ESP32: Fixes for README.md

examples/all-clusters-app/esp32/CMakeLists.txt

@@ -19,7 +19,6 @@
 cmake_minimum_required(VERSION 3.5)
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)
 
-# The list of extra component dirs must be in sync with that in all-clusters-app/esp32/Makefile
 set(EXTRA_COMPONENT_DIRS
     "${CMAKE_CURRENT_LIST_DIR}/third_party/connectedhomeip/config/esp32/components"
     "${CMAKE_CURRENT_LIST_DIR}/../../common/m5stack-tft/repo/components"

examples/all-clusters-app/esp32/README.md

@@ -44,7 +44,6 @@ step. To install these components manually, follow these steps:
           $ cd esp-idf
           $ git checkout release/v4.2
           $ git submodule update --init
-          $ export IDF_PATH=${HOME}/tools/esp-idf
           $ ./install.sh
 
 -   Install ninja-build
@@ -93,7 +92,7 @@ that are currently supported include `ESP32-DevKitC` (default),
     before flashing. For ESP32-DevKitC devices this is labeled in the
     [functional description diagram](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/hw-reference/esp32/get-started-devkitc.html#functional-description).
 
-          $ idf.py flash monitor ESPPORT=/dev/tty.SLAB_USBtoUART
+          $ idf.py -p /dev/tty.SLAB_USBtoUART flash monitor
 
     Note: Some users might have to install the
     [VCP driver](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers)
@@ -106,7 +105,7 @@ that are currently supported include `ESP32-DevKitC` (default),
 
 -   If desired, the monitor can be run again like so:
 
-          $ idf.py monitor ESPPORT=/dev/tty.SLAB_USBtoUART
+          $ idf.py -p /dev/tty.SLAB_USBtoUART monitor
 
 ## Commissioning and cluster control
 
@@ -126,7 +125,7 @@ menuconfig).
 2.  Now flash the device with the same command as before. (Use the right `/dev`
     device)
 
-          $ idf.py flash monitor ESPPORT=/dev/tty.SLAB_USBtoUART
+          $ idf.py -p /dev/tty.SLAB_USBtoUART flash monitor
 
 3.  The device should boot up. When device connects to your network, you will
     see a log like this on the device console.
@@ -147,7 +146,7 @@ menuconfig).
 Note: The ESP32 does not support 5GHz networks. Also, the Device will persist
 your network configuration. To erase it, simply run.
 
-          $ idf.py erase_flash ESPPORT=/dev/tty.SLAB_USBtoUART
+          $ idf.py -p /dev/tty.SLAB_USBtoUART erase_flash
 
 ### Setting up Python Controller
 

examples/all-clusters-app/esp32/main/CMakeLists.txt

@@ -16,7 +16,6 @@
 #
 
 # (Uses default behaviour of compiling all source files in directory, adding 'include' to include path.)
-# The list of src and include dirs must be in sync with that in all-clusters-app/esp32/main/component.mk
 idf_component_register(PRIV_INCLUDE_DIRS 
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/examples/all-clusters-app/all-clusters-common"
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/third_party/nlio/repo/include"
@@ -32,6 +31,9 @@ idf_component_register(PRIV_INCLUDE_DIRS
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/on-off-server"
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/level-control"
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/identify"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/account-login-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/application-launcher-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/audio-output-server"
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/barrier-control-server"
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/general-commissioning-server"
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/network-commissioning"
@@ -40,11 +42,15 @@ idf_component_register(PRIV_INCLUDE_DIRS
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/content-launch-server"
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/operational-credentials-server"
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/trusted-root-certificates-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/media-input-server"
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/low-power-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/keypad-input-server"
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/media-playback-server"
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/ota-server"
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/binary-input-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/target-navigator-server"
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/temperature-measurement-server"
+                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/tv-channel-server"
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/scenes"
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/basic"
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/src/app/clusters/bindings"

examples/lock-app/esp32/README.md

@@ -30,7 +30,6 @@ step. To install these components manually, follow these steps:
           $ cd esp-idf
           $ git checkout release/v4.2
           $ git submodule update --init
-          $ export IDF_PATH=${HOME}/tools/esp-idf
           $ ./install.sh
 
 -   Install ninja-build
@@ -79,7 +78,7 @@ make sure the IDF_PATH has been exported(See the manual setup steps above).
     before flashing. For ESP32-DevKitC devices this is labeled in the
     [functional description diagram](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/hw-reference/esp32/get-started-devkitc.html#functional-description).
 
-         $ idf.py flash monitor ESPPORT=/dev/tty.SLAB_USBtoUART
+         $ idf.py -p /dev/tty.SLAB_USBtoUART flash monitor
 
     Note: Some users might have to install the
     [VCP driver](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers)
@@ -92,7 +91,7 @@ make sure the IDF_PATH has been exported(See the manual setup steps above).
 
 -   If desired, the monitor can be run again like so:
 
-          $ idf.py monitor ESPPORT=/dev/tty.SLAB_USBtoUART
+          $ idf.py -p /dev/tty.SLAB_USBtoUART monitor
 
 ## Commissioning and cluster control
 
@@ -112,7 +111,7 @@ menuconfig).
 2.  Now flash the device with the same command as before. (Use the right `/dev`
     device)
 
-          $ idf.py flash monitor ESPPORT=/dev/tty.SLAB_USBtoUART
+          $ idf.py -p /dev/tty.SLAB_USBtoUART flash monitor
 
 3.  The device should boot up. When device connects to your network, you will
     see a log like this on the device console.
@@ -133,7 +132,7 @@ menuconfig).
 Note: The ESP32 does not support 5GHz networks. Also, the Device will persist
 your network configuration. To erase it, simply run.
 
-    $ idf.py erase_flash ESPPORT=/dev/tty.SLAB_USBtoUART
+    $ idf.py -p /dev/tty.SLAB_USBtoUART erase_flash
 
 ### Setting up Python Controller
 

examples/persistent-storage/esp32/CMakeLists.txt

@@ -18,7 +18,6 @@
 cmake_minimum_required(VERSION 3.5)
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)
 
-# The list of extra component dirs must be in sync with that in persistent-storage/esp32/Makefile
 set(EXTRA_COMPONENT_DIRS
     "${CMAKE_CURRENT_LIST_DIR}/third_party/connectedhomeip/config/esp32/components"
 )

examples/persistent-storage/esp32/README.md

@@ -49,7 +49,6 @@ step. To install these components manually, follow these steps:
           $ cd esp-idf
           $ git checkout release/v4.2
           $ git submodule update --init
-          $ export IDF_PATH=${HOME}/tools/esp-idf
           $ ./install.sh
 
 -   Install ninja-build
@@ -98,7 +97,7 @@ make sure the IDF_PATH has been exported(See the manual setup steps above).
     before flashing. For ESP32-DevKitC devices this is labeled in the
     [functional description diagram](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/hw-reference/esp32/get-started-devkitc.html#functional-description).
 
-          $ idf.py flash monitor ESPPORT=/dev/tty.SLAB_USBtoUART
+          $ idf.py -p /dev/tty.SLAB_USBtoUART flash monitor
 
     Note: Some users might have to install the
     [VCP driver](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers)

examples/persistent-storage/esp32/main/CMakeLists.txt

@@ -15,7 +15,6 @@
 #    limitations under the License.
 #
 
-# The list of src and include dirs must be in sync with that in persistent-storage/esp32/main/component.mk
 idf_component_register(PRIV_INCLUDE_DIRS 
                       "${CMAKE_CURRENT_LIST_DIR}"
                       "${CMAKE_SOURCE_DIR}/.."

examples/pigweed-app/esp32/CMakeLists.txt

@@ -19,7 +19,6 @@
 cmake_minimum_required(VERSION 3.5)
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)
 
-# The list of extra component dirs must be in sync with that in pigweed-app/esp32/Makefile
 set(EXTRA_COMPONENT_DIRS
     "${CMAKE_CURRENT_LIST_DIR}/third_party/connectedhomeip/config/esp32/components"
 )

examples/pigweed-app/esp32/README.md

@@ -43,7 +43,6 @@ step. To install these components manually, follow these steps:
           $ cd esp-idf
           $ git checkout release/v4.2
           $ git submodule update --init
-          $ export IDF_PATH=${HOME}/tools/esp-idf
           $ ./install.sh
 
 -   Install ninja-build
@@ -95,7 +94,7 @@ To download and install packages.
     before flashing. For ESP32-DevKitC devices this is labeled in the
     [functional description diagram](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/hw-reference/esp32/get-started-devkitc.html#functional-description).
 
