MultiIndex serialization to NetCDF

[tippetts]

For the last remaining item on #719, do you (especially @shoyer and @benbovy ) have any thoughts formed about how the MultiIndex will be represented inside the netCDF4/HDF5 file? And how it will be recognized and reconstructed when read back in?

I am in the process of converting a lot of data with multiIndices into HDF5, which I will want to use xarray for reading later. So I would very much like to do it in a way that will be compatible once xarray has the MultiIndex to/from NetCDF built in. Thanks!

[shoyer]

This is a good question -- I don't think we've figured it out yet. Maybe you have ideas?

The main question (to me) is whether we should store raw values for each level in a MultiIndex (closer to what you see), or category encoded values (closer to the MultiIndex implementation).

To more concrete, here it what these look like for an example MultiIndex:

In [1]: index = pd.MultiIndex.from_product([[1, 2, 3], ['a', 'b']], names=['numbers', 'letters'])

In [2]: index
Out[2]:
MultiIndex(levels=[[1, 2, 3], ['a', 'b']],
           labels=[[0, 0, 1, 1, 2, 2], [0, 1, 0, 1, 0, 1]],
           names=['numbers', 'letters'])

In [3]: index.values
Out[3]: array([(1, 'a'), (1, 'b'), (2, 'a'), (2, 'b'), (3, 'a'), (3, 'b')], dtype=object)

# categorical encoded values
In [4]: index.levels, index.labels
Out[4]:
(FrozenList([[1, 2, 3], ['a', 'b']]),
 FrozenList([[0, 0, 1, 1, 2, 2], [0, 1, 0, 1, 0, 1]]))

# raw values
In [5]: index.get_level_values(0), index.get_level_values(1)
Out[5]:
(Int64Index([1, 1, 2, 2, 3, 3], dtype='int64', name='numbers'),
 Index(['a', 'b', 'a', 'b', 'a', 'b'], dtype='object', name='letters'))

Advantages of storing raw values:

• It's easier to work with MultiIndex levels without xarray, or with older versions of xarray (no need to combine levels and labels).
• Avoiding the overhead of saving integer codes can save memory if levels have dtypes with small fixed sizes (e.g., float, int or datetime) or mostly distinct values.

Advantages of storing category encoded values:

• It's cheaper to construct the MultiIndex, because we have already factorized each level.
• It can result in significant memory savings if levels are mostly duplicated (e.g., a tensor product) or have large itemsize (e.g., long strings).
• We can restore the exact same MultiIndex, instead of refactorizing it. This manifests itself in a few edge cases that could make for a frustrating user experience (changed dimension order after stacking: Unstacking produces flipped array when using decreasing coordinate values #980).

Perhaps the best approach would be a hybrid: store raw values, as well as de-duplicated integer codes specifying the order of values in each MultiIndex level. This will be a little slower than just storing the raw values, but has the correctness guarantee provided by storing category encoded values.

Either way, we will need to store an attribute or two with metadata for how to restore the levels (e.g., 'multiindex_levels: numbers letters').

[tippetts]

Personally I'd vote for the category encoded values. If I make files with a newer xarray, I'll be reading them later with the same (or newer) xarray and I'd definitely want the exact MultiIndex back.

I don't want to be too self-centered in my perspective in all of this. But my applications are definitely in the large-scale scientific computing area that seems to be the community norm for xarray, so I would guess many others would have a similar situation.

I generate data that are associated with nodes or elements in a mesh. The mesh is naturally split into named regions. Sometimes I need to operate on the entire dataset (including all regions) and sometimes I want to select one or more regions. So I make a MultiIndex where the first index is the region name strings, and the second index is the node (or element) number inside the region (i.e. starts over counting from 1 for each region).

So the full index is 1e5 to 1e7 long, of which there are only maybe a few hundred unique values in the string column. I would think that would greatly benefit from the category-encoded storage. And fast and reliable reconstruction of the MultiIndex is a big plus. Does this seem like a common user scenario?

