pre-commit: Replace flake8, isort, and pyupgrade with ruff #584

cclauss · 2023-02-28T10:09:23Z

Ruff supports over ~~400~~ 500 lint rules including flake8, isort, pylint, and pyupgrade and is written in Rust for speed.
Also added rules for pylint conventions and pylint errors.

.pre-commit-config.yaml

Pierre-Sassoulas · 2023-02-28T10:19:05Z

Who can take the decision to drop python 3.6 ? It's been EOL for a long time at this point.

RonnyPfannschmidt · 2023-02-28T10:32:20Z

Yes we can

cclauss · 2023-02-28T10:49:02Z

#567 drops py36

.github/workflows/test.yml

ionelmc · 2023-02-28T12:24:42Z

Ruff looks nice if it can replace the all the tools with a single config. Are there any downsides with ruff or anything that would need attention?

cclauss · 2023-02-28T12:31:07Z

I have not seen downsides (except maybe it is not yet v1.0) and I have been using it broadly:
https://beta.ruff.rs/docs/#testimonials

Pierre-Sassoulas

Apart from the fact that without fix it's not equivalent to having pyupgrade LGTM.

ionelmc · 2023-03-10T11:16:04Z

I've played a bit with ruff now, its isort support is incomplete (no support for default-section or src-paths at least). The old isort hook needs to be kept.

cclauss · 2023-03-10T11:26:18Z

This cannot be achieved by using forced separate, known parties, known local folder and src?

https://beta.ruff.rs/docs/settings/#isort

If not then I can drop the I rules from this pull request and bring back isort.

Timothy Crosley, creator of isort:

Just switched my first project to Ruff. Only one downside so far: it's so fast I couldn't believe it was working till I intentionally introduced some errors.

https://beta.ruff.rs/docs/#testimonials

ionelmc · 2023-03-10T14:29:44Z

.ruff.toml

+    "dist",
+]
+line-length = 140
+select = [


Shouldn't this be extend-select instead?

If you're wondering how to configure Ruff, here are some recommended guidelines:

Prefer select and ignore over extend-select and extend-ignore, to make your rule set explicit.

https://beta.ruff.rs/docs/configuration

Well all I want is to not hardcode a ruleset (which select = [stuff] exactly is). I don't think any of those recommendations are worth considering blindly given the tool's age and popularity.

How about select = ["ALL"] and ignore whatever doesn't make sense for pytest-cov?

If you're wondering how to configure Ruff, here are some recommended guidelines:

Prefer select and ignore over extend-select and extend-ignore, to make your rule set explicit.

Use ALL with discretion. Enabling ALL will implicitly enable new rules whenever you upgrade.

Start with a small set of rules (select = ["E", "F"]) and add a category at-a-time. For example, you might consider expanding to select = ["E", "F", "B"] to enable the popular flake8-bugbear extension.

By default, Ruff's autofix is aggressive. If you find that it's too aggressive for your liking, consider turning off autofix for specific rules or categories (see FAQ).

There are way too many categories to enable manually. I'd expect that there are more good checks than broken or bad ones.

I noticed it's aggressive ... or rather destructive. That's why I think --show-fixes is a must. I think avoiding --fix actually adds more friction (too much back and forth for avoidable manual stuff).

Ok so I've played with it a bit more.... now I am not really sure what the best way... eg: these are either invalid checks or would be a pain to sort out, or not even worth fixing:

ignore = [ "D", # pydocstyle "ANN", # flake8-annotations "ARG", # flake8-unused-arguments "BLE", # flake8-blind-except "C90", # mccabe "EM", # flake8-errmsg "FBT", # flake8-boolean-trap "INP", # flake8-no-pep420 "PLR", # Pylint Refactor "PLW", # Pylint Warning "Q", # flake8-quotes "RET", # flake8-return "SIM102", # flake8-simplify collapsible-if "SIM105", # flake8-simplify use-contextlib-suppress "SLF", # flake8-self "T20", # flake8-print "S101", # flake8-bandit assert "S102", # flake8-bandit exec "S110", # flake8-bandit try-except-pass "TRY", # tryceratops ]

Now considering that rsync features are being dropped in xdist ... a lot of bulk using that in pytest-cov becomes unnecessary, if it isn't already as some people are suggesting pytest-cov is not necessary for getting xdist support...

I guess select with a few is fine for now.

So... How should we proceed? Given your explorations and your knowledge of the codebase, do you want to open a new PR that cherry-picks from this one? I have no trouble closing this with unmerged commits. Or should I press on?

I'd also recommend the C4 checks as they are popular, increase performance, and have autofixes enabled for all rules.

Is there somewhere proof that C4 mods increase performance?

.ruff.toml

cclauss · 2023-03-20T17:55:25Z

As the Ruff docs say, select=ALL is a bad idea. Closing.

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 4.1.0 to 5.0.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=4.1.0&new-version=5.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 4.1.0 to 5.0.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=4.1.0&new-version=5.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 4.1.0 to 5.0.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=4.1.0&new-version=5.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

[![Mend Renovate](https://app.renovatebot.com/images/banner.svg)](https://renovatebot.com) This PR contains the following updates: | Package | Change | Age | Adoption | Passing | Confidence | |---|---|---|---|---|---| | [pytest-cov](https://togithub.com/pytest-dev/pytest-cov) ([changelog](https://pytest-cov.readthedocs.io/en/latest/changelog.html)) | `==4.1.0` -> `==5.0.0` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | --- ### Release Notes <details> <summary>pytest-dev/pytest-cov (pytest-cov)</summary> ### [`v5.0.0`](https://togithub.com/pytest-dev/pytest-cov/blob/HEAD/CHANGELOG.rst#500-2024-03-24) [Compare Source](https://togithub.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0) - Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in `#623 <https://github.com/pytest-dev/pytest-cov/pull/623>`\_. - Switched docs theme to Furo. - Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in `#630 <https://github.com/pytest-dev/pytest-cov/pull/630>`*, `#631 <https://github.com/pytest-dev/pytest-cov/pull/631>`*, `#632 <https://github.com/pytest-dev/pytest-cov/pull/632>`\_ and `#633 <https://github.com/pytest-dev/pytest-cov/pull/633>`\_. - Added a `pyproject.toml` example in the docs. Contributed by Dawn James in `#626 <https://github.com/pytest-dev/pytest-cov/pull/626>`\_. - Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in `#584 <https://github.com/pytest-dev/pytest-cov/pull/584>`\_. </details> --- ### Configuration 📅 **Schedule**: Branch creation - "every weekend" in timezone Etc/UTC, Automerge - At any time (no schedule defined). 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox. 🔕 **Ignore**: Close this PR and you won't be reminded about this update again. --- - [ ] If you want to rebase/retry this PR, check this box --- This PR has been generated by [Mend Renovate](https://www.mend.io/free-developer-tools/renovate/). View repository job log [here](https://developer.mend.io/github/canonical/charmcraft).  Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p> <ul> <li> <p><code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_.</p> </li> <li> <p>Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow.</p> <p>There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>::</p> <p>[run] concurrency = multiprocessing</p> </li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> --------- Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Francesca L. Bleken <[email protected]> Co-authored-by: francescalb <[email protected]>

[![Mend Renovate](https://app.renovatebot.com/images/banner.svg)](https://renovatebot.com) This PR contains the following updates: | Package | Change | Age | Adoption | Passing | Confidence | |---|---|---|---|---|---| | [pytest-cov](https://togithub.com/pytest-dev/pytest-cov) ([changelog](https://pytest-cov.readthedocs.io/en/latest/changelog.html)) | `==4.1.0` -> `==5.0.0` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | --- ### Release Notes <details> <summary>pytest-dev/pytest-cov (pytest-cov)</summary> ### [`v5.0.0`](https://togithub.com/pytest-dev/pytest-cov/blob/HEAD/CHANGELOG.rst#500-2024-03-24) [Compare Source](https://togithub.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0) - Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in `#623 <https://github.com/pytest-dev/pytest-cov/pull/623>`\_. - Switched docs theme to Furo. - Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in `#630 <https://github.com/pytest-dev/pytest-cov/pull/630>`*, `#631 <https://github.com/pytest-dev/pytest-cov/pull/631>`*, `#632 <https://github.com/pytest-dev/pytest-cov/pull/632>`\_ and `#633 <https://github.com/pytest-dev/pytest-cov/pull/633>`\_. - Added a `pyproject.toml` example in the docs. Contributed by Dawn James in `#626 <https://github.com/pytest-dev/pytest-cov/pull/626>`\_. - Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in `#584 <https://github.com/pytest-dev/pytest-cov/pull/584>`\_. </details> --- ### Configuration 📅 **Schedule**: Branch creation - "every weekend" in timezone Etc/UTC, Automerge - "every weekend" in timezone Etc/UTC. 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox. 🔕 **Ignore**: Close this PR and you won't be reminded about this update again. --- - [ ] If you want to rebase/retry this PR, check this box --- This PR has been generated by [Mend Renovate](https://www.mend.io/free-developer-tools/renovate/). View repository job log [here](https://developer.mend.io/github/canonical/snapcraft).  Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

[![Mend Renovate](https://app.renovatebot.com/images/banner.svg)](https://renovatebot.com) This PR contains the following updates: | Package | Change | Age | Adoption | Passing | Confidence | |---|---|---|---|---|---| | [pytest-cov](https://togithub.com/pytest-dev/pytest-cov) ([changelog](https://pytest-cov.readthedocs.io/en/latest/changelog.html)) | `^4.0.0` -> `^5.0.0` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | --- ### Release Notes <details> <summary>pytest-dev/pytest-cov (pytest-cov)</summary> ### [`v5.0.0`](https://togithub.com/pytest-dev/pytest-cov/blob/HEAD/CHANGELOG.rst#500-2024-03-24) [Compare Source](https://togithub.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0) - Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in `#623 <https://github.com/pytest-dev/pytest-cov/pull/623>`\_. - Switched docs theme to Furo. - Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in `#630 <https://github.com/pytest-dev/pytest-cov/pull/630>`*, `#631 <https://github.com/pytest-dev/pytest-cov/pull/631>`*, `#632 <https://github.com/pytest-dev/pytest-cov/pull/632>`\_ and `#633 <https://github.com/pytest-dev/pytest-cov/pull/633>`\_. - Added a `pyproject.toml` example in the docs. Contributed by Dawn James in `#626 <https://github.com/pytest-dev/pytest-cov/pull/626>`\_. - Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in `#584 <https://github.com/pytest-dev/pytest-cov/pull/584>`\_. </details> --- ### Configuration 📅 **Schedule**: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined). 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox. 🔕 **Ignore**: Close this PR and you won't be reminded about this update again. --- - [ ] If you want to rebase/retry this PR, check this box --- This PR has been generated by [Mend Renovate](https://www.mend.io/free-developer-tools/renovate/). View repository job log [here](https://developer.mend.io/github/jooola/earhorn).  Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 4.1.0 to 5.0.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=4.1.0&new-version=5.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

This PR contains the following updates: | Package | Change | Age | Adoption | Passing | Confidence | |---|---|---|---|---|---| | [pytest-cov](https://github.com/pytest-dev/pytest-cov) ([changelog](https://pytest-cov.readthedocs.io/en/latest/changelog.html)) | `==4.1.0` -> `==5.0.0` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | --- ### Release Notes <details> <summary>pytest-dev/pytest-cov (pytest-cov)</summary> ### [`v5.0.0`](https://github.com/pytest-dev/pytest-cov/blob/HEAD/CHANGELOG.rst#500-2024-03-24) [Compare Source](pytest-dev/pytest-cov@v4.1.0...v5.0.0) - Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in `#623 <https://github.com/pytest-dev/pytest-cov/pull/623>`\_. - Switched docs theme to Furo. - Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in `#630 <https://github.com/pytest-dev/pytest-cov/pull/630>`*, `#631 <https://github.com/pytest-dev/pytest-cov/pull/631>`*, `#632 <https://github.com/pytest-dev/pytest-cov/pull/632>`\_ and `#633 <https://github.com/pytest-dev/pytest-cov/pull/633>`\_. - Added a `pyproject.toml` example in the docs. Contributed by Dawn James in `#626 <https://github.com/pytest-dev/pytest-cov/pull/626>`\_. - Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in `#584 <https://github.com/pytest-dev/pytest-cov/pull/584>`\_. </details> --- ### Configuration 📅 **Schedule**: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined). 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever PR becomes conflicted, or rename PR to start with "rebase!". 🔕 **Ignore**: Close this PR and you won't be reminded about this update again. --- This PR has been generated by [Renovate Bot](https://github.com/renovatebot/renovate).

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 4.1.0 to 5.0.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=4.1.0&new-version=5.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

levrik · 2024-04-26T12:21:58Z

@ionelmc Ruff supports default-section nowadays btw after I opened an issue on their repo. It also includes a formatter now which can be used instead of Black. The nice thing here is that you do not have to ensure Black and linting rules are compatible as Ruff already takes care of this.

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 4.1.0 to 5.0.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=4.1.0&new-version=5.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

[![Mend Renovate](https://app.renovatebot.com/images/banner.svg)](https://renovatebot.com) This PR contains the following updates: | Package | Change | Age | Adoption | Passing | Confidence | |---|---|---|---|---|---| | [pytest](https://togithub.com/pytest-dev/pytest) ([changelog](https://docs.pytest.org/en/stable/changelog.html)) | `7.4.4` -> `8.2.0` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/pytest/8.2.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/pytest/8.2.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/pytest/7.4.4/8.2.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/pytest/7.4.4/8.2.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | | [pytest-cov](https://togithub.com/pytest-dev/pytest-cov) ([changelog](https://pytest-cov.readthedocs.io/en/latest/changelog.html)) | `4.1.0` -> `5.0.0` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | --- ### Release Notes <details> <summary>pytest-dev/pytest (pytest)</summary> ### [`v8.2.0`](https://togithub.com/pytest-dev/pytest/releases/tag/8.2.0) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.1.2...8.2.0) # pytest 8.2.0 (2024-04-27) ## Deprecations - [#12069](https://togithub.com/pytest-dev/pytest/issues/12069): A deprecation warning is now raised when implementations of one of the following hooks request a deprecated `py.path.local` parameter instead of the `pathlib.Path` parameter which replaced it: - `pytest_ignore_collect`{.interpreted-text role="hook"} - the `path` parameter - use `collection_path` instead. - `pytest_collect_file`{.interpreted-text role="hook"} - the `path` parameter - use `file_path` instead. - `pytest_pycollect_makemodule`{.interpreted-text role="hook"} - the `path` parameter - use `module_path` instead. - `pytest_report_header`{.interpreted-text role="hook"} - the `startdir` parameter - use `start_path` instead. - `pytest_report_collectionfinish`{.interpreted-text role="hook"} - the `startdir` parameter - use `start_path` instead. The replacement parameters are available since pytest 7.0.0. The old parameters will be removed in pytest 9.0.0. See `legacy-path-hooks-deprecated`{.interpreted-text role="ref"} for more details. ## Features - [#11871](https://togithub.com/pytest-dev/pytest/issues/11871): Added support for reading command line arguments from a file using the prefix character `@`, like e.g.: `pytest @tests.txt`. The file must have one argument per line. See `Read arguments from file <args-from-file>`{.interpreted-text role="ref"} for details. ## Improvements - [#11523](https://togithub.com/pytest-dev/pytest/issues/11523): `pytest.importorskip`{.interpreted-text role="func"} will now issue a warning if the module could be found, but raised `ImportError`{.interpreted-text role="class"} instead of `ModuleNotFoundError`{.interpreted-text role="class"}. The warning can be suppressed by passing `exc_type=ImportError` to `pytest.importorskip`{.interpreted-text role="func"}. See `import-or-skip-import-error`{.interpreted-text role="ref"} for details. - [#11728](https://togithub.com/pytest-dev/pytest/issues/11728): For `unittest`-based tests, exceptions during class cleanup (as raised by functions registered with `TestCase.addClassCleanup <unittest.TestCase.addClassCleanup>`{.interpreted-text role="meth"}) are now reported instead of silently failing. - [#11777](https://togithub.com/pytest-dev/pytest/issues/11777): Text is no longer truncated in the `short test summary info` section when `-vv` is given. - [#12112](https://togithub.com/pytest-dev/pytest/issues/12112): Improved namespace packages detection when `consider_namespace_packages`{.interpreted-text role="confval"} is enabled, covering more situations (like editable installs). - [#9502](https://togithub.com/pytest-dev/pytest/issues/9502): Added `PYTEST_VERSION`{.interpreted-text role="envvar"} environment variable which is defined at the start of the pytest session and undefined afterwards. It contains the value of `pytest.__version__`, and among other things can be used to easily check if code is running from within a pytest run. ## Bug Fixes - [#12065](https://togithub.com/pytest-dev/pytest/issues/12065): Fixed a regression in pytest 8.0.0 where test classes containing `setup_method` and tests using `@staticmethod` or `@classmethod` would crash with `AttributeError: 'NoneType' object has no attribute 'setup_method'`. Now the `request.instance <pytest.FixtureRequest.instance>`{.interpreted-text role="attr"} attribute of tests using `@staticmethod` and `@classmethod` is no longer `None`, but a fresh instance of the class, like in non-static methods. Previously it was `None`, and all fixtures of such tests would share a single `self`. - [#12135](https://togithub.com/pytest-dev/pytest/issues/12135): Fixed issue where fixtures adding their finalizer multiple times to fixtures they request would cause unreliable and non-intuitive teardown ordering in some instances. - [#12194](https://togithub.com/pytest-dev/pytest/issues/12194): Fixed a bug with `--importmode=importlib` and `--doctest-modules` where child modules did not appear as attributes in parent modules. - [#1489](https://togithub.com/pytest-dev/pytest/issues/1489): Fixed some instances where teardown of higher-scoped fixtures was not happening in the reverse order they were initialized in. ## Trivial/Internal Changes - [#12069](https://togithub.com/pytest-dev/pytest/issues/12069): `pluggy>=1.5.0` is now required. - [#12167](https://togithub.com/pytest-dev/pytest/issues/12167): `cache <cache>`{.interpreted-text role="ref"}: create supporting files (`CACHEDIR.TAG`, `.gitignore`, etc.) in a temporary directory to provide atomic semantics. ### [`v8.1.2`](https://togithub.com/pytest-dev/pytest/releases/tag/8.1.2) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.1.1...8.1.2) # pytest 8.1.2 (2024-04-26) ## Bug Fixes - [#12114](https://togithub.com/pytest-dev/pytest/issues/12114): Fixed error in `pytest.approx`{.interpreted-text role="func"} when used with \[numpy]{.title-ref} arrays and comparing with other types. ### [`v8.1.1`](https://togithub.com/pytest-dev/pytest/releases/tag/8.1.1) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.1.0...8.1.1) # pytest 8.1.1 (2024-03-08) ::: {.note} ::: {.title} Note ::: This release is not a usual bug fix release -- it contains features and improvements, being a follow up to `8.1.0`, which has been yanked from PyPI. ::: ## Features - [#11475](https://togithub.com/pytest-dev/pytest/issues/11475): Added the new `consider_namespace_packages`{.interpreted-text role="confval"} configuration option, defaulting to `False`. If set to `True`, pytest will attempt to identify modules that are part of [namespace packages](https://packaging.python.org/en/latest/guides/packaging-namespace-packages) when importing modules. - [#11653](https://togithub.com/pytest-dev/pytest/issues/11653): Added the new `verbosity_test_cases`{.interpreted-text role="confval"} configuration option for fine-grained control of test execution verbosity. See `Fine-grained verbosity <pytest.fine_grained_verbosity>`{.interpreted-text role="ref"} for more details. ## Improvements - [#10865](https://togithub.com/pytest-dev/pytest/issues/10865): `pytest.warns`{.interpreted-text role="func"} now validates that `warnings.warn`{.interpreted-text role="func"} was called with a \[str]{.title-ref} or a \[Warning]{.title-ref}. Currently in Python it is possible to use other types, however this causes an exception when `warnings.filterwarnings`{.interpreted-text role="func"} is used to filter those warnings (see [CPython #103577](https://togithub.com/python/cpython/issues/103577) for a discussion). While this can be considered a bug in CPython, we decided to put guards in pytest as the error message produced without this check in place is confusing. - [#11311](https://togithub.com/pytest-dev/pytest/issues/11311): When using `--override-ini` for paths in invocations without a configuration file defined, the current working directory is used as the relative directory. Previoulsy this would raise an `AssertionError`{.interpreted-text role="class"}. - [#11475](https://togithub.com/pytest-dev/pytest/issues/11475): `--import-mode=importlib <import-mode-importlib>`{.interpreted-text role="ref"} now tries to import modules using the standard import mechanism (but still without changing :py`sys.path`{.interpreted-text role="data"}), falling back to importing modules directly only if that fails. This means that installed packages will be imported under their canonical name if possible first, for example `app.core.models`, instead of having the module name always be derived from their path (for example `.env310.lib.site_packages.app.core.models`). - [#11801](https://togithub.com/pytest-dev/pytest/issues/11801): Added the `iter_parents() <_pytest.nodes.Node.iter_parents>`{.interpreted-text role="func"} helper method on nodes. It is similar to `listchain <_pytest.nodes.Node.listchain>`{.interpreted-text role="func"}, but goes from bottom to top, and returns an iterator, not a list. - [#11850](https://togithub.com/pytest-dev/pytest/issues/11850): Added support for `sys.last_exc`{.interpreted-text role="data"} for post-mortem debugging on Python>=3.12. - [#11962](https://togithub.com/pytest-dev/pytest/issues/11962): In case no other suitable candidates for configuration file are found, a `pyproject.toml` (even without a `[tool.pytest.ini_options]` table) will be considered as the configuration file and define the `rootdir`. - [#11978](https://togithub.com/pytest-dev/pytest/issues/11978): Add `--log-file-mode` option to the logging plugin, enabling appending to log-files. This option accepts either `"w"` or `"a"` and defaults to `"w"`. Previously, the mode was hard-coded to be `"w"` which truncates the file before logging. - [#12047](https://togithub.com/pytest-dev/pytest/issues/12047): When multiple finalizers of a fixture raise an exception, now all exceptions are reported as an exception group. Previously, only the first exception was reported. ## Bug Fixes - [#11475](https://togithub.com/pytest-dev/pytest/issues/11475): Fixed regression where `--importmode=importlib` would import non-test modules more than once. - [#11904](https://togithub.com/pytest-dev/pytest/issues/11904): Fixed a regression in pytest 8.0.0 that would cause test collection to fail due to permission errors when using `--pyargs`. This change improves the collection tree for tests specified using `--pyargs`, see `12043`{.interpreted-text role="pull"} for a comparison with pytest 8.0 and <8. - [#12011](https://togithub.com/pytest-dev/pytest/issues/12011): Fixed a regression in 8.0.1 whereby `setup_module` xunit-style fixtures are not executed when `--doctest-modules` is passed. - [#12014](https://togithub.com/pytest-dev/pytest/issues/12014): Fix the `stacklevel` used when warning about marks used on fixtures. - [#12039](https://togithub.com/pytest-dev/pytest/issues/12039): Fixed a regression in `8.0.2` where tests created using `tmp_path`{.interpreted-text role="fixture"} have been collected multiple times in CI under Windows. ## Improved Documentation - [#11790](https://togithub.com/pytest-dev/pytest/issues/11790): Documented the retention of temporary directories created using the `tmp_path` fixture in more detail. ## Trivial/Internal Changes - [#11785](https://togithub.com/pytest-dev/pytest/issues/11785): Some changes were made to private functions which may affect plugins which access them: - `FixtureManager._getautousenames()` now takes a `Node` itself instead of the nodeid. - `FixtureManager.getfixturedefs()` now takes the `Node` itself instead of the nodeid. - The `_pytest.nodes.iterparentnodeids()` function is removed without replacement. Prefer to traverse the node hierarchy itself instead. If you really need to, copy the function from the previous pytest release. - [#12069](https://togithub.com/pytest-dev/pytest/issues/12069): Delayed the deprecation of the following features to `9.0.0`: - `node-ctor-fspath-deprecation`{.interpreted-text role="ref"}. - `legacy-path-hooks-deprecated`{.interpreted-text role="ref"}. It was discovered after `8.1.0` was released that the warnings about the impeding removal were not being displayed, so the team decided to revert the removal. This is the reason for `8.1.0` being yanked. # pytest 8.1.0 (YANKED) ::: {.note} ::: {.title} Note ::: This release has been **yanked**: it broke some plugins without the proper warning period, due to some warnings not showing up as expected. See [#12069](https://togithub.com/pytest-dev/pytest/issues/12069). ::: ### [`v8.1.0`](https://togithub.com/pytest-dev/pytest/releases/tag/8.1.0) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.0.2...8.1.0) # pytest 8.1.0 (YANKED) > \[!IMPORTANT]\ > This release has been **yanked**: it broke some plugins without the proper warning period, due to some warnings not showing up as expected. See [#12069](https://togithub.com/pytest-dev/pytest/issues/12069). ## Features - [#11475](https://togithub.com/pytest-dev/pytest/issues/11475): Added the new `consider_namespace_packages`{.interpreted-text role="confval"} configuration option, defaulting to `False`. If set to `True`, pytest will attempt to identify modules that are part of [namespace packages](https://packaging.python.org/en/latest/guides/packaging-namespace-packages) when importing modules. - [#11653](https://togithub.com/pytest-dev/pytest/issues/11653): Added the new `verbosity_test_cases`{.interpreted-text role="confval"} configuration option for fine-grained control of test execution verbosity. See `Fine-grained verbosity <pytest.fine_grained_verbosity>`{.interpreted-text role="ref"} for more details. ## Improvements - [#10865](https://togithub.com/pytest-dev/pytest/issues/10865): `pytest.warns`{.interpreted-text role="func"} now validates that `warnings.warn`{.interpreted-text role="func"} was called with a \[str]{.title-ref} or a \[Warning]{.title-ref}. Currently in Python it is possible to use other types, however this causes an exception when `warnings.filterwarnings`{.interpreted-text role="func"} is used to filter those warnings (see [CPython #103577](https://togithub.com/python/cpython/issues/103577) for a discussion). While this can be considered a bug in CPython, we decided to put guards in pytest as the error message produced without this check in place is confusing. - [#11311](https://togithub.com/pytest-dev/pytest/issues/11311): When using `--override-ini` for paths in invocations without a configuration file defined, the current working directory is used as the relative directory. Previoulsy this would raise an `AssertionError`{.interpreted-text role="class"}. - [#11475](https://togithub.com/pytest-dev/pytest/issues/11475): `--import-mode=importlib <import-mode-importlib>`{.interpreted-text role="ref"} now tries to import modules using the standard import mechanism (but still without changing :py`sys.path`{.interpreted-text role="data"}), falling back to importing modules directly only if that fails. This means that installed packages will be imported under their canonical name if possible first, for example `app.core.models`, instead of having the module name always be derived from their path (for example `.env310.lib.site_packages.app.core.models`). - [#11801](https://togithub.com/pytest-dev/pytest/issues/11801): Added the `iter_parents() <_pytest.nodes.Node.iter_parents>`{.interpreted-text role="func"} helper method on nodes. It is similar to `listchain <_pytest.nodes.Node.listchain>`{.interpreted-text role="func"}, but goes from bottom to top, and returns an iterator, not a list. - [#11850](https://togithub.com/pytest-dev/pytest/issues/11850): Added support for `sys.last_exc`{.interpreted-text role="data"} for post-mortem debugging on Python>=3.12. - [#11962](https://togithub.com/pytest-dev/pytest/issues/11962): In case no other suitable candidates for configuration file are found, a `pyproject.toml` (even without a `[tool.pytest.ini_options]` table) will be considered as the configuration file and define the `rootdir`. - [#11978](https://togithub.com/pytest-dev/pytest/issues/11978): Add `--log-file-mode` option to the logging plugin, enabling appending to log-files. This option accepts either `"w"` or `"a"` and defaults to `"w"`. Previously, the mode was hard-coded to be `"w"` which truncates the file before logging. - [#12047](https://togithub.com/pytest-dev/pytest/issues/12047): When multiple finalizers of a fixture raise an exception, now all exceptions are reported as an exception group. Previously, only the first exception was reported. ## Bug Fixes - [#11904](https://togithub.com/pytest-dev/pytest/issues/11904): Fixed a regression in pytest 8.0.0 that would cause test collection to fail due to permission errors when using `--pyargs`. This change improves the collection tree for tests specified using `--pyargs`, see `12043`{.interpreted-text role="pull"} for a comparison with pytest 8.0 and <8. - [#12011](https://togithub.com/pytest-dev/pytest/issues/12011): Fixed a regression in 8.0.1 whereby `setup_module` xunit-style fixtures are not executed when `--doctest-modules` is passed. - [#12014](https://togithub.com/pytest-dev/pytest/issues/12014): Fix the `stacklevel` used when warning about marks used on fixtures. - [#12039](https://togithub.com/pytest-dev/pytest/issues/12039): Fixed a regression in `8.0.2` where tests created using `tmp_path`{.interpreted-text role="fixture"} have been collected multiple times in CI under Windows. ## Improved Documentation - [#11790](https://togithub.com/pytest-dev/pytest/issues/11790): Documented the retention of temporary directories created using the `tmp_path` fixture in more detail. ## Trivial/Internal Changes - [#11785](https://togithub.com/pytest-dev/pytest/issues/11785): Some changes were made to private functions which may affect plugins which access them: - `FixtureManager._getautousenames()` now takes a `Node` itself instead of the nodeid. - `FixtureManager.getfixturedefs()` now takes the `Node` itself instead of the nodeid. - The `_pytest.nodes.iterparentnodeids()` function is removed without replacement. Prefer to traverse the node hierarchy itself instead. If you really need to, copy the function from the previous pytest release. ### [`v8.0.2`](https://togithub.com/pytest-dev/pytest/releases/tag/8.0.2) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.0.1...8.0.2) # pytest 8.0.2 (2024-02-24) ## Bug Fixes - [#11895](https://togithub.com/pytest-dev/pytest/issues/11895): Fix collection on Windows where initial paths contain the short version of a path (for example `c:\PROGRA~1\tests`). - [#11953](https://togithub.com/pytest-dev/pytest/issues/11953): Fix an `IndexError` crash raising from `getstatementrange_ast`. - [#12021](https://togithub.com/pytest-dev/pytest/issues/12021): Reverted a fix to \[--maxfail]{.title-ref} handling in pytest 8.0.0 because it caused a regression in pytest-xdist whereby session fixture teardowns may get executed multiple times when the max-fails is reached. ### [`v8.0.1`](https://togithub.com/pytest-dev/pytest/releases/tag/8.0.1) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.0.0...8.0.1) # pytest 8.0.1 (2024-02-16) ## Bug Fixes - [#11875](https://togithub.com/pytest-dev/pytest/issues/11875): Correctly handle errors from `getpass.getuser`{.interpreted-text role="func"} in Python 3.13. - [#11879](https://togithub.com/pytest-dev/pytest/issues/11879): Fix an edge case where `ExceptionInfo._stringify_exception` could crash `pytest.raises`{.interpreted-text role="func"}. - [#11906](https://togithub.com/pytest-dev/pytest/issues/11906): Fix regression with `pytest.warns`{.interpreted-text role="func"} using custom warning subclasses which have more than one parameter in their \[\__init\_\_]{.title-ref}. - [#11907](https://togithub.com/pytest-dev/pytest/issues/11907): Fix a regression in pytest 8.0.0 whereby calling `pytest.skip`{.interpreted-text role="func"} and similar control-flow exceptions within a `pytest.warns()`{.interpreted-text role="func"} block would get suppressed instead of propagating. - [#11929](https://togithub.com/pytest-dev/pytest/issues/11929): Fix a regression in pytest 8.0.0 whereby autouse fixtures defined in a module get ignored by the doctests in the module. - [#11937](https://togithub.com/pytest-dev/pytest/issues/11937): Fix a regression in pytest 8.0.0 whereby items would be collected in reverse order in some circumstances. ### [`v8.0.0`](https://togithub.com/pytest-dev/pytest/releases/tag/8.0.0): pytest 8.0.0 (2024-01-27) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/7.4.4...8.0.0) See [8.0.0rc1](https://togithub.com/pytest-dev/pytest/releases/tag/8.0.0rc1) and [8.0.0rc2](https://togithub.com/pytest-dev/pytest/releases/tag/8.0.0rc2) for the full changes since pytest 7.4! #### Bug Fixes - [#11842](https://togithub.com/pytest-dev/pytest/issues/11842): Properly escape the `reason` of a `skip <pytest.mark.skip ref>`{.interpreted-text role="ref"} mark when writing JUnit XML files. - [#11861](https://togithub.com/pytest-dev/pytest/issues/11861): Avoid microsecond exceeds `1_000_000` when using `log-date-format` with `%f` specifier, which might cause the test suite to crash. </details> <details> <summary>pytest-dev/pytest-cov (pytest-cov)</summary> ### [`v5.0.0`](https://togithub.com/pytest-dev/pytest-cov/blob/HEAD/CHANGELOG.rst#500-2024-03-24) [Compare Source](https://togithub.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0) - Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in `#623 <https://github.com/pytest-dev/pytest-cov/pull/623>`\_. - Switched docs theme to Furo. - Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in `#630 <https://github.com/pytest-dev/pytest-cov/pull/630>`*, `#631 <https://github.com/pytest-dev/pytest-cov/pull/631>`*, `#632 <https://github.com/pytest-dev/pytest-cov/pull/632>`\_ and `#633 <https://github.com/pytest-dev/pytest-cov/pull/633>`\_. - Added a `pyproject.toml` example in the docs. Contributed by Dawn James in `#626 <https://github.com/pytest-dev/pytest-cov/pull/626>`\_. - Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in `#584 <https://github.com/pytest-dev/pytest-cov/pull/584>`\_. </details> --- ### Configuration 📅 **Schedule**: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined). 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox. 🔕 **Ignore**: Close this PR and you won't be reminded about these updates again. --- - [ ] If you want to rebase/retry this PR, check this box --- This PR has been generated by [Mend Renovate](https://www.mend.io/free-developer-tools/renovate/). View repository job log [here](https://developer.mend.io/github/rpdelaney/downforeveryone).

