[Telink] Add Lock, Pump & Pump Controller demo-apps (#24967)

* [Telink] Added Lock-app-demo example * [Telink] Minor fixes * [Telink] Lock App added (GitHub CI, Readme & src fixes) * [Telink] remove commented code * [Telink] Fix Lock CI * [Telink] restyle * [Telink] Pump & Pump Controller demo-apps added * [Telink] Pump & Pump Controller Apps CI files modified * [Telink] Restyle * [Telink] Set correct build path * [Telink] Lock credentials modified accordingly to spec * [Telink] restyling * [Telink] Credentials non-zero capacity fix * [Telink] removed unused code (callbacks) --------- Co-authored-by: Dmytro Huz <[email protected]> Co-authored-by: Dmytro Huz <[email protected]>
project-chip · Sep 29, 2023 · 1632614 · 1632614
1 parent f52a9ac
commit 1632614
Show file tree

Hide file tree

Showing 47 changed files with 5,055 additions and 3 deletions.
diff --git a/.github/workflows/examples-telink.yaml b/.github/workflows/examples-telink.yaml
@@ -115,6 +115,15 @@ jobs:
                     out/telink-tlsr9518adk80d-light-switch/zephyr/zephyr.elf \
                     /tmp/bloat_reports/
 
+            - name: Build example Telink Lock App
+              run: |
+                  ./scripts/run_in_build_env.sh \
+                    "./scripts/build/build_examples.py --target 'telink-tlsr9518adk80d-lock' build"
+                  .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
+                    telink tlsr9518adk80d lock-app \
+                    out/telink-tlsr9518adk80d-lock/zephyr/zephyr.elf \
+                    /tmp/bloat_reports/
+
             - name: Build example Telink OTA Requestor App
               run: |
                   ./scripts/run_in_build_env.sh \
@@ -124,6 +133,24 @@ jobs:
                     out/telink-tlsr9518adk80d-ota-requestor/zephyr/zephyr.elf \
                     /tmp/bloat_reports/
 
+            - name: Build example Telink Pump App
+              run: |
+                  ./scripts/run_in_build_env.sh \
+                    "./scripts/build/build_examples.py --target 'telink-tlsr9518adk80d-pump' build"
+                  .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
+                    telink tlsr9518adk80d pump-app \
+                    out/telink-tlsr9518adk80d-pump/zephyr/zephyr.elf \
+                    /tmp/bloat_reports/
+
+            - name: Build example Telink Pump Controller App
+              run: |
+                  ./scripts/run_in_build_env.sh \
+                    "./scripts/build/build_examples.py --target 'telink-tlsr9518adk80d-pump-controller' build"
+                  .environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
+                    telink tlsr9518adk80d pump-controller-app \
+                    out/telink-tlsr9518adk80d-pump-controller/zephyr/zephyr.elf \
+                    /tmp/bloat_reports/
+
             - name: Build example Telink Thermostat App
               run: |
                   ./scripts/run_in_build_env.sh \

diff --git a/.vscode/tasks.json b/.vscode/tasks.json
@@ -641,7 +641,10 @@
                 "telink-tlsr9518adk80d-contact-sensor",
                 "telink-tlsr9518adk80d-light",
                 "telink-tlsr9518adk80d-light-switch",
+                "telink-tlsr9518adk80d-lock-app",
                 "telink-tlsr9518adk80d-ota-requestor",
+                "telink-tlsr9518adk80d-pump-app",
+                "telink-tlsr9518adk80d-pump-controller-app",
                 "telink-tlsr9518adk80d-thermostat",
                 "tizen-arm-light"
             ]

diff --git a/examples/contact-sensor-app/telink/README.md b/examples/contact-sensor-app/telink/README.md
@@ -92,7 +92,7 @@ be used to specify the the effect. It is able to be in following effects:
 
 #### Indicate current state of Contact Sensor
 
-**Blue** LED shows current state of Contact Sensor
+**White** LED shows current state of Contact Sensor
 