The one thing I'm wondering is, what happens in an application like this if you select on one index (say, all data rows with region_name='FOOBAR-1') from the HDF5 file before doing anything else? Would it hard to make the MultiIndex/NetCDF reader smart enough not to reconstruct the whole MultiIndex before picking out the relevant rows? And, related question for us to think about, how would we make this all play nicely with dask?

Sorry for the long post. I've been very impressed and happy working with xarray, and I'm just eager to get the last bit of features I need so I can really start pushing my colleagues into using it. :)

Nuts and bolts questions: So each of index.levels would be easy to store as its own little DataArray, yeah? Then would each of the index.labels be in its own DataArray, or would you want them all in the same 2D DataArray? And then would the actual data in the original DataArray just have a generic integer index as a placeholder, to be replaced by the MultiIndex?

For these dummy DataArrays and the multiindex_levels metadata attr, how do you feel about using a single leading underscore in the name? If I were to low-level grunge around in the file for some reason, that would indicate to me that they are private-by-convention implementation details.

[shoyer]

Personally I'd vote for the category encoded values. If I make files with a newer xarray, I'll be reading them later with the same (or newer) xarray and I'd definitely want the exact MultiIndex back.

Point taken -- let's see what others think!

One consideration in favor of this is that it will soon be very easy to switch a MultiIndex back into separate coordinate variables, which could be our recommendation for how to save netCDF files for maximum portability.

The one thing I'm wondering is, what happens in an application like this if you select on one index (say, all data rows with region_name='FOOBAR-1') from the HDF5 file before doing anything else? Would it hard to make the MultiIndex/NetCDF reader smart enough not to reconstruct the whole MultiIndex before picking out the relevant rows?

We could do this, but note that we are contemplating switching xarray to always load indexes into memory eagerly, which would negate that advantage. See this PR and mailing list discussion:
#1024 (comment)
https://groups.google.com/forum/#!topic/xarray/dK2RHUls1nQ

Nuts and bolts questions: So each of index.levels would be easy to store as its own little DataArray, yeah? Then would each of the index.labels be in its own DataArray, or would you want them all in the same 2D DataArray?

pandas stores levels separately, automatically putting each of them in the smallest possible dtype (int8, int16, int32 or int64). So we also probably want to store them in separate 1D variables.

And then would the actual data in the original DataArray just have a generic integer index as a placeholder, to be replaced by the MultiIndex?

Just a note: for interacting with backends, we use Variable objects instead of DataArrays:
http://xarray.pydata.org/en/stable/internals.html#variable-objects

This means that we don't need the generic integer placeholder index (which will also be going away shortly in general, see #1017).

[benbovy]

I have the exact same applications than yours @tippetts, but I also would like to write netCDF files that are compatible with other tools than just xarray. With the category encoded values as the default behavior, my concern is that xarray users may be unaware that they generate netCDF files which have limited compatibility with 3rd-party tools, unless a clear warning is given in the documentation.

One consideration in favor of this is that it will soon be very easy to switch a MultiIndex back into separate coordinate variables, which could be our recommendation for how to save netCDF files for maximum portability.

This should be fine, but maybe it would be nice to allow handling this automatically (at read and write) by using a specific encoding attribute? I haven't got much into xarray's IO and serialization logic, so I don't know if it is the right approach. This would be convenient for loading back the generated netCDF files with both xarray and 3rd-party tools, though.

[tippetts]

So if I'm properly understanding and synthesizing your ( @benbovy and @shoyer ) comments: We want the hybrid format for maximum compatibility, with the MultiIndex split into separate 1D raw value coordinates. Using the example above, these would be [1, 1, 2, 2, 3, 3] and ['a', 'b', 'a', 'b', 'a', 'b']. The information about which coordinates are in a MultiIndex (and their order) gets saved in an attribute on the data in the file, like data.attrs['multiindex_levels'] = 'numbers letters'. So 3rd-party tools (or older xarray) will have the non-MultiIndex coords to use, but newer xarray will see the 'multiindex_levels' and automatically reconstruct the MultiIndex when the file is read.