This PR contains the following updates: | Package | Type | Update | Change | |---|---|---|---| | [dev/pytest-cov](https://togithub.com/pytest-dev/pytest-cov) ([changelog](https://pytest-cov.readthedocs.io/en/latest/changelog.html)) | project.optional-dependencies | major | `==4.1.0` -> `==5.0.0` | --- ### Release Notes <details> <summary>pytest-dev/pytest-cov (dev/pytest-cov)</summary> ### [`v5.0.0`](https://togithub.com/pytest-dev/pytest-cov/blob/HEAD/CHANGELOG.rst#500-2024-03-24) [Compare Source](https://togithub.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0) - Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in `#623 <https://github.com/pytest-dev/pytest-cov/pull/623>`\_. - Switched docs theme to Furo. - Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in `#630 <https://github.com/pytest-dev/pytest-cov/pull/630>`*, `#631 <https://github.com/pytest-dev/pytest-cov/pull/631>`*, `#632 <https://github.com/pytest-dev/pytest-cov/pull/632>`\_ and `#633 <https://github.com/pytest-dev/pytest-cov/pull/633>`\_. - Added a `pyproject.toml` example in the docs. Contributed by Dawn James in `#626 <https://github.com/pytest-dev/pytest-cov/pull/626>`\_. - Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in `#584 <https://github.com/pytest-dev/pytest-cov/pull/584>`\_. </details> --- ### Configuration 📅 **Schedule**: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined). 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox. 🔕 **Ignore**: Close this PR and you won't be reminded about this update again. --- - [ ] If you want to rebase/retry this PR, check this box --- This PR has been generated by [Renovate Bot](https://togithub.com/renovatebot/renovate).

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 4.1.0 to 5.0.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=4.1.0&new-version=5.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

[![Mend Renovate](https://app.renovatebot.com/images/banner.svg)](https://renovatebot.com) This PR contains the following updates: | Package | Change | Age | Adoption | Passing | Confidence | |---|---|---|---|---|---| | [pytest-cov](https://togithub.com/pytest-dev/pytest-cov) ([changelog](https://pytest-cov.readthedocs.io/en/latest/changelog.html)) | `~4.1.0` -> `~5.0.0` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | --- ### Release Notes <details> <summary>pytest-dev/pytest-cov (pytest-cov)</summary> ### [`v5.0.0`](https://togithub.com/pytest-dev/pytest-cov/blob/HEAD/CHANGELOG.rst#500-2024-03-24) [Compare Source](https://togithub.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0) - Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in `#623 <https://github.com/pytest-dev/pytest-cov/pull/623>`\_. - Switched docs theme to Furo. - Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in `#630 <https://github.com/pytest-dev/pytest-cov/pull/630>`*, `#631 <https://github.com/pytest-dev/pytest-cov/pull/631>`*, `#632 <https://github.com/pytest-dev/pytest-cov/pull/632>`\_ and `#633 <https://github.com/pytest-dev/pytest-cov/pull/633>`\_. - Added a `pyproject.toml` example in the docs. Contributed by Dawn James in `#626 <https://github.com/pytest-dev/pytest-cov/pull/626>`\_. - Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in `#584 <https://github.com/pytest-dev/pytest-cov/pull/584>`\_. </details> --- ### Configuration 📅 **Schedule**: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined). 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox. 🔕 **Ignore**: Close this PR and you won't be reminded about this update again. --- - [ ] If you want to rebase/retry this PR, check this box --- This PR has been generated by [Mend Renovate](https://www.mend.io/free-developer-tools/renovate/). View repository job log [here](https://developer.mend.io/github/naa0yama/pythonboilerplate).  Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 4.1.0 to 5.0.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=4.1.0&new-version=5.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

