[Silabs] Adds fix for SPI corruption when SPI was multiplexed (#26080)

* Adds re factored code with the use of DMA * Changes ordering of spi_cs_assert * Add logs * Reverts SPI drvier re-init from post APIs * Revert changes * Adds delay and disable autoCsEnable * Revert "Adds delay and disable autoCsEnable" This reverts commit d038bb6. * Adds code to make SL_SPIDRV_HANDLE available in multiplex logic * Adds working logic * Cleanup logs and comments * Adds temporary fix * Use the config provided BITRATE * Revert "Use the config provided BITRATE" This reverts commit 05574a3. * Use MY_USART instead of USART0 * Adds guard to check for current and incoming baudrate * Revert MY_USART to USART0 * Requires multiplexing if SL_WIFI is present * Update examples/platform/silabs/efr32/spi_multiplex.c Co-authored-by: Junior Martinez <[email protected]> --------- Co-authored-by: Junior Martinez <[email protected]>
project-chip · Jul 8, 2023 · 4430712 · 4430712
1 parent 9778b99
commit 4430712
Show file tree

Hide file tree

Showing 4 changed files with 50 additions and 92 deletions.
diff --git a/examples/platform/silabs/efr32/display/lcd.cpp b/examples/platform/silabs/efr32/display/lcd.cpp
@@ -71,12 +71,6 @@ CHIP_ERROR SilabsLCD::Init(uint8_t * name, bool initialState)
         err = CHIP_ERROR_INTERNAL;
     }
 
-#if (defined(EFR32MG24) && defined(WF200_WIFI))
-    if (pr_type != LCD)
-    {
-        pr_type = LCD;
-    }
-#endif
     /* Initialize the DMD module for the DISPLAY device driver. */
     status = DMD_init(0);
     if (DMD_OK != status)

diff --git a/examples/platform/silabs/efr32/spi_multiplex.c b/examples/platform/silabs/efr32/spi_multiplex.c
@@ -38,6 +38,11 @@
  *****************************************************************************/
 void spi_drv_reinit(uint32_t baudrate)
 {
+    if (USART_BaudrateGet(USART0) == baudrate)
+    {
+        // USART synced to baudrate already
+        return;
+    }
     // USART is used in MG24 + WF200 combination
     USART_InitSync_TypeDef usartInit = USART_INITSYNC_DEFAULT;
     usartInit.msbf                   = true;
@@ -50,29 +55,6 @@ void spi_drv_reinit(uint32_t baudrate)
     USART_InitSync(USART0, &usartInit);
 }
 
-/****************************************************************************
- * @fn  void set_spi_baudrate()
- * @brief
- *     Setting the appropriate SPI baudrate
- * @param[in] None
- * @return returns void
- *****************************************************************************/
-void set_spi_baudrate(peripheraltype_t pr_type)
-{
-    if (pr_type == LCD)
-    {
-        spi_drv_reinit(LCD_BIT_RATE);
-    }
-    else if (pr_type == EXP_HDR)
-    {
-        spi_drv_reinit(EXP_HDR_BIT_RATE);
-    }
-    else if (pr_type == EXT_SPIFLASH)
-    {
-        spi_drv_reinit(SPI_FLASH_BIT_RATE);
-    }
-}
-
 /****************************************************************************
  * @fn  void spiflash_cs_assert()
  * @brief
@@ -110,14 +92,10 @@ void pre_bootloader_spi_transfer(void)
     {
         return;
     }
-    /*
-     * CS for Expansion header controlled within GSDK,
-     * however we need to ensure CS for Expansion header is High/disabled before use of EXT SPI Flash
-     */
-    sl_wfx_host_spi_cs_deassert();
     /*
      * Assert CS pin for EXT SPI Flash
      */
+    spi_drv_reinit(SL_BIT_RATE_SPI_FLASH);
     spiflash_cs_assert();
 }
 
@@ -150,11 +128,7 @@ void pre_lcd_spi_transfer(void)
     {
         return;
     }
-    if (pr_type != LCD)
-    {
-        pr_type = LCD;
-        set_spi_baudrate(pr_type);
-    }
+    spi_drv_reinit(SL_BIT_RATE_LCD);
     /*LCD CS is handled as part of LCD gsdk*/
 }
 
