[Ameba] Shell commands update (#23005)

* [Shell] Read cluster attributes from matter shell
- Received data but DataResponse is still not printed out
- Support more OnOff commands for matter shell

* [Shell] enable inputting arguments for certain commands

* [Shell] Add levelcontrol commands to shell
- Separate different cluster commands into header files

* [Shell] Add colorcontrol commands to shell

* [Shell] Add thermostat commands to shell

* [Shell] Add handlers for group commands

* [README] Update readme for all-clusters-app

* [Shell] Add identify commands to shell

* [Shell] Increase the number of tokens to fit more arguments
- Add in missing colorcontrol commands
- Fix readme link

* [Shell] Enable reading of attribute list

* [Shell] Fix transition data type and argument errors
- Added logs for levelcontrol commands

* [Shell] Fix compile errors for when CONFIG_ENABLE_CHIP_SHELL is disabled
- Added CONFIG_ENABLE_CHIP_SHELL macro to block off code that requires shell

* [Resyle] fix styling

* Restyled by prettier-markdown

* [Shell] Change ColorTemperature to ColorTemperatureMireds

* [Readme] Update all-clusters-app readme

* [Shell] Change currentx and currenty to current-x and current-y respectively
- To avoid spell check failing as it identifies currenty as mispelling of currently

* [Readme] Restyle

* [Shell] Fix typecasting error

* [Shell] restyle

Co-authored-by: Restyled.io <[email protected]>

config/ameba/chip.cmake

@@ -30,6 +30,7 @@ list(
     -DCHIP_DEVICE_LAYER_TARGET=Ameba
     -DMBEDTLS_CONFIG_FILE=<mbedtls_config.h>
     -D_POSIX_REALTIME_SIGNALS
+    -DCHIP_SHELL_MAX_TOKENS=11
 )
 
 list(

examples/all-clusters-app/ameba/README.md

@@ -14,7 +14,7 @@ control.
     -   [Cluster control](#cluster-control)
     -   [Running RPC Console](#running-rpc-console)
     -   [Running Matter Shell](#running-matter-shell)
-    -   [Binding and Controlling a Lighting Device](#binding-and-controlling-a-lighting-device)
+    -   [Binding and Controlling a Device](#binding-and-controlling-a-device)
 
 ---
 
@@ -137,28 +137,55 @@ to be On or Off.
 
 -   Open the USB-TTL serial port and type `help` to view the available commands
 
-## Binding and Controlling a Lighting Device
+-   To know what are the available subcommands are there, enter `switch` command
+    in the shell
 
--   This example shows how to bind a Switch Device to a Lighting Device and
+## Binding and Controlling a Device
+
+-   This example shows how to bind a Switch Device to a Controllee Device and
     control it through the Matter Shell. One binding client (Switch Device) and
-    one binding server (Lighting Device) is required.
+    one binding server (Controllee) is required.
 
--   Commission the switch (nodeID 1) and lighting device (nodeID 2) using
+-   Commission the switch (nodeID 1) and controllee device (nodeID 2) using
     chip-tool.
 
               $ ./chip-tool pairing ble-wifi 1 <SSID> <PASSWORD> 20202021 3840
               $ ./chip-tool pairing ble-wifi 2 <SSID> <PASSWORD> 20202021 3840
 
-*   After successful commissioning, configure the ACL in the lighting device to
-    allow access from switch device and chip-tool.
+-   After successful commissioning, configure the ACL in the controllee device
+    to allow access from switch device and chip-tool.
 
               $ ./chip-tool accesscontrol write acl '[{"fabricIndex": 1, "privilege": 5, "authMode": 2, "subjects": [112233], "targets": null },{"fabricIndex": 1, "privilege": 5, "authMode": 2, "subjects": [1], "targets": null }]' 2 0
 
--   Bind the lighting device to the switch device.
+-   Bind the endpoint 1 OnOff cluster of the controllee device to the switch
+    device.
 
               $ ./chip-tool binding write binding '[{"fabricIndex": 1, "node":2, "endpoint":1, "cluster":6}]' 1 1
 
--   Control the lighting device through the switch device's Matter Shell
+-   Send OnOff command to the device through the switch device's Matter Shell
+
+    `switch onoff on`
+
+    `switch onoff off`
+
+*   You may also bind more than one cluster to the switch device. Below command
+    binds the Identify, OnOff, LevelControl, ColorControl and Thermostat
+    clusters to the switch device.
+
+              $ ./chip-tool binding write binding '[{"fabricIndex": 1, "node":2, "endpoint":1, "cluster":3}, {"fabricIndex": 1, "node":2, "endpoint":1, "cluster":6}, {"fabricIndex": 1, "node":2, "endpoint":1, "cluster":8}, {"fabricIndex": 1, "node":2, "endpoint":1, "cluster":768}, {"fabricIndex": 1, "node":2, "endpoint":1, "cluster":513}]' 1 1
+
+-   After binding the clusters, you may send these cluster commands to the
+    controllee device through the switch device's Matter Shell. Follow the
+    format shown in the description of the commands.
+
+    `switch onoff on`
+
+    `switch levelcontrol movetolevel 100 0 0 0`
+
+    `switch colorcontrol movetohue 100 0 0 0 0`
+
+    `switch thermostat SPRL 0 0`
+
+*   You may also request to read cluster attributes from Matter Shell
 
-              > switch onoff on
-              > switch onoff off
+    `switch <cluster> read <attribute>`

examples/all-clusters-app/ameba/chip_main.cmake

@@ -255,6 +255,7 @@ list(
     -DUSE_ZAP_CONFIG
     -DCHIP_HAVE_CONFIG_H
     -DMBEDTLS_CONFIG_FILE=<mbedtls_config.h>
+    -DCHIP_SHELL_MAX_TOKENS=11
 )
 
 if (matter_enable_persistentstorage_audit)