[![Mend Renovate](https://app.renovatebot.com/images/banner.svg)](https://renovatebot.com) This PR contains the following updates: | Package | Change | Age | Adoption | Passing | Confidence | |---|---|---|---|---|---| | [black](https://togithub.com/psf/black) ([changelog](https://togithub.com/psf/black/blob/main/CHANGES.md)) | `^23.12.1` -> `^24.4.2` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/black/24.4.2?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/black/24.4.2?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/black/23.12.1/24.4.2?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/black/23.12.1/24.4.2?slim=true)](https://docs.renovatebot.com/merge-confidence/) | | [flake8](https://togithub.com/pycqa/flake8) ([changelog](https://flake8.pycqa.org/en/latest/release-notes/index.html)) | `^6.1.0` -> `^7.1.0` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/flake8/7.1.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/flake8/7.1.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/flake8/6.1.0/7.1.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/flake8/6.1.0/7.1.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | | [ops-scenario](https://togithub.com/canonical/ops-scenario) | `^5.8.1` -> `^6.1.1` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/ops-scenario/6.1.1?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/ops-scenario/6.1.1?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/ops-scenario/5.8.1/6.1.1?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/ops-scenario/5.8.1/6.1.1?slim=true)](https://docs.renovatebot.com/merge-confidence/) | | [pyproject-flake8](https://togithub.com/csachs/pyproject-flake8) | `^6.1.0` -> `^7.0.0` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/pyproject-flake8/7.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/pyproject-flake8/7.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/pyproject-flake8/6.1.0/7.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/pyproject-flake8/6.1.0/7.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | | [pytest](https://togithub.com/pytest-dev/pytest) ([changelog](https://docs.pytest.org/en/stable/changelog.html)) | `^7.4.4` -> `^8.2.2` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/pytest/8.2.2?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/pytest/8.2.2?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/pytest/7.4.4/8.2.2?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/pytest/7.4.4/8.2.2?slim=true)](https://docs.renovatebot.com/merge-confidence/) | | [pytest-cov](https://togithub.com/pytest-dev/pytest-cov) ([changelog](https://pytest-cov.readthedocs.io/en/latest/changelog.html)) | `^4.1.0` -> `^5.0.0` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | --- ### Release Notes <details> <summary>psf/black (black)</summary> ### [`v24.4.2`](https://togithub.com/psf/black/blob/HEAD/CHANGES.md#2442) [Compare Source](https://togithub.com/psf/black/compare/24.4.1...24.4.2) This is a bugfix release to fix two regressions in the new f-string parser introduced in 24.4.1. ##### Parser - Fix regression where certain complex f-strings failed to parse ([#4332](https://togithub.com/psf/black/issues/4332)) ##### Performance - Fix bad performance on certain complex string literals ([#4331](https://togithub.com/psf/black/issues/4331)) ### [`v24.4.1`](https://togithub.com/psf/black/blob/HEAD/CHANGES.md#2441) [Compare Source](https://togithub.com/psf/black/compare/24.4.0...24.4.1) ##### Highlights - Add support for the new Python 3.12 f-string syntax introduced by PEP 701 ([#3822](https://togithub.com/psf/black/issues/3822)) ##### Stable style - Fix crash involving indented dummy functions containing newlines ([#4318](https://togithub.com/psf/black/issues/4318)) ##### Parser - Add support for type parameter defaults, a new syntactic feature added to Python 3.13 by PEP 696 ([#4327](https://togithub.com/psf/black/issues/4327)) ##### Integrations - Github Action now works even when `git archive` is skipped ([#4313](https://togithub.com/psf/black/issues/4313)) ### [`v24.4.0`](https://togithub.com/psf/black/blob/HEAD/CHANGES.md#2440) [Compare Source](https://togithub.com/psf/black/compare/24.3.0...24.4.0) ##### Stable style - Fix unwanted crashes caused by AST equivalency check ([#4290](https://togithub.com/psf/black/issues/4290)) ##### Preview style - `if` guards in `case` blocks are now wrapped in parentheses when the line is too long. ([#4269](https://togithub.com/psf/black/issues/4269)) - Stop moving multiline strings to a new line unless inside brackets ([#4289](https://togithub.com/psf/black/issues/4289)) ##### Integrations - Add a new option `use_pyproject` to the GitHub Action `psf/black`. This will read the Black version from `pyproject.toml`. ([#4294](https://togithub.com/psf/black/issues/4294)) ### [`v24.3.0`](https://togithub.com/psf/black/blob/HEAD/CHANGES.md#2430) [Compare Source](https://togithub.com/psf/black/compare/24.2.0...24.3.0) ##### Highlights This release is a milestone: it fixes Black's first CVE security vulnerability. If you run Black on untrusted input, or if you habitually put thousands of leading tab characters in your docstrings, you are strongly encouraged to upgrade immediately to fix [CVE-2024-21503](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-21503). This release also fixes a bug in Black's AST safety check that allowed Black to make incorrect changes to certain f-strings that are valid in Python 3.12 and higher. ##### Stable style - Don't move comments along with delimiters, which could cause crashes ([#4248](https://togithub.com/psf/black/issues/4248)) - Strengthen AST safety check to catch more unsafe changes to strings. Previous versions of Black would incorrectly format the contents of certain unusual f-strings containing nested strings with the same quote type. Now, Black will crash on such strings until support for the new f-string syntax is implemented. ([#4270](https://togithub.com/psf/black/issues/4270)) - Fix a bug where line-ranges exceeding the last code line would not work as expected ([#4273](https://togithub.com/psf/black/issues/4273)) ##### Performance - Fix catastrophic performance on docstrings that contain large numbers of leading tab characters. This fixes [CVE-2024-21503](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-21503). ([#4278](https://togithub.com/psf/black/issues/4278)) ##### Documentation - Note what happens when `--check` is used with `--quiet` ([#4236](https://togithub.com/psf/black/issues/4236)) ### [`v24.2.0`](https://togithub.com/psf/black/blob/HEAD/CHANGES.md#2420) [Compare Source](https://togithub.com/psf/black/compare/24.1.1...24.2.0) ##### Stable style - Fixed a bug where comments where mistakenly removed along with redundant parentheses ([#4218](https://togithub.com/psf/black/issues/4218)) ##### Preview style - Move the `hug_parens_with_braces_and_square_brackets` feature to the unstable style due to an outstanding crash and proposed formatting tweaks ([#4198](https://togithub.com/psf/black/issues/4198)) - Fixed a bug where base expressions caused inconsistent formatting of \*\* in tenary expression ([#4154](https://togithub.com/psf/black/issues/4154)) - Checking for newline before adding one on docstring that is almost at the line limit ([#4185](https://togithub.com/psf/black/issues/4185)) - Remove redundant parentheses in `case` statement `if` guards ([#4214](https://togithub.com/psf/black/issues/4214)). ##### Configuration - Fix issue where *Black* would ignore input files in the presence of symlinks ([#4222](https://togithub.com/psf/black/issues/4222)) - *Black* now ignores `pyproject.toml` that is missing a `tool.black` section when discovering project root and configuration. Since *Black* continues to use version control as an indicator of project root, this is expected to primarily change behavior for users in a monorepo setup (desirably). If you wish to preserve previous behavior, simply add an empty `[tool.black]` to the previously discovered `pyproject.toml` ([#4204](https://togithub.com/psf/black/issues/4204)) ##### Output - Black will swallow any `SyntaxWarning`s or `DeprecationWarning`s produced by the `ast` module when performing equivalence checks ([#4189](https://togithub.com/psf/black/issues/4189)) ##### Integrations - Add a JSONSchema and provide a validate-pyproject entry-point ([#4181](https://togithub.com/psf/black/issues/4181)) ### [`v24.1.1`](https://togithub.com/psf/black/blob/HEAD/CHANGES.md#2411) [Compare Source](https://togithub.com/psf/black/compare/24.1.0...24.1.1) Bugfix release to fix a bug that made Black unusable on certain file systems with strict limits on path length. ##### Preview style - Consistently add trailing comma on typed parameters ([#4164](https://togithub.com/psf/black/issues/4164)) ##### Configuration - Shorten the length of the name of the cache file to fix crashes on file systems that do not support long paths ([#4176](https://togithub.com/psf/black/issues/4176)) ### [`v24.1.0`](https://togithub.com/psf/black/blob/HEAD/CHANGES.md#2410) [Compare Source](https://togithub.com/psf/black/compare/23.12.1...24.1.0) ##### Highlights This release introduces the new 2024 stable style ([#4106](https://togithub.com/psf/black/issues/4106)), stabilizing the following changes: - Add parentheses around `if`-`else` expressions ([#2278](https://togithub.com/psf/black/issues/2278)) - Dummy class and function implementations consisting only of `...` are formatted more compactly ([#3796](https://togithub.com/psf/black/issues/3796)) - If an assignment statement is too long, we now prefer splitting on the right-hand side ([#3368](https://togithub.com/psf/black/issues/3368)) - Hex codes in Unicode escape sequences are now standardized to lowercase ([#2916](https://togithub.com/psf/black/issues/2916)) - Allow empty first lines at the beginning of most blocks ([#3967](https://togithub.com/psf/black/issues/3967), [#4061](https://togithub.com/psf/black/issues/4061)) - Add parentheses around long type annotations ([#3899](https://togithub.com/psf/black/issues/3899)) - Enforce newline after module docstrings ([#3932](https://togithub.com/psf/black/issues/3932), [#4028](https://togithub.com/psf/black/issues/4028)) - Fix incorrect magic trailing comma handling in return types ([#3916](https://togithub.com/psf/black/issues/3916)) - Remove blank lines before class docstrings ([#3692](https://togithub.com/psf/black/issues/3692)) - Wrap multiple context managers in parentheses if combined in a single `with` statement ([#3489](https://togithub.com/psf/black/issues/3489)) - Fix bug in line length calculations for power operations ([#3942](https://togithub.com/psf/black/issues/3942)) - Add trailing commas to collection literals even if there's a comment after the last entry ([#3393](https://togithub.com/psf/black/issues/3393)) - When using `--skip-magic-trailing-comma` or `-C`, trailing commas are stripped from subscript expressions with more than 1 element ([#3209](https://togithub.com/psf/black/issues/3209)) - Add extra blank lines in stubs in a few cases ([#3564](https://togithub.com/psf/black/issues/3564), [#3862](https://togithub.com/psf/black/issues/3862)) - Accept raw strings as docstrings ([#3947](https://togithub.com/psf/black/issues/3947)) - Split long lines in case blocks ([#4024](https://togithub.com/psf/black/issues/4024)) - Stop removing spaces from walrus operators within subscripts ([#3823](https://togithub.com/psf/black/issues/3823)) - Fix incorrect formatting of certain async statements ([#3609](https://togithub.com/psf/black/issues/3609)) - Allow combining `# fmt: skip` with other comments ([#3959](https://togithub.com/psf/black/issues/3959)) There are already a few improvements in the `--preview` style, which are slated for the 2025 stable style. Try them out and [share your feedback](https://togithub.com/psf/black/issues). In the past, the preview style has included some features that we were not able to stabilize. This year, we're adding a separate `--unstable` style for features with known problems. Now, the `--preview` style only includes features that we actually expect to make it into next year's stable style. ##### Stable style Several bug fixes were made in features that are moved to the stable style in this release: - Fix comment handling when parenthesising conditional expressions ([#4134](https://togithub.com/psf/black/issues/4134)) - Fix bug where spaces were not added around parenthesized walruses in subscripts, unlike other binary operators ([#4109](https://togithub.com/psf/black/issues/4109)) - Remove empty lines before docstrings in async functions ([#4132](https://togithub.com/psf/black/issues/4132)) - Address a missing case in the change to allow empty lines at the beginning of all blocks, except immediately before a docstring ([#4130](https://togithub.com/psf/black/issues/4130)) - For stubs, fix logic to enforce empty line after nested classes with bodies ([#4141](https://togithub.com/psf/black/issues/4141)) ##### Preview style - Add `--unstable` style, covering preview features that have known problems that would block them from going into the stable style. Also add the `--enable-unstable-feature` flag; for example, use `--enable-unstable-feature hug_parens_with_braces_and_square_brackets` to apply this preview feature throughout 2024, even if a later Black release downgrades the feature to unstable ([#4096](https://togithub.com/psf/black/issues/4096)) - Format module docstrings the same as class and function docstrings ([#4095](https://togithub.com/psf/black/issues/4095)) - Fix crash when using a walrus in a dictionary ([#4155](https://togithub.com/psf/black/issues/4155)) - Fix unnecessary parentheses when wrapping long dicts ([#4135](https://togithub.com/psf/black/issues/4135)) - Stop normalizing spaces before `# fmt: skip` comments ([#4146](https://togithub.com/psf/black/issues/4146)) ##### Configuration - Print warning when configuration in `pyproject.toml` contains an invalid key ([#4165](https://togithub.com/psf/black/issues/4165)) - Fix symlink handling, properly ignoring symlinks that point outside of root ([#4161](https://togithub.com/psf/black/issues/4161)) - Fix cache mtime logic that resulted in false positive cache hits ([#4128](https://togithub.com/psf/black/issues/4128)) - Remove the long-deprecated `--experimental-string-processing` flag. This feature can currently be enabled with `--preview --enable-unstable-feature string_processing`. ([#4096](https://togithub.com/psf/black/issues/4096)) ##### Integrations - Revert the change to run Black's pre-commit integration only on specific git hooks ([#3940](https://togithub.com/psf/black/issues/3940)) for better compatibility with older versions of pre-commit ([#4137](https://togithub.com/psf/black/issues/4137)) </details> <details> <summary>pycqa/flake8 (flake8)</summary> ### [`v7.1.0`](https://togithub.com/pycqa/flake8/compare/7.0.0...7.1.0) [Compare Source](https://togithub.com/pycqa/flake8/compare/7.0.0...7.1.0) ### [`v7.0.0`](https://togithub.com/pycqa/flake8/compare/6.1.0...7.0.0) [Compare Source](https://togithub.com/pycqa/flake8/compare/6.1.0...7.0.0) </details> <details> <summary>canonical/ops-scenario (ops-scenario)</summary> ### [`v6.1.1`](https://togithub.com/canonical/ops-scenario/compare/6.1.0...6.1.1) [Compare Source](https://togithub.com/canonical/ops-scenario/compare/6.1.0...6.1.1) ### [`v6.1.0`](https://togithub.com/canonical/ops-scenario/compare/6.0.5...6.1.0) [Compare Source](https://togithub.com/canonical/ops-scenario/compare/6.0.5...6.1.0) ### [`v6.0.5`](https://togithub.com/canonical/ops-scenario/compare/6.0.4...6.0.5) [Compare Source](https://togithub.com/canonical/ops-scenario/compare/6.0.4...6.0.5) ### [`v6.0.4`](https://togithub.com/canonical/ops-scenario/compare/6.0.3...6.0.4) [Compare Source](https://togithub.com/canonical/ops-scenario/compare/6.0.3...6.0.4) ### [`v6.0.3`](https://togithub.com/canonical/ops-scenario/compare/6.0.2...6.0.3) [Compare Source](https://togithub.com/canonical/ops-scenario/compare/6.0.2...6.0.3) ### [`v6.0.2`](https://togithub.com/canonical/ops-scenario/compare/6.0.1...6.0.2) [Compare Source](https://togithub.com/canonical/ops-scenario/compare/6.0.1...6.0.2) ### [`v6.0.1`](https://togithub.com/canonical/ops-scenario/compare/6.0...6.0.1) [Compare Source](https://togithub.com/canonical/ops-scenario/compare/6.0...6.0.1) ### [`v6.0`](https://togithub.com/canonical/ops-scenario/compare/5.8.1...6.0) [Compare Source](https://togithub.com/canonical/ops-scenario/compare/5.8.1...6.0) </details> <details> <summary>csachs/pyproject-flake8 (pyproject-flake8)</summary> ### [`v7.0.0`](https://togithub.com/csachs/pyproject-flake8/compare/v6.1.0...v7.0.0) [Compare Source](https://togithub.com/csachs/pyproject-flake8/compare/v6.1.0...v7.0.0) </details> <details> <summary>pytest-dev/pytest (pytest)</summary> ### [`v8.2.2`](https://togithub.com/pytest-dev/pytest/releases/tag/8.2.2) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.2.1...8.2.2) # pytest 8.2.2 (2024-06-04) ## Bug Fixes - [#12355](https://togithub.com/pytest-dev/pytest/issues/12355): Fix possible catastrophic performance slowdown on a certain parametrization pattern involving many higher-scoped parameters. - [#12367](https://togithub.com/pytest-dev/pytest/issues/12367): Fix a regression in pytest 8.2.0 where unittest class instances (a fresh one is created for each test) were not released promptly on test teardown but only on session teardown. - [#12381](https://togithub.com/pytest-dev/pytest/issues/12381): Fix possible "Directory not empty" crashes arising from concurent cache dir (`.pytest_cache`) creation. Regressed in pytest 8.2.0. ## Improved Documentation - [#12290](https://togithub.com/pytest-dev/pytest/issues/12290): Updated Sphinx theme to use Furo instead of Flask, enabling Dark mode theme. - [#12356](https://togithub.com/pytest-dev/pytest/issues/12356): Added a subsection to the documentation for debugging flaky tests to mention lack of thread safety in pytest as a possible source of flakyness. - [#12363](https://togithub.com/pytest-dev/pytest/issues/12363): The documentation webpages now links to a canonical version to reduce outdated documentation in search engine results. ### [`v8.2.1`](https://togithub.com/pytest-dev/pytest/releases/tag/8.2.1) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.2.0...8.2.1) # pytest 8.2.1 (2024-05-19) ## Improvements - [#12334](https://togithub.com/pytest-dev/pytest/issues/12334): Support for Python 3.13 (beta1 at the time of writing). ## Bug Fixes - [#12120](https://togithub.com/pytest-dev/pytest/issues/12120): Fix \[PermissionError]{.title-ref} crashes arising from directories which are not selected on the command-line. - [#12191](https://togithub.com/pytest-dev/pytest/issues/12191): Keyboard interrupts and system exits are now properly handled during the test collection. - [#12300](https://togithub.com/pytest-dev/pytest/issues/12300): Fixed handling of 'Function not implemented' error under squashfuse_ll, which is a different way to say that the mountpoint is read-only. - [#12308](https://togithub.com/pytest-dev/pytest/issues/12308): Fix a regression in pytest 8.2.0 where the permissions of automatically-created `.pytest_cache` directories became `rwx------` instead of the expected `rwxr-xr-x`. ## Trivial/Internal Changes - [#12333](https://togithub.com/pytest-dev/pytest/issues/12333): pytest releases are now attested using the recent [Artifact Attestation](https://github.blog/2024-05-02-introducing-artifact-attestations-now-in-public-beta/) support from GitHub, allowing users to verify the provenance of pytest's sdist and wheel artifacts. ### [`v8.2.0`](https://togithub.com/pytest-dev/pytest/releases/tag/8.2.0) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.1.2...8.2.0) # pytest 8.2.0 (2024-04-27) ## Deprecations - [#12069](https://togithub.com/pytest-dev/pytest/issues/12069): A deprecation warning is now raised when implementations of one of the following hooks request a deprecated `py.path.local` parameter instead of the `pathlib.Path` parameter which replaced it: - `pytest_ignore_collect`{.interpreted-text role="hook"} - the `path` parameter - use `collection_path` instead. - `pytest_collect_file`{.interpreted-text role="hook"} - the `path` parameter - use `file_path` instead. - `pytest_pycollect_makemodule`{.interpreted-text role="hook"} - the `path` parameter - use `module_path` instead. - `pytest_report_header`{.interpreted-text role="hook"} - the `startdir` parameter - use `start_path` instead. - `pytest_report_collectionfinish`{.interpreted-text role="hook"} - the `startdir` parameter - use `start_path` instead. The replacement parameters are available since pytest 7.0.0. The old parameters will be removed in pytest 9.0.0. See `legacy-path-hooks-deprecated`{.interpreted-text role="ref"} for more details. ## Features - [#11871](https://togithub.com/pytest-dev/pytest/issues/11871): Added support for reading command line arguments from a file using the prefix character `@`, like e.g.: `pytest @tests.txt`. The file must have one argument per line. See `Read arguments from file <args-from-file>`{.interpreted-text role="ref"} for details. ## Improvements - [#11523](https://togithub.com/pytest-dev/pytest/issues/11523): `pytest.importorskip`{.interpreted-text role="func"} will now issue a warning if the module could be found, but raised `ImportError`{.interpreted-text role="class"} instead of `ModuleNotFoundError`{.interpreted-text role="class"}. The warning can be suppressed by passing `exc_type=ImportError` to `pytest.importorskip`{.interpreted-text role="func"}. See `import-or-skip-import-error`{.interpreted-text role="ref"} for details. - [#11728](https://togithub.com/pytest-dev/pytest/issues/11728): For `unittest`-based tests, exceptions during class cleanup (as raised by functions registered with `TestCase.addClassCleanup <unittest.TestCase.addClassCleanup>`{.interpreted-text role="meth"}) are now reported instead of silently failing. - [#11777](https://togithub.com/pytest-dev/pytest/issues/11777): Text is no longer truncated in the `short test summary info` section when `-vv` is given. - [#12112](https://togithub.com/pytest-dev/pytest/issues/12112): Improved namespace packages detection when `consider_namespace_packages`{.interpreted-text role="confval"} is enabled, covering more situations (like editable installs). - [#9502](https://togithub.com/pytest-dev/pytest/issues/9502): Added `PYTEST_VERSION`{.interpreted-text role="envvar"} environment variable which is defined at the start of the pytest session and undefined afterwards. It contains the value of `pytest.__version__`, and among other things can be used to easily check if code is running from within a pytest run. ## Bug Fixes - [#12065](https://togithub.com/pytest-dev/pytest/issues/12065): Fixed a regression in pytest 8.0.0 where test classes containing `setup_method` and tests using `@staticmethod` or `@classmethod` would crash with `AttributeError: 'NoneType' object has no attribute 'setup_method'`. Now the `request.instance <pytest.FixtureRequest.instance>`{.interpreted-text role="attr"} attribute of tests using `@staticmethod` and `@classmethod` is no longer `None`, but a fresh instance of the class, like in non-static methods. Previously it was `None`, and all fixtures of such tests would share a single `self`. - [#12135](https://togithub.com/pytest-dev/pytest/issues/12135): Fixed issue where fixtures adding their finalizer multiple times to fixtures they request would cause unreliable and non-intuitive teardown ordering in some instances. - [#12194](https://togithub.com/pytest-dev/pytest/issues/12194): Fixed a bug with `--importmode=importlib` and `--doctest-modules` where child modules did not appear as attributes in parent modules. - [#1489](https://togithub.com/pytest-dev/pytest/issues/1489): Fixed some instances where teardown of higher-scoped fixtures was not happening in the reverse order they were initialized in. ## Trivial/Internal Changes - [#12069](https://togithub.com/pytest-dev/pytest/issues/12069): `pluggy>=1.5.0` is now required. - [#12167](https://togithub.com/pytest-dev/pytest/issues/12167): `cache <cache>`{.interpreted-text role="ref"}: create supporting files (`CACHEDIR.TAG`, `.gitignore`, etc.) in a temporary directory to provide atomic semantics. ### [`v8.1.2`](https://togithub.com/pytest-dev/pytest/releases/tag/8.1.2) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.1.1...8.1.2) # pytest 8.1.2 (2024-04-26) ## Bug Fixes - [#12114](https://togithub.com/pytest-dev/pytest/issues/12114): Fixed error in `pytest.approx`{.interpreted-text role="func"} when used with \[numpy]{.title-ref} arrays and comparing with other types. ### [`v8.1.1`](https://togithub.com/pytest-dev/pytest/releases/tag/8.1.1) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.1.0...8.1.1) # pytest 8.1.1 (2024-03-08) ::: {.note} ::: {.title} Note ::: This release is not a usual bug fix release -- it contains features and improvements, being a follow up to `8.1.0`, which has been yanked from PyPI. ::: ## Features - [#11475](https://togithub.com/pytest-dev/pytest/issues/11475): Added the new `consider_namespace_packages`{.interpreted-text role="confval"} configuration option, defaulting to `False`. If set to `True`, pytest will attempt to identify modules that are part of [namespace packages](https://packaging.python.org/en/latest/guides/packaging-namespace-packages) when importing modules. - [#11653](https://togithub.com/pytest-dev/pytest/issues/11653): Added the new `verbosity_test_cases`{.interpreted-text role="confval"} configuration option for fine-grained control of test execution verbosity. See `Fine-grained verbosity <pytest.fine_grained_verbosity>`{.interpreted-text role="ref"} for more details. ## Improvements - [#10865](https://togithub.com/pytest-dev/pytest/issues/10865): `pytest.warns`{.interpreted-text role="func"} now validates that `warnings.warn`{.interpreted-text role="func"} was called with a \[str]{.title-ref} or a \[Warning]{.title-ref}. Currently in Python it is possible to use other types, however this causes an exception when `warnings.filterwarnings`{.interpreted-text role="func"} is used to filter those warnings (see [CPython #103577](https://togithub.com/python/cpython/issues/103577) for a discussion). While this can be considered a bug in CPython, we decided to put guards in pytest as the error message produced without this check in place is confusing. - [#11311](https://togithub.com/pytest-dev/pytest/issues/11311): When using `--override-ini` for paths in invocations without a configuration file defined, the current working directory is used as the relative directory. Previoulsy this would raise an `AssertionError`{.interpreted-text role="class"}. - [#11475](https://togithub.com/pytest-dev/pytest/issues/11475): `--import-mode=importlib <import-mode-importlib>`{.interpreted-text role="ref"} now tries to import modules using the standard import mechanism (but still without changing :py`sys.path`{.interpreted-text role="data"}), falling back to importing modules directly only if that fails. This means that installed packages will be imported under their canonical name if possible first, for example `app.core.models`, instead of having the module name always be derived from their path (for example `.env310.lib.site_packages.app.core.models`). - [#11801](https://togithub.com/pytest-dev/pytest/issues/11801): Added the `iter_parents() <_pytest.nodes.Node.iter_parents>`{.interpreted-text role="func"} helper method on nodes. It is similar to `listchain <_pytest.nodes.Node.listchain>`{.interpreted-text role="func"}, but goes from bottom to top, and returns an iterator, not a list. - [#11850](https://togithub.com/pytest-dev/pytest/issues/11850): Added support for `sys.last_exc`{.interpreted-text role="data"} for post-mortem debugging on Python>=3.12. - [#11962](https://togithub.com/pytest-dev/pytest/issues/11962): In case no other suitable candidates for configuration file are found, a `pyproject.toml` (even without a `[tool.pytest.ini_options]` table) will be considered as the configuration file and define the `rootdir`. - [#11978](https://togithub.com/pytest-dev/pytest/issues/11978): Add `--log-file-mode` option to the logging plugin, enabling appending to log-files. This option accepts either `"w"` or `"a"` and defaults to `"w"`. Previously, the mode was hard-coded to be `"w"` which truncates the file before logging. - [#12047](https://togithub.com/pytest-dev/pytest/issues/12047): When multiple finalizers of a fixture raise an exception, now all exceptions are reported as an exception group. Previously, only the first exception was reported. ## Bug Fixes - [#11475](https://togithub.com/pytest-dev/pytest/issues/11475): Fixed regression where `--importmode=importlib` would import non-test modules more than once. - [#11904](https://togithub.com/pytest-dev/pytest/issues/11904): Fixed a regression in pytest 8.0.0 that would cause test collection to fail due to permission errors when using `--pyargs`. This change improves the collection tree for tests specified using `--pyargs`, see `12043`{.interpreted-text role="pull"} for a comparison with pytest 8.0 and <8. - [#12011](https://togithub.com/pytest-dev/pytest/issues/12011): Fixed a regression in 8.0.1 whereby `setup_module` xunit-style fixtures are not executed when `--doctest-modules` is passed. - [#12014](https://togithub.com/pytest-dev/pytest/issues/12014): Fix the `stacklevel` used when warning about marks used on fixtures. - [#12039](https://togithub.com/pytest-dev/pytest/issues/12039): Fixed a regression in `8.0.2` where tests created using `tmp_path`{.interpreted-text role="fixture"} have been collected multiple times in CI under Windows. ## Improved Documentation - [#11790](https://togithub.com/pytest-dev/pytest/issues/11790): Documented the retention of temporary directories created using the `tmp_path` fixture in more detail. ## Trivial/Internal Changes - [#11785](https://togithub.com/pytest-dev/pytest/issues/11785): Some changes were made to private functions which may affect plugins which access them: - `FixtureManager._getautousenames()` now takes a `Node` itself instead of the nodeid. - `FixtureManager.getfixturedefs()` now takes the `Node` itself instead of the nodeid. - The `_pytest.nodes.iterparentnodeids()` function is removed without replacement. Prefer to traverse the node hierarchy itself instead. If you really need to, copy the function from the previous pytest release. - [#12069](https://togithub.com/pytest-dev/pytest/issues/12069): Delayed the deprecation of the following features to `9.0.0`: - `node-ctor-fspath-deprecation`{.interpreted-text role="ref"}. - `legacy-path-hooks-deprecated`{.interpreted-text role="ref"}. It was discovered after `8.1.0` was released that the warnings about the impeding removal were not being displayed, so the team decided to revert the removal. This is the reason for `8.1.0` being yanked. # pytest 8.1.0 (YANKED) ::: {.note} ::: {.title} Note ::: This release has been **yanked**: it broke some plugins without the proper warning period, due to some warnings not showing up as expected. See [#12069](https://togithub.com/pytest-dev/pytest/issues/12069). ::: ### [`v8.1.0`](https://togithub.com/pytest-dev/pytest/releases/tag/8.1.0) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.0.2...8.1.0) # pytest 8.1.0 (YANKED) > \[!IMPORTANT]\ > This release has been **yanked**: it broke some plugins without the proper warning period, due to some warnings not showing up as expected. See [#12069](https://togithub.com/pytest-dev/pytest/issues/12069). ## Features - [#11475](https://togithub.com/pytest-dev/pytest/issues/11475): Added the new `consider_namespace_packages`{.interpreted-text role="confval"} configuration option, defaulting to `False`. If set to `True`, pytest will attempt to identify modules that are part of [namespace packages](https://packaging.python.org/en/latest/guides/packaging-namespace-packages) when importing modules. - [#11653](https://togithub.com/pytest-dev/pytest/issues/11653): Added the new `verbosity_test_cases`{.interpreted-text role="confval"} configuration option for fine-grained control of test execution verbosity. See `Fine-grained verbosity <pytest.fine_grained_verbosity>`{.interpreted-text role="ref"} for more details. ## Improvements - [#10865](https://togithub.com/pytest-dev/pytest/issues/10865): `pytest.warns`{.interpreted-text role="func"} now validates that `warnings.warn`{.interpreted-text role="func"} was called with a \[str]{.title-ref} or a \[Warning]{.title-ref}. Currently in Python it is possible to use other types, however this causes an exception when `warnings.filterwarnings`{.interpreted-text role="func"} is used to filter those warnings (see [CPython #103577](https://togithub.com/python/cpython/issues/103577) for a discussion). While this can be considered a bug in CPython, we decided to put guards in pytest as the error message produced without this check in place is confusing. - [#11311](https://togithub.com/pytest-dev/pytest/issues/11311): When using `--override-ini` for paths in invocations without a configuration file defined, the current working directory is used as the relative directory. Previoulsy this would raise an `AssertionError`{.interpreted-text role="class"}. - [#11475](https://togithub.com/pytest-dev/pytest/issues/11475): `--import-mode=importlib <import-mode-importlib>`{.interpreted-text role="ref"} now tries to import modules using the standard import mechanism (but still without changing :py`sys.path`{.interpreted-text role="data"}), falling back to importing modules directly only if that fails. This means that installed packages will be imported under their canonical name if possible first, for example `app.core.models`, instead of having the module name always be derived from their path (for example `.env310.lib.site_packages.app.core.models`). - [#11801](https://togithub.com/pytest-dev/pytest/issues/11801): Added the `iter_parents() <_pytest.nodes.Node.iter_parents>`{.interpreted-text role="func"} helper method on nodes. It is similar to `listchain <_pytest.nodes.Node.listchain>`{.interpreted-text role="func"}, but goes from bottom to top, and returns an iterator, not a list. - [#11850](https://togithub.com/pytest-dev/pytest/issues/11850): Added support for `sys.last_exc`{.interpreted-text role="data"} for post-mortem debugging on Python>=3.12. - [#11962](https://togithub.com/pytest-dev/pytest/issues/11962): In case no other suitable candidates for configuration file are found, a `pyproject.toml` (even without a `[tool.pytest.ini_options]` table) will be considered as the configuration file and define the `rootdir`. - [#11978](https://togithub.com/pytest-dev/pytest/issues/11978): Add `--log-file-mode` option to the logging plugin, enabling appending to log-files. This option accepts either `"w"` or `"a"` and defaults to `"w"`. Previously, the mode was hard-coded to be `"w"` which truncates the file before logging. - [#12047](https://togithub.com/pytest-dev/pytest/issues/12047): When multiple finalizers of a fixture raise an exception, now all exceptions are reported as an exception group. Previously, only the first exception was reported. ## Bug Fixes - [#11904](https://togithub.com/pytest-dev/pytest/issues/11904): Fixed a regression in pytest 8.0.0 that would cause test collection to fail due to permission errors when using `--pyargs`. This change improves the collection tree for tests specified using `--pyargs`, see `12043`{.interpreted-text role="pull"} for a comparison with pytest 8.0 and <8. - [#12011](https://togithub.com/pytest-dev/pytest/issues/12011): Fixed a regression in 8.0.1 whereby `setup_module` xunit-style fixtures are not executed when `--doctest-modules` is passed. - [#12014](https://togithub.com/pytest-dev/pytest/issues/12014): Fix the `stacklevel` used when warning about marks used on fixtures. - [#12039](https://togithub.com/pytest-dev/pytest/issues/12039): Fixed a regression in `8.0.2` where tests created using `tmp_path`{.interpreted-text role="fixture"} have been collected multiple times in CI under Windows. ## Improved Documentation - [#11790](https://togithub.com/pytest-dev/pytest/issues/11790): Documented the retention of temporary directories created using the `tmp_path` fixture in more detail. ## Trivial/Internal Changes - [#11785](https://togithub.com/pytest-dev/pytest/issues/11785): Some changes were made to private functions which may affect plugins which access them: - `FixtureManager._getautousenames()` now takes a `Node` itself instead of the nodeid. - `FixtureManager.getfixturedefs()` now takes the `Node` itself instead of the nodeid. - The `_pytest.nodes.iterparentnodeids()` function is removed without replacement. Prefer to traverse the node hierarchy itself instead. If you really need to, copy the function from the previous pytest release. ### [`v8.0.2`](https://togithub.com/pytest-dev/pytest/releases/tag/8.0.2) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.0.1...8.0.2) # pytest 8.0.2 (2024-02-24) ## Bug Fixes - [#11895](https://togithub.com/pytest-dev/pytest/issues/11895): Fix collection on Windows where initial paths contain the short version of a path (for example `c:\PROGRA~1\tests`). - [#11953](https://togithub.com/pytest-dev/pytest/issues/11953): Fix an `IndexError` crash raising from `getstatementrange_ast`. - [#12021](https://togithub.com/pytest-dev/pytest/issues/12021): Reverted a fix to \[--maxfail]{.title-ref} handling in pytest 8.0.0 because it caused a regression in pytest-xdist whereby session fixture teardowns may get executed multiple times when the max-fails is reached. ### [`v8.0.1`](https://togithub.com/pytest-dev/pytest/releases/tag/8.0.1) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.0.0...8.0.1) # pytest 8.0.1 (2024-02-16) ## Bug Fixes - [#11875](https://togithub.com/pytest-dev/pytest/issues/11875): Correctly handle errors from `getpass.getuser`{.interpreted-text role="func"} in Python 3.13. - [#11879](https://togithub.com/pytest-dev/pytest/issues/11879): Fix an edge case where `ExceptionInfo._stringify_exception` could crash `pytest.raises`{.interpreted-text role="func"}. - [#11906](https://togithub.com/pytest-dev/pytest/issues/11906): Fix regression with `pytest.warns`{.interpreted-text role="func"} using custom warning subclasses which have more than one parameter in their \[\__init\_\_]{.title-ref}. - [#11907](https://togithub.com/pytest-dev/pytest/issues/11907): Fix a regression in pytest 8.0.0 whereby calling `pytest.skip`{.interpreted-text role="func"} and similar control-flow exceptions within a `pytest.warns()`{.interpreted-text role="func"} block would get suppressed instead of propagating. - [#11929](https://togithub.com/pytest-dev/pytest/issues/11929): Fix a regression in pytest 8.0.0 whereby autouse fixtures defined in a module get ignored by the doctests in the module. - [#11937](https://togithub.com/pytest-dev/pytest/issues/11937): Fix a regression in pytest 8.0.0 whereby items would be collected in reverse order in some circumstances. ### [`v8.0.0`](https://togithub.com/pytest-dev/pytest/releases/tag/8.0.0): pytest 8.0.0 (2024-01-27) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/7.4.4...8.0.0) See [8.0.0rc1](https://togithub.com/pytest-dev/pytest/releases/tag/8.0.0rc1) and [8.0.0rc2](https://togithub.com/pytest-dev/pytest/releases/tag/8.0.0rc2) for the full changes since pytest 7.4! #### Bug Fixes - [#11842](https://togithub.com/pytest-dev/pytest/issues/11842): Properly escape the `reason` of a `skip <pytest.mark.skip ref>`{.interpreted-text role="ref"} mark when writing JUnit XML files. - [#11861](https://togithub.com/pytest-dev/pytest/issues/11861): Avoid microsecond exceeds `1_000_000` when using `log-date-format` with `%f` specifier, which might cause the test suite to crash. </details> <details> <summary>pytest-dev/pytest-cov (pytest-cov)</summary> ### [`v5.0.0`](https://togithub.com/pytest-dev/pytest-cov/blob/HEAD/CHANGELOG.rst#500-2024-03-24) [Compare Source](https://togithub.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0) - Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in `#623 <https://github.com/pytest-dev/pytest-cov/pull/623>`\_. - Switched docs theme to Furo. - Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in `#630 <https://github.com/pytest-dev/pytest-cov/pull/630>`*, `#631 <https://github.com/pytest-dev/pytest-cov/pull/631>`*, `#632 <https://github.com/pytest-dev/pytest-cov/pull/632>`\_ and `#633 <https://github.com/pytest-dev/pytest-cov/pull/633>`\_. - Added a `pyproject.toml` example in the docs. Contributed by Dawn James in `#626 <https://github.com/pytest-dev/pytest-cov/pull/626>`\_. - Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in `#584 <https://github.com/pytest-dev/pytest-cov/pull/584>`\_. </details> --- ### Configuration 📅 **Schedule**: Branch creation - "after 1am and before 3am every weekday" in timezone Etc/UTC, Automerge - At any time (no schedule defined). 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox. 👻 **Immortal**: This PR will be recreated if closed unmerged. Get [config help](https://togithub.com/renovatebot/renovate/discussions) if that's undesired. --- - [ ] If you want to rebase/retry this PR, check this box --- This PR has been generated by [Mend Renovate](https://www.mend.io/free-developer-tools/renovate/). View repository job log [here](https://developer.mend.io/github/canonical/mysql-router-k8s-operator).  --------- Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> Co-authored-by: Carl Csaposs <[email protected]>