@@ -208,7 +182,6 @@ void post_uart_transfer(void)
         return;
     }
     GPIO_PinModeSet(gpioPortA, 8, gpioModeInputPull, 1);
-    set_spi_baudrate(EXP_HDR);
     xSemaphoreGive(spi_sem_sync_hdl);
     sl_wfx_host_enable_platform_interrupt();
     sl_wfx_enable_irq();

diff --git a/examples/platform/silabs/efr32/spi_multiplex.h b/examples/platform/silabs/efr32/spi_multiplex.h
@@ -25,23 +25,26 @@ extern "C" {
 #include "sl_mx25_flash_shutdown_usart_config.h"
 #include "sl_spidrv_exp_config.h"
 #include "sl_wfx_host_api.h"
+#include "spidrv.h"
 
-#define LCD_BIT_RATE 1100000
-#define EXP_HDR_BIT_RATE 16000000
-#define SPI_FLASH_BIT_RATE 16000000
-
-typedef enum PERIPHERAL_TYPE
-{
-    EXP_HDR = 0,
-    LCD,
-    EXT_SPIFLASH,
-} peripheraltype_t;
+#define SL_BIT_RATE_LCD 1100000
+#define SL_BIT_RATE_EXP_HDR 16000000
+#define SL_BIT_RATE_SPI_FLASH 16000000
+#define SL_BIT_RATE_UART_CONSOLE 16000000
 
 extern SemaphoreHandle_t spi_sem_sync_hdl;
-extern peripheraltype_t pr_type;
+
+#ifdef RS911X_WIFI
+extern SPIDRV_Handle_t sl_spidrv_eusart_exp_handle;
+#define SL_SPIDRV_HANDLE sl_spidrv_eusart_exp_handle
+#endif
+
+#ifdef WF200_WIFI
+extern SPIDRV_Handle_t sl_spidrv_exp_handle;
+#define SL_SPIDRV_HANDLE sl_spidrv_exp_handle
+#endif
 
 void spi_drv_reinit(uint32_t);
-void set_spi_baudrate(peripheraltype_t);
 
 void spiflash_cs_assert(void);
 void spiflash_cs_deassert(void);

diff --git a/examples/platform/silabs/efr32/wf200/efr_spi.c b/examples/platform/silabs/efr32/wf200/efr_spi.c
@@ -49,13 +49,11 @@
 #include "sl_power_manager.h"
 #endif
 
-#if defined(EFR32MG24)
+#if SL_WIFI
 #include "spi_multiplex.h"
 StaticSemaphore_t spi_sem_peripharal;
 SemaphoreHandle_t spi_sem_sync_hdl;
-peripheraltype_t pr_type = EXP_HDR;
 #endif
-extern SPIDRV_Handle_t sl_spidrv_exp_handle;
 
 #define USART SL_WFX_HOST_PINOUT_SPI_PERIPHERAL
 
@@ -90,8 +88,8 @@ sl_status_t sl_wfx_host_init_bus(void)
     spi_enabled = true;
 
     /* Assign allocated DMA channel */
-    tx_dma_channel = sl_spidrv_exp_handle->txDMACh;
-    rx_dma_channel = sl_spidrv_exp_handle->rxDMACh;
+    tx_dma_channel = SL_SPIDRV_HANDLE->txDMACh;
+    rx_dma_channel = SL_SPIDRV_HANDLE->rxDMACh;
 
     /*
      * Route EUSART1 MOSI, MISO, and SCLK to the specified pins.  CS is
@@ -116,7 +114,7 @@ sl_status_t sl_wfx_host_init_bus(void)
 #if defined(EFR32MG24)
     spi_sem_sync_hdl = xSemaphoreCreateBinaryStatic(&spi_sem_peripharal);
     xSemaphoreGive(spi_sem_sync_hdl);
-#endif
+#endif /* EFR32MG24 */
     return SL_STATUS_OK;
 }
 
