Reset the wrong code retry attempts if a valid credential is presented

- Provide a ResetWrongCodeEntryAttempts for apps to use to reset the wrong entry attempts

- Update DL_LockUnlock.yaml to test resetting the wrong code retry attempts

src/app/clusters/door-lock-server/door-lock-server.cpp

@@ -122,6 +122,12 @@ bool DoorLockServer::SetLockState(chip::EndpointId endpointId, DlLockState newLo
     SendLockOperationEvent(endpointId, opType, opSource, OperationErrorEnum::kUnspecified, userIndex, Nullable<chip::FabricIndex>(),
                            Nullable<chip::NodeId>(), credentials, success);
 
+    // Reset code wrong entry attempts (in case there were any incorrect wrong code retries prior) since lock/unlock was a success
+    // and a valid credential was presented
+    if (success && !credentials.IsNull() && !(credentials.Value().empty())) {
+        ResetWrongCodeEntryAttempts(endpointId);
+    }
+
     // Schedule auto-relocking
     if (success && LockOperationTypeEnum::kUnlock == opType)
     {
@@ -181,7 +187,7 @@ bool DoorLockServer::SetPrivacyModeButton(chip::EndpointId endpointId, bool isEn
     return SetAttribute(endpointId, Attributes::EnablePrivacyModeButton::Id, Attributes::EnablePrivacyModeButton::Set, isEnabled);
 }
 
-bool DoorLockServer::TrackWrongCodeEntry(chip::EndpointId endpointId)
+bool DoorLockServer::HandleWrongCodeEntry(chip::EndpointId endpointId)
 {
     auto endpointContext = getContext(endpointId);
     if (nullptr == endpointContext)
@@ -209,6 +215,17 @@ bool DoorLockServer::TrackWrongCodeEntry(chip::EndpointId endpointId)
     return true;
 }
 
+void DoorLockServer::ResetWrongCodeEntryAttempts(chip::EndpointId endpointId)
+{
+	auto endpointContext = getContext(endpointId);
+	if (nullptr == endpointContext)
+	{
+		ChipLogError(Zcl, "Failed to reset wrong code entry attempts. No context for endpoint %d", endpointId);
+		return;
+	}
+	endpointContext->wrongCodeEntryAttempts = 0;
+}
+
 bool DoorLockServer::engageLockout(chip::EndpointId endpointId)
 {
     uint8_t lockoutTimeout;
@@ -3352,7 +3369,13 @@ bool DoorLockServer::HandleRemoteLockOperation(chip::app::CommandHandler * comma
 exit:
     if (!success && reason == OperationErrorEnum::kInvalidCredential)
     {
-        TrackWrongCodeEntry(endpoint);
+        HandleWrongCodeEntry(endpoint);
+    }
+
+    // Reset the wrong code retry attempts if a valid credential is presented during lock/unlock
+    if ((opType == LockOperationTypeEnum::kUnlock || opType == LockOperationTypeEnum::kLock) && success && pinCode.HasValue())
+    {
+        ResetWrongCodeEntryAttempts(endpoint);
     }
 
     // Send command response

src/app/clusters/door-lock-server/door-lock-server.h

@@ -121,7 +121,16 @@ class DoorLockServer
     bool SetOneTouchLocking(chip::EndpointId endpointId, bool isEnabled);
     bool SetPrivacyModeButton(chip::EndpointId endpointId, bool isEnabled);
 
-    bool TrackWrongCodeEntry(chip::EndpointId endpointId);
+    /**
+     * @brief Handles a wrong code entry attempt for the endpoint. If the number of wrong entry attempts exceeds the max limit,
+     *        engage lockout. Otherwise increment the number of incorrect attempts by 1. This is handled automatically for
+     *        remote operations - lock and unlock . Any app that uses SetLockState or sends lock/unlock events via SendLockOperationEvent
+     *        has to handle tracking of wrong retry attempts and needs to call this API to update the wrong entry attempt count
+     *        or engage lockoutif retry limit is exceeded.
+     *
+     * @param endpointId
+     */
+    bool HandleWrongCodeEntry(chip::EndpointId endpointId);
 
     bool GetAutoRelockTime(chip::EndpointId endpointId, uint32_t & autoRelockTime);
     bool GetNumberOfUserSupported(chip::EndpointId endpointId, uint16_t & numberOfUsersSupported);
@@ -183,6 +192,16 @@ class DoorLockServer
     bool OnFabricRemoved(chip::EndpointId endpointId, chip::FabricIndex fabricIndex);
 