[![Mend Renovate](https://app.renovatebot.com/images/banner.svg)](https://renovatebot.com) This PR contains the following updates: | Package | Change | Age | Adoption | Passing | Confidence | |---|---|---|---|---|---| | [black](https://togithub.com/psf/black) ([changelog](https://togithub.com/psf/black/blob/main/CHANGES.md)) | `^23.12.1` -> `^24.4.2` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/black/24.4.2?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/black/24.4.2?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/black/23.12.1/24.4.2?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/black/23.12.1/24.4.2?slim=true)](https://docs.renovatebot.com/merge-confidence/) | | [flake8](https://togithub.com/pycqa/flake8) ([changelog](https://flake8.pycqa.org/en/latest/release-notes/index.html)) | `^6.1.0` -> `^7.1.0` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/flake8/7.1.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/flake8/7.1.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/flake8/6.1.0/7.1.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/flake8/6.1.0/7.1.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | | [ops-scenario](https://togithub.com/canonical/ops-scenario) | `^5.8.1` -> `^6.1.1` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/ops-scenario/6.1.1?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/ops-scenario/6.1.1?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/ops-scenario/5.8.1/6.1.1?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/ops-scenario/5.8.1/6.1.1?slim=true)](https://docs.renovatebot.com/merge-confidence/) | | [pyproject-flake8](https://togithub.com/csachs/pyproject-flake8) | `^6.1.0` -> `^7.0.0` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/pyproject-flake8/7.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/pyproject-flake8/7.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/pyproject-flake8/6.1.0/7.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/pyproject-flake8/6.1.0/7.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | | [pytest](https://togithub.com/pytest-dev/pytest) ([changelog](https://docs.pytest.org/en/stable/changelog.html)) | `^7.4.4` -> `^8.2.2` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/pytest/8.2.2?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/pytest/8.2.2?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/pytest/7.4.4/8.2.2?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/pytest/7.4.4/8.2.2?slim=true)](https://docs.renovatebot.com/merge-confidence/) | | [pytest-cov](https://togithub.com/pytest-dev/pytest-cov) ([changelog](https://pytest-cov.readthedocs.io/en/latest/changelog.html)) | `^4.1.0` -> `^5.0.0` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | --- ### Release Notes <details> <summary>psf/black (black)</summary> ### [`v24.4.2`](https://togithub.com/psf/black/blob/HEAD/CHANGES.md#2442) [Compare Source](https://togithub.com/psf/black/compare/24.4.1...24.4.2) This is a bugfix release to fix two regressions in the new f-string parser introduced in 24.4.1. ##### Parser - Fix regression where certain complex f-strings failed to parse ([#4332](https://togithub.com/psf/black/issues/4332)) ##### Performance - Fix bad performance on certain complex string literals ([#4331](https://togithub.com/psf/black/issues/4331)) ### [`v24.4.1`](https://togithub.com/psf/black/blob/HEAD/CHANGES.md#2441) [Compare Source](https://togithub.com/psf/black/compare/24.4.0...24.4.1) ##### Highlights - Add support for the new Python 3.12 f-string syntax introduced by PEP 701 ([#3822](https://togithub.com/psf/black/issues/3822)) ##### Stable style - Fix crash involving indented dummy functions containing newlines ([#4318](https://togithub.com/psf/black/issues/4318)) ##### Parser - Add support for type parameter defaults, a new syntactic feature added to Python 3.13 by PEP 696 ([#4327](https://togithub.com/psf/black/issues/4327)) ##### Integrations - Github Action now works even when `git archive` is skipped ([#4313](https://togithub.com/psf/black/issues/4313)) ### [`v24.4.0`](https://togithub.com/psf/black/blob/HEAD/CHANGES.md#2440) [Compare Source](https://togithub.com/psf/black/compare/24.3.0...24.4.0) ##### Stable style - Fix unwanted crashes caused by AST equivalency check ([#4290](https://togithub.com/psf/black/issues/4290)) ##### Preview style - `if` guards in `case` blocks are now wrapped in parentheses when the line is too long. ([#4269](https://togithub.com/psf/black/issues/4269)) - Stop moving multiline strings to a new line unless inside brackets ([#4289](https://togithub.com/psf/black/issues/4289)) ##### Integrations - Add a new option `use_pyproject` to the GitHub Action `psf/black`. This will read the Black version from `pyproject.toml`. ([#4294](https://togithub.com/psf/black/issues/4294)) ### [`v24.3.0`](https://togithub.com/psf/black/blob/HEAD/CHANGES.md#2430) [Compare Source](https://togithub.com/psf/black/compare/24.2.0...24.3.0) ##### Highlights This release is a milestone: it fixes Black's first CVE security vulnerability. If you run Black on untrusted input, or if you habitually put thousands of leading tab characters in your docstrings, you are strongly encouraged to upgrade immediately to fix [CVE-2024-21503](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-21503). This release also fixes a bug in Black's AST safety check that allowed Black to make incorrect changes to certain f-strings that are valid in Python 3.12 and higher. ##### Stable style - Don't move comments along with delimiters, which could cause crashes ([#4248](https://togithub.com/psf/black/issues/4248)) - Strengthen AST safety check to catch more unsafe changes to strings. Previous versions of Black would incorrectly format the contents of certain unusual f-strings containing nested strings with the same quote type. Now, Black will crash on such strings until support for the new f-string syntax is implemented. ([#4270](https://togithub.com/psf/black/issues/4270)) - Fix a bug where line-ranges exceeding the last code line would not work as expected ([#4273](https://togithub.com/psf/black/issues/4273)) ##### Performance - Fix catastrophic performance on docstrings that contain large numbers of leading tab characters. This fixes [CVE-2024-21503](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-21503). ([#4278](https://togithub.com/psf/black/issues/4278)) ##### Documentation - Note what happens when `--check` is used with `--quiet` ([#4236](https://togithub.com/psf/black/issues/4236)) ### [`v24.2.0`](https://togithub.com/psf/black/blob/HEAD/CHANGES.md#2420) [Compare Source](https://togithub.com/psf/black/compare/24.1.1...24.2.0) ##### Stable style - Fixed a bug where comments where mistakenly removed along with redundant parentheses ([#4218](https://togithub.com/psf/black/issues/4218)) ##### Preview style - Move the `hug_parens_with_braces_and_square_brackets` feature to the unstable style due to an outstanding crash and proposed formatting tweaks ([#4198](https://togithub.com/psf/black/issues/4198)) - Fixed a bug where base expressions caused inconsistent formatting of \*\* in tenary expression ([#4154](https://togithub.com/psf/black/issues/4154)) - Checking for newline before adding one on docstring that is almost at the line limit ([#4185](https://togithub.com/psf/black/issues/4185)) - Remove redundant parentheses in `case` statement `if` guards ([#4214](https://togithub.com/psf/black/issues/4214)). ##### Configuration - Fix issue where *Black* would ignore input files in the presence of symlinks ([#4222](https://togithub.com/psf/black/issues/4222)) - *Black* now ignores `pyproject.toml` that is missing a `tool.black` section when discovering project root and configuration. Since *Black* continues to use version control as an indicator of project root, this is expected to primarily change behavior for users in a monorepo setup (desirably). If you wish to preserve previous behavior, simply add an empty `[tool.black]` to the previously discovered `pyproject.toml` ([#4204](https://togithub.com/psf/black/issues/4204)) ##### Output - Black will swallow any `SyntaxWarning`s or `DeprecationWarning`s produced by the `ast` module when performing equivalence checks ([#4189](https://togithub.com/psf/black/issues/4189)) ##### Integrations - Add a JSONSchema and provide a validate-pyproject entry-point ([#4181](https://togithub.com/psf/black/issues/4181)) ### [`v24.1.1`](https://togithub.com/psf/black/blob/HEAD/CHANGES.md#2411) [Compare Source](https://togithub.com/psf/black/compare/24.1.0...24.1.1) Bugfix release to fix a bug that made Black unusable on certain file systems with strict limits on path length. ##### Preview style - Consistently add trailing comma on typed parameters ([#4164](https://togithub.com/psf/black/issues/4164)) ##### Configuration - Shorten the length of the name of the cache file to fix crashes on file systems that do not support long paths ([#4176](https://togithub.com/psf/black/issues/4176)) ### [`v24.1.0`](https://togithub.com/psf/black/blob/HEAD/CHANGES.md#2410) [Compare Source](https://togithub.com/psf/black/compare/23.12.1...24.1.0) ##### Highlights This release introduces the new 2024 stable style ([#4106](https://togithub.com/psf/black/issues/4106)), stabilizing the following changes: - Add parentheses around `if`-`else` expressions ([#2278](https://togithub.com/psf/black/issues/2278)) - Dummy class and function implementations consisting only of `...` are formatted more compactly ([#3796](https://togithub.com/psf/black/issues/3796)) - If an assignment statement is too long, we now prefer splitting on the right-hand side ([#3368](https://togithub.com/psf/black/issues/3368)) - Hex codes in Unicode escape sequences are now standardized to lowercase ([#2916](https://togithub.com/psf/black/issues/2916)) - Allow empty first lines at the beginning of most blocks ([#3967](https://togithub.com/psf/black/issues/3967), [#4061](https://togithub.com/psf/black/issues/4061)) - Add parentheses around long type annotations ([#3899](https://togithub.com/psf/black/issues/3899)) - Enforce newline after module docstrings ([#3932](https://togithub.com/psf/black/issues/3932), [#4028](https://togithub.com/psf/black/issues/4028)) - Fix incorrect magic trailing comma handling in return types ([#3916](https://togithub.com/psf/black/issues/3916)) - Remove blank lines before class docstrings ([#3692](https://togithub.com/psf/black/issues/3692)) - Wrap multiple context managers in parentheses if combined in a single `with` statement ([#3489](https://togithub.com/psf/black/issues/3489)) - Fix bug in line length calculations for power operations ([#3942](https://togithub.com/psf/black/issues/3942)) - Add trailing commas to collection literals even if there's a comment after the last entry ([#3393](https://togithub.com/psf/black/issues/3393)) - When using `--skip-magic-trailing-comma` or `-C`, trailing commas are stripped from subscript expressions with more than 1 element ([#3209](https://togithub.com/psf/black/issues/3209)) - Add extra blank lines in stubs in a few cases ([#3564](https://togithub.com/psf/black/issues/3564), [#3862](https://togithub.com/psf/black/issues/3862)) - Accept raw strings as docstrings ([#3947](https://togithub.com/psf/black/issues/3947)) - Split long lines in case blocks ([#4024](https://togithub.com/psf/black/issues/4024)) - Stop removing spaces from walrus operators within subscripts ([#3823](https://togithub.com/psf/black/issues/3823)) - Fix incorrect formatting of certain async statements ([#3609](https://togithub.com/psf/black/issues/3609)) - Allow combining `# fmt: skip` with other comments ([#3959](https://togithub.com/psf/black/issues/3959)) There are already a few improvements in the `--preview` style, which are slated for the 2025 stable style. Try them out and [share your feedback](https://togithub.com/psf/black/issues). In the past, the preview style has included some features that we were not able to stabilize. This year, we're adding a separate `--unstable` style for features with known problems. Now, the `--preview` style only includes features that we actually expect to make it into next year's stable style. ##### Stable style Several bug fixes were made in features that are moved to the stable style in this release: - Fix comment handling when parenthesising conditional expressions ([#4134](https://togithub.com/psf/black/issues/4134)) - Fix bug where spaces were not added around parenthesized walruses in subscripts, unlike other binary operators ([#4109](https://togithub.com/psf/black/issues/4109)) - Remove empty lines before docstrings in async functions ([#4132](https://togithub.com/psf/black/issues/4132)) - Address a missing case in the change to allow empty lines at the beginning of all blocks, except immediately before a docstring ([#4130](https://togithub.com/psf/black/issues/4130)) - For stubs, fix logic to enforce empty line after nested classes with bodies ([#4141](https://togithub.com/psf/black/issues/4141)) ##### Preview style - Add `--unstable` style, covering preview features that have known problems that would block them from going into the stable style. Also add the `--enable-unstable-feature` flag; for example, use `--enable-unstable-feature hug_parens_with_braces_and_square_brackets` to apply this preview feature throughout 2024, even if a later Black release downgrades the feature to unstable ([#4096](https://togithub.com/psf/black/issues/4096)) - Format module docstrings the same as class and function docstrings ([#4095](https://togithub.com/psf/black/issues/4095)) - Fix crash when using a walrus in a dictionary ([#4155](https://togithub.com/psf/black/issues/4155)) - Fix unnecessary parentheses when wrapping long dicts ([#4135](https://togithub.com/psf/black/issues/4135)) - Stop normalizing spaces before `# fmt: skip` comments ([#4146](https://togithub.com/psf/black/issues/4146)) ##### Configuration - Print warning when configuration in `pyproject.toml` contains an invalid key ([#4165](https://togithub.com/psf/black/issues/4165)) - Fix symlink handling, properly ignoring symlinks that point outside of root ([#4161](https://togithub.com/psf/black/issues/4161)) - Fix cache mtime logic that resulted in false positive cache hits ([#4128](https://togithub.com/psf/black/issues/4128)) - Remove the long-deprecated `--experimental-string-processing` flag. This feature can currently be enabled with `--preview --enable-unstable-feature string_processing`. ([#4096](https://togithub.com/psf/black/issues/4096)) ##### Integrations - Revert the change to run Black's pre-commit integration only on specific git hooks ([#3940](https://togithub.com/psf/black/issues/3940)) for better compatibility with older versions of pre-commit ([#4137](https://togithub.com/psf/black/issues/4137)) </details> <details> <summary>pycqa/flake8 (flake8)</summary> ### [`v7.1.0`](https://togithub.com/pycqa/flake8/compare/7.0.0...7.1.0) [Compare Source](https://togithub.com/pycqa/flake8/compare/7.0.0...7.1.0) ### [`v7.0.0`](https://togithub.com/pycqa/flake8/compare/6.1.0...7.0.0) [Compare Source](https://togithub.com/pycqa/flake8/compare/6.1.0...7.0.0) </details> <details> <summary>canonical/ops-scenario (ops-scenario)</summary> ### [`v6.1.1`](https://togithub.com/canonical/ops-scenario/compare/6.1.0...6.1.1) [Compare Source](https://togithub.com/canonical/ops-scenario/compare/6.1.0...6.1.1) ### [`v6.1.0`](https://togithub.com/canonical/ops-scenario/compare/6.0.5...6.1.0) [Compare Source](https://togithub.com/canonical/ops-scenario/compare/6.0.5...6.1.0) ### [`v6.0.5`](https://togithub.com/canonical/ops-scenario/compare/6.0.4...6.0.5) [Compare Source](https://togithub.com/canonical/ops-scenario/compare/6.0.4...6.0.5) ### [`v6.0.4`](https://togithub.com/canonical/ops-scenario/compare/6.0.3...6.0.4) [Compare Source](https://togithub.com/canonical/ops-scenario/compare/6.0.3...6.0.4) ### [`v6.0.3`](https://togithub.com/canonical/ops-scenario/compare/6.0.2...6.0.3) [Compare Source](https://togithub.com/canonical/ops-scenario/compare/6.0.2...6.0.3) ### [`v6.0.2`](https://togithub.com/canonical/ops-scenario/compare/6.0.1...6.0.2) [Compare Source](https://togithub.com/canonical/ops-scenario/compare/6.0.1...6.0.2) ### [`v6.0.1`](https://togithub.com/canonical/ops-scenario/compare/6.0...6.0.1) [Compare Source](https://togithub.com/canonical/ops-scenario/compare/6.0...6.0.1) ### [`v6.0`](https://togithub.com/canonical/ops-scenario/compare/5.8.1...6.0) [Compare Source](https://togithub.com/canonical/ops-scenario/compare/5.8.1...6.0) </details> <details> <summary>csachs/pyproject-flake8 (pyproject-flake8)</summary> ### [`v7.0.0`](https://togithub.com/csachs/pyproject-flake8/compare/v6.1.0...v7.0.0) [Compare Source](https://togithub.com/csachs/pyproject-flake8/compare/v6.1.0...v7.0.0) </details> <details> <summary>pytest-dev/pytest (pytest)</summary> ### [`v8.2.2`](https://togithub.com/pytest-dev/pytest/releases/tag/8.2.2) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.2.1...8.2.2) # pytest 8.2.2 (2024-06-04) ## Bug Fixes - [#12355](https://togithub.com/pytest-dev/pytest/issues/12355): Fix possible catastrophic performance slowdown on a certain parametrization pattern involving many higher-scoped parameters. - [#12367](https://togithub.com/pytest-dev/pytest/issues/12367): Fix a regression in pytest 8.2.0 where unittest class instances (a fresh one is created for each test) were not released promptly on test teardown but only on session teardown. - [#12381](https://togithub.com/pytest-dev/pytest/issues/12381): Fix possible "Directory not empty" crashes arising from concurent cache dir (`.pytest_cache`) creation. Regressed in pytest 8.2.0. ## Improved Documentation - [#12290](https://togithub.com/pytest-dev/pytest/issues/12290): Updated Sphinx theme to use Furo instead of Flask, enabling Dark mode theme. - [#12356](https://togithub.com/pytest-dev/pytest/issues/12356): Added a subsection to the documentation for debugging flaky tests to mention lack of thread safety in pytest as a possible source of flakyness. - [#12363](https://togithub.com/pytest-dev/pytest/issues/12363): The documentation webpages now links to a canonical version to reduce outdated documentation in search engine results. ### [`v8.2.1`](https://togithub.com/pytest-dev/pytest/releases/tag/8.2.1) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.2.0...8.2.1) # pytest 8.2.1 (2024-05-19) ## Improvements - [#12334](https://togithub.com/pytest-dev/pytest/issues/12334): Support for Python 3.13 (beta1 at the time of writing). ## Bug Fixes - [#12120](https://togithub.com/pytest-dev/pytest/issues/12120): Fix \[PermissionError]{.title-ref} crashes arising from directories which are not selected on the command-line. - [#12191](https://togithub.com/pytest-dev/pytest/issues/12191): Keyboard interrupts and system exits are now properly handled during the test collection. - [#12300](https://togithub.com/pytest-dev/pytest/issues/12300): Fixed handling of 'Function not implemented' error under squashfuse_ll, which is a different way to say that the mountpoint is read-only. - [#12308](https://togithub.com/pytest-dev/pytest/issues/12308): Fix a regression in pytest 8.2.0 where the permissions of automatically-created `.pytest_cache` directories became `rwx------` instead of the expected `rwxr-xr-x`. ## Trivial/Internal Changes - [#12333](https://togithub.com/pytest-dev/pytest/issues/12333): pytest releases are now attested using the recent [Artifact Attestation](https://github.blog/2024-05-02-introducing-artifact-attestations-now-in-public-beta/) support from GitHub, allowing users to verify the provenance of pytest's sdist and wheel artifacts. ### [`v8.2.0`](https://togithub.com/pytest-dev/pytest/releases/tag/8.2.0) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.1.2...8.2.0) # pytest 8.2.0 (2024-04-27) ## Deprecations - [#12069](https://togithub.com/pytest-dev/pytest/issues/12069): A deprecation warning is now raised when implementations of one of the following hooks request a deprecated `py.path.local` parameter instead of the `pathlib.Path` parameter which replaced it: - `pytest_ignore_collect`{.interpreted-text role="hook"} - the `path` parameter - use `collection_path` instead. - `pytest_collect_file`{.interpreted-text role="hook"} - the `path` parameter - use `file_path` instead. - `pytest_pycollect_makemodule`{.interpreted-text role="hook"} - the `path` parameter - use `module_path` instead. - `pytest_report_header`{.interpreted-text role="hook"} - the `startdir` parameter - use `start_path` instead. - `pytest_report_collectionfinish`{.interpreted-text role="hook"} - the `startdir` parameter - use `start_path` instead. The replacement parameters are available since pytest 7.0.0. The old parameters will be removed in pytest 9.0.0. See `legacy-path-hooks-deprecated`{.interpreted-text role="ref"} for more details. ## Features - [#11871](https://togithub.com/pytest-dev/pytest/issues/11871): Added support for reading command line arguments from a file using the prefix character `@`, like e.g.: `pytest @tests.txt`. The file must have one argument per line. See `Read arguments from file <args-from-file>`{.interpreted-text role="ref"} for details. ## Improvements - [#11523](https://togithub.com/pytest-dev/pytest/issues/11523): `pytest.importorskip`{.interpreted-text role="func"} will now issue a warning if the module could be found, but raised `ImportError`{.interpreted-text role="class"} instead of `ModuleNotFoundError`{.interpreted-text role="class"}. The warning can be suppressed by passing `exc_type=ImportError` to `pytest.importorskip`{.interpreted-text role="func"}. See `import-or-skip-import-error`{.interpreted-text role="ref"} for details. - [#11728](https://togithub.com/pytest-dev/pytest/issues/11728): For `unittest`-based tests, exceptions during class cleanup (as raised by functions registered with `TestCase.addClassCleanup <unittest.TestCase.addClassCleanup>`{.interpreted-text role="meth"}) are now reported instead of silently failing. - [#11777](https://togithub.com/pytest-dev/pytest/issues/11777): Text is no longer truncated in the `short test summary info` section when `-vv` is given. - [#12112](https://togithub.com/pytest-dev/pytest/issues/12112): Improved namespace packages detection when `consider_namespace_packages`{.interpreted-text role="confval"} is enabled, covering more situations (like editable installs). - [#9502](https://togithub.com/pytest-dev/pytest/issues/9502): Added `PYTEST_VERSION`{.interpreted-text role="envvar"} environment variable which is defined at the start of the pytest session and undefined afterwards. It contains the value of `pytest.__version__`, and among other things can be used to easily check if code is running from within a pytest run. ## Bug Fixes - [#12065](https://togithub.com/pytest-dev/pytest/issues/12065): Fixed a regression in pytest 8.0.0 where test classes containing `setup_method` and tests using `@staticmethod` or `@classmethod` would crash with `AttributeError: 'NoneType' object has no attribute 'setup_method'`. Now the `request.instance <pytest.FixtureRequest.instance>`{.interpreted-text role="attr"} attribute of tests using `@staticmethod` and `@classmethod` is no longer `None`, but a fresh instance of the class, like in non-static methods. Previously it was `None`, and all fixtures of such tests would share a single `self`. - [#12135](https://togithub.com/pytest-dev/pytest/issues/12135): Fixed issue where fixtures adding their finalizer multiple times to fixtures they request would cause unreliable and non-intuitive teardown ordering in some instances. - [#12194](https://togithub.com/pytest-dev/pytest/issues/12194): Fixed a bug with `--importmode=importlib` and `--doctest-modules` where child modules did not appear as attributes in parent modules. - [#1489](https://togithub.com/pytest-dev/pytest/issues/1489): Fixed some instances where teardown of higher-scoped fixtures was not happening in the reverse order they were initialized in. ## Trivial/Internal Changes - [#12069](https://togithub.com/pytest-dev/pytest/issues/12069): `pluggy>=1.5.0` is now required. - [#12167](https://togithub.com/pytest-dev/pytest/issues/12167): `cache <cache>`{.interpreted-text role="ref"}: create supporting files (`CACHEDIR.TAG`, `.gitignore`, etc.) in a temporary directory to provide atomic semantics. ### [`v8.1.2`](https://togithub.com/pytest-dev/pytest/releases/tag/8.1.2) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.1.1...8.1.2) # pytest 8.1.2 (2024-04-26) ## Bug Fixes - [#12114](https://togithub.com/pytest-dev/pytest/issues/12114): Fixed error in `pytest.approx`{.interpreted-text role="func"} when used with \[numpy]{.title-ref} arrays and comparing with other types. ### [`v8.1.1`](https://togithub.com/pytest-dev/pytest/releases/tag/8.1.1) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.1.0...8.1.1) # pytest 8.1.1 (2024-03-08) ::: {.note} ::: {.title} Note ::: This release is not a usual bug fix release -- it contains features and improvements, being a follow up to `8.1.0`, which has been yanked from PyPI. ::: ## Features - [#11475](https://togithub.com/pytest-dev/pytest/issues/11475): Added the new `consider_namespace_packages`{.interpreted-text role="confval"} configuration option, defaulting to `False`. If set to `True`, pytest will attempt to identify modules that are part of [namespace packages](https://packaging.python.org/en/latest/guides/packaging-namespace-packages) when importing modules. - [#11653](https://togithub.com/pytest-dev/pytest/issues/11653): Added the new `verbosity_test_cases`{.interpreted-text role="confval"} configuration option for fine-grained control of test execution verbosity. See `Fine-grained verbosity <pytest.fine_grained_verbosity>`{.interpreted-text role="ref"} for more details. ## Improvements - [#10865](https://togithub.com/pytest-dev/pytest/issues/10865): `pytest.warns`{.interpreted-text role="func"} now validates that `warnings.warn`{.interpreted-text role="func"} was called with a \[str]{.title-ref} or a \[Warning]{.title-ref}. Currently in Python it is possible to use other types, however this causes an exception when `warnings.filterwarnings`{.interpreted-text role="func"} is used to filter those warnings (see [CPython #103577](https://togithub.com/python/cpython/issues/103577) for a discussion). While this can be considered a bug in CPython, we decided to put guards in pytest as the error message produced without this check in place is confusing. - [#11311](https://togithub.com/pytest-dev/pytest/issues/11311): When using `--override-ini` for paths in invocations without a configuration file defined, the current working directory is used as the relative directory. Previoulsy this would raise an `AssertionError`{.interpreted-text role="class"}. - [#11475](https://togithub.com/pytest-dev/pytest/issues/11475): `--import-mode=importlib <import-mode-importlib>`{.interpreted-text role="ref"} now tries to import modules using the standard import mechanism (but still without changing :py`sys.path`{.interpreted-text role="data"}), falling back to importing modules directly only if that fails. This means that installed packages will be imported under their canonical name if possible first, for example `app.core.models`, instead of having the module name always be derived from their path (for example `.env310.lib.site_packages.app.core.models`). - [#11801](https://togithub.com/pytest-dev/pytest/issues/11801): Added the `iter_parents() <_pytest.nodes.Node.iter_parents>`{.interpreted-text role="func"} helper method on nodes. It is similar to `listchain <_pytest.nodes.Node.listchain>`{.interpreted-text role="func"}, but goes from bottom to top, and returns an iterator, not a list. - [#11850](https://togithub.com/pytest-dev/pytest/issues/11850): Added support for `sys.last_exc`{.interpreted-text role="data"} for post-mortem debugging on Python>=3.12. - [#11962](https://togithub.com/pytest-dev/pytest/issues/11962): In case no other suitable candidates for configuration file are found, a `pyproject.toml` (even without a `[tool.pytest.ini_options]` table) will be considered as the configuration file and define the `rootdir`. - [#11978](https://togithub.com/pytest-dev/pytest/issues/11978): Add `--log-file-mode` option to the logging plugin, enabling appending to log-files. This option accepts either `"w"` or `"a"` and defaults to `"w"`. Previously, the mode was hard-coded to be `"w"` which truncates the file before logging. - [#12047](https://togithub.com/pytest-dev/pytest/issues/12047): When multiple finalizers of a fixture raise an exception, now all exceptions are reported as an exception group. Previously, only the first exception was reported. ## Bug Fixes - [#11475](https://togithub.com/pytest-dev/pytest/issues/11475): Fixed regression where `--importmode=importlib` would import non-test modules more than once. - [#11904](https://togithub.com/pytest-dev/pytest/issues/11904): Fixed a regression in pytest 8.0.0 that would cause test collection to fail due to permission errors when using `--pyargs`. This change improves the collection tree for tests specified using `--pyargs`, see `12043`{.interpreted-text role="pull"} for a comparison with pytest 8.0 and <8. - [#12011](https://togithub.com/pytest-dev/pytest/issues/12011): Fixed a regression in 8.0.1 whereby `setup_module` xunit-style fixtures are not executed when `--doctest-modules` is passed. - [#12014](https://togithub.com/pytest-dev/pytest/issues/12014): Fix the `stacklevel` used when warning about marks used on fixtures. - [#12039](https://togithub.com/pytest-dev/pytest/issues/12039): Fixed a regression in `8.0.2` where tests created using `tmp_path`{.interpreted-text role="fixture"} have been collected multiple times in CI under Windows. ## Improved Documentation - [#11790](https://togithub.com/pytest-dev/pytest/issues/11790): Documented the retention of temporary directories created using the `tmp_path` fixture in more detail. ## Trivial/Internal Changes - [#11785](https://togithub.com/pytest-dev/pytest/issues/11785): Some changes were made to private functions which may affect plugins which access them: - `FixtureManager._getautousenames()` now takes a `Node` itself instead of the nodeid. - `FixtureManager.getfixturedefs()` now takes the `Node` itself instead of the nodeid. - The `_pytest.nodes.iterparentnodeids()` function is removed without replacement. Prefer to traverse the node hierarchy itself instead. If you really need to, copy the function from the previous pytest release. - [#12069](https://togithub.com/pytest-dev/pytest/issues/12069): Delayed the deprecation of the following features to `9.0.0`: - `node-ctor-fspath-deprecation`{.interpreted-text role="ref"}. - `legacy-path-hooks-deprecated`{.interpreted-text role="ref"}. It was discovered after `8.1.0` was released that the warnings about the impeding removal were not being displayed, so the team decided to revert the removal. This is the reason for `8.1.0` being yanked. # pytest 8.1.0 (YANKED) ::: {.note} ::: {.title} Note ::: This release has been **yanked**: it broke some plugins without the proper warning period, due to some warnings not showing up as expected. See [#12069](https://togithub.com/pytest-dev/pytest/issues/12069). ::: ### [`v8.1.0`](https://togithub.com/pytest-dev/pytest/releases/tag/8.1.0) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.0.2...8.1.0) # pytest 8.1.0 (YANKED) > \[!IMPORTANT]\ > This release has been **yanked**: it broke some plugins without the proper warning period, due to some warnings not showing up as expected. See [#12069](https://togithub.com/pytest-dev/pytest/issues/12069). ## Features - [#11475](https://togithub.com/pytest-dev/pytest/issues/11475): Added the new `consider_namespace_packages`{.interpreted-text role="confval"} configuration option, defaulting to `False`. If set to `True`, pytest will attempt to identify modules that are part of [namespace packages](https://packaging.python.org/en/latest/guides/packaging-namespace-packages) when importing modules. - [#11653](https://togithub.com/pytest-dev/pytest/issues/11653): Added the new `verbosity_test_cases`{.interpreted-text role="confval"} configuration option for fine-grained control of test execution verbosity. See `Fine-grained verbosity <pytest.fine_grained_verbosity>`{.interpreted-text role="ref"} for more details. ## Improvements - [#10865](https://togithub.com/pytest-dev/pytest/issues/10865): `pytest.warns`{.interpreted-text role="func"} now validates that `warnings.warn`{.interpreted-text role="func"} was called with a \[str]{.title-ref} or a \[Warning]{.title-ref}. Currently in Python it is possible to use other types, however this causes an exception when `warnings.filterwarnings`{.interpreted-text role="func"} is used to filter those warnings (see [CPython #103577](https://togithub.com/python/cpython/issues/103577) for a discussion). While this can be considered a bug in CPython, we decided to put guards in pytest as the error message produced without this check in place is confusing. - [#11311](https://togithub.com/pytest-dev/pytest/issues/11311): When using `--override-ini` for paths in invocations without a configuration file defined, the current working directory is used as the relative directory. Previoulsy this would raise an `AssertionError`{.interpreted-text role="class"}. - [#11475](https://togithub.com/pytest-dev/pytest/issues/11475): `--import-mode=importlib <import-mode-importlib>`{.interpreted-text role="ref"} now tries to import modules using the standard import mechanism (but still without changing :py`sys.path`{.interpreted-text role="data"}), falling back to importing modules directly only if that fails. This means that installed packages will be imported under their canonical name if possible first, for example `app.core.models`, instead of having the module name always be derived from their path (for example `.env310.lib.site_packages.app.core.models`). - [#11801](https://togithub.com/pytest-dev/pytest/issues/11801): Added the `iter_parents() <_pytest.nodes.Node.iter_parents>`{.interpreted-text role="func"} helper method on nodes. It is similar to `listchain <_pytest.nodes.Node.listchain>`{.interpreted-text role="func"}, but goes from bottom to top, and returns an iterator, not a list. - [#11850](https://togithub.com/pytest-dev/pytest/issues/11850): Added support for `sys.last_exc`{.interpreted-text role="data"} for post-mortem debugging on Python>=3.12. - [#11962](https://togithub.com/pytest-dev/pytest/issues/11962): In case no other suitable candidates for configuration file are found, a `pyproject.toml` (even without a `[tool.pytest.ini_options]` table) will be considered as the configuration file and define the `rootdir`. - [#11978](https://togithub.com/pytest-dev/pytest/issues/11978): Add `--log-file-mode` option to the logging plugin, enabling appending to log-files. This option accepts either `"w"` or `"a"` and defaults to `"w"`. Previously, the mode was hard-coded to be `"w"` which truncates the file before logging. - [#12047](https://togithub.com/pytest-dev/pytest/issues/12047): When multiple finalizers of a fixture raise an exception, now all exceptions are reported as an exception group. Previously, only the first exception was reported. ## Bug Fixes - [#11904](https://togithub.com/pytest-dev/pytest/issues/11904): Fixed a regression in pytest 8.0.0 that would cause test collection to fail due to permission errors when using `--pyargs`. This change improves the collection tree for tests specified using `--pyargs`, see `12043`{.interpreted-text role="pull"} for a comparison with pytest 8.0 and <8. - [#12011](https://togithub.com/pytest-dev/pytest/issues/12011): Fixed a regression in 8.0.1 whereby `setup_module` xunit-style fixtures are not executed when `--doctest-modules` is passed. - [#12014](https://togithub.com/pytest-dev/pytest/issues/12014): Fix the `stacklevel` used when warning about marks used on fixtures. - [#12039](https://togithub.com/pytest-dev/pytest/issues/12039): Fixed a regression in `8.0.2` where tests created using `tmp_path`{.interpreted-text role="fixture"} have been collected multiple times in CI under Windows. ## Improved Documentation - [#11790](https://togithub.com/pytest-dev/pytest/issues/11790): Documented the retention of temporary directories created using the `tmp_path` fixture in more detail. ## Trivial/Internal Changes - [#11785](https://togithub.com/pytest-dev/pytest/issues/11785): Some changes were made to private functions which may affect plugins which access them: - `FixtureManager._getautousenames()` now takes a `Node` itself instead of the nodeid. - `FixtureManager.getfixturedefs()` now takes the `Node` itself instead of the nodeid. - The `_pytest.nodes.iterparentnodeids()` function is removed without replacement. Prefer to traverse the node hierarchy itself instead. If you really need to, copy the function from the previous pytest release. ### [`v8.0.2`](https://togithub.com/pytest-dev/pytest/releases/tag/8.0.2) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.0.1...8.0.2) # pytest 8.0.2 (2024-02-24) ## Bug Fixes - [#11895](https://togithub.com/pytest-dev/pytest/issues/11895): Fix collection on Windows where initial paths contain the short version of a path (for example `c:\PROGRA~1\tests`). - [#11953](https://togithub.com/pytest-dev/pytest/issues/11953): Fix an `IndexError` crash raising from `getstatementrange_ast`. - [#12021](https://togithub.com/pytest-dev/pytest/issues/12021): Reverted a fix to \[--maxfail]{.title-ref} handling in pytest 8.0.0 because it caused a regression in pytest-xdist whereby session fixture teardowns may get executed multiple times when the max-fails is reached. ### [`v8.0.1`](https://togithub.com/pytest-dev/pytest/releases/tag/8.0.1) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/8.0.0...8.0.1) # pytest 8.0.1 (2024-02-16) ## Bug Fixes - [#11875](https://togithub.com/pytest-dev/pytest/issues/11875): Correctly handle errors from `getpass.getuser`{.interpreted-text role="func"} in Python 3.13. - [#11879](https://togithub.com/pytest-dev/pytest/issues/11879): Fix an edge case where `ExceptionInfo._stringify_exception` could crash `pytest.raises`{.interpreted-text role="func"}. - [#11906](https://togithub.com/pytest-dev/pytest/issues/11906): Fix regression with `pytest.warns`{.interpreted-text role="func"} using custom warning subclasses which have more than one parameter in their \[\__init\_\_]{.title-ref}. - [#11907](https://togithub.com/pytest-dev/pytest/issues/11907): Fix a regression in pytest 8.0.0 whereby calling `pytest.skip`{.interpreted-text role="func"} and similar control-flow exceptions within a `pytest.warns()`{.interpreted-text role="func"} block would get suppressed instead of propagating. - [#11929](https://togithub.com/pytest-dev/pytest/issues/11929): Fix a regression in pytest 8.0.0 whereby autouse fixtures defined in a module get ignored by the doctests in the module. - [#11937](https://togithub.com/pytest-dev/pytest/issues/11937): Fix a regression in pytest 8.0.0 whereby items would be collected in reverse order in some circumstances. ### [`v8.0.0`](https://togithub.com/pytest-dev/pytest/releases/tag/8.0.0): pytest 8.0.0 (2024-01-27) [Compare Source](https://togithub.com/pytest-dev/pytest/compare/7.4.4...8.0.0) See [8.0.0rc1](https://togithub.com/pytest-dev/pytest/releases/tag/8.0.0rc1) and [8.0.0rc2](https://togithub.com/pytest-dev/pytest/releases/tag/8.0.0rc2) for the full changes since pytest 7.4! #### Bug Fixes - [#11842](https://togithub.com/pytest-dev/pytest/issues/11842): Properly escape the `reason` of a `skip <pytest.mark.skip ref>`{.interpreted-text role="ref"} mark when writing JUnit XML files. - [#11861](https://togithub.com/pytest-dev/pytest/issues/11861): Avoid microsecond exceeds `1_000_000` when using `log-date-format` with `%f` specifier, which might cause the test suite to crash. </details> <details> <summary>pytest-dev/pytest-cov (pytest-cov)</summary> ### [`v5.0.0`](https://togithub.com/pytest-dev/pytest-cov/blob/HEAD/CHANGELOG.rst#500-2024-03-24) [Compare Source](https://togithub.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0) - Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in `#623 <https://github.com/pytest-dev/pytest-cov/pull/623>`\_. - Switched docs theme to Furo. - Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in `#630 <https://github.com/pytest-dev/pytest-cov/pull/630>`*, `#631 <https://github.com/pytest-dev/pytest-cov/pull/631>`*, `#632 <https://github.com/pytest-dev/pytest-cov/pull/632>`\_ and `#633 <https://github.com/pytest-dev/pytest-cov/pull/633>`\_. - Added a `pyproject.toml` example in the docs. Contributed by Dawn James in `#626 <https://github.com/pytest-dev/pytest-cov/pull/626>`\_. - Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in `#584 <https://github.com/pytest-dev/pytest-cov/pull/584>`\_. </details> --- ### Configuration 📅 **Schedule**: Branch creation - "after 1am and before 3am every weekday" in timezone Etc/UTC, Automerge - At any time (no schedule defined). 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox. 👻 **Immortal**: This PR will be recreated if closed unmerged. Get [config help](https://togithub.com/renovatebot/renovate/discussions) if that's undesired. --- - [ ] If you want to rebase/retry this PR, check this box --- This PR has been generated by [Mend Renovate](https://www.mend.io/free-developer-tools/renovate/). View repository job log [here](https://developer.mend.io/github/canonical/mysql-router-operator).  --------- Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> Co-authored-by: Carl Csaposs <[email protected]>

