[Silabs] Refactor Sensor code

examples/platform/silabs/Si70xxSensor.cpp

@@ -0,0 +1,67 @@
+/*
+ *
+ *    Copyright (c) 2020 Project CHIP Authors
+ *    Copyright (c) 2019 Google LLC.
+ *    All rights reserved.
+ *
+ *    Licensed under the Apache License, Version 2.0 (the "License");
+ *    you may not use this file except in compliance with the License.
+ *    You may obtain a copy of the License at
+ *
+ *        http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *    Unless required by applicable law or agreed to in writing, software
+ *    distributed under the License is distributed on an "AS IS" BASIS,
+ *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *    See the License for the specific language governing permissions and
+ *    limitations under the License.
+ */
+
+#include "sl_board_control.h"
+#include "sl_i2cspm_instances.h"
+#include "sl_si70xx.h"
+#include <Si70xxSensor.h>
+#include <lib/support/CodeUtils.h>
+
+namespace {
+
+constexpr uint16_t kSensorTemperatureOffset = 475;
+bool initialized                            = false;
+
+} // namespace
+
+namespace Si70xxSensor {
+
+sl_status_t Init()
+{
+    sl_status_t status = SL_STATUS_OK;
+
+    status = sl_board_enable_sensor(SL_BOARD_SENSOR_RHT);
+    VerifyOrReturnError(status == SL_STATUS_OK, status);
+
+    status = sl_si70xx_init(sl_i2cspm_sensor, SI7021_ADDR);
+    VerifyOrReturnError(status == SL_STATUS_OK, status);
+
+    initialized = true;
+    return status;
+}
+
+sl_status_t GetSensorData(uint16_t & relativeHumidity, int16_t & temperature)
+{
+    VerifyOrReturnError(initialized, SL_STATUS_NOT_INITIALIZED);
+
+    sl_status_t status      = SL_STATUS_OK;
+    int32_t tempTemperature = 0;
+    uint32_t tempHumidity   = 0;
+
+    status = sl_si70xx_measure_rh_and_temp(sl_i2cspm_sensor, SI7021_ADDR, &tempHumidity, &tempTemperature);
+    VerifyOrReturnError(status == SL_STATUS_OK, status);
+
+    // Sensor precision is milliX. We need to reduce to change the precision to centiX to fit with the cluster attributes presicion.
+    temperature      = static_cast<int16_t>(tempTemperature / 10) - kSensorTemperatureOffset;
+    relativeHumidity = static_cast<uint16_t>(tempHumidity / 10);
+
+    return status;
+}
+
+}; // namespace Si70xxSensor

examples/platform/silabs/Si70xxSensor.h

@@ -0,0 +1,48 @@
+/*
+ *
+ *    Copyright (c) 2020 Project CHIP Authors
+ *    Copyright (c) 2019 Google LLC.
+ *    All rights reserved.
+ *
+ *    Licensed under the Apache License, Version 2.0 (the "License");
+ *    you may not use this file except in compliance with the License.
+ *    You may obtain a copy of the License at
+ *
+ *        http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *    Unless required by applicable law or agreed to in writing, software
+ *    distributed under the License is distributed on an "AS IS" BASIS,
+ *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *    See the License for the specific language governing permissions and
+ *    limitations under the License.
+ */
+
+#pragma once
+
+#include "sl_status.h"
+#include <stdint.h>
+
+namespace Si70xxSensor {
+
+/**
+ * @brief Initialises the Si70xx Sensor.
+ *
+ * @return sl_status_t SL_STATUS_OK if there were no errors occured during initialisation.
+ *                     Error if an underlying platform error occured
+ */
+sl_status_t Init();
+
+/**
+ * @brief Reads Humidity and temperature values from the Si70xx sensor.
+ *        The init function must be called before calling the GetSensorData.
+ *
+ * @param[out] relativeHumidity Relative humidity percentage in centi-pourcentage (1000 == 10.00%)
+ * @param[out] temperature Ambiant temperature in centi-celsium (1000 == 10.00C)
+ *
+ * @return sl_status_t SL_STATUS_OK if there were no errors occured during initialisation.
+ *                     SL_STATUS_NOT_INITIALIZED if the sensor was not initialised
+ *                     Error if an underlying platform error occured
+ */
+sl_status_t GetSensorData(uint16_t & relativeHumidity, int16_t & temperature);
+
+}; // namespace Si70xxSensor

examples/platform/silabs/SiWx917/BUILD.gn

@@ -252,6 +252,13 @@ source_set("siwx917-common") {
     public_deps += [ ":test-event-trigger" ]
   }
 