@shoyer , I see what you mean about Variable or future DataArrays not needing a placeholder index. Would that still be backwards-compatible with older xarrays if a saved DataArray has one dim that is a MultiIndex and other dims that are not?

@benbovy , what does the encoding attribute do? It seems to me that, for a DataArray that's already created or loaded, xarray knows about its MultiIndexes and could do the right thing while writing to the backend file without being told to. Are you referring to the metadata in the file (like 'multiindex_levels') that ensures proper interpretation and automatic reconstruction when reading?

[shoyer]

encodings is only in xarray's data model. Everything there gets converted into some detail of how the data is stored in a netcdf file. So I don't think we need to use it here, unless we want options for controlling how the MultiIndex is stored.

[benbovy]

unless we want options for controlling how the MultiIndex is stored.

Yes that's what I mean, something like categories_codes, raw_values and/or hybrid options, though I don't know if using encoding is appropriate here.

Trying to summarize the potential use cases mentioned above:

1. If we're sure that we'll only use xarray (current or newer version) to load back the files, then the categories_codes option is the way to go.
2. If we want to write files that are portable across many other tools than just xarray, then we could use reset_index to manually switch the multi-index back into separate coordinates before writing the file.
3. If we want both 1 and 2, then it would be convenient to have something in xarray that automatically resets / refactorizes the multi-index at writing / loading (this would be the hybrid option).

Note that point 3 is just for more convenience, I wouldn't mind too much having to manually reset / refactorize the multi-index in that case. We indeed don't need options if point 3 is not important.

[tippetts]

Here's a new, related question: @shoyer , do you have any interest in adding a class to xarray that contains a hierarchical tree of Datasets, analogous to the groups in a netCDF or HDF5 file? Then opening or saving such an object would be an easy but powerful one-liner.

Or is that something you would rather leave to someone else's module?

[shoyer]

Maybe? A minimal class for managing groups in an open file could
potentially have synergy with our backends system. Something more than that
is probably out of scope.
On Sat, Nov 12, 2016 at 1:00 PM tippetts [email protected] wrote:

Here's a new, related question: @shoyer https://github.com/shoyer , do
you have any interest in adding a class to xarray that contains a
hierarchical tree of Datasets, analogous to the groups in a netCDF or HDF5
file? Then opening or saving such an object would be an easy but powerful
one-liner.

Or is that something you would rather leave to someone else's module?

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
#1077 (comment), or mute
the thread
https://github.com/notifications/unsubscribe-auth/ABKS1tnZrQ9IuRGuHPNlerQiK7v0-ak8ks5q9ijvgaJpZM4KoZZV
.

[benbovy]

I've started writing a DatasetNode class (WIP):
https://gist.github.com/benbovy/92e7c76220af1aaa4b3a0b65374e233a

Currently, this is a minimal class that just implements an "immutable" tree of datasets (it only allows adding child nodes so that we can build a tree).

[tippetts]

Would it be too simplistic to think that xarray.Dataset (or a subclass of it) could be made to contain other Datasets? That would extend the conceptual map of xarray.Dataset <==> HDF5 group. The contained Datasets would probably also want to have a reference to their parent Dataset, for walking back up the tree.

I think that is similar to what you've done, @benbovy , but with inheritance rather than composition. I understand that is an often disfavored design pattern, but it would it make sense in this case and keep the overall xarray interface simple?

[benbovy]

Yes I'm actually not very happy with the .dataset attribute for accessing the underlying dataset object. On the other hand, similarly to h5py and netCDF4, I find it nice to have dict-like access to other nodes of the tree, e.g., dsnode['../othernode/childnode']. I guess this might co-exist with dict-like access to dataset variables if we ensure that there is no conflict between the names of the child nodes and the names of the dataset variables. Or maybe we can still access a child node that have the same name than a variable by writing dsnode['./name'] instead of dsnode['name']. Conflicts would remain for attribute-style access anyway...