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 4.1.0 to 5.0.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=4.1.0&new-version=5.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

This PR contains the following updates: | Package | Change | Age | Adoption | Passing | Confidence | |---|---|---|---|---|---| | [pytest-cov](https://redirect.github.com/pytest-dev/pytest-cov) ([changelog](https://pytest-cov.readthedocs.io/en/latest/changelog.html)) | `~=4.1` -> `~=5.0` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | --- ### Release Notes <details> <summary>pytest-dev/pytest-cov (pytest-cov)</summary> ### [`v5.0.0`](https://redirect.github.com/pytest-dev/pytest-cov/blob/HEAD/CHANGELOG.rst#500-2024-03-24) [Compare Source](https://redirect.github.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0) - Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in `#623 <https://github.com/pytest-dev/pytest-cov/pull/623>`\_. - Switched docs theme to Furo. - Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in `#630 <https://github.com/pytest-dev/pytest-cov/pull/630>`*, `#631 <https://github.com/pytest-dev/pytest-cov/pull/631>`*, `#632 <https://github.com/pytest-dev/pytest-cov/pull/632>`\_ and `#633 <https://github.com/pytest-dev/pytest-cov/pull/633>`\_. - Added a `pyproject.toml` example in the docs. Contributed by Dawn James in `#626 <https://github.com/pytest-dev/pytest-cov/pull/626>`\_. - Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in `#584 <https://github.com/pytest-dev/pytest-cov/pull/584>`\_. </details> --- ### Configuration 📅 **Schedule**: Branch creation - "every weekend" in timezone Etc/UTC, Automerge - At any time (no schedule defined). 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox. 🔕 **Ignore**: Close this PR and you won't be reminded about this update again. --- - [ ] If you want to rebase/retry this PR, check this box --- This PR was generated by [Mend Renovate](https://mend.io/renovate/). View the [repository job log](https://developer.mend.io/github/canonical/craftcraft).  Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