-          $ idf.py build flash ESPPORT=/dev/tty.SLAB_USBtoUART
+          $ idf.py -p /dev/tty.SLAB_USBtoUART build flash
 
     Note: Some users might have to install the
     [VCP driver](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers)

examples/pigweed-app/esp32/main/CMakeLists.txt

@@ -14,7 +14,6 @@
 #    See the License for the specific language governing permissions and
 #    limitations under the License.
 
-# The list of src and include dirs must be in sync with that in pigweed-app/esp32/main/component.mk
 idf_component_register(INCLUDE_DIRS 
                      "${CMAKE_CURRENT_LIST_DIR}"
                      "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/third_party/pigweed/repo/pw_sys_io/public"

examples/temperature-measurement-app/esp32/CMakeLists.txt

@@ -25,7 +25,6 @@ endif()
 
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)
 
-# The list of extra component dirs must be in sync with that in temperature-measurement-app/esp32/Makefile
 set(EXTRA_COMPONENT_DIRS
     "${CMAKE_CURRENT_LIST_DIR}/third_party/connectedhomeip/config/esp32/components"
     "${CMAKE_CURRENT_LIST_DIR}/../../common/m5stack-tft/repo/components"

examples/temperature-measurement-app/esp32/README.md

@@ -30,7 +30,6 @@ step. To install these components manually, follow these steps:
           $ cd esp-idf
           $ git checkout release/v4.2
           $ git submodule update --init
-          $ export IDF_PATH=${HOME}/tools/esp-idf
           $ ./install.sh
 
 -   Install ninja-build
@@ -79,7 +78,7 @@ make sure the IDF_PATH has been exported(See the manual setup steps above).
     before flashing. For ESP32-DevKitC devices this is labeled in the
     [functional description diagram](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/hw-reference/esp32/get-started-devkitc.html#functional-description).
 
-          $ idf.py flash monitor ESPPORT=/dev/tty.SLAB_USBtoUART
+          $ idf.py -p /dev/tty.SLAB_USBtoUART flash monitor
 
     Note: Some users might have to install the
     [VCP driver](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers)
@@ -92,7 +91,7 @@ make sure the IDF_PATH has been exported(See the manual setup steps above).
 
 -   If desired, the monitor can be run again like so:
 
-          $ idf.py monitor ESPPORT=/dev/tty.SLAB_USBtoUART
+          $ idf.py -p /dev/tty.SLAB_USBtoUART monitor
 
 ## Commissioning and cluster control
 
@@ -112,7 +111,7 @@ menuconfig).
 2.  Now flash the device with the same command as before. (Use the right `/dev`
     device)
 
-          $ idf.py flash monitor ESPPORT=/dev/tty.SLAB_USBtoUART
+          $ idf.py -p /dev/tty.SLAB_USBtoUART flash monitor
 
 3.  The device should boot up. When device connects to your network, you will
     see a log like this on the device console.
@@ -133,7 +132,7 @@ menuconfig).
 Note: The ESP32 does not support 5GHz networks. Also, the Device will persist
 your network configuration. To erase it, simply run.
 
-    $ idf.py erase_flash ESPPORT=/dev/tty.SLAB_USBtoUART
+    $ idf.py -p /dev/tty.SLAB_USBtoUART erase_flash
 
 ### Setting up Python Controller
 
@@ -195,5 +194,5 @@ Optimization related to WiFi, BLuetooth, Asserts etc are the part of this
 example by default. To enable this option set is_debug=false from command-line.
 
 ```
-idf.py -Dis_debug=false build flash monitor
+idf.py -p /dev/tty.SLAB_USBtoUART -Dis_debug=false build flash monitor
 ```

examples/temperature-measurement-app/esp32/main/CMakeLists.txt

@@ -16,7 +16,6 @@
 #
 #
 # (Uses default behaviour of compiling all source files in directory, adding 'include' to include path.)
-# The list of src and include dirs must be in sync with that in temperature-measurement-app/esp32/main/component.mk
 idf_component_register(PRIV_INCLUDE_DIRS 
                       "${CMAKE_CURRENT_LIST_DIR}"
                       "${CMAKE_SOURCE_DIR}/third_party/connectedhomeip/third_party/nlio/repo/include"