     static void DoorLockOnAutoRelockCallback(chip::System::Layer *, void * callbackContext);
+    /**
+     * @brief Resets the wrong code entry attempts to 0 for the endpoint. This API is called from HandleRemoteLockOperation
+     *        to reset the count if we have an lock/unlock remote operation with valid credential automatically. An app that
+     *        calls SetLockState also will have this done automatically on successful unlock operation using valid credential.
+     *        Any app that sends unlock events via SendLockOperationEvent has to handle resetting the wrong retry count by
+     *        calling this API.
+     *
+     * @param endpointId
+     */
+    void ResetWrongCodeEntryAttempts(chip::EndpointId endpointId);
 
 private:
     chip::FabricIndex getFabricIndex(const chip::app::CommandHandler * commandObj);

src/app/tests/suites/DL_LockUnlock.yaml

@@ -238,11 +238,11 @@ tests:
       arguments:
           value: 0
 
-    - label: "Read the lockout timeout"
-      command: "readAttribute"
-      attribute: "UserCodeTemporaryDisableTime"
-      response:
-          value: 10
+    # Test resetting wrong code entry retry attempts
+    # Set the retry limit to 3. Try to unlock with incorrect PIN 2 times followed by a third time
+    # with correct PIN code. The retry attempts should be reset to 0. Try to unock with incorrect
+    # PIN 2 times followed by a third time with correct PIN code. We should be able to unlock since
+    # the count has been reset and we are not in lockout.
 
     - label: "Set the WrongCodeEntryLimit to small value so we can test lockout"
       command: "writeAttribute"
@@ -270,7 +270,98 @@ tests:
       response:
           error: FAILURE
 
-    - label: "Try to unlock the door with invalid PIN for the third time"
+    - label: "Try to unlock the door with valid PIN for the third time"
+      command: "UnlockDoor"
+      timedInteractionTimeoutMs: 10000
+      arguments:
+          values:
+              - name: "PINCode"
+                value: "123456"
+
+    - label: "Verify that lock state attribute value is set to Unlocked"
+      command: "readAttribute"
+      attribute: "LockState"
+      response:
+          value: 2
+
+    - label: "Try to unlock the door with invalid PIN for the first time"
+      command: "UnlockDoor"
+      timedInteractionTimeoutMs: 10000
+      arguments:
+          values:
+              - name: "PINCode"
+                value: "000000"
+      response:
+          error: FAILURE
+
+    - label: "Try to unlock the door with invalid PIN for the second time"
+      command: "UnlockDoor"
+      timedInteractionTimeoutMs: 10000
+      arguments:
+          values:
+              - name: "PINCode"
+                value: "000000"
+      response:
+          error: FAILURE
+
+    - label: "Try to unlock the door with valid PIN for the third time"
+      command: "UnlockDoor"
+      timedInteractionTimeoutMs: 10000
+      arguments:
+          values:
+              - name: "PINCode"
+                value: "123456"
+
+    - label: "Verify that lock state attribute value is set to Unlocked"
+      command: "readAttribute"
+      attribute: "LockState"
+      response:
+          value: 2
+
+    - label: "Lock the door back prior to next tests"
+      command: "LockDoor"
+      timedInteractionTimeoutMs: 10000
+      arguments:
+          values:
+              - name: "PINCode"
+                value: "123456"
+
+    - label: "Verify that lock state attribute value is set to Locked"
+      command: "readAttribute"
+      attribute: "LockState"
+      response:
+          value: 1
+
+    - label: "Read the lockout timeout"
+      command: "readAttribute"
+      attribute: "UserCodeTemporaryDisableTime"
+      response:
+          value: 10
+
+    - label:
+          "Try to unlock the door with invalid PIN for the first time"
+      command: "UnlockDoor"
+      timedInteractionTimeoutMs: 10000
+      arguments:
+          values:
+              - name: "PINCode"
+                value: "000000"
+      response:
+          error: FAILURE
+
+    - label:
+          "Try to unlock the door with invalid PIN for the second time"
+      command: "UnlockDoor"
+      timedInteractionTimeoutMs: 10000
+      arguments:
+          values:
+              - name: "PINCode"
+                value: "000000"
+      response:
+          error: FAILURE
+
+    - label:
+          "Try to unlock the door with invalid PIN for the third time"
       command: "UnlockDoor"
       timedInteractionTimeoutMs: 10000
       arguments: