2.8.0 profiles

resources/profiles/Anker.ini

@@ -15,7 +15,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Anker/
 [printer_model:M5]
 name = AnkerMake M5
 variants = 0.4
@@ -675,4 +674,4 @@ printer_variant = 0.4
 min_layer_height = 0.08
 max_layer_height = 0.32
 retract_lift_above = 0
-default_print_profile = 0.2 mm OPTIMAL (0.4 mm nozzle) @ANKER
+default_print_profile = 0.2 mm OPTIMAL (0.4 mm nozzle) @ANKER

resources/profiles/Anycubic.ini

@@ -15,7 +15,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Anycubic/
 [printer_model:AKLP]
 name = Anycubic Kossel Linear Plus
 variants = 0.4
@@ -25,7 +24,6 @@ bed_model = AKLP_Bed.stl
 bed_texture = AK.svg
 default_materials = Generic PLA @AKOSSEL; Generic PETG @AKOSSEL; Generic ABS @AKOSSEL
 
-thumbnail = AKLP_thumbnail.png
 [printer_model:AK]
 name = Anycubic Kossel Pulley (Linear)
 variants = 0.4
@@ -35,7 +33,6 @@ bed_model = AK_Bed.stl
 bed_texture = AK.svg
 default_materials = Generic PLA @AKOSSEL; Generic PETG @AKOSSEL; Generic ABS @AKOSSEL
 
-thumbnail = AK_thumbnail.png
 [printer_model:MEGA0]
 name = Anycubic Mega Zero
 variants = 0.4
@@ -45,7 +42,6 @@ bed_model = mega0_bed.stl
 bed_texture = mega0.svg
 default_materials = Generic PLA @MEGA0; Generic PETG @MEGA0; Anycubic PLA @MEGA0; Prusament PLA @MEGA0; Prusament PETG @MEGA0
 
-thumbnail = MEGA0_thumbnail.png
 [printer_model:I3MEGA]
 name = Anycubic i3 Mega
 variants = 0.4
@@ -54,7 +50,6 @@ family = MEGA
 bed_model = i3megas_bed.stl
 bed_texture = i3megas.svg
 
-thumbnail = I3MEGA_thumbnail.png
 [printer_model:I3MEGAS]
 name = Anycubic i3 Mega S
 variants = 0.4
@@ -63,7 +58,6 @@ family = MEGA
 bed_model = i3megas_bed.stl
 bed_texture = i3megas.svg
 
-thumbnail = I3MEGAS_thumbnail.png
 [printer_model:4MAXPRO20]
 name = Anycubic 4Max Pro 2.0
 variants = 0.4
@@ -73,7 +67,6 @@ bed_model = 4MAXPRO20_bed.stl
 bed_texture = 4MAXPRO20_texture.svg
 default_materials = Generic PLA @4Max Pro 2.0; Generic TPU @4Max Pro 2.0; Generic ABS @4Max Pro 2.0
 
-thumbnail = 4MAXPRO20_thumbnail.png
 [printer_model:PREDATOR]
 name = Anycubic Predator
 variants = 0.4; 0.6; 0.8
@@ -89,7 +82,6 @@ default_materials = Generic PLA @PREDATOR; Generic PETG @PREDATOR; Generic ABS @
 ## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/4220
 
 # Common print preset
-thumbnail = PREDATOR_thumbnail.png
 [print:*common_akossel*]
 avoid_crossing_perimeters = 0
 bottom_solid_min_thickness = 0.5
@@ -2325,3 +2317,4 @@ use_volumetric_e = 0
 variable_layer_height = 1
 wipe = 0
 z_offset = 0
+

resources/profiles/AnycubicSLA.ini

@@ -14,31 +14,27 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
-config_url = http://10.24.3.3:8001/v1/repos/non-prusa-sla/AnycubicSLA/
 [printer_model:PHOTON MONO]
 name = Photon Mono
 variants = default
 technology = SLA
 family = PHOTON MONO
 default_materials = Generic Blue Resin @MONO 0.05
 
-thumbnail = PHOTON MONO_thumbnail.png
 [printer_model:PHOTON MONO X]
 name = Photon Mono X
 variants = default
 technology = SLA
 family = PHOTON MONO
 default_materials = Generic Blue Resin @MONO 0.05
 