+  if (sl_enable_si70xx_sensor) {
+    sources += [
+      "${silabs_common_plat_dir}/Si70xxSensor.cpp",
+      "${silabs_common_plat_dir}/Si70xxSensor.h",
+    ]
+  }
+
   if (app_data_model != "") {
     public_deps += [ app_data_model ]
   }

examples/platform/silabs/display/demo-ui.c

@@ -167,6 +167,5 @@ void demoUIClearMainScreen(uint8_t * name)
 {
     GLIB_clear(&glibContext);
     demoUIDisplayHeader((char *) name);
-    demoUIDisplayApp(false);
     demoUIDisplayProtocols();
 }

examples/platform/silabs/display/lcd.h

@@ -65,6 +65,7 @@ class SilabsLCD
     int DrawPixel(void * pContext, int32_t x, int32_t y);
     int Update(void);
     void WriteDemoUI(bool state);
+    void WriteDemoUI();
     void SetCustomUI(customUICB cb);
 
     void GetScreen(Screen_e & screen);
@@ -85,8 +86,6 @@ class SilabsLCD
         bool protocol1 = false; /* data */
     } DemoState_t;
 
-    void WriteDemoUI();
-
 #ifdef QR_CODE_ENABLED
     void WriteQRCode();
     void LCDFillRect(uint8_t x, uint8_t y, uint8_t w, uint8_t h);

examples/platform/silabs/efr32/BUILD.gn

@@ -308,6 +308,13 @@ source_set("efr32-common") {
     public_deps += [ ":test-event-trigger" ]
   }
 
+  if (sl_enable_si70xx_sensor) {
+    sources += [
+      "${silabs_common_plat_dir}/Si70xxSensor.cpp",
+      "${silabs_common_plat_dir}/Si70xxSensor.h",
+    ]
+  }
+
   if (app_data_model != "") {
     public_deps += [ app_data_model ]
   }

examples/thermostat/silabs/BUILD.gn

@@ -47,10 +47,6 @@ import("${examples_common_plat_dir}/args.gni")
 declare_args() {
   # Dump memory usage at link time.
   chip_print_memory_usage = false
-
-  # Enable the temperature sensor
-  # Some boards do not have a temperature sensor
-  use_temp_sensor = false
 }
 
 if (wifi_soc) {
@@ -112,19 +108,6 @@ if (wifi_soc) {
         "PW_RPC_ENABLED",
       ]
     }
-
-    if (use_temp_sensor) {
-      include_dirs += [
-        "${efr32_sdk_root}/platform/driver/i2cspm/inc",
-        "${efr32_sdk_root}/app/bluetooth/common/sensor_rht",
-        "${efr32_sdk_root}/app/bluetooth/common/sensor_rht/config",
-        "${efr32_sdk_root}/hardware/driver/si70xx/inc",
-        "${efr32_sdk_root}/app/bluetooth/common/sensor_select",
-        "${efr32_sdk_root}/platform/common/config",
-      ]
-
-      defines += [ "USE_TEMP_SENSOR" ]
-    }
   }
 }
 
@@ -141,17 +124,6 @@ silabs_executable("thermostat_app") {
     "src/ZclCallbacks.cpp",
   ]
 
-  if (use_temp_sensor) {
-    sources += [
-      "${efr32_sdk_root}/hardware/driver/si70xx/src/sl_si70xx.c",
-      "${efr32_sdk_root}/platform/common/src/sl_status.c",
-      "${efr32_sdk_root}/platform/driver/i2cspm/src/sl_i2cspm.c",
-      "${efr32_sdk_root}/platform/emlib/src/em_i2c.c",
-      "${examples_common_plat_dir}/TemperatureSensor.cpp",
-      "${sdk_support_root}/matter/efr32/${silabs_family}/${silabs_board}/autogen/sl_i2cspm_init.c",
-    ]
-  }
-
   if (!disable_lcd) {
     sources += [ "src/ThermostatUI.cpp" ]
   }