[nrfconnect][ota] Change image checking condition for OTA. (#28983)

If we want to confirm the new firmware update in the AppTask Init method we cannot rely on the imageProcessor. Instead, for the nRF53 target we should check if the image has been confirmed already, and if not, confirm it, for targets other than nRF53 we should use the mcuboot_swap_type function to verify whether the swapping type is equal to REVERT before verifying the image.
project-chip · Dec 22, 2023 · 71c111f · 71c111f
1 parent 8353371
commit 71c111f
Show file tree

Hide file tree

Showing 10 changed files with 28 additions and 50 deletions.
diff --git a/examples/all-clusters-app/nrfconnect/main/AppTask.cpp b/examples/all-clusters-app/nrfconnect/main/AppTask.cpp
@@ -180,11 +180,7 @@ CHIP_ERROR AppTask::Init()
 
 #ifdef CONFIG_CHIP_OTA_REQUESTOR
     /* OTA image confirmation must be done before the factory data init. */
-    err = OtaConfirmNewImage();
-    if (err != CHIP_NO_ERROR)
-    {
-        return err;
-    }
+    OtaConfirmNewImage();
 #endif
 
     // Initialize CHIP server

diff --git a/examples/all-clusters-minimal-app/nrfconnect/main/AppTask.cpp b/examples/all-clusters-minimal-app/nrfconnect/main/AppTask.cpp
@@ -139,11 +139,7 @@ CHIP_ERROR AppTask::Init()
 
 #ifdef CONFIG_CHIP_OTA_REQUESTOR
     /* OTA image confirmation must be done before the factory data init. */
-    err = OtaConfirmNewImage();
-    if (err != CHIP_NO_ERROR)
-    {
-        return err;
-    }
+    OtaConfirmNewImage();
 #endif
 
     // Initialize CHIP server

diff --git a/examples/light-switch-app/nrfconnect/main/AppTask.cpp b/examples/light-switch-app/nrfconnect/main/AppTask.cpp
@@ -181,11 +181,7 @@ CHIP_ERROR AppTask::Init()
 
 #ifdef CONFIG_CHIP_OTA_REQUESTOR
     /* OTA image confirmation must be done before the factory data init. */
-    err = OtaConfirmNewImage();
-    if (err != CHIP_NO_ERROR)
-    {
-        return err;
-    }
+    OtaConfirmNewImage();
 #endif
 
     // Initialize Timers

diff --git a/examples/lighting-app/nrfconnect/main/AppTask.cpp b/examples/lighting-app/nrfconnect/main/AppTask.cpp
@@ -203,6 +203,11 @@ CHIP_ERROR AppTask::Init()
     GetDFUOverSMP().ConfirmNewImage();
 #endif
 
+#ifdef CONFIG_CHIP_OTA_REQUESTOR
+    /* OTA image confirmation must be done before the factory data init. */
+    OtaConfirmNewImage();
+#endif
+
     // Initialize lighting device (PWM)
     uint8_t minLightLevel = kDefaultMinLevel;
     Clusters::LevelControl::Attributes::MinLevel::Get(kLightEndpointId, &minLightLevel);
@@ -217,15 +222,6 @@ CHIP_ERROR AppTask::Init()
     }
     mPWMDevice.SetCallbacks(ActionInitiated, ActionCompleted);
 
-#ifdef CONFIG_CHIP_OTA_REQUESTOR
-    /* OTA image confirmation must be done before the factory data init. */
-    err = OtaConfirmNewImage();
-    if (err != CHIP_NO_ERROR)
-    {
-        return err;
-    }
-#endif
-
     // Initialize CHIP server
 #if CONFIG_CHIP_FACTORY_DATA
     ReturnErrorOnFailure(mFactoryDataProvider.Init());

diff --git a/examples/lock-app/nrfconnect/main/AppTask.cpp b/examples/lock-app/nrfconnect/main/AppTask.cpp
@@ -189,11 +189,7 @@ CHIP_ERROR AppTask::Init()
 
 #ifdef CONFIG_CHIP_OTA_REQUESTOR
     /* OTA image confirmation must be done before the factory data init. */
-    err = OtaConfirmNewImage();
-    if (err != CHIP_NO_ERROR)
-    {
-        return err;
-    }
+    OtaConfirmNewImage();
 #endif
 