-thumbnail = PHOTON MONO X_thumbnail.png
 [printer_model:PHOTON MONO X 6K]
 name = Photon Mono X 6K
 variants = default
 technology = SLA
 family = PHOTON MONO
 default_materials = Anycubic Plant-based UV Resin Grey 23 @MONO 0.05
 
-thumbnail = PHOTON MONO X 6K_thumbnail.png
 [printer_model:PHOTON MONO SE]
 name = Photon Mono SE
 variants = default
@@ -48,7 +44,6 @@ default_materials = Generic Blue Resin @MONO 0.05
 
 ## SLA printers
 
-thumbnail = PHOTON MONO SE_thumbnail.png
 [sla_print:*common print ANYCUBIC SLA*]
 compatible_printers_condition = printer_notes=~/.*VENDOR_ANYCUBIC.*/ and printer_notes=~/.*SLA.*/ 
 layer_height = 0.05
@@ -271,3 +266,4 @@ printer_correction = 1,1,1
 gamma_correction = 1
 ; area_fill = 45
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONOX6K\n
+

resources/profiles/Artillery.ini

@@ -26,7 +26,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
 ## PRINTER ##
 #############
 
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/Artillery/
 [printer_model:X1]
 name = Artillery Sidewinder X1
 variants = 0.4
@@ -35,7 +34,6 @@ bed_model = bed-x1.stl
 bed_texture = bed-x1.png
 default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery
 
-thumbnail = X1_thumbnail.png
 [printer_model:Genius]
 name = Artillery Genius
 variants = 0.4
@@ -44,7 +42,6 @@ bed_model = bed-genius.stl
 bed_texture = bed-genius.png
 default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery
 
-thumbnail = Genius_thumbnail.png
 [printer_model:Hornet]
 name = Artillery Hornet
 variants = 0.4
@@ -53,7 +50,6 @@ bed_model = bed-hornet.stl
 bed_texture = bed-hornet.png
 default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery
 
-thumbnail = Hornet_thumbnail.png
 [printer_model:X3 Plus]
 name = Artillery Sidewinder X3 Plus
 variants = 0.4
@@ -62,7 +58,6 @@ bed_model = bed-x3-plus.stl
 bed_texture = bed-x1.png
 default_materials = Artillery ABS @X3; Artillery PETG @X3; Artillery PLA @X3; Artillery PLA HS @X3; Artillery PLA Silk @X3; Artillery TPU @X3
 
-thumbnail = X3 Plus_thumbnail.png
 [printer_model:X3 Pro]
 name = Artillery Sidewinder X3 Pro
 variants = 0.4
@@ -71,7 +66,6 @@ bed_model = bed-x3-pro.stl
 bed_texture = bed-x1.png
 default_materials = Artillery ABS @X3; Artillery PETG @X3; Artillery PLA @X3; Artillery PLA HS @X3; Artillery PLA Silk @X3; Artillery TPU @X3
 
-thumbnail = X3 Pro_thumbnail.png
 [printer_model:X4 Plus]
 name = Artillery Sidewinder X4 Plus
 variants = 0.4
@@ -80,7 +74,6 @@ bed_model = bed-x4-plus.stl
 bed_texture = bed-x1.png
 default_materials = Artillery ABS @X4; Artillery PETG @X4; Artillery PLA & PLA HS @X4; Artillery PLA+ @X4; Artillery PLA Silk @X4; Artillery TPU @X4
 
-thumbnail = X4 Plus_thumbnail.png
 [printer_model:X4 Pro]
 name = Artillery Sidewinder X4 Pro
 variants = 0.4
@@ -89,7 +82,6 @@ bed_model = bed-x4-pro.stl
 bed_texture = bed-x1.png
 default_materials = Artillery ABS @X4; Artillery PETG @X4; Artillery PLA & PLA HS @X4; Artillery PLA+ @X4; Artillery PLA Silk @X4; Artillery TPU @X4
 
