Skip to content

Commit

Permalink
doc: chip_tool_guide: add steps for subscription (#27346)
Browse files Browse the repository at this point in the history 
* doc: chip_tool_guide: add steps for subscription

Extened the CHIP Tool guide with steps for subscribing to arguments
and events. Moved some existing content around to fit the new section.

Signed-off-by: Grzegorz Ferenc <[email protected]>

* Restyled by prettier-markdown

* Update docs/guides/chip_tool_guide.md

Co-authored-by: Michał Szablowski <[email protected]>

* address comments from reviews

Signed-off-by: Grzegorz Ferenc <[email protected]>

* Restyled by prettier-markdown

* remove tips as per Boris' comment

Signed-off-by: Grzegorz Ferenc <[email protected]>

---------

Signed-off-by: Grzegorz Ferenc <[email protected]>
Co-authored-by: Restyled.io <[email protected]>
Co-authored-by: Justin Wood <[email protected]>
Co-authored-by: Michał Szablowski <[email protected]>
  • Loading branch information
@greg-fer @restyled-commits
@woody-apple @doublemis1 @pull
4 people authored and pull[bot] committed Dec 6, 2023
1 parent bfeb67f commit 1543590
Showing 1 changed file with 286 additions and 55 deletions.
341 changes: 286 additions & 55 deletions docs/guides/chip_tool_guide.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -54,16 +54,73 @@ To check if the CHIP Tool runs correctly, execute the following command from the
$ ./chip-tool
```
As a result, the CHIP Tool prints all available commands. These are called
_clusters_ in this context, but not all listed commands correspond to the
_clusters_ in the Data Model (for example, pairing or discover commands). Each
listed command can however become the root of the new more complex command by
appending it with sub-commands. Examples of specific commands and their use
cases are described in the
As a result, the CHIP Tool starts in the default
[single-command mode](#single-command-mode-default) and prints all available
commands. These are called _clusters_ in this context, but not all listed
commands correspond to the _clusters_ in the Data Model (for example, pairing or
discover commands). Each listed command can however become the root of the new
more complex command by appending it with sub-commands. Examples of specific
commands and their use cases are described in the
[Supported commands and options](#supported-commands-and-options) section.
<hr>
## CHIP Tool modes
The CHIP Tool can run in one of the following modes:
### Single-command mode (default)
In this mode, the CHIP Tool will exit with a timeout error if any single command
does not complete within a certain timeout period.
The timeout error will look similar to the following one:
```
[1650992689511] [32397:1415601] CHIP: [TOO] Run command failure: ../../../examples/chip-tool/commands/common/CHIPCommand.cpp:392: CHIP Error 0x00000032: Timeout
```
Moreover, when using the single-command mode, the CHIP Tool will establish a new
CASE session with every command sent.
#### Modifying timeout duration in single-command mode
This timeout can be modified for any command execution by supplying the optional
`--timeout` parameter, which takes a value in seconds, with the maximum being
65535 seconds.
**Example of command:**
```
$ ./chip-tool otasoftwareupdaterequestor subscribe-event state-transition 5 10 0x1234567890 0 --timeout 65535
```
### Interactive mode
In this mode, a command will terminate with an error if it does not complete
within the timeout period. However, the CHIP Tool will not be terminated and it
will not terminate processes that previous commands have started. Moreover, when
using the interactive mode, the CHIP Tool will establish a new CASE session only
when there is no session available yet. On the following commands, it will use
the existing session.
#### Starting the interactive mode
For commands such as event subscriptions that need to run for an extended period
of time, the CHIP Tool can be started in interactive mode first before running
the command.
To start the interactive mode, run the following command:
```
$ ./chip-tool interactive start
```
In this mode, you can subscribe to events or attributes. For detailed steps, see
[Subscribing to events or attributes](#subscribing-to-events-or-attributes).
<hr>
## Using CHIP Tool for Matter device testing
The following steps depend on the application clusters that you implemented on
Expand Down Expand Up @@ -398,55 +455,6 @@ $ ./chip-tool basic
This section contains a general list of various CHIP Tool commands and options,
not limited to commissioning procedure and cluster interaction.
### Interactive mode versus single-command mode
The CHIP Tool can run in one of the following modes:
- Single-command mode (default) - In this mode, the CHIP Tool will exit with a
timeout error if any single command does not complete within a certain
timeout period.
The timeout error will look similar to the following one:
```
[1650992689511] [32397:1415601] CHIP: [TOO] Run command failure: ../../../examples/chip-tool/commands/common/CHIPCommand.cpp:392: CHIP Error 0x00000032: Timeout
```
Moreover, when using the single-command mode, the CHIP Tool will establish a
new CASE session with every command sent.
- Interactive mode - In this mode, a command will terminate with an error if
it does not complete within the timeout period. However, the CHIP Tool will
not be terminated and it will not terminate processes that previous commands
have started. Moreover, when using the interactive mode, the CHIP Tool will
establish a new CASE session only when there is no session available yet. On
the following commands, it will use the existing session.
#### Modifying timeout duration in single-command mode
This timeout can be modified for any command execution by supplying the optional
`--timeout` parameter, which takes a value in seconds, with the maximum being
65535 seconds.
**Example of command:**
```
$ ./chip-tool otasoftwareupdaterequestor subscribe-event state-transition 5 10 0x1234567890 0 --timeout 65535
```
#### Starting the interactive mode
For commands such as event subscriptions that need to run for an extended period
of time, the CHIP Tool can be started in interactive mode first before running
the command.
**Example of command:**
```
$ ./chip-tool interactive start
otasoftwareupdaterequestor subscribe-event state-transition 5 10 ${NODE_ID} 0
```
### Printing all supported clusters
To print all clusters supported by the CHIP Tool, run the following command:
Expand Down Expand Up @@ -1013,3 +1021,226 @@ In this command:
```
$ ./chip-tool onoff toggle 1 1 --commissioner-name beta
```
<hr>
### Subscribing to events or attributes
Subscribing to an event or an attribute lets you mirror the state of the event
or the attribute as it changes in the Matter network. The list of events or
attributes you can subscribe to depends on the chosen cluster.
You can have more than one subscription at any given time and subscribe to more
than one attribute or event within one subscription (those attributes or events
can come from different clusters). However, you cannot subscribe to both
attributes and events as part of a single subscription. In other words, each
subscription must be dedicated exclusively to either attributes or events.
For more information about subscriptions, see the Matter specification at
chapter 8, section 5 (Subscribe Interaction).
> **Note:** The subscription behavior will be different if you set the
> subscription to be sent with the parameter `isUrgent` set to `True`. See the
> Matter specification for more information.
#### Subscribing to an attribute
The following procedure will use the `doorlock` cluster as an example. Complete
the following steps:
1. Start the CHIP Tool in [interactive mode](#interactive-mode) by running the
following command:
```
$ ./chiptool interactive start
```
All of the commands that follow will be executed in the interactive mode
(`>>>`).
1. Run the following command to display all the available attributes you can
subscribe to for the given `<cluster-name>`:
```
>>> <cluster-name> subscribe
```
The list of all available attributes for the cluster will appears.
> **Note:** Your accessory might not support all of these attributes. You
> will get an error if the controller sends an unsupported attribute.
For example, for the door lock cluster:
```bash
>>> doorlock subscribe
```
The following list will appear:
```
+-------------------------------------------------------------------------------------+
| Attributes: |
+-------------------------------------------------------------------------------------+
| * lock-state |
| * lock-type |
| * actuator-enabled |
| * door-state |
| * door-open-events |
| * door-closed-events |
| * open-period |
| * number-of-total-users-supported |
| * number-of-pinusers-supported |
| * number-of-rfidusers-supported |
| * number-of-week-day-schedules-supported-per-user |
| * number-of-year-day-schedules-supported-per-user |
| * number-of-holiday-schedules-supported |
| * max-pincode-length |
| * min-pincode-length |
| * max-rfidcode-length |
| * min-rfidcode-length |
| * credential-rules-support |
| * number-of-credentials-supported-per-user |
| * language |
| * ledsettings |
| * auto-relock-time |
| * sound-volume |
| * operating-mode |
| * supported-operating-modes |
| * default-configuration-register |
| * enable-local-programming |
| * enable-one-touch-locking |
| * enable-inside-status-led |
| * enable-privacy-mode-button |
| * local-programming-features |
| * wrong-code-entry-limit |
| * user-code-temporary-disable-time |
| * send-pinover-the-air |
| * require-pinfor-remote-operation |
| * expiring-user-timeout |
| * generated-command-list |
| * accepted-command-list |
| * event-list |
| * attribute-list |
| * feature-map |
| * cluster-revision |
+-------------------------------------------------------------------------------------+
```
1. Add the argument of your choice to the subscription command, using the
following pattern:
```bash
>>> <cluster-name> subscribe <argument> <min-interval> <max-interval> <node_id> <endpoint_id>
```
In this command:
- _<cluster-name\>_ is the name of the cluster.
- _<argument\>_ is the name of the chosen argument.
- _<min-interval\>_ specifies the minimum number of seconds that must elapse
since the last report for the server to send a new report.
- _<max-interval\>_ specifies the number of seconds that must elapse since
the last report for the server to send a new report.
- _<node-id\>_ is the user-defined ID of the commissioned node.
- _<endpoint_id\>_ is the ID of the endpoint where the chosen cluster is
implemented.
For example:
```bash
>>> doorlock subscribe lock-state 5 10 1 1
```
After this command is run, the CHIP Tool will check the state of the door lock
every time it changes (for example, as a result of a button press or an external
ecosystem action) and update it in its own records.
#### Subscribing to an event
The procedure for subscribing to an event is similar to
[subscribing to an attribute](#subscribing-to-an-attribute).
The following procedure will use the `doorlock` cluster as an example. Complete
the following steps:
1. Start the CHIP Tool in [interactive mode](#interactive-mode) by running the
following command:
```
$ ./chiptool interactive start
```
All of the commands that follow will be executed in the interactive mode
(`>>>`).
1. Run the following command to display all the available events you can
subscribe to for the given `<cluster-name>`:
```
>>> <cluster-name> subscribe-event
```
The list of all available events for the cluster will appears.
> **Note:** Your accessory might not support all of these events. You will
> get an error if the controller sends an unsupported event.
For example, for the door lock cluster:
```bash
>>> doorlock subscribe-event
```
The following list will appear:
```
+-------------------------------------------------------------------------------------+
| Events: |
+-------------------------------------------------------------------------------------+
| * door-lock-alarm |
| * door-state-change |
| * lock-operation |
| * lock-operation-error |
| * lock-user-change |
+-------------------------------------------------------------------------------------+
```
1. Add the event of your choice to the subscription command, using the following
pattern:
```bash
>>> <cluster-name> subscribe-event <event-name> <min-interval> <max-interval> <node_id> <endpoint_id>
```
In this command:
- _<cluster-name\>_ is the name of the cluster.
- _<event-name\>_ is the name of the chosen event.
- _<min-interval\>_ specifies the minimum number of seconds that must elapse
since the last report for the server to send a new report.
- _<max-interval\>_ specifies the number of seconds that must elapse since
the last report for the server to send a new report.
- _<node_id\>_ is the user-defined ID of the commissioned node.
- _<endpoint_id\>_ is the ID of the endpoint where the chosen cluster is
implemented.
For example:
```bash
>>> doorlock subscribe-event door-lock-alarm 5 10 1 1
```
After this command is run, the CHIP Tool will check the state of the door lock
every time it changes (for example, as a result of a button press or an external
ecosystem action) and update it in its own records.
#### Subscribing using attribute ID or event ID
You can also use the following commands instead of `subscribe` to subscribe
using the attribute ID or the event ID:
- `subscribe-by-id`
- `subscribe-event-by-id`
The steps are the same as for the `subscribe` or `subscribe-event` commands.

0 comments on commit 1543590

Please sign in to comment.