (produced by PJRC) is used instead of the Teensy++ 2.0 due to the availability issues. Only CapsLock LED is supported since Teensy 2.0 only has 25 digital I/0 pins.
 
 Configuration is build for the Atmel ATmega32U4 controller, which you can easily use on the Teensy 2.0 board (produced by PJRC).
 
@@ -18,12 +18,12 @@ Status LEDs: CapsLock +5V ScrollLock NumLock
 Pins:        E6       5V  -         -  
 ```  
 
-Keyboard Maintainer: [wangfuco](https://github.com/wangfuco)  
+Keyboard Maintainer: [wangfuco](https://github.com/wangfuco)
 Hardware Supported: Teensy 2.0 board by PJRC  
 Hardware Availability: https://www.pjrc.com/store/teensy.html 
 
 Make example for this keyboard (after setting up your build environment):
 
-    make converter/modelm101_teensy2:default:teensy
+    make ibm/model_m/teensy2:default:teensy
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/converter/modelm101/info.json → keyboards/ibm/model_m/teensypp/info.json

@@ -1,7 +1,7 @@
 {
     "keyboard_name": "IBM Model M 101/102",
     "manufacturer": "iw0rm3r",
-    "url": "https://github.com/iw0rm3r/qmk_firmware/tree/modelm101/keyboards/converter/modelm101",
+    "url": "https://github.com/qmk/qmk_firmware/tree/master/keyboards/ibm/model_m/teensypp",
     "maintainer": "iw0rm3r",
     "usb": {
         "vid": "0xFEED",