-thumbnail = X4 Pro_thumbnail.png
 [printer_model:X4 Max]
 name = Artillery Sidewinder X4 Max
 variants = 0.4
@@ -99,7 +91,6 @@ bed_texture = bed-x1.png
 default_materials = Artillery ABS @X4; Artillery PETG @X4; Artillery PLA & PLA HS @X4; Artillery PLA+ @X4; Artillery PLA Silk @X4; Artillery TPU @X4
 
 # Common printer preset
-thumbnail = X4 Max_thumbnail.png
 [printer:*common*]
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0
 between_objects_gcode = 
@@ -1245,4 +1236,4 @@ filament_retract_length = 1.5
 filament_type = TPU
 first_layer_bed_temperature = 70
 first_layer_temperature = 215
-temperature = 215
+temperature = 215

resources/profiles/BIBO.ini

@@ -14,7 +14,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/BIBO/
 [printer_model:BIBO2]
 name = BIBO2 Touch
 variants = 0.4
@@ -28,7 +27,6 @@ default_materials = Generic PLA @BIBO2; Generic PETG @BIBO2; Generic ABS @BIBO2;
 # not make it into the user interface.
 
 # Common print preset
-thumbnail = BIBO2_thumbnail.png
 [print:*common*]
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
@@ -872,4 +870,4 @@ bed_shape = -33x-93,0x-93,0x93,-33x93
 #bed_texture = BIBO2.svg
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nM104 S{temperature[0]} T0 ; set 1st nozzle heater to print temperature\nG92 E0\n
 start_gcode = ;Start code PrusaSlicer BIBO 2 printers E2 only (i.e. T1)\nM420 S1 ; Turn on Ditto Printing\nG21  ; set units to metric\nG90  ; absolute positioning\nM107 ; start with the fan off\nM140 S{first_layer_bed_temperature[0] - 5} ; set bed temp\nM105 ; Report Temperatures\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to ditto print temperature\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to ditto printing temperature\nM109 S{first_layer_temperature[0]} T1 ; Wait for 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nT0   ; Start at T0 to avoid extruder nozzle offset issues\nG28 X0 Y0  ; move X/Y to min endstops\nG28 Z0     ; move Z to min endstops\nG1 Z2 F400 ; move the print bed down 2mm\nG92 E0.0 ; zero the current extruder coordinate\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nT1 ; switch to tool position T1\nG92 E0.0 ; zero the current extruder coordinate\nM117 E2 nozzle wipe... ; Put Nozzle wipe message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0       ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2     ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0        ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4    ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0       ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6     ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0          ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8      ; draw 4th line\nG92 E0.0 ; reset extruder coordinate to zero before printing\nM117 BIBO Now Printing from E2... ; Put now printing message on screen
-end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0    ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90    ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84    ; Turn steppers off\nM420 S0 ; Turn off Ditto Printing function\nM117 BIBO Print complete ; Put print complete message on screen
+end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0    ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90    ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84    ; Turn steppers off\nM420 S0 ; Turn off Ditto Printing function\nM117 BIBO Print complete ; Put print complete message on screen

resources/profiles/BIQU.ini

@@ -12,7 +12,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/BIQU/
 [printer_model:BIQUBX]
 name = BIQU BX
 variants = 0.4
@@ -25,7 +24,6 @@ default_materials = Generic PLA @BIQU; Generic PETG @BIQU; Generic ABS @BIQU
 # not make it into the user interface.
 
 # Common print preset
-thumbnail = BIQUBX_thumbnail.png
 [print:*common*]
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = monotonic

resources/profiles/CocoaPress.ini

@@ -18,7 +18,6 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.
 
-config_url = https://preset-repo-api.prusa3d.com/v1/repos/non-prusa-fff/CocoaPress/
 [printer_model:Cocoa_Press]
 name = Cocoa Press
 variants = 0.8; 1.6
@@ -601,4 +600,4 @@ printer_model = Cocoa_Press
 [printer:*common*]
 default_filament_profile = "Cocoa Press Chocolates"
 printer_notes = PRINTER_VENDOR_COCOA_PRESS\nPRINTER_MODEL_MINICHEF\nPRINTER_MATERIAL_PASTE\nNO_TEMPLATES
-gcode_flavor = marlin2
+gcode_flavor = marlin2