 ### CHIP tool commands
 

diff --git a/examples/contact-sensor-app/telink/include/AppConfig.h b/examples/contact-sensor-app/telink/include/AppConfig.h
@@ -31,5 +31,5 @@
 // LEDs config
 #define LEDS_PORT DEVICE_DT_GET(DT_NODELABEL(gpiob))
 #define SYSTEM_STATE_LED 7
-#define CONTACT_STATE_LED 4
+#define CONTACT_STATE_LED 6
 #define LIGHTING_PWM_SPEC_IDENTIFY_GREEN PWM_DT_SPEC_GET(DT_ALIAS(pwm_led3))
diff --git a/examples/lock-app/telink/.gitignore b/examples/lock-app/telink/.gitignore
@@ -0,0 +1 @@
+/build/
diff --git a/examples/lock-app/telink/CMakeLists.txt b/examples/lock-app/telink/CMakeLists.txt
@@ -0,0 +1,65 @@
+#
+#    Copyright (c) 2023 Project CHIP Authors
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+cmake_minimum_required(VERSION 3.13.1)
+
+set(BOARD tlsr9518adk80d)
+
+get_filename_component(CHIP_ROOT ${CMAKE_CURRENT_SOURCE_DIR}/third_party/connectedhomeip REALPATH)
+get_filename_component(TELINK_COMMON ${CHIP_ROOT}/examples/platform/telink REALPATH)
+get_filename_component(GEN_DIR ${CHIP_ROOT}/zzz_generated/ REALPATH)
+
+set(CONF_FILE ${CHIP_ROOT}/config/telink/app/zephyr.conf prj.conf)
+
+# Load NCS/Zephyr build system
+list(APPEND ZEPHYR_EXTRA_MODULES ${CHIP_ROOT}/config/telink/chip-module)
+find_package(Zephyr HINTS $ENV{ZEPHYR_BASE})
+
+project(chip-telink-lock-example)
+
+include(${CHIP_ROOT}/config/telink/app/enable-gnu-std.cmake)
+include(${CHIP_ROOT}/src/app/chip_data_model.cmake)
+
+target_compile_options(app PRIVATE -fpermissive)
+
+target_include_directories(app PRIVATE
+                           include
+                           ${GEN_DIR}/app-common
+                           ${GEN_DIR}/lock-app
+                           ${TELINK_COMMON}/util/include
+                           ${TELINK_COMMON}/app/include)
+
+add_definitions(
+    "-DCHIP_ADDRESS_RESOLVE_IMPL_INCLUDE_HEADER=<lib/address_resolve/AddressResolve_DefaultImpl.h>"
+)
+
+target_sources(app PRIVATE
+               src/AppTask.cpp
+               src/main.cpp
+               src/ZclCallbacks.cpp
+               src/BoltLockManager.cpp
+               ${TELINK_COMMON}/util/src/LEDWidget.cpp
+               ${TELINK_COMMON}/util/src/ButtonManager.cpp
+               ${TELINK_COMMON}/util/src/ThreadUtil.cpp
+               ${TELINK_COMMON}/util/src/PWMDevice.cpp)
+
+chip_configure_data_model(app
+    INCLUDE_SERVER
+    ZAP_FILE ${CMAKE_CURRENT_SOURCE_DIR}/../lock-common/lock-app.zap
+)
+
+if(CONFIG_CHIP_OTA_REQUESTOR)
+    target_sources(app PRIVATE ${TELINK_COMMON}/util/src/OTAUtil.cpp)
+endif()
diff --git a/examples/lock-app/telink/README.md b/examples/lock-app/telink/README.md
@@ -0,0 +1,181 @@
+# Matter Telink Lock Example Application
+
+The Telink Lock Example shows the functionality of a remote control door-lock
+device with one basic bolt. It uses button to test changing the lock and device
+states and LEDs to show the state of these changes. You can use this example as
+a reference for creating your own application.
+
+![Telink B91 EVK](http://wiki.telink-semi.cn/wiki/assets/Hardware/B91_Generic_Starter_Kit_Hardware_Guide/connection_chart.png)
+
+## Build and flash
+
+1. Pull docker image from repository:
+
+    ```bash
+    $ docker pull connectedhomeip/chip-build-telink:latest
+    ```
+
+1. Run docker container:
+
+    ```bash
+    $ docker run -it --rm -v ${CHIP_BASE}:/root/chip -v /dev/bus/usb:/dev/bus/usb --device-cgroup-rule "c 189:* rmw" connectedhomeip/chip-build-telink:latest
+    ```
+
+    here `${CHIP_BASE}` is directory which contains CHIP repo files **!!!Pay
+    attention that OUTPUT_DIR should contains ABSOLUTE path to output dir**
+
+1. Activate the build environment:
+
+    ```bash