@shoyer do you think that a PR for such a DatasetNode class has any chance of being merged at some point here?

[shoyer]

DatasetNode feels a little too complex to me and disjoint from the rest of the package. I don't know when I would recommend using a DatasetNode to store data.

Also, as written I don't see any aspects that need to live in core xarray -- it seems that it can mostly be done with the external interface. So I would suggest the separate package.

[tippetts]

Yes, I suppose it doesn't really need to live in core xarray, unless you did want to allow a Dataset to contain other Datasets.

@benbovy , do you plan to put your DatasetNode code into some other package?

[mullenkamp]

I would love to have this functionality as well. Unfortunately, I'm not knowledgeable enough to help decide on the internal structure for multiindeces though.

[shoyer]

Let's recap the options, which I'll illustrate for the second level of my MultiIndex from above (#1077 (comment)):

1. "categories and codes": e.g., ['a', 'b'] and [0, 1, 0, 1, 0, 1]. Highest speed, low memory requirements, faithful round-trip to xarray/pandas, less obvious representation.
2. "categories and values": e.g., ['a', 'b'] and ['a', 'b', 'a', 'b', 'a', 'b']. Moderate speed (need recreate codes), high memory requirements, faithful round-trip to xarray/pandas, more obvious representation (categories can be safely ignored).
3. "raw values": e.g., ['a', 'b', 'a', 'b', 'a', 'b']. Moderate speed (only slightly slower than 2), high memory requirements (slightly better than 2), does not support completely faithful roundtrip, most obvious representation.
4. "category codes and values": e.g., [0, 1] and ['a', 'b', 'a', 'b', 'a', 'b']. Moderate speed, high memory requirements, also does not support faithful roundtrip (it's possible for some levels to not be represented in the MultiIndex values), more obvious representation (like 2).

3 uses only slightly less memory than 2 and can be easily achieved with reset_index(), so I don't see a reason to support it for writing (read support would be fine).

4 looks like a faithful roundtrip, but actually isn't in some rare edge cases. That seems like a recipe for disaster, so it should be OK.

This leaves 1 and 2. Both are reasonably performant and roundtrip xarray objects with complete fidelity, so I would be happy with either them. In principle we could even support both, with an argument to switch between the modes (one would need to be the default).

My inclination is start with only supporting 1, because it has a potentially large advantage from a speed/memory perspective, and it's easy to achieve the "raw values" representation with .reset_index() (and convert back with .set_index()). If we do this, the documentation for writing netCDF files should definitely include a suggestion to consider using .reset_index() when distributing files not intended strictly for use by xarray users.

[seth-p]

This code isn't particularly pretty, and I'm not sure if it handles all cases, but it enables serialization of MultiIndex indices by calling ds.mi.encode_multiindices() before serializing and ds.mi.decode_multiindices() after deserializing.

@xr.register_dataset_accessor('mi')
class MiscDatasetAccessor():
    def __init__(self, xarray_obj):
        self._obj = xarray_obj

    def encode_multiindices(self):
        result = self._obj
        for name, index in list(self._obj.indexes.items()):
            if isinstance(index, pd.MultiIndex):
                temp_name = '__' + name
                new_coords = {'{}__{}'.format(temp_name, level_name): level_values.rename(None)
                              for level_name, level_values in zip(index.names, index.levels)}
                new_coords[temp_name] = xr.DataArray(index.labels,
                                                     dims=('{}__names__'.format(temp_name),
                                                           '{}__num__'.format(temp_name)),
                                                     coords={'{}__names__'.format(temp_name): index.names,
                                                             '{}__num__'.format(temp_name): list(range(len(index)))},
                                                     attrs={'__is_multiindex': 1})
                result = result.drop(name).assign_coords(**new_coords)
        return result