@@ -130,6 +128,7 @@ sl_status_t sl_wfx_host_init_bus(void)
 sl_status_t sl_wfx_host_deinit_bus(void)
 {
     vSemaphoreDelete(spi_sem);
+    vSemaphoreDelete(spi_sem_sync_hdl);
     // Stop DMAs.
     DMADRV_StopTransfer(rx_dma_channel);
     DMADRV_StopTransfer(tx_dma_channel);
@@ -149,6 +148,12 @@ sl_status_t sl_wfx_host_deinit_bus(void)
  *****************************************************************************/
 sl_status_t sl_wfx_host_spi_cs_assert()
 {
+    configASSERT(spi_sem_sync_hdl);
+    if (xSemaphoreTake(spi_sem_sync_hdl, portMAX_DELAY) != pdTRUE)
+    {
+        return SL_STATUS_TIMEOUT;
+    }
+    spi_drv_reinit(SL_BIT_RATE_EXP_HDR);
     GPIO_PinOutClear(SL_SPIDRV_EXP_CS_PORT, SL_SPIDRV_EXP_CS_PIN);
     return SL_STATUS_OK;
 }
@@ -163,6 +168,7 @@ sl_status_t sl_wfx_host_spi_cs_assert()
 sl_status_t sl_wfx_host_spi_cs_deassert()
 {
     GPIO_PinOutSet(SL_SPIDRV_EXP_CS_PORT, SL_SPIDRV_EXP_CS_PIN);
+    xSemaphoreGive(spi_sem_sync_hdl);
     return SL_STATUS_OK;
 }
 
@@ -258,19 +264,6 @@ void transmitDMA(uint8_t * buffer, uint16_t buffer_length)
 sl_status_t sl_wfx_host_spi_transfer_no_cs_assert(sl_wfx_host_bus_transfer_type_t type, uint8_t * header, uint16_t header_length,
                                                   uint8_t * buffer, uint16_t buffer_length)
 {
-    sl_status_t result = SL_STATUS_FAIL;
-#if defined(EFR32MG24)
-    if (pr_type != EXP_HDR)
-    {
-        pr_type = EXP_HDR;
-        set_spi_baudrate(pr_type);
-    }
-    if (xSemaphoreTake(spi_sem_sync_hdl, portMAX_DELAY) != pdTRUE)
-    {
-        return SL_STATUS_TIMEOUT;
-    }
-    sl_wfx_host_spi_cs_assert();
-#endif
     const bool is_read = (type == SL_WFX_BUS_READ);
 
     while (!(MY_USART->STATUS & USART_STATUS_TXBL))
@@ -298,34 +291,29 @@ sl_status_t sl_wfx_host_spi_transfer_no_cs_assert(sl_wfx_host_bus_transfer_type_
     if (buffer_length > 0)
     {
         MY_USART->CMD = USART_CMD_CLEARRX | USART_CMD_CLEARTX;
-        if (xSemaphoreTake(spi_sem, portMAX_DELAY) == pdTRUE)
+        // Reset the semaphore
+        configASSERT(spi_sem);
+        if (xSemaphoreTake(spi_sem, portMAX_DELAY) != pdTRUE)
         {
-            if (is_read)
-            {
-                receiveDMA(buffer, buffer_length);
-                result = SL_STATUS_OK;
-            }
-            else
-            {
-                transmitDMA(buffer, buffer_length);
-                result = SL_STATUS_OK;
-            }
+            return SL_STATUS_TIMEOUT;
+        }
 
-            if (xSemaphoreTake(spi_sem, portMAX_DELAY) == pdTRUE)
-            {
-                xSemaphoreGive(spi_sem);
-            }
+        if (is_read)
+        {
+            receiveDMA(buffer, buffer_length);
         }
         else
         {
-            result = SL_STATUS_TIMEOUT;
+            transmitDMA(buffer, buffer_length);
+        }
+        // wait for dma_complete by using the same spi_semaphore
+        if (xSemaphoreTake(spi_sem, portMAX_DELAY) != pdTRUE)
+        {
+            return SL_STATUS_TIMEOUT;
         }
+        xSemaphoreGive(spi_sem);
     }
-#if defined(EFR32MG24)
-    sl_wfx_host_spi_cs_deassert();
-    xSemaphoreGive(spi_sem_sync_hdl);
-#endif
-    return result;
+    return SL_STATUS_OK;
 }
 
 /****************************************************************************