This PR contains the following updates: | Package | Change | Age | Adoption | Passing | Confidence | |---|---|---|---|---|---| | [black](https://redirect.github.com/psf/black) ([changelog](https://redirect.github.com/psf/black/blob/main/CHANGES.md)) | `^23.7.0` -> `^24.0.0` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/black/24.8.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/black/24.8.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/black/23.12.1/24.8.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/black/23.12.1/24.8.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | | [pytest](https://redirect.github.com/pytest-dev/pytest) ([changelog](https://docs.pytest.org/en/stable/changelog.html)) | `^7.4.0` -> `^8.0.0` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/pytest/8.3.3?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/pytest/8.3.3?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/pytest/7.4.4/8.3.3?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/pytest/7.4.4/8.3.3?slim=true)](https://docs.renovatebot.com/merge-confidence/) | | [pytest-cov](https://redirect.github.com/pytest-dev/pytest-cov) ([changelog](https://pytest-cov.readthedocs.io/en/latest/changelog.html)) | `^4.1.0` -> `^5.0.0` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/pytest-cov/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/pytest-cov/4.1.0/5.0.0?slim=true)](https://docs.renovatebot.com/merge-confidence/) | | [safety](https://redirect.github.com/pyupio/safety) | `^2.3.5` -> `^3.0.0` | [![age](https://developer.mend.io/api/mc/badges/age/pypi/safety/3.2.7?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![adoption](https://developer.mend.io/api/mc/badges/adoption/pypi/safety/3.2.7?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![passing](https://developer.mend.io/api/mc/badges/compatibility/pypi/safety/2.4.0b2/3.2.7?slim=true)](https://docs.renovatebot.com/merge-confidence/) | [![confidence](https://developer.mend.io/api/mc/badges/confidence/pypi/safety/2.4.0b2/3.2.7?slim=true)](https://docs.renovatebot.com/merge-confidence/) | --- ### Release Notes <details> <summary>psf/black (black)</summary> ### [`v24.8.0`](https://redirect.github.com/psf/black/blob/HEAD/CHANGES.md#2480) [Compare Source](https://redirect.github.com/psf/black/compare/24.4.2...24.8.0) ##### Stable style - Fix crash when `# fmt: off` is used before a closing parenthesis or bracket. ([#4363](https://redirect.github.com/psf/black/issues/4363)) ##### Packaging - Packaging metadata updated: docs are explictly linked, the issue tracker is now also linked. This improves the PyPI listing for Black. ([#4345](https://redirect.github.com/psf/black/issues/4345)) ##### Parser - Fix regression where Black failed to parse a multiline f-string containing another multiline string ([#4339](https://redirect.github.com/psf/black/issues/4339)) - Fix regression where Black failed to parse an escaped single quote inside an f-string ([#4401](https://redirect.github.com/psf/black/issues/4401)) - Fix bug with Black incorrectly parsing empty lines with a backslash ([#4343](https://redirect.github.com/psf/black/issues/4343)) - Fix bugs with Black's tokenizer not handling `\{` inside f-strings very well ([#4422](https://redirect.github.com/psf/black/issues/4422)) - Fix incorrect line numbers in the tokenizer for certain tokens within f-strings ([#4423](https://redirect.github.com/psf/black/issues/4423)) ##### Performance - Improve performance when a large directory is listed in `.gitignore` ([#4415](https://redirect.github.com/psf/black/issues/4415)) ##### *Blackd* - Fix blackd (and all extras installs) for docker container ([#4357](https://redirect.github.com/psf/black/issues/4357)) ### [`v24.4.2`](https://redirect.github.com/psf/black/blob/HEAD/CHANGES.md#2442) [Compare Source](https://redirect.github.com/psf/black/compare/24.4.1...24.4.2) This is a bugfix release to fix two regressions in the new f-string parser introduced in 24.4.1. ##### Parser - Fix regression where certain complex f-strings failed to parse ([#4332](https://redirect.github.com/psf/black/issues/4332)) ##### Performance - Fix bad performance on certain complex string literals ([#4331](https://redirect.github.com/psf/black/issues/4331)) ### [`v24.4.1`](https://redirect.github.com/psf/black/blob/HEAD/CHANGES.md#2441) [Compare Source](https://redirect.github.com/psf/black/compare/24.4.0...24.4.1) ##### Highlights - Add support for the new Python 3.12 f-string syntax introduced by PEP 701 ([#3822](https://redirect.github.com/psf/black/issues/3822)) ##### Stable style - Fix crash involving indented dummy functions containing newlines ([#4318](https://redirect.github.com/psf/black/issues/4318)) ##### Parser - Add support for type parameter defaults, a new syntactic feature added to Python 3.13 by PEP 696 ([#4327](https://redirect.github.com/psf/black/issues/4327)) ##### Integrations - Github Action now works even when `git archive` is skipped ([#4313](https://redirect.github.com/psf/black/issues/4313)) ### [`v24.4.0`](https://redirect.github.com/psf/black/blob/HEAD/CHANGES.md#2440) [Compare Source](https://redirect.github.com/psf/black/compare/24.3.0...24.4.0) ##### Stable style - Fix unwanted crashes caused by AST equivalency check ([#4290](https://redirect.github.com/psf/black/issues/4290)) ##### Preview style - `if` guards in `case` blocks are now wrapped in parentheses when the line is too long. ([#4269](https://redirect.github.com/psf/black/issues/4269)) - Stop moving multiline strings to a new line unless inside brackets ([#4289](https://redirect.github.com/psf/black/issues/4289)) ##### Integrations - Add a new option `use_pyproject` to the GitHub Action `psf/black`. This will read the Black version from `pyproject.toml`. ([#4294](https://redirect.github.com/psf/black/issues/4294)) ### [`v24.3.0`](https://redirect.github.com/psf/black/blob/HEAD/CHANGES.md#2430) [Compare Source](https://redirect.github.com/psf/black/compare/24.2.0...24.3.0) ##### Highlights This release is a milestone: it fixes Black's first CVE security vulnerability. If you run Black on untrusted input, or if you habitually put thousands of leading tab characters in your docstrings, you are strongly encouraged to upgrade immediately to fix [CVE-2024-21503](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-21503). This release also fixes a bug in Black's AST safety check that allowed Black to make incorrect changes to certain f-strings that are valid in Python 3.12 and higher. ##### Stable style - Don't move comments along with delimiters, which could cause crashes ([#4248](https://redirect.github.com/psf/black/issues/4248)) - Strengthen AST safety check to catch more unsafe changes to strings. Previous versions of Black would incorrectly format the contents of certain unusual f-strings containing nested strings with the same quote type. Now, Black will crash on such strings until support for the new f-string syntax is implemented. ([#4270](https://redirect.github.com/psf/black/issues/4270)) - Fix a bug where line-ranges exceeding the last code line would not work as expected ([#4273](https://redirect.github.com/psf/black/issues/4273)) ##### Performance - Fix catastrophic performance on docstrings that contain large numbers of leading tab characters. This fixes [CVE-2024-21503](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-21503). ([#4278](https://redirect.github.com/psf/black/issues/4278)) ##### Documentation - Note what happens when `--check` is used with `--quiet` ([#4236](https://redirect.github.com/psf/black/issues/4236)) ### [`v24.2.0`](https://redirect.github.com/psf/black/blob/HEAD/CHANGES.md#2420) [Compare Source](https://redirect.github.com/psf/black/compare/24.1.1...24.2.0) ##### Stable style - Fixed a bug where comments where mistakenly removed along with redundant parentheses ([#4218](https://redirect.github.com/psf/black/issues/4218)) ##### Preview style - Move the `hug_parens_with_braces_and_square_brackets` feature to the unstable style due to an outstanding crash and proposed formatting tweaks ([#4198](https://redirect.github.com/psf/black/issues/4198)) - Fixed a bug where base expressions caused inconsistent formatting of \*\* in tenary expression ([#4154](https://redirect.github.com/psf/black/issues/4154)) - Checking for newline before adding one on docstring that is almost at the line limit ([#4185](https://redirect.github.com/psf/black/issues/4185)) - Remove redundant parentheses in `case` statement `if` guards ([#4214](https://redirect.github.com/psf/black/issues/4214)). ##### Configuration - Fix issue where *Black* would ignore input files in the presence of symlinks ([#4222](https://redirect.github.com/psf/black/issues/4222)) - *Black* now ignores `pyproject.toml` that is missing a `tool.black` section when discovering project root and configuration. Since *Black* continues to use version control as an indicator of project root, this is expected to primarily change behavior for users in a monorepo setup (desirably). If you wish to preserve previous behavior, simply add an empty `[tool.black]` to the previously discovered `pyproject.toml` ([#4204](https://redirect.github.com/psf/black/issues/4204)) ##### Output - Black will swallow any `SyntaxWarning`s or `DeprecationWarning`s produced by the `ast` module when performing equivalence checks ([#4189](https://redirect.github.com/psf/black/issues/4189)) ##### Integrations - Add a JSONSchema and provide a validate-pyproject entry-point ([#4181](https://redirect.github.com/psf/black/issues/4181)) ### [`v24.1.1`](https://redirect.github.com/psf/black/blob/HEAD/CHANGES.md#2411) [Compare Source](https://redirect.github.com/psf/black/compare/24.1.0...24.1.1) Bugfix release to fix a bug that made Black unusable on certain file systems with strict limits on path length. ##### Preview style - Consistently add trailing comma on typed parameters ([#4164](https://redirect.github.com/psf/black/issues/4164)) ##### Configuration - Shorten the length of the name of the cache file to fix crashes on file systems that do not support long paths ([#4176](https://redirect.github.com/psf/black/issues/4176)) ### [`v24.1.0`](https://redirect.github.com/psf/black/blob/HEAD/CHANGES.md#2410) [Compare Source](https://redirect.github.com/psf/black/compare/23.12.1...24.1.0) ##### Highlights This release introduces the new 2024 stable style ([#4106](https://redirect.github.com/psf/black/issues/4106)), stabilizing the following changes: - Add parentheses around `if`-`else` expressions ([#2278](https://redirect.github.com/psf/black/issues/2278)) - Dummy class and function implementations consisting only of `...` are formatted more compactly ([#3796](https://redirect.github.com/psf/black/issues/3796)) - If an assignment statement is too long, we now prefer splitting on the right-hand side ([#3368](https://redirect.github.com/psf/black/issues/3368)) - Hex codes in Unicode escape sequences are now standardized to lowercase ([#2916](https://redirect.github.com/psf/black/issues/2916)) - Allow empty first lines at the beginning of most blocks ([#3967](https://redirect.github.com/psf/black/issues/3967), [#4061](https://redirect.github.com/psf/black/issues/4061)) - Add parentheses around long type annotations ([#3899](https://redirect.github.com/psf/black/issues/3899)) - Enforce newline after module docstrings ([#3932](https://redirect.github.com/psf/black/issues/3932), [#4028](https://redirect.github.com/psf/black/issues/4028)) - Fix incorrect magic trailing comma handling in return types ([#3916](https://redirect.github.com/psf/black/issues/3916)) - Remove blank lines before class docstrings ([#3692](https://redirect.github.com/psf/black/issues/3692)) - Wrap multiple context managers in parentheses if combined in a single `with` statement ([#3489](https://redirect.github.com/psf/black/issues/3489)) - Fix bug in line length calculations for power operations ([#3942](https://redirect.github.com/psf/black/issues/3942)) - Add trailing commas to collection literals even if there's a comment after the last entry ([#3393](https://redirect.github.com/psf/black/issues/3393)) - When using `--skip-magic-trailing-comma` or `-C`, trailing commas are stripped from subscript expressions with more than 1 element ([#3209](https://redirect.github.com/psf/black/issues/3209)) - Add extra blank lines in stubs in a few cases ([#3564](https://redirect.github.com/psf/black/issues/3564), [#3862](https://redirect.github.com/psf/black/issues/3862)) - Accept raw strings as docstrings ([#3947](https://redirect.github.com/psf/black/issues/3947)) - Split long lines in case blocks ([#4024](https://redirect.github.com/psf/black/issues/4024)) - Stop removing spaces from walrus operators within subscripts ([#3823](https://redirect.github.com/psf/black/issues/3823)) - Fix incorrect formatting of certain async statements ([#3609](https://redirect.github.com/psf/black/issues/3609)) - Allow combining `# fmt: skip` with other comments ([#3959](https://redirect.github.com/psf/black/issues/3959)) There are already a few improvements in the `--preview` style, which are slated for the 2025 stable style. Try them out and [share your feedback](https://redirect.github.com/psf/black/issues). In the past, the preview style has included some features that we were not able to stabilize. This year, we're adding a separate `--unstable` style for features with known problems. Now, the `--preview` style only includes features that we actually expect to make it into next year's stable style. ##### Stable style Several bug fixes were made in features that are moved to the stable style in this release: - Fix comment handling when parenthesising conditional expressions ([#4134](https://redirect.github.com/psf/black/issues/4134)) - Fix bug where spaces were not added around parenthesized walruses in subscripts, unlike other binary operators ([#4109](https://redirect.github.com/psf/black/issues/4109)) - Remove empty lines before docstrings in async functions ([#4132](https://redirect.github.com/psf/black/issues/4132)) - Address a missing case in the change to allow empty lines at the beginning of all blocks, except immediately before a docstring ([#4130](https://redirect.github.com/psf/black/issues/4130)) - For stubs, fix logic to enforce empty line after nested classes with bodies ([#4141](https://redirect.github.com/psf/black/issues/4141)) ##### Preview style - Add `--unstable` style, covering preview features that have known problems that would block them from going into the stable style. Also add the `--enable-unstable-feature` flag; for example, use `--enable-unstable-feature hug_parens_with_braces_and_square_brackets` to apply this preview feature throughout 2024, even if a later Black release downgrades the feature to unstable ([#4096](https://redirect.github.com/psf/black/issues/4096)) - Format module docstrings the same as class and function docstrings ([#4095](https://redirect.github.com/psf/black/issues/4095)) - Fix crash when using a walrus in a dictionary ([#4155](https://redirect.github.com/psf/black/issues/4155)) - Fix unnecessary parentheses when wrapping long dicts ([#4135](https://redirect.github.com/psf/black/issues/4135)) - Stop normalizing spaces before `# fmt: skip` comments ([#4146](https://redirect.github.com/psf/black/issues/4146)) ##### Configuration - Print warning when configuration in `pyproject.toml` contains an invalid key ([#4165](https://redirect.github.com/psf/black/issues/4165)) - Fix symlink handling, properly ignoring symlinks that point outside of root ([#4161](https://redirect.github.com/psf/black/issues/4161)) - Fix cache mtime logic that resulted in false positive cache hits ([#4128](https://redirect.github.com/psf/black/issues/4128)) - Remove the long-deprecated `--experimental-string-processing` flag. This feature can currently be enabled with `--preview --enable-unstable-feature string_processing`. ([#4096](https://redirect.github.com/psf/black/issues/4096)) ##### Integrations - Revert the change to run Black's pre-commit integration only on specific git hooks ([#3940](https://redirect.github.com/psf/black/issues/3940)) for better compatibility with older versions of pre-commit ([#4137](https://redirect.github.com/psf/black/issues/4137)) </details> <details> <summary>pytest-dev/pytest (pytest)</summary> ### [`v8.3.3`](https://redirect.github.com/pytest-dev/pytest/releases/tag/8.3.3) [Compare Source](https://redirect.github.com/pytest-dev/pytest/compare/8.3.2...8.3.3) # pytest 8.3.3 (2024-09-09) ## Bug fixes - [#12446](https://redirect.github.com/pytest-dev/pytest/issues/12446): Avoid calling `@property` (and other instance descriptors) during fixture discovery -- by `asottile`{.interpreted-text role="user"} - [#12659](https://redirect.github.com/pytest-dev/pytest/issues/12659): Fixed the issue of not displaying assertion failure differences when using the parameter `--import-mode=importlib` in pytest>=8.1. - [#12667](https://redirect.github.com/pytest-dev/pytest/issues/12667): Fixed a regression where type change in \[ExceptionInfo.errisinstance]{.title-ref} caused \[mypy]{.title-ref} to fail. - [#12744](https://redirect.github.com/pytest-dev/pytest/issues/12744): Fixed typing compatibility with Python 3.9 or less -- replaced \[typing.Self]{.title-ref} with \[typing_extensions.Self]{.title-ref} -- by `Avasam`{.interpreted-text role="user"} - [#12745](https://redirect.github.com/pytest-dev/pytest/issues/12745): Fixed an issue with backslashes being incorrectly converted in nodeid paths on Windows, ensuring consistent path handling across environments. - [#6682](https://redirect.github.com/pytest-dev/pytest/issues/6682): Fixed bug where the verbosity levels where not being respected when printing the "msg" part of failed assertion (as in `assert condition, msg`). - [#9422](https://redirect.github.com/pytest-dev/pytest/issues/9422): Fix bug where disabling the terminal plugin via `-p no:terminal` would cause crashes related to missing the `verbose` option. \-- by `GTowers1`{.interpreted-text role="user"} ## Improved documentation - [#12663](https://redirect.github.com/pytest-dev/pytest/issues/12663): Clarify that the \[pytest_deselected]{.title-ref} hook should be called from \[pytest_collection_modifyitems]{.title-ref} hook implementations when items are deselected. - [#12678](https://redirect.github.com/pytest-dev/pytest/issues/12678): Remove erroneous quotes from \[tmp_path_retention_policy]{.title-ref} example in docs. ## Miscellaneous internal changes - [#12769](https://redirect.github.com/pytest-dev/pytest/issues/12769): Fix typos discovered by codespell and add codespell to pre-commit hooks. ### [`v8.3.2`](https://redirect.github.com/pytest-dev/pytest/releases/tag/8.3.2) [Compare Source](https://redirect.github.com/pytest-dev/pytest/compare/8.3.1...8.3.2) # pytest 8.3.2 (2024-07-24) ## Bug fixes - [#12652](https://redirect.github.com/pytest-dev/pytest/issues/12652): Resolve regression \[conda]{.title-ref} environments where no longer being automatically detected. \-- by `RonnyPfannschmidt`{.interpreted-text role="user"} ### [`v8.3.1`](https://redirect.github.com/pytest-dev/pytest/releases/tag/8.3.1) [Compare Source](https://redirect.github.com/pytest-dev/pytest/compare/8.3.0...8.3.1) # pytest 8.3.1 (2024-07-20) The 8.3.0 release failed to include the change notes and docs for the release. This patch release remedies this. There are no other changes. ### [`v8.3.0`](https://redirect.github.com/pytest-dev/pytest/compare/8.2.2...8.3.0) [Compare Source](https://redirect.github.com/pytest-dev/pytest/compare/8.2.2...8.3.0) ### [`v8.2.2`](https://redirect.github.com/pytest-dev/pytest/releases/tag/8.2.2) [Compare Source](https://redirect.github.com/pytest-dev/pytest/compare/8.2.1...8.2.2) # pytest 8.2.2 (2024-06-04) ## Bug Fixes - [#12355](https://redirect.github.com/pytest-dev/pytest/issues/12355): Fix possible catastrophic performance slowdown on a certain parametrization pattern involving many higher-scoped parameters. - [#12367](https://redirect.github.com/pytest-dev/pytest/issues/12367): Fix a regression in pytest 8.2.0 where unittest class instances (a fresh one is created for each test) were not released promptly on test teardown but only on session teardown. - [#12381](https://redirect.github.com/pytest-dev/pytest/issues/12381): Fix possible "Directory not empty" crashes arising from concurent cache dir (`.pytest_cache`) creation. Regressed in pytest 8.2.0. ## Improved Documentation - [#12290](https://redirect.github.com/pytest-dev/pytest/issues/12290): Updated Sphinx theme to use Furo instead of Flask, enabling Dark mode theme. - [#12356](https://redirect.github.com/pytest-dev/pytest/issues/12356): Added a subsection to the documentation for debugging flaky tests to mention lack of thread safety in pytest as a possible source of flakyness. - [#12363](https://redirect.github.com/pytest-dev/pytest/issues/12363): The documentation webpages now links to a canonical version to reduce outdated documentation in search engine results. ### [`v8.2.1`](https://redirect.github.com/pytest-dev/pytest/releases/tag/8.2.1) [Compare Source](https://redirect.github.com/pytest-dev/pytest/compare/8.2.0...8.2.1) # pytest 8.2.1 (2024-05-19) ## Improvements - [#12334](https://redirect.github.com/pytest-dev/pytest/issues/12334): Support for Python 3.13 (beta1 at the time of writing). ## Bug Fixes - [#12120](https://redirect.github.com/pytest-dev/pytest/issues/12120): Fix \[PermissionError]{.title-ref} crashes arising from directories which are not selected on the command-line. - [#12191](https://redirect.github.com/pytest-dev/pytest/issues/12191): Keyboard interrupts and system exits are now properly handled during the test collection. - [#12300](https://redirect.github.com/pytest-dev/pytest/issues/12300): Fixed handling of 'Function not implemented' error under squashfuse_ll, which is a different way to say that the mountpoint is read-only. - [#12308](https://redirect.github.com/pytest-dev/pytest/issues/12308): Fix a regression in pytest 8.2.0 where the permissions of automatically-created `.pytest_cache` directories became `rwx------` instead of the expected `rwxr-xr-x`. ## Trivial/Internal Changes - [#12333](https://redirect.github.com/pytest-dev/pytest/issues/12333): pytest releases are now attested using the recent [Artifact Attestation](https://github.blog/2024-05-02-introducing-artifact-attestations-now-in-public-beta/) support from GitHub, allowing users to verify the provenance of pytest's sdist and wheel artifacts. ### [`v8.2.0`](https://redirect.github.com/pytest-dev/pytest/releases/tag/8.2.0) [Compare Source](https://redirect.github.com/pytest-dev/pytest/compare/8.1.2...8.2.0) # pytest 8.2.0 (2024-04-27) ## Deprecations - [#12069](https://redirect.github.com/pytest-dev/pytest/issues/12069): A deprecation warning is now raised when implementations of one of the following hooks request a deprecated `py.path.local` parameter instead of the `pathlib.Path` parameter which replaced it: - `pytest_ignore_collect`{.interpreted-text role="hook"} - the `path` parameter - use `collection_path` instead. - `pytest_collect_file`{.interpreted-text role="hook"} - the `path` parameter - use `file_path` instead. - `pytest_pycollect_makemodule`{.interpreted-text role="hook"} - the `path` parameter - use `module_path` instead. - `pytest_report_header`{.interpreted-text role="hook"} - the `startdir` parameter - use `start_path` instead. - `pytest_report_collectionfinish`{.interpreted-text role="hook"} - the `startdir` parameter - use `start_path` instead. The replacement parameters are available since pytest 7.0.0. The old parameters will be removed in pytest 9.0.0. See `legacy-path-hooks-deprecated`{.interpreted-text role="ref"} for more details. ## Features - [#11871](https://redirect.github.com/pytest-dev/pytest/issues/11871): Added support for reading command line arguments from a file using the prefix character `@`, like e.g.: `pytest @tests.txt`. The file must have one argument per line. See `Read arguments from file <args-from-file>`{.interpreted-text role="ref"} for details. ## Improvements - [#11523](https://redirect.github.com/pytest-dev/pytest/issues/11523): `pytest.importorskip`{.interpreted-text role="func"} will now issue a warning if the module could be found, but raised `ImportError`{.interpreted-text role="class"} instead of `ModuleNotFoundError`{.interpreted-text role="class"}. The warning can be suppressed by passing `exc_type=ImportError` to `pytest.importorskip`{.interpreted-text role="func"}. See `import-or-skip-import-error`{.interpreted-text role="ref"} for details. - [#11728](https://redirect.github.com/pytest-dev/pytest/issues/11728): For `unittest`-based tests, exceptions during class cleanup (as raised by functions registered with `TestCase.addClassCleanup <unittest.TestCase.addClassCleanup>`{.interpreted-text role="meth"}) are now reported instead of silently failing. - [#11777](https://redirect.github.com/pytest-dev/pytest/issues/11777): Text is no longer truncated in the `short test summary info` section when `-vv` is given. - [#12112](https://redirect.github.com/pytest-dev/pytest/issues/12112): Improved namespace packages detection when `consider_namespace_packages`{.interpreted-text role="confval"} is enabled, covering more situations (like editable installs). - [#9502](https://redirect.github.com/pytest-dev/pytest/issues/9502): Added `PYTEST_VERSION`{.interpreted-text role="envvar"} environment variable which is defined at the start of the pytest session and undefined afterwards. It contains the value of `pytest.__version__`, and among other things can be used to easily check if code is running from within a pytest run. ## Bug Fixes - [#12065](https://redirect.github.com/pytest-dev/pytest/issues/12065): Fixed a regression in pytest 8.0.0 where test classes containing `setup_method` and tests using `@staticmethod` or `@classmethod` would crash with `AttributeError: 'NoneType' object has no attribute 'setup_method'`. Now the `request.instance <pytest.FixtureRequest.instance>`{.interpreted-text role="attr"} attribute of tests using `@staticmethod` and `@classmethod` is no longer `None`, but a fresh instance of the class, like in non-static methods. Previously it was `None`, and all fixtures of such tests would share a single `self`. - [#12135](https://redirect.github.com/pytest-dev/pytest/issues/12135): Fixed issue where fixtures adding their finalizer multiple times to fixtures they request would cause unreliable and non-intuitive teardown ordering in some instances. - [#12194](https://redirect.github.com/pytest-dev/pytest/issues/12194): Fixed a bug with `--importmode=importlib` and `--doctest-modules` where child modules did not appear as attributes in parent modules. - [#1489](https://redirect.github.com/pytest-dev/pytest/issues/1489): Fixed some instances where teardown of higher-scoped fixtures was not happening in the reverse order they were initialized in. ## Trivial/Internal Changes - [#12069](https://redirect.github.com/pytest-dev/pytest/issues/12069): `pluggy>=1.5.0` is now required. - [#12167](https://redirect.github.com/pytest-dev/pytest/issues/12167): `cache <cache>`{.interpreted-text role="ref"}: create supporting files (`CACHEDIR.TAG`, `.gitignore`, etc.) in a temporary directory to provide atomic semantics. ### [`v8.1.2`](https://redirect.github.com/pytest-dev/pytest/releases/tag/8.1.2) [Compare Source](https://redirect.github.com/pytest-dev/pytest/compare/8.1.1...8.1.2) # pytest 8.1.2 (2024-04-26) ## Bug Fixes - [#12114](https://redirect.github.com/pytest-dev/pytest/issues/12114): Fixed error in `pytest.approx`{.interpreted-text role="func"} when used with \[numpy]{.title-ref} arrays and comparing with other types. ### [`v8.1.1`](https://redirect.github.com/pytest-dev/pytest/releases/tag/8.1.1) [Compare Source](https://redirect.github.com/pytest-dev/pytest/compare/8.1.0...8.1.1) # pytest 8.1.1 (2024-03-08) ::: {.note} ::: {.title} Note ::: This release is not a usual bug fix release -- it contains features and improvements, being a follow up to `8.1.0`, which has been yanked from PyPI. ::: ## Features - [#11475](https://redirect.github.com/pytest-dev/pytest/issues/11475): Added the new `consider_namespace_packages`{.interpreted-text role="confval"} configuration option, defaulting to `False`. If set to `True`, pytest will attempt to identify modules that are part of [namespace packages](https://packaging.python.org/en/latest/guides/packaging-namespace-packages) when importing modules. - [#11653](https://redirect.github.com/pytest-dev/pytest/issues/11653): Added the new `verbosity_test_cases`{.interpreted-text role="confval"} configuration option for fine-grained control of test execution verbosity. See `Fine-grained verbosity <pytest.fine_grained_verbosity>`{.interpreted-text role="ref"} for more details. ## Improvements - [#10865](https://redirect.github.com/pytest-dev/pytest/issues/10865): `pytest.warns`{.interpreted-text role="func"} now validates that `warnings.warn`{.interpreted-text role="func"} was called with a \[str]{.title-ref} or a \[Warning]{.title-ref}. Currently in Python it is possible to use other types, however this causes an exception when `warnings.filterwarnings`{.interpreted-text role="func"} is used to filter those warnings (see [CPython #103577](https://redirect.github.com/python/cpython/issues/103577) for a discussion). While this can be considered a bug in CPython, we decided to put guards in pytest as the error message produced without this check in place is confusing. - [#11311](https://redirect.github.com/pytest-dev/pytest/issues/11311): When using `--override-ini` for paths in invocations without a configuration file defined, the current working directory is used as the relative directory. Previoulsy this would raise an `AssertionError`{.interpreted-text role="class"}. - [#11475](https://redirect.github.com/pytest-dev/pytest/issues/11475): `--import-mode=importlib <import-mode-importlib>`{.interpreted-text role="ref"} now tries to import modules using the standard import mechanism (but still without changing :py`sys.path`{.interpreted-text role="data"}), falling back to importing modules directly only if that fails. This means that installed packages will be imported under their canonical name if possible first, for example `app.core.models`, instead of having the module name always be derived from their path (for example `.env310.lib.site_packages.app.core.models`). - [#11801](https://redirect.github.com/pytest-dev/pytest/issues/11801): Added the `iter_parents() <_pytest.nodes.Node.iter_parents>`{.interpreted-text role="func"} helper method on nodes. It is similar to `listchain <_pytest.nodes.Node.listchain>`{.interpreted-text role="func"}, but goes from bottom to top, and returns an iterator, not a list. - [#11850](https://redirect.github.com/pytest-dev/pytest/issues/11850): Added support for `sys.last_exc`{.interpreted-text role="data"} for post-mortem debugging on Python>=3.12. - [#11962](https://redirect.github.com/pytest-dev/pytest/issues/11962): In case no other suitable candidates for configuration file are found, a `pyproject.toml` (even without a `[tool.pytest.ini_options]` table) will be considered as the configuration file and define the `rootdir`. - [#11978](https://redirect.github.com/pytest-dev/pytest/issues/11978): Add `--log-file-mode` option to the logging plugin, enabling appending to log-files. This option accepts either `"w"` or `"a"` and defaults to `"w"`. Previously, the mode was hard-coded to be `"w"` which truncates the file before logging. - [#12047](https://redirect.github.com/pytest-dev/pytest/issues/12047): When multiple finalizers of a fixture raise an exception, now all exceptions are reported as an exception group. Previously, only the first exception was reported. ## Bug Fixes - [#11475](https://redirect.github.com/pytest-dev/pytest/issues/11475): Fixed regression where `--importmode=importlib` would import non-test modules more than once. - [#11904](https://redirect.github.com/pytest-dev/pytest/issues/11904): Fixed a regression in pytest 8.0.0 that would cause test collection to fail due to permission errors when using `--pyargs`. This change improves the collection tree for tests specified using `--pyargs`, see `12043`{.interpreted-text role="pull"} for a comparison with pytest 8.0 and <8. - [#12011](https://redirect.github.com/pytest-dev/pytest/issues/12011): Fixed a regression in 8.0.1 whereby `setup_module` xunit-style fixtures are not executed when `--doctest-modules` is passed. - [#12014](https://redirect.github.com/pytest-dev/pytest/issues/12014): Fix the `stacklevel` used when warning about marks used on fixtures. - [#12039](https://redirect.github.com/pytest-dev/pytest/issues/12039): Fixed a regression in `8.0.2` where tests created using `tmp_path`{.interpreted-text role="fixture"} have been collected multiple times in CI under Windows. ## Improved Documentation - [#11790](https://redirect.github.com/pytest-dev/pytest/issues/11790): Documented the retention of temporary directories created using the `tmp_path` fixture in more detail. ## Trivial/Internal Changes - [#11785](https://redirect.github.com/pytest-dev/pytest/issues/11785): Some changes were made to private functions which may affect plugins which access them: - `FixtureManager._getautousenames()` now takes a `Node` itself instead of the nodeid. - `FixtureManager.getfixturedefs()` now takes the `Node` itself instead of the nodeid. - The `_pytest.nodes.iterparentnodeids()` function is removed without replacement. Prefer to traverse the node hierarchy itself instead. If you really need to, copy the function from the previous pytest release. - [#12069](https://redirect.github.com/pytest-dev/pytest/issues/12069): Delayed the deprecation of the following features to `9.0.0`: - `node-ctor-fspath-deprecation`{.interpreted-text role="ref"}. - `legacy-path-hooks-deprecated`{.interpreted-text role="ref"}. It was discovered after `8.1.0` was released that the warnings about the impeding removal were not being displayed, so the team decided to revert the removal. This is the reason for `8.1.0` being yanked. # pytest 8.1.0 (YANKED) ::: {.note} ::: {.title} Note ::: This release has been **yanked**: it broke some plugins without the proper warning period, due to some warnings not showing up as expected. See [#12069](https://redirect.github.com/pytest-dev/pytest/issues/12069). ::: ### [`v8.1.0`](https://redirect.github.com/pytest-dev/pytest/releases/tag/8.1.0) [Compare Source](https://redirect.github.com/pytest-dev/pytest/compare/8.0.2...8.1.0) # pytest 8.1.0 (YANKED) > \[!IMPORTANT]\ > This release has been **yanked**: it broke some plugins without the proper warning period, due to some warnings not showing up as expected. See [#12069](https://redirect.github.com/pytest-dev/pytest/issues/12069). ## Features - [#11475](https://redirect.github.com/pytest-dev/pytest/issues/11475): Added the new `consider_namespace_packages`{.interpreted-text role="confval"} configuration option, defaulting to `False`. If set to `True`, pytest will attempt to identify modules that are part of [namespace packages](https://packaging.python.org/en/latest/guides/packaging-namespace-packages) when importing modules. - [#11653](https://redirect.github.com/pytest-dev/pytest/issues/11653): Added the new `verbosity_test_cases`{.interpreted-text role="confval"} configuration option for fine-grained control of test execution verbosity. See `Fine-grained verbosity <pytest.fine_grained_verbosity>`{.interpreted-text role="ref"} for more details. ## Improvements - [#10865](https://redirect.github.com/pytest-dev/pytest/issues/10865): `pytest.warns`{.interpreted-text role="func"} now validates that `warnings.warn`{.interpreted-text role="func"} was called with a \[str]{.title-ref} or a \[Warning]{.title-ref}. Currently in Python it is possible to use other types, however this causes an exception when `warnings.filterwarnings`{.interpreted-text role="func"} is used to filter those warnings (see [CPython #103577](https://redirect.github.com/python/cpython/issues/103577) for a discussion). While this can be considered a bug in CPython, we decided to put guards in pytest as the error message produced without this check in place is confusing. - [#11311](https://redirect.github.com/pytest-dev/pytest/issues/11311): When using `--override-ini` for paths in invocations without a configuration file defined, the current working directory is used as the relative directory. Previoulsy this would raise an `AssertionError`{.interpreted-text role="class"}. - [#11475](https://redirect.github.com/pytest-dev/pytest/issues/11475): `--import-mode=importlib <import-mode-importlib>`{.interpreted-text role="ref"} now tries to import modules using the standard import mechanism (but still without changing :py`sys.path`{.interpreted-text role="data"}), falling back to importing modules directly only if that fails. This means that installed packages will be imported under their canonical name if possible first, for example `app.core.models`, instead of having the module name always be derived from their path (for example `.env310.lib.site_packages.app.core.models`). - [#11801](https://redirect.github.com/pytest-dev/pytest/issues/11801): Added the `iter_parents() <_pytest.nodes.Node.iter_parents>`{.interpreted-text role="func"} helper method on nodes. It is similar to `listchain <_pytest.nodes.Node.listchain>`{.interpreted-text role="func"}, but goes from bottom to top, and returns an iterator, not a list. - [#11850](https://redirect.github.com/pytest-dev/pytest/issues/11850): Added support for `sys.last_exc`{.interpreted-text role="data"} for post-mortem debugging on Python>=3.12. - [#11962](https://redirect.github.com/pytest-dev/pytest/issues/11962): In case no other suitable candidates for configuration file are found, a `pyproject.toml` (even without a `[tool.pytest.ini_options]` table) will be considered as the configuration file and define the `rootdir`. - [#11978](https://redirect.github.com/pytest-dev/pytest/issues/11978): Add `--log-file-mode` option to the logging plugin, enabling appending to log-files. This option accepts either `"w"` or `"a"` and defaults to `"w"`. Previously, the mode was hard-coded to be `"w"` which truncates the file before logging. - [#12047](https://redirect.github.com/pytest-dev/pytest/issues/12047): When multiple finalizers of a fixture raise an exception, now all exceptions are reported as an exception group. Previously, only the first exception was reported. ## Bug Fixes - [#11904](https://redirect.github.com/pytest-dev/pytest/issues/11904): Fixed a regression in pytest 8.0.0 that would cause test collection to fail due to permission errors when using `--pyargs`. This change improves the collection tree for tests specified using `--pyargs`, see `12043`{.interpreted-text role="pull"} for a comparison with pytest 8.0 and <8. - [#12011](https://redirect.github.com/pytest-dev/pytest/issues/12011): Fixed a regression in 8.0.1 whereby `setup_module` xunit-style fixtures are not executed when `--doctest-modules` is passed. - [#12014](https://redirect.github.com/pytest-dev/pytest/issues/12014): Fix the `stacklevel` used when warning about marks used on fixtures. - [#12039](https://redirect.github.com/pytest-dev/pytest/issues/12039): Fixed a regression in `8.0.2` where tests created using `tmp_path`{.interpreted-text role="fixture"} have been collected multiple times in CI under Windows. ## Improved Documentation - [#11790](https://redirect.github.com/pytest-dev/pytest/issues/11790): Documented the retention of temporary directories created using the `tmp_path` fixture in more detail. ## Trivial/Internal Changes - [#11785](https://redirect.github.com/pytest-dev/pytest/issues/11785): Some changes were made to private functions which may affect plugins which access them: - `FixtureManager._getautousenames()` now takes a `Node` itself instead of the nodeid. - `FixtureManager.getfixturedefs()` now takes the `Node` itself instead of the nodeid. - The `_pytest.nodes.iterparentnodeids()` function is removed without replacement. Prefer to traverse the node hierarchy itself instead. If you really need to, copy the function from the previous pytest release. ### [`v8.0.2`](https://redirect.github.com/pytest-dev/pytest/releases/tag/8.0.2) [Compare Source](https://redirect.github.com/pytest-dev/pytest/compare/8.0.1...8.0.2) # pytest 8.0.2 (2024-02-24) ## Bug Fixes - [#11895](https://redirect.github.com/pytest-dev/pytest/issues/11895): Fix collection on Windows where initial paths contain the short version of a path (for example `c:\PROGRA~1\tests`). - [#11953](https://redirect.github.com/pytest-dev/pytest/issues/11953): Fix an `IndexError` crash raising from `getstatementrange_ast`. - [#12021](https://redirect.github.com/pytest-dev/pytest/issues/12021): Reverted a fix to \[--maxfail]{.title-ref} handling in pytest 8.0.0 because it caused a regression in pytest-xdist whereby session fixture teardowns may get executed multiple times when the max-fails is reached. ### [`v8.0.1`](https://redirect.github.com/pytest-dev/pytest/releases/tag/8.0.1) [Compare Source](https://redirect.github.com/pytest-dev/pytest/compare/8.0.0...8.0.1) # pytest 8.0.1 (2024-02-16) ## Bug Fixes - [#11875](https://redirect.github.com/pytest-dev/pytest/issues/11875): Correctly handle errors from `getpass.getuser`{.interpreted-text role="func"} in Python 3.13. - [#11879](https://redirect.github.com/pytest-dev/pytest/issues/11879): Fix an edge case where `ExceptionInfo._stringify_exception` could crash `pytest.raises`{.interpreted-text role="func"}. - [#11906](https://redirect.github.com/pytest-dev/pytest/issues/11906): Fix regression with `pytest.warns`{.interpreted-text role="func"} using custom warning subclasses which have more than one parameter in their \[\__init\_\_]{.title-ref}. - [#11907](https://redirect.github.com/pytest-dev/pytest/issues/11907): Fix a regression in pytest 8.0.0 whereby calling `pytest.skip`{.interpreted-text role="func"} and similar control-flow exceptions within a `pytest.warns()`{.interpreted-text role="func"} block would get suppressed instead of propagating. - [#11929](https://redirect.github.com/pytest-dev/pytest/issues/11929): Fix a regression in pytest 8.0.0 whereby autouse fixtures defined in a module get ignored by the doctests in the module. - [#11937](https://redirect.github.com/pytest-dev/pytest/issues/11937): Fix a regression in pytest 8.0.0 whereby items would be collected in reverse order in some circumstances. ### [`v8.0.0`](https://redirect.github.com/pytest-dev/pytest/releases/tag/8.0.0): pytest 8.0.0 (2024-01-27) [Compare Source](https://redirect.github.com/pytest-dev/pytest/compare/7.4.4...8.0.0) See [8.0.0rc1](https://redirect.github.com/pytest-dev/pytest/releases/tag/8.0.0rc1) and [8.0.0rc2](https://redirect.github.com/pytest-dev/pytest/releases/tag/8.0.0rc2) for the full changes since pytest 7.4! #### Bug Fixes - [#11842](https://redirect.github.com/pytest-dev/pytest/issues/11842): Properly escape the `reason` of a `skip <pytest.mark.skip ref>`{.interpreted-text role="ref"} mark when writing JUnit XML files. - [#11861](https://redirect.github.com/pytest-dev/pytest/issues/11861): Avoid microsecond exceeds `1_000_000` when using `log-date-format` with `%f` specifier, which might cause the test suite to crash. </details> <details> <summary>pytest-dev/pytest-cov (pytest-cov)</summary> ### [`v5.0.0`](https://redirect.github.com/pytest-dev/pytest-cov/blob/HEAD/CHANGELOG.rst#500-2024-03-24) [Compare Source](https://redirect.github.com/pytest-dev/pytest-cov/compare/v4.1.0...v5.0.0) - Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in `#623 <https://github.com/pytest-dev/pytest-cov/pull/623>`\_. - Switched docs theme to Furo. - Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in `#630 <https://github.com/pytest-dev/pytest-cov/pull/630>`*, `#631 <https://github.com/pytest-dev/pytest-cov/pull/631>`*, `#632 <https://github.com/pytest-dev/pytest-cov/pull/632>`\_ and `#633 <https://github.com/pytest-dev/pytest-cov/pull/633>`\_. - Added a `pyproject.toml` example in the docs. Contributed by Dawn James in `#626 <https://github.com/pytest-dev/pytest-cov/pull/626>`\_. - Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in `#584 <https://github.com/pytest-dev/pytest-cov/pull/584>`\_. </details> <details> <summary>pyupio/safety (safety)</summary> ### [`v3.2.7`](https://redirect.github.com/pyupio/safety/blob/HEAD/CHANGELOG.md#327---2024-08-29) [Compare Source](https://redirect.github.com/pyupio/safety/compare/3.2.6...3.2.7) - fix/increase-auth-timeout: increase timeout to 5s ([#583](https://redirect.github.com/pyupio/safety/issues/583)) - Update Issue Templates: Add Feature Request Template and Improve Issue Submission Process ([#580](https://redirect.github.com/pyupio/safety/issues/580)) ### [`v3.2.6`](https://redirect.github.com/pyupio/safety/blob/HEAD/CHANGELOG.md#326---2024-08-21) [Compare Source](https://redirect.github.com/pyupio/safety/compare/3.2.5...3.2.6) - fix/update-schemas-0-0-4 ([#581](https://redirect.github.com/pyupio/safety/issues/581)) - chore/update-coc-email ([#579](https://redirect.github.com/pyupio/safety/issues/579)) - docs(contributing): add CONTRIBUTING.md with guidelines for contributors ([#571](https://redirect.github.com/pyupio/safety/issues/571)) - chore: update-network-url ([#569](https://redirect.github.com/pyupio/safety/issues/569)) ### [`v3.2.5`](https://redirect.github.com/pyupio/safety/blob/HEAD/CHANGELOG.md#325---2024-08-09) [Compare Source](https://redirect.github.com/pyupio/safety/compare/3.2.4...3.2.5) - fix: increment schemas version ([#567](https://redirect.github.com/pyupio/safety/issues/567)) - Add SLA Document ([#565](https://redirect.github.com/pyupio/safety/issues/565)) - Add Table of Contents to README.md ([#564](https://redirect.github.com/pyupio/safety/issues/564)) - docs: code of conduct ([#559](https://redirect.github.com/pyupio/safety/issues/559)) - Add More Badges ([#558](https://redirect.github.com/pyupio/safety/issues/558)) - feat: fixed issue responder ([#561](https://redirect.github.com/pyupio/safety/issues/561)) - feat(logger): config.ini, proxy, network stats ([#547](https://redirect.github.com/pyupio/safety/issues/547)) - refactor: replace private typer functions with rich module equivalents ([#556](https://redirect.github.com/pyupio/safety/issues/556)) - feat(safety_cli): docstrings, type hints, comments ([#549](https://redirect.github.com/pyupio/safety/issues/549)) - feat: add GitHub Action to automatically respond to new issues ([#554](https://redirect.github.com/pyupio/safety/issues/554)) - readme: add download badge to readme ([#557](https://redirect.github.com/pyupio/safety/issues/557)) - fix(debug): fix --debug flag and associated tests ([#552](https://redirect.github.com/pyupio/safety/issues/552)) - chore: release 3.2.4 ([#545](https://redirect.github.com/pyupio/safety/issues/545)) - fix(cache): handle get_from_cache=None and ensure directory exists ([#544](https://redirect.github.com/pyupio/safety/issues/544)) - REQUEST_TIMEOUT Env Var ([#541](https://redirect.github.com/pyupio/safety/issues/541)) - Update URLs, Lint ([#540](https://redirect.github.com/pyupio/safety/issues/540)) ### [`v3.2.4`](https://redirect.github.com/pyupio/safety/blob/HEAD/CHANGELOG.md#324---2024-07-04) [Compare Source](https://redirect.github.com/pyupio/safety/compare/3.2.3...3.2.4) - Handle `get_from_cache=None` and ensure directory exists ([#538](https://redirect.github.com/pyupio/safety/issues/538)) - Switch filelock package to compatible release clause ([#538](https://redirect.github.com/pyupio/safety/issues/538)) - Add filelock to `install_requires` ([#538](https://redirect.github.com/pyupio/safety/issues/538)) ### [`v3.2.3`](https://redirect.github.com/pyupio/safety/blob/HEAD/CHANGELOG.md#323---2024-06-10) [Compare Source](https://redirect.github.com/pyupio/safety/compare/3.2.2...3.2.3) - Increase request timeout to 30 seconds ([#535](https://redirect.github.com/pyupio/safety/issues/535)) - fix: fail on none severities ([#534](https://redirect.github.com/pyupio/safety/issues/534)) ### [`v3.2.2`](https://redirect.github.com/pyupio/safety/blob/HEAD/CHANGELOG.md#322---2024-06-07) [Compare Source](https://redirect.github.com/pyupio/safety/compare/3.2.1...3.2.2) - fix: include scan template in build ([#531](https://redirect.github.com/pyupio/safety/issues/531)) ### [`v3.2.1`](https://redirect.github.com/pyupio/safety/blob/HEAD/CHANGELOG.md#321---2024-06-04) [Compare Source](https://redirect.github.com/pyupio/safety/compare/3.2.0...3.2.1) - fix: include all templates in the manifest ([#529](https://redirect.github.com/pyupio/safety/issues/529)) - fix: use available email verification claims ([#528](https://redirect.github.com/pyupio/safety/issues/528)) ### [`v3.2.0`](https://redirect.github.com/pyupio/safety/blob/HEAD/CHANGELOG.md#320---2024-05-01) [Compare Source](https://redirect.github.com/pyupio/safety/compare/3.1.0...3.2.0) - feat: add SAFETY_DB_DIR env var to the scan command ([#523](https://redirect.github.com/pyupio/safety/issues/523)) - fix: update pyinstaller target ([#522](https://redirect.github.com/pyupio/safety/issues/522)) - docs: added note on hiring and added careers page link ([#510](https://redirect.github.com/pyupio/safety/issues/510)) ### [`v3.1.0`](https://redirect.github.com/pyupio/safety/blob/HEAD/CHANGELOG.md#310---2024-03-25) [Compare Source](https://redirect.github.com/pyupio/safety/compare/3.0.1...3.1.0) - fix: ensure compatibility with Pydantic version 2.0 ([#509](https://redirect.github.com/pyupio/safety/issues/509)) - feat: introduce --headless flag to enable an alternative login mechanism that bypasses the need for a local web server. ([#508](https://redirect.github.com/pyupio/safety/issues/508)) ### [`v3.0.1`](https://redirect.github.com/pyupio/safety/blob/HEAD/CHANGELOG.md#301---2024-01-19) [Compare Source](https://redirect.github.com/pyupio/safety/compare/3.0.0...3.0.1) - fix: add back the license legacy cmd ([#498](https://redirect.github.com/pyupio/safety/issues/498)) - perf: unpin authlib and remove jwt ### [`v3.0.0`](https://redirect.github.com/pyupio/safety/blob/HEAD/CHANGELOG.md#300---2024-01-17) [Compare Source](https://redirect.github.com/pyupio/safety/compare/2.4.0b2...3.0.0) ##### Safety 3.0.0 major version release! - Safety 3.0.0 is a significant update to Safety CLI from 2.x versions, including enhancements to core features, new capabilities, and breaking changes from 2.x. - See our [Blog article announcing Safety CLI 3](https://safetycli.com/research/safety-cli-3-vulnerability-scanning-for-secure-python-development) for more details on Safety 3 and these changes - See [Migrating from Safety 2.x to Safety CLI 3](https://docs.safetycli.com/safety-docs/safety-cli-3/migrating-from-safety-cli-2.x-to-safety-cli-3.x) for notes and steps to migrating from Safety 2 to Safety 3 ##### Main updates - Added scan command, which scans a project’s directory for all Python dependencies and includes many improvements over the `check` command, including automatic Python project scanning, native support for Poetry and Pipenv files, Python virtual environment folders, and more granular configuration options. - Added auth commands, enabling new browser-based authentication of Safety CLI. - An updated safety policy file schema to support new scan and system-scan commands. This policy file schema is a breaking change from the policy schema used for `safety check`. To migrate a Safety 2.x policy, see [Migrating from Safety 2.x to Safety CLI 3](https://docs.safetycli.com/safety-docs/safety-cli-3/migrating-from-safety-cli-2.x-to-safety-cli-3.x). - Updated screen output to modern interactive interface, with new help interfaces. - Updated to new JSON output structure to support new scan command, other ecosystems, and other security findings. - Added a supporting [safety-schemas project dependency](https://pypi.org/project/safety-schemas/), also published and maintained by Safety, which defines Safety vulnerability database file, Safety CLI policy file, and Safety CLI JSON output schemas as pydantic models, formalizing these into testable and versioned schemas. ##### New scan command: - New scan command: scans a Python project directory for Python dependencies and security vulnerabilities. Safety scan replaces `safety check` with a more powerful and easier to use command. The scan command: - Finds and scans Python dependency files and virtual environments inside the target directory without needing to specify file or environment locations. - Adds native scanning and reporting for Poetry and Pipenv manifest files, and Python virtual environment folders. - Adds configuration of scanning rules to; - exclude files and folders from the scan using Unix shell-style wildcards only - Include files to be scanned - Max folder depth setting - Reporting configuration rules - Reporting rules defining which types and specific vulnerabilities to include or ignore stay the same as safety 2.x, although now in a slightly different structure. - Failing rules - Adds ability to configure rules for when safety should return a non-zero (failing) exit code, which can be different from reporting rules under the `report` field. - Auto-updating rules - Adds ability to easily update insecure package versions in pip requirements files. ##### Other new commands: - Added auth command: manages Safety CLI’s authentication in development environments, allowing easy authentication via the browser. - auth login - adds ability to authenticate safety cli via the browser - auth register - adds ability to register for a Safety account via the CLI, and get scanning within minutes - auth status - - auth logout - - `safety check` command can still be used with the API key --key argument, and scan and system-scan commands should also be - Added configure command: configures safety cli using a config.ini file, either saved to the user settings or system settings. This can be used to configure safety’s authentication methods and global proxy details. - Added system-scan command (beta): Adds the system-scan command, which scans a machine for Python files and environments, reporting these to screen output. system-scan is an experimental beta feature that can scan an entire drive or machine for Python dependency files and Python virtual environments, reporting on packages found and their associated security vulnerabilities. - Added check-updates command: Check for version updates to Safety CLI, and supports screen and JSON format outputs. Can be used in organizations to test and rollout new version updates as recommended by Safety Cybersecurity. ##### New policy file schema for scan and system-scan commands - New policy file schema to support safety scan and safety system-scan. Adds scanning-settings root property, which contains settings to configure rules and settings for how safety traverses the directory and subdirectories being scanned, including “exclude” rules, “include” rules, the max directory depth to scan and which root directories safety system-scan should start from. - Adds report root property, which defi </details> --- ### Configuration 📅 **Schedule**: Branch creation - "on the 2nd and 4th day instance on sunday after 9pm" in timezone America/New_York, Automerge - At any time (no schedule defined). 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever PR is behind base branch, or you tick the rebase/retry checkbox. 👻 **Immortal**: This PR will be recreated if closed unmerged. Get [config help](https://redirect.github.com/renovatebot/renovate/discussions) if that's undesired. --- - [ ] If you want to rebase/retry this PR, check this box --- This PR was generated by [Mend Renovate](https://mend.io/renovate/). View the [repository job log](https://developer.mend.io/github/HHS/simpler-grants-gov).  --------- Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> Co-authored-by: Michael Chouinard <[email protected]>