     // Initialize CHIP server

diff --git a/examples/platform/nrfconnect/util/OTAUtil.cpp b/examples/platform/nrfconnect/util/OTAUtil.cpp
@@ -66,20 +66,30 @@ void InitBasicOTARequestor()
     imageProcessor.TriggerFlashAction(ExternalFlashManager::Action::SLEEP);
 }
 
-CHIP_ERROR OtaConfirmNewImage()
+void OtaConfirmNewImage()
 {
-    CHIP_ERROR err                         = CHIP_NO_ERROR;
+#ifndef CONFIG_SOC_SERIES_NRF53X
+    /* Check if the image is run in the REVERT mode and eventually
+    confirm it to prevent reverting on the next boot.
+    On nRF53 target there is not way to verify current swap type
+    because we use permanent swap so we can skip it. */
+    VerifyOrReturn(mcuboot_swap_type() == BOOT_SWAP_TYPE_REVERT);
+#endif
+
     OTAImageProcessorImpl & imageProcessor = GetOTAImageProcessor();
-    if (imageProcessor.IsFirstImageRun())
+    if (!boot_is_img_confirmed())
     {
         CHIP_ERROR err = System::MapErrorZephyr(boot_write_img_confirmed());
         if (CHIP_NO_ERROR == err)
         {
             imageProcessor.SetImageConfirmed();
+            ChipLogProgress(SoftwareUpdate, "New firmware image confirmed");
+        }
+        else
+        {
+            ChipLogError(SoftwareUpdate, "Failed to confirm firmware image, it will be reverted on the next boot");
         }
     }
-    ChipLogError(SoftwareUpdate, "Failed to confirm firmware image, it will be reverted on the next boot");
-    return err;
 }
 
 #endif

diff --git a/examples/platform/nrfconnect/util/include/OTAUtil.h b/examples/platform/nrfconnect/util/include/OTAUtil.h
@@ -54,7 +54,7 @@ void InitBasicOTARequestor();
  * boot after the OTA update.
  * Other CHIP_ERROR codes if the image could not be confirmed.
  */
-CHIP_ERROR OtaConfirmNewImage();
+void OtaConfirmNewImage();
 
 #endif // CONFIG_CHIP_OTA_REQUESTOR
 

diff --git a/examples/pump-app/nrfconnect/main/AppTask.cpp b/examples/pump-app/nrfconnect/main/AppTask.cpp
@@ -162,11 +162,7 @@ CHIP_ERROR AppTask::Init()
 
 #ifdef CONFIG_CHIP_OTA_REQUESTOR
     /* OTA image confirmation must be done before the factory data init. */
-    err = OtaConfirmNewImage();
-    if (err != CHIP_NO_ERROR)
-    {
-        return err;
-    }
+    OtaConfirmNewImage();
 #endif
 
     // Initialize CHIP server

diff --git a/examples/pump-controller-app/nrfconnect/main/AppTask.cpp b/examples/pump-controller-app/nrfconnect/main/AppTask.cpp
@@ -160,11 +160,7 @@ CHIP_ERROR AppTask::Init()
 
 #ifdef CONFIG_CHIP_OTA_REQUESTOR
     /* OTA image confirmation must be done before the factory data init. */
-    err = OtaConfirmNewImage();
-    if (err != CHIP_NO_ERROR)
-    {
-        return err;
-    }
+    OtaConfirmNewImage();
 #endif
 
     // Initialize CHIP server

diff --git a/examples/window-app/nrfconnect/main/AppTask.cpp b/examples/window-app/nrfconnect/main/AppTask.cpp
@@ -167,11 +167,7 @@ CHIP_ERROR AppTask::Init()
 
 #ifdef CONFIG_CHIP_OTA_REQUESTOR
     /* OTA image confirmation must be done before the factory data init. */
-    err = OtaConfirmNewImage();
-    if (err != CHIP_NO_ERROR)
-    {
-        return err;
-    }
+    OtaConfirmNewImage();
 #endif
 
     // Initialize CHIP server