+    $ source ./scripts/activate.sh
+    ```
+
+1. In the example dir run:
+
+    ```bash
+    $ west build
+    ```
+
+1. Flash binary:
+
+    ```
+    $ west flash --erase
+    ```
+
+## Usage
+
+### UART
+
+To get output from device, connect UART to following pins:
+
+| Name | Pin                           |
+| :--: | :---------------------------- |
+|  RX  | PB3 (pin 17 of J34 connector) |
+|  TX  | PB2 (pin 16 of J34 connector) |
+| GND  | GND                           |
+
+### Buttons
+
+The following buttons are available on **tlsr9518adk80d** board:
+
+| Name     | Function               | Description                                                                                            |
+| :------- | :--------------------- | :----------------------------------------------------------------------------------------------------- |
+| Button 1 | Factory reset          | Perform factory reset to forget currently commissioned Thread network and back to uncommissioned state |
+| Button 2 | Lock control           | Manually triggers the bolt lock state                                                                  |
+| Button 3 | Thread start           | Commission thread with static credentials and enables the Thread on device                             |
+| Button 4 | Open commission window | The button is opening commissioning window to perform commissioning over BLE                           |
+
+### LEDs
+
+#### Indicate current state of Thread network
+
+**Red** LED indicates current state of Thread network. It is able to be in
+following states:
+
+| State                       | Description                                                                  |
+| :-------------------------- | :--------------------------------------------------------------------------- |
+| Blinks with short pulses    | Device is not commissioned to Thread, Thread is disabled                     |
+| Blinks with frequent pulses | Device is commissioned, Thread enabled. Device trying to JOIN thread network |
+| Blinks with wide pulses     | Device commissioned and joined to thread network as CHILD                    |
+
+#### Indicate identify of device
+
+**Green** LED used to identify the device. The LED starts blinking when the
+Identify command of the Identify cluster is received. The command's argument can
+be used to specify the the effect. It is able to be in following effects:
+
+| Effect                          | Description                                                          |
+| :------------------------------ | :------------------------------------------------------------------- |
+| Blinks (200 ms on/200 ms off)   | Blink (EMBER_ZCL_IDENTIFY_EFFECT_IDENTIFIER_BLINK)                   |
+| Breathe (during 1000 ms)        | Breathe (EMBER_ZCL_IDENTIFY_EFFECT_IDENTIFIER_BREATHE)               |
+| Blinks (50 ms on/950 ms off)    | Okay (EMBER_ZCL_IDENTIFY_EFFECT_IDENTIFIER_OKAY)                     |
+| Blinks (1000 ms on/1000 ms off) | Channel Change (EMBER_ZCL_IDENTIFY_EFFECT_IDENTIFIER_CHANNEL_CHANGE) |
+| Blinks (950 ms on/50 ms off)    | Finish (EMBER_ZCL_IDENTIFY_EFFECT_IDENTIFIER_FINISH_EFFECT)          |
+| LED off                         | Stop (EMBER_ZCL_IDENTIFY_EFFECT_IDENTIFIER_STOP_EFFECT)              |
+
+#### Indicate current Lock state
+
+**White** LED shows current state of Lock
+
+### CHIP tool commands
+
+1. Build
+   [chip-tool cli](https://github.com/project-chip/connectedhomeip/blob/master/examples/chip-tool/README.md)
+
+2. Pair with device
+
+    ```
+    ${CHIP_TOOL_DIR}/chip-tool pairing ble-thread ${NODE_ID} hex:${DATASET} ${PIN_CODE} ${DISCRIMINATOR}
+    ```
+
+    Example:
+
+    ```
+    ./chip-tool pairing ble-thread 1234 hex:0e080000000000010000000300000f35060004001fffe0020811111111222222220708fd61f77bd3df233e051000112233445566778899aabbccddeeff030e4f70656e54687265616444656d6f010212340410445f2b5ca6f2a93a55ce570a70efeecb0c0402a0fff8 20202021 3840
+    ```
+
+### OTA with Linux OTA Provider
+
+OTA feature enabled by default only for ota-requestor-app example. To enable OTA
+feature for another Telink example:
+
+-   set CONFIG_CHIP_OTA_REQUESTOR=y in corresponding "prj.conf" configuration
+    file.
+
+After build application with enabled OTA feature, use next binary files:
+
+-   zephyr.bin - main binary to flash PCB (Use 2MB PCB).
+-   zephyr-ota.bin - binary for OTA Provider
+
+All binaries has the same SW version. To test OTA “zephyr-ota.bin” should have
+higher SW version than base SW. Set CONFIG_CHIP_DEVICE_SOFTWARE_VERSION=2 in
+corresponding “prj.conf” conﬁguration file.
+
+Usage of OTA:
+
+-   Build the [Linux OTA Provider](../../ota-provider-app/linux)
+
+    ```
+    ./scripts/examples/gn_build_example.sh examples/ota-provider-app/linux out/ota-provider-app chip_config_network_layer_ble=false
+    ```
+
+-   Run the Linux OTA Provider with OTA image.
+
+    ```
+    ./chip-ota-provider-app -f zephyr-ota.bin
+    ```
+
+-   Provision the Linux OTA Provider using chip-tool
+
+    ```
+    ./chip-tool pairing onnetwork ${OTA_PROVIDER_NODE_ID} 20202021
+    ```
+
+    here:
+
+    -   \${OTA_PROVIDER_NODE_ID} is the node id of Linux OTA Provider
+
+-   Configure the ACL of the ota-provider-app to allow access
+
+    ```
+    ./chip-tool accesscontrol write acl '[{"fabricIndex": 1, "privilege": 5, "authMode": 2, "subjects": [112233], "targets": null}, {"fabricIndex": 1, "privilege": 3, "authMode": 2, "subjects": null, "targets": null}]' ${OTA_PROVIDER_NODE_ID} 0
+    ```
+
+    here:
+
+    -   \${OTA_PROVIDER_NODE_ID} is the node id of Linux OTA Provider
+
+-   Use the chip-tool to announce the ota-provider-app to start the OTA process
+
+    ```
+    ./chip-tool otasoftwareupdaterequestor announce-ota-provider ${OTA_PROVIDER_NODE_ID} 0 0 0 ${DEVICE_NODE_ID} 0
+    ```
+
+    here:
+
+    -   \${OTA_PROVIDER_NODE_ID} is the node id of Linux OTA Provider
+    -   \${DEVICE_NODE_ID} is the node id of paired device
+
+Once the transfer is complete, OTA requestor sends ApplyUpdateRequest command to
+OTA provider for applying the image. Device will restart on successful
+application of OTA image.
diff --git a/examples/lock-app/telink/include/AppConfig.h b/examples/lock-app/telink/include/AppConfig.h
@@ -0,0 +1,35 @@
+/*
+ *
+ *    Copyright (c) 2023 Project CHIP Authors
+ *    All rights reserved.
+ *
+ *    Licensed under the Apache License, Version 2.0 (the "License");
+ *    you may not use this file except in compliance with the License.
+ *    You may obtain a copy of the License at
+ *
+ *        http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *    Unless required by applicable law or agreed to in writing, software
+ *    distributed under the License is distributed on an "AS IS" BASIS,
+ *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *    See the License for the specific language governing permissions and
+ *    limitations under the License.
+ */
+
+#pragma once
+
+// ---- Lock Example App Config ----
+
+// Buttons config
+#define BUTTON_PORT DEVICE_DT_GET(DT_NODELABEL(gpioc))
+
+#define BUTTON_PIN_1 2
+#define BUTTON_PIN_3 3
+#define BUTTON_PIN_4 1
+#define BUTTON_PIN_2 0
+
+// LEDs config
+#define LEDS_PORT DEVICE_DT_GET(DT_NODELABEL(gpiob))
+#define SYSTEM_STATE_LED 7
+#define LOCK_STATE_LED 6
+#define LIGHTING_PWM_SPEC_IDENTIFY_GREEN PWM_DT_SPEC_GET(DT_ALIAS(pwm_led3))