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 2.10.1 to 5.0.0. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p> <ul> <li> <p><code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_.</p> </li> <li> <p>Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow.</p> <p>There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>::</p> <p>[run] concurrency = multiprocessing</p> </li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v2.10.1...v5.0.0">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pytest-cov&package-manager=pip&previous-version=2.10.1&new-version=5.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p> <ul> <li> <p><code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail Contributed by Zac Hatfield-Dodds in <code>[#511](pytest-dev/pytest-cov#511) <https://github.com/pytest-dev/pytest-cov/pull/511></code>_.</p> </li> <li> <p>Dropped support for multiprocessing (mostly because <code>issue 82408 <https://github.com/python/cpython/issues/82408></code>_). This feature was mostly working but very broken in certain scenarios and made the test suite very flaky and slow.</p> <p>There is builtin multiprocessing support in coverage and you can migrate to that. All you need is this in your <code>.coveragerc</code>::</p> <p>[run] concurrency = multiprocessing</p> </li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/5295ce01c84262cec88f31255e9ac538718f3047"><code>5295ce0</code></a> Bump version: 4.1.0 → 5.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1181b067972bf94569f8011f3b18f271690f9ab1"><code>1181b06</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9757222e2e044361e70125ebdd96e5eb87395983"><code>9757222</code></a> Fix a minor grammar error (<a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/636">#636</a>)</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f5cd81a0dbe3fe41681efdbef516c08988fe8ff"><code>9f5cd81</code></a> Cleanup releasing instructions. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/616">#616</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/93b5047ec5050d63c10a6fe16a09b671a7a03df8"><code>93b5047</code></a> Add test for pyproject.toml loading without explicit --cov-config. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/508">#508</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/ff50860d7c67b920503745d92a3f0944cf41f982"><code>ff50860</code></a> docs: add config instructions for pyproject.toml.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/4a5a4b5fa4b1c63ddcab5cbc1813798c9b6f1d36"><code>4a5a4b5</code></a> Keep GitHub Actions up to date with GitHub's Dependabot</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/1d7f55963d5138f41c452a946f7cca7e0b6ee8b2"><code>1d7f559</code></a> Fix or remove URLs that are causing docs tests to fail</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/6a5af8e85b8242ac815f33e26adf9068f5f0ebc3"><code>6a5af8e</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/d9fe8dfed15023d3410dd299c5092e755b8981c2"><code>d9fe8df</code></a> Switch to furo. Closes <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/618">#618</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.0.0...v5.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

…169) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p> <ul> <li><code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/95404375a0e436178e012e20b8865c23c54c8a50"><code>9540437</code></a> Bump version: 5.0.0 → 6.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f8175467afc67db9001fb364ad1f2dfe79b51f1"><code>9f81754</code></a> Further trim down envs and drop Python 3.8.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b12b5ec65da4c66bbc0c35918957f9f875f465c3"><code>b12b5ec</code></a> Update conf.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/23f4b27b432a54fcc3b6df7363f0e73e568233fb"><code>23f4b27</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/291a04f49566054bb19644aba27c3799ac8b7f42"><code>291a04f</code></a> Bump test deps and trim config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/08f1101455ba293dda388fdb3b61e62fd95a827d"><code>08f1101</code></a> Add <code>--cov-precision</code> option. Close <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/655">#655</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fe2a7e48e5c9c53644994c5ba5a421c84286f5"><code>76fe2a7</code></a> Move the warnings/errors in a place that doesn't import anything.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a9ea7b71711479d4c5ccc5e21e2eb1694b259cb0"><code>a9ea7b7</code></a> Implement error/warning for the bad dynamic_context being set in config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c299e01b6422284a6a7f7322e6b9bf8f44aa3c25"><code>c299e01</code></a> Add explicit suffixing to make it easier to see the identify the sources/usag...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c87e54643ef696ed2b0e2b9a4209581da8467fcb"><code>c87e546</code></a> Add reproducer for weird xdist dynamic_context interaction. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/604">#604</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v5.0.0...v6.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

…52) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p> <ul> <li><code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/95404375a0e436178e012e20b8865c23c54c8a50"><code>9540437</code></a> Bump version: 5.0.0 → 6.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f8175467afc67db9001fb364ad1f2dfe79b51f1"><code>9f81754</code></a> Further trim down envs and drop Python 3.8.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b12b5ec65da4c66bbc0c35918957f9f875f465c3"><code>b12b5ec</code></a> Update conf.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/23f4b27b432a54fcc3b6df7363f0e73e568233fb"><code>23f4b27</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/291a04f49566054bb19644aba27c3799ac8b7f42"><code>291a04f</code></a> Bump test deps and trim config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/08f1101455ba293dda388fdb3b61e62fd95a827d"><code>08f1101</code></a> Add <code>--cov-precision</code> option. Close <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/655">#655</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fe2a7e48e5c9c53644994c5ba5a421c84286f5"><code>76fe2a7</code></a> Move the warnings/errors in a place that doesn't import anything.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a9ea7b71711479d4c5ccc5e21e2eb1694b259cb0"><code>a9ea7b7</code></a> Implement error/warning for the bad dynamic_context being set in config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c299e01b6422284a6a7f7322e6b9bf8f44aa3c25"><code>c299e01</code></a> Add explicit suffixing to make it easier to see the identify the sources/usag...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c87e54643ef696ed2b0e2b9a4209581da8467fcb"><code>c87e546</code></a> Add reproducer for weird xdist dynamic_context interaction. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/604">#604</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v3.0.0...v6.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

…330) Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p> <ul> <li><code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/95404375a0e436178e012e20b8865c23c54c8a50"><code>9540437</code></a> Bump version: 5.0.0 → 6.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f8175467afc67db9001fb364ad1f2dfe79b51f1"><code>9f81754</code></a> Further trim down envs and drop Python 3.8.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b12b5ec65da4c66bbc0c35918957f9f875f465c3"><code>b12b5ec</code></a> Update conf.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/23f4b27b432a54fcc3b6df7363f0e73e568233fb"><code>23f4b27</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/291a04f49566054bb19644aba27c3799ac8b7f42"><code>291a04f</code></a> Bump test deps and trim config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/08f1101455ba293dda388fdb3b61e62fd95a827d"><code>08f1101</code></a> Add <code>--cov-precision</code> option. Close <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/655">#655</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fe2a7e48e5c9c53644994c5ba5a421c84286f5"><code>76fe2a7</code></a> Move the warnings/errors in a place that doesn't import anything.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a9ea7b71711479d4c5ccc5e21e2eb1694b259cb0"><code>a9ea7b7</code></a> Implement error/warning for the bad dynamic_context being set in config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c299e01b6422284a6a7f7322e6b9bf8f44aa3c25"><code>c299e01</code></a> Add explicit suffixing to make it easier to see the identify the sources/usag...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c87e54643ef696ed2b0e2b9a4209581da8467fcb"><code>c87e546</code></a> Add reproducer for weird xdist dynamic_context interaction. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/604">#604</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.0.0...v6.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p> <ul> <li><code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/95404375a0e436178e012e20b8865c23c54c8a50"><code>9540437</code></a> Bump version: 5.0.0 → 6.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f8175467afc67db9001fb364ad1f2dfe79b51f1"><code>9f81754</code></a> Further trim down envs and drop Python 3.8.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b12b5ec65da4c66bbc0c35918957f9f875f465c3"><code>b12b5ec</code></a> Update conf.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/23f4b27b432a54fcc3b6df7363f0e73e568233fb"><code>23f4b27</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/291a04f49566054bb19644aba27c3799ac8b7f42"><code>291a04f</code></a> Bump test deps and trim config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/08f1101455ba293dda388fdb3b61e62fd95a827d"><code>08f1101</code></a> Add <code>--cov-precision</code> option. Close <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/655">#655</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fe2a7e48e5c9c53644994c5ba5a421c84286f5"><code>76fe2a7</code></a> Move the warnings/errors in a place that doesn't import anything.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a9ea7b71711479d4c5ccc5e21e2eb1694b259cb0"><code>a9ea7b7</code></a> Implement error/warning for the bad dynamic_context being set in config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c299e01b6422284a6a7f7322e6b9bf8f44aa3c25"><code>c299e01</code></a> Add explicit suffixing to make it easier to see the identify the sources/usag...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c87e54643ef696ed2b0e2b9a4209581da8467fcb"><code>c87e546</code></a> Add reproducer for weird xdist dynamic_context interaction. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/604">#604</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v5.0.0...v6.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p> <ul> <li><code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/95404375a0e436178e012e20b8865c23c54c8a50"><code>9540437</code></a> Bump version: 5.0.0 → 6.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f8175467afc67db9001fb364ad1f2dfe79b51f1"><code>9f81754</code></a> Further trim down envs and drop Python 3.8.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b12b5ec65da4c66bbc0c35918957f9f875f465c3"><code>b12b5ec</code></a> Update conf.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/23f4b27b432a54fcc3b6df7363f0e73e568233fb"><code>23f4b27</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/291a04f49566054bb19644aba27c3799ac8b7f42"><code>291a04f</code></a> Bump test deps and trim config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/08f1101455ba293dda388fdb3b61e62fd95a827d"><code>08f1101</code></a> Add <code>--cov-precision</code> option. Close <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/655">#655</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fe2a7e48e5c9c53644994c5ba5a421c84286f5"><code>76fe2a7</code></a> Move the warnings/errors in a place that doesn't import anything.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a9ea7b71711479d4c5ccc5e21e2eb1694b259cb0"><code>a9ea7b7</code></a> Implement error/warning for the bad dynamic_context being set in config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c299e01b6422284a6a7f7322e6b9bf8f44aa3c25"><code>c299e01</code></a> Add explicit suffixing to make it easier to see the identify the sources/usag...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c87e54643ef696ed2b0e2b9a4209581da8467fcb"><code>c87e546</code></a> Add reproducer for weird xdist dynamic_context interaction. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/604">#604</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v4.0.0...v6.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Updates the requirements on [pytest-cov](https://github.com/pytest-dev/pytest-cov) to permit the latest version. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst">pytest-cov's changelog</a>.</em></p> <blockquote> <h2>6.0.0 (2024-10-29)</h2> <ul> <li>Updated various documentation inaccuracies, especially on subprocess handling.</li> <li>Changed fail under checks to use the precision set in the coverage configuration. Now it will perform the check just like <code>coverage report</code> would.</li> <li>Added a <code>--cov-precision</code> cli option that can override the value set in your coverage configuration.</li> <li>Dropped support for now EOL Python 3.8.</li> </ul> <h2>5.0.0 (2024-03-24)</h2> <ul> <li>Removed support for xdist rsync (now deprecated). Contributed by Matthias Reichenbach in <code>[#623](pytest-dev/pytest-cov#623) <https://github.com/pytest-dev/pytest-cov/pull/623></code>_.</li> <li>Switched docs theme to Furo.</li> <li>Various legacy Python cleanup and CI improvements. Contributed by Christian Clauss and Hugo van Kemenade in <code>[#630](pytest-dev/pytest-cov#630) <https://github.com/pytest-dev/pytest-cov/pull/630></code><em>, <code>[#631](pytest-dev/pytest-cov#631) <https://github.com/pytest-dev/pytest-cov/pull/631></code></em>, <code>[#632](pytest-dev/pytest-cov#632) <https://github.com/pytest-dev/pytest-cov/pull/632></code>_ and <code>[#633](pytest-dev/pytest-cov#633) <https://github.com/pytest-dev/pytest-cov/pull/633></code>_.</li> <li>Added a <code>pyproject.toml</code> example in the docs. Contributed by Dawn James in <code>[#626](pytest-dev/pytest-cov#626) <https://github.com/pytest-dev/pytest-cov/pull/626></code>_.</li> <li>Modernized project's pre-commit hooks to use ruff. Initial POC contributed by Christian Clauss in <code>[#584](pytest-dev/pytest-cov#584) <https://github.com/pytest-dev/pytest-cov/pull/584></code>_.</li> </ul> <h2>4.1.0 (2023-05-24)</h2> <ul> <li>Updated CI with new Pythons and dependencies.</li> <li>Removed rsyncdir support. This makes pytest-cov compatible with xdist 3.0. Contributed by Sorin Sbarnea in <code>[#558](pytest-dev/pytest-cov#558) <https://github.com/pytest-dev/pytest-cov/pull/558></code>_.</li> <li>Optimized summary generation to not be performed if no reporting is active (for example, when <code>--cov-report=''</code> is used without <code>--cov-fail-under</code>). Contributed by Jonathan Stewmon in <code>[#589](pytest-dev/pytest-cov#589) <https://github.com/pytest-dev/pytest-cov/pull/589></code>_.</li> <li>Added support for JSON reporting. Contributed by Matthew Gamble in <code>[#582](pytest-dev/pytest-cov#582) <https://github.com/pytest-dev/pytest-cov/pull/582></code>_.</li> <li>Refactored code to use f-strings. Contributed by Mark Mayo in <code>[#572](pytest-dev/pytest-cov#572) <https://github.com/pytest-dev/pytest-cov/pull/572></code>_.</li> <li>Fixed a skip in the test suite for some old xdist. Contributed by a bunch of people in <code>[#565](pytest-dev/pytest-cov#565) <https://github.com/pytest-dev/pytest-cov/pull/565></code>_.</li> </ul> <h2>4.0.0 (2022-09-28)</h2> <p><strong>Note that this release drops support for multiprocessing.</strong></p> <ul> <li><code>--cov-fail-under</code> no longer causes <code>pytest --collect-only</code> to fail</li> </ul>  </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/95404375a0e436178e012e20b8865c23c54c8a50"><code>9540437</code></a> Bump version: 5.0.0 → 6.0.0</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/9f8175467afc67db9001fb364ad1f2dfe79b51f1"><code>9f81754</code></a> Further trim down envs and drop Python 3.8.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/b12b5ec65da4c66bbc0c35918957f9f875f465c3"><code>b12b5ec</code></a> Update conf.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/23f4b27b432a54fcc3b6df7363f0e73e568233fb"><code>23f4b27</code></a> Update changelog.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/291a04f49566054bb19644aba27c3799ac8b7f42"><code>291a04f</code></a> Bump test deps and trim config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/08f1101455ba293dda388fdb3b61e62fd95a827d"><code>08f1101</code></a> Add <code>--cov-precision</code> option. Close <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/655">#655</a>.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/76fe2a7e48e5c9c53644994c5ba5a421c84286f5"><code>76fe2a7</code></a> Move the warnings/errors in a place that doesn't import anything.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/a9ea7b71711479d4c5ccc5e21e2eb1694b259cb0"><code>a9ea7b7</code></a> Implement error/warning for the bad dynamic_context being set in config.</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c299e01b6422284a6a7f7322e6b9bf8f44aa3c25"><code>c299e01</code></a> Add explicit suffixing to make it easier to see the identify the sources/usag...</li> <li><a href="https://github.com/pytest-dev/pytest-cov/commit/c87e54643ef696ed2b0e2b9a4209581da8467fcb"><code>c87e546</code></a> Add reproducer for weird xdist dynamic_context interaction. Ref <a href="https://redirect.github.com/pytest-dev/pytest-cov/issues/604">#604</a>.</li> <li>Additional commits viewable in <a href="https://github.com/pytest-dev/pytest-cov/compare/v5.0.0...v6.0.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details>

Pierre-Sassoulas reviewed Feb 28, 2023

View reviewed changes

.pre-commit-config.yaml Outdated Show resolved Hide resolved

Pierre-Sassoulas reviewed Feb 28, 2023

View reviewed changes

.github/workflows/test.yml Outdated Show resolved Hide resolved

Pierre-Sassoulas added the skip-changelog label Feb 28, 2023

pre-commit: Replace flake8, isort, and pyupgrade with ruff

4200898

cclauss force-pushed the ruff branch from 2836c36 to 4200898 Compare February 28, 2023 12:26

cclauss requested a review from Pierre-Sassoulas February 28, 2023 12:43

Pierre-Sassoulas approved these changes Feb 28, 2023

View reviewed changes

ionelmc reviewed Mar 10, 2023

View reviewed changes

.ruff.toml Show resolved Hide resolved

Pierre-Sassoulas mentioned this pull request Mar 10, 2023

PEP 621: Migrate settings from setup.cfg into pyproject.toml #586

Closed

cclauss requested a review from ionelmc March 20, 2023 16:40

cclauss force-pushed the ruff branch from 3fb7443 to d5a6605 Compare March 20, 2023 16:44

Make changes requested in code review

430f0c8

cclauss force-pushed the ruff branch from 7c21db2 to 430f0c8 Compare March 20, 2023 17:38

Add ruff per-file-ignores

469085c

cclauss closed this Mar 20, 2023

cclauss deleted the ruff branch March 20, 2023 17:55

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

pre-commit: Replace flake8, isort, and pyupgrade with ruff #584

pre-commit: Replace flake8, isort, and pyupgrade with ruff #584

cclauss commented Feb 28, 2023 •

edited

Loading

Pierre-Sassoulas commented Feb 28, 2023

RonnyPfannschmidt commented Feb 28, 2023

cclauss commented Feb 28, 2023

ionelmc commented Feb 28, 2023

cclauss commented Feb 28, 2023

Pierre-Sassoulas left a comment

ionelmc commented Mar 10, 2023 •

edited

Loading

cclauss commented Mar 10, 2023 •

edited

Loading

ionelmc Mar 10, 2023

cclauss Mar 10, 2023 •

edited

Loading

ionelmc Mar 10, 2023

cclauss Mar 10, 2023

ionelmc Mar 10, 2023

ionelmc Mar 10, 2023

cclauss Mar 10, 2023

Skylion007 Mar 20, 2023

cclauss Mar 20, 2023

cclauss commented Mar 20, 2023

levrik commented Apr 26, 2024 •

edited

Loading

pre-commit: Replace flake8, isort, and pyupgrade with ruff #584

pre-commit: Replace flake8, isort, and pyupgrade with ruff #584

Conversation

cclauss commented Feb 28, 2023 • edited Loading

Pierre-Sassoulas commented Feb 28, 2023

RonnyPfannschmidt commented Feb 28, 2023

cclauss commented Feb 28, 2023

ionelmc commented Feb 28, 2023

cclauss commented Feb 28, 2023

Pierre-Sassoulas left a comment

Choose a reason for hiding this comment

ionelmc commented Mar 10, 2023 • edited Loading

cclauss commented Mar 10, 2023 • edited Loading

Choose a reason for hiding this comment

cclauss Mar 10, 2023 • edited Loading

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

cclauss commented Mar 20, 2023

levrik commented Apr 26, 2024 • edited Loading

cclauss commented Feb 28, 2023 •

edited

Loading

ionelmc commented Mar 10, 2023 •

edited

Loading

cclauss commented Mar 10, 2023 •

edited

Loading

cclauss Mar 10, 2023 •

edited

Loading

levrik commented Apr 26, 2024 •

edited

Loading