    def decode_multiindices(self):
        result = self._obj
        for temp_name, da in list(self._obj.coords.items()):
            if temp_name.startswith('__') and da.attrs.get('__is_multiindex', False):
                name = temp_name[2:]
                level_names = da.coords['{}__names__'.format(temp_name)].values
                levels = [result.coords['{}__{}'.format(temp_name, level_name)].values for level_name in level_names]
                labels = da.values
                result = result.assign_coords(**{name: pd.MultiIndex(levels=levels, labels=labels, names=level_names)})
                result = result.drop(['{}__{}'.format(temp_name, level_name) for level_name in level_names] +
                                     list(da.dims) + [temp_name])
        return result

[kefirbandi]

I now came across this issue, which still seems to be open. Are the statements made earlier still valid? Are there any concrete plans maybe to fix this in the near future?

[shoyer]

Once we finish #1603, that may change our perspective here a little bit (and could indirectly solve this problem).

[dcherian]

This seems to be possible following http://cfconventions.org/Data/cf-conventions/cf-conventions-1.8/cf-conventions.html#compression-by-gathering

Here is a quick proof of concept:

import numpy as np
import pandas as pd
import xarray as xr

# example 1
ds = xr.Dataset(
    {"landsoilt": ("landpoint", np.random.randn(4))},
    {
        "landpoint": pd.MultiIndex.from_product(
            [["a", "b"], [1, 2]], names=("lat", "lon")
        )
    },
)

# example 2
# ds = xr.Dataset(
#     {"landsoilt": ("landpoint", np.random.randn(4))},
#     {
#         "landpoint": pd.MultiIndex.from_arrays(
#             [["a", "b", "c", "d"], [1, 2, 4, 10]], names=("lat", "lon")
#         )
#     },
# )

# encode step
# detect using isinstance(index, pd.MultiIndex) 
idxname = "landpoint"
encoded = ds.reset_index(idxname)
coords = dict(zip(ds.indexes[idxname].names, ds.indexes[idxname].levels))
for coord in coords:
    encoded[coord] = coords[coord].values
shape = [encoded.sizes[coord] for coord in coords]
encoded[idxname] = np.ravel_multi_index(ds.indexes[idxname].codes, shape)
encoded[idxname].attrs["compress"] = " ".join(ds.indexes[idxname].names)

# decode step
# detect using "compress" in var.attrs
idxname = "landpoint"  
names = encoded[idxname].attrs["compress"].split(" ")
shape = [encoded.sizes[dim] for dim in names]
indices = np.unravel_index(encoded.landpoint.values, shape)
arrays = [encoded[dim].values[index] for dim, index in zip(names, indices)]
mindex = pd.MultiIndex.from_arrays(arrays)

decoded = xr.Dataset({}, {idxname: mindex})
decoded["landsoilt"] = (idxname, encoded["landsoilt"].values)

xr.testing.assert_identical(decoded, ds)

encoded can be serialized using our existing code:

<xarray.Dataset>
Dimensions:    (landpoint: 4, lat: 2, lon: 2)
Coordinates:
  * lat        (lat) object 'a' 'b'
  * lon        (lon) int64 1 2
  * landpoint  (landpoint) int64 0 1 2 3
Data variables:
    landsoilt  (landpoint) float64 -1.668 -1.003 1.084 1.963

[fujiisoup]

@dcherian
I think the problem is how to serialize MultiIndex objects rather than the array itself.
In your encoded, how can we tell the MultiIndex is [('a', 1), ('b', 1), ('a', 2), ('b', 2)] or [('a', 1), ('a', 2), ('b', 1), ('b', 2)]?
Maybe we need to store similar objects to landpoint for level variables, such as latpoint and lonpoint.

I think just using reset_index is simpler and easier to restore.

[shoyer]

I agree with @fujiisoup. I think this "compression-by-gathering" representation makes more sense for sparse arrays than for a MultiIndex, per se.

That said, MultiIndex and sparse arrays are basically two sides of the same idea. In the long term, it might make sense to try only support one of the two.

[dcherian]

I may be missing something but @fujiisoup's concern is addressed by the scheme in the CF conventions.

In your encoded, how can we tell the MultiIndex is [('a', 1), ('b', 1), ('a', 2), ('b', 2)] or [('a', 1), ('a', 2), ('b', 1), ('b', 2)]?

The information about ordering is stored as 1D indexes of an ND array; constructed using np.ravel_multi_index in the encode_multiindex function:

encoded[idxname] = np.ravel_multi_index(ds.indexes[idxname].codes, shape)

For example, see the dimension coordinate landpoint in the encoded form

>>> ds3
<xarray.Dataset>
Dimensions:    (landpoint: 4)
Coordinates:
  * landpoint  (landpoint) MultiIndex
  - lat        (landpoint) object 'a' 'b' 'b' 'a'
  - lon        (landpoint) int64 1 2 1 2
Data variables:
    landsoilt  (landpoint) float64 -0.2699 -1.228 0.4632 0.2287

>>> encode_multiindex(ds3, "landpoint")
<xarray.Dataset>
Dimensions:    (landpoint: 4, lat: 2, lon: 2)
Coordinates:
  * lat        (lat) object 'a' 'b'
  * lon        (lon) int64 1 2
  * landpoint  (landpoint) int64 0 3 2 1
Data variables:
    landsoilt  (landpoint) float64 -0.2699 -1.228 0.4632 0.2287

Here is a cleaned up version of the code for easy testing

import numpy as np
import pandas as pd
import xarray as xr


def encode_multiindex(ds, idxname):
    encoded = ds.reset_index(idxname)
    coords = dict(zip(ds.indexes[idxname].names, ds.indexes[idxname].levels))
    for coord in coords:
        encoded[coord] = coords[coord].values
    shape = [encoded.sizes[coord] for coord in coords]
    encoded[idxname] = np.ravel_multi_index(ds.indexes[idxname].codes, shape)
    encoded[idxname].attrs["compress"] = " ".join(ds.indexes[idxname].names)
    return encoded


def decode_to_multiindex(encoded, idxname):
    names = encoded[idxname].attrs["compress"].split(" ")
    shape = [encoded.sizes[dim] for dim in names]
    indices = np.unravel_index(encoded.landpoint.values, shape)
    arrays = [encoded[dim].values[index] for dim, index in zip(names, indices)]
    mindex = pd.MultiIndex.from_arrays(arrays)

    decoded = xr.Dataset({}, {idxname: mindex})
    for varname in encoded.data_vars:
        if idxname in encoded[varname].dims:
            decoded[varname] = (idxname, encoded[varname].values)
    return decoded


ds1 = xr.Dataset(
    {"landsoilt": ("landpoint", np.random.randn(4))},
    {
        "landpoint": pd.MultiIndex.from_product(
            [["a", "b"], [1, 2]], names=("lat", "lon")
        )
    },
)

ds2 = xr.Dataset(
    {"landsoilt": ("landpoint", np.random.randn(4))},
    {
        "landpoint": pd.MultiIndex.from_arrays(
            [["a", "b", "c", "d"], [1, 2, 4, 10]], names=("lat", "lon")
        )
    },
)

ds3 = xr.Dataset(
    {"landsoilt": ("landpoint", np.random.randn(4))},
    {
        "landpoint": pd.MultiIndex.from_arrays(
            [["a", "b", "b", "a"], [1, 2, 1, 2]], names=("lat", "lon")
        )
    },
)


idxname = "landpoint"
for dataset in [ds1, ds2, ds3]:
    xr.testing.assert_identical(
        decode_to_multiindex(encode_multiindex(dataset, idxname), idxname), dataset
    )

[fujiisoup]

@dcherian.
Now I understood.
Your working examples were really nice for me to understand the idea.
Thank you for this clarification.

I think the use of this convention is the best idea to save MultiIndex in netCDF.
Maybe we can start implementing this?

[shoyer]

It still isn't clear to me why this is a better representation for a MultiIndex than a sparse array.

I guess it could work fine for either, but we would need to pick a convention.

[dcherian]

@shoyer I now understand your earlier comment.

I agree that it should work with both sparse and MultiIndex but as such there's no way to decide whether this should be decoded to a sparse array or a MultiIndexed dense array.

Following your comment in #3213 (comment)

Fortunately, there does seems to be a CF convention that would be a good fit for for sparse data in COO format, namely the indexed ragged array representation (example, note the instance_dimension attribute). That's probably the right thing to use for sparse arrays in xarray.

How about using this "compression by gathering" idea for MultiIndexed dense arrays and "indexed ragged arrays" for sparse arrays? I do not know the internals of sparse or the details of the CF conventions to have a strong opinion on which representation to prefer for sparse.COO arrays.

PS: CF convention for "indexed ragged arrays" is here: http://cfconventions.org/cf-conventions/cf-conventions.html#_indexed_ragged_array_representation

[stale]

In order to maintain a list of currently relevant issues, we mark issues as stale after a period of inactivity

If this issue remains relevant, please comment here or remove the stale label; otherwise it will be marked as closed automatically

[dcherian]

I added the "compression by gathering" scheme to cf-xarray.

1. https://cf-xarray.readthedocs.io/en/latest/generated/cf_xarray.encode_multi_index_as_compress.html
2. https://cf-xarray.readthedocs.io/en/latest/generated/cf_xarray.decode_compress_to_multi_index.html

[lucianopaz]

Hi everyone, first of all, thanks for your amazing work! I came across this issue today because I have a dataset with multiple variables and multiple multi index dimensions, some of which aren't used in some variable. I had to slightly adapt the workaround posted by @dcherian to get things to work. I'll post it here if someone else finds the patch useful. I'm not sure if it would be a viable fix for the issue though, let me know if it is and I'll open a PR.

def encode_multiindex(ds, idxname):
    encoded = ds.reset_index(idxname)
    coords = dict(zip(ds.indexes[idxname].names, ds.indexes[idxname].levels))
    for coord in coords:
        encoded[coord] = coords[coord].values
    shape = [encoded.sizes[coord] for coord in coords]
    encoded[idxname] = np.ravel_multi_index(ds.indexes[idxname].codes, shape)
    encoded[idxname].attrs["compress"] = " ".join(ds.indexes[idxname].names)
    return encoded


def decode_to_multiindex(encoded, idxname):
    names = encoded[idxname].attrs["compress"].split(" ")
    shape = [encoded.sizes[dim] for dim in names]
    indices = np.unravel_index(encoded[idxname].values, shape)
    arrays = np.array([encoded[dim].values[index] for dim, index in zip(names, indices)])
    mindex = pd.MultiIndex.from_arrays(arrays, names=names)

    decoded = xr.Dataset(
        {},
        dict(
            **{idxname: mindex},
            **{dim: encoded.coords[dim] for dim in encoded.dims if dim not in [idxname] + names}
        )
    )
    for varname in encoded.data_vars:
        if idxname in encoded[varname].dims:
            decoded[varname] = (encoded[varname].dims, encoded[varname].values)
        else:
            decoded[varname] = encoded[varname]
    return decoded

[dcherian]

Thanks @lucianopaz I fixed some errors when I added it to cf-xarray It would be good to see if that version works for you.

[benbovy]

Should we close this? Now that there is a clear error message redirecting to either .reset_index() (raw level values) or cf-xarray (compression by gathering).

Once we drop the multi-index dimension coordinate, serialization by row level values should just work without explicitly resetting the index.

[dcherian]

I think so. Especially since we are moving away from special casing MultiIndex