Update following change in the support for the StartUpMode attribute for the RVC device type #81735

Workflow file for this run

	# Copyright (c) 2020-2021 Project CHIP Authors
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.

	name: Builds

	on:
	push:
	pull_request:
	merge_group:
	workflow_dispatch:
	workflow_call:
	inputs:
	run-codeql:
	required: false
	type: boolean

	concurrency:
	group: ${{ github.ref }}-${{ github.workflow }}-${{ (github.event_name == 'pull_request' && github.event.number) \|\| (github.event_name == 'workflow_dispatch' && github.run_number) \|\| github.sha }}
	cancel-in-progress: true

	env:
	CHIP_NO_LOG_TIMESTAMPS: true

	jobs:
	build_linux_gcc_debug:
	name: Build on Linux (gcc_debug)

	runs-on: ubuntu-latest
	if: github.actor != 'restyled-io[bot]'

	container:
	image: ghcr.io/project-chip/chip-build:21
	volumes:
	- "/tmp/log_output:/tmp/test_logs"
	options: --privileged --sysctl "net.ipv6.conf.all.disable_ipv6=0
	net.ipv4.conf.all.forwarding=1 net.ipv6.conf.all.forwarding=1"

	steps:
	- name: Dump GitHub context
	env:
	GITHUB_CONTEXT: ${{ toJSON(github) }}
	run: echo "$GITHUB_CONTEXT"
	- name: Dump Concurrency context
	env:
	CONCURRENCY_CONTEXT: ${{ github.ref }}-${{ github.workflow }}-${{ (github.event_name == 'pull_request' && github.event.number) \|\| (github.event_name == 'workflow_dispatch' && github.run_number) \|\| github.sha }}
	run: echo "$CONCURRENCY_CONTEXT"
	- name: Checkout
	uses: actions/checkout@v4
	- name: Try to ensure the directories for core dumping exist and we
	can write them.
	run: \|
	mkdir /tmp/cores \|\| true
	sysctl -w kernel.core_pattern=/tmp/cores/core.%u.%p.%t \|\| true
	- name: Checkout submodules & Bootstrap
	uses: ./.github/actions/checkout-submodules-and-bootstrap
	with:
	platform: linux
	- name: Initialize CodeQL
	if: ${{ inputs.run-codeql }}
	uses: github/codeql-action/init@v2
	with:
	languages: "cpp"
	- name: Setup Build
	run: scripts/build/gn_gen.sh --args="chip_config_memory_debug_checks=true chip_config_memory_debug_dmalloc=false"
	- name: Run Build
	run: scripts/run_in_build_env.sh "ninja -C ./out"
	- name: Run Tests
	run: scripts/tests/gn_tests.sh
	# TODO Log Upload https://github.com/project-chip/connectedhomeip/issues/2227
	# TODO https://github.com/project-chip/connectedhomeip/issues/1512
	# - name: Run Code Coverage
	# if: ${{ contains('main', env.BUILD_TYPE) }}
	# run: scripts/tools/codecoverage.sh
	# - name: Upload Code Coverage
	# if: ${{ contains('main', env.BUILD_TYPE) }}
	# run: bash <(curl -s https://codecov.io/bash)
	- name: Setup Build Without Detail Logging
	run: scripts/build/gn_gen.sh --args="chip_detail_logging=false"
	- name: Run Build Without Detail Logging
	run: scripts/run_in_build_env.sh "ninja -C ./out"
	- name: Setup Build Without Progress Logging
	run: scripts/build/gn_gen.sh --args="chip_detail_logging=false chip_progress_logging=false"
	- name: Run Build Without Progress Logging
	run: scripts/run_in_build_env.sh "ninja -C ./out"
	- name: Setup Build Without Error Logging
	run: scripts/build/gn_gen.sh --args="chip_detail_logging=false chip_progress_logging=false chip_error_logging=false"
	- name: Run Build Without Error Logging
	run: scripts/run_in_build_env.sh "ninja -C ./out"
	- name: Uploading core files
	uses: actions/upload-artifact@v3
	if: ${{ failure() && !env.ACT }}
	with:
	name: crash-core-linux-gcc-debug
	path: /tmp/cores/
	# Cores are big; don't hold on to them too long.
	retention-days: 5
	- name: Perform CodeQL Analysis
	if: ${{ inputs.run-codeql }}
	uses: ./.github/actions/perform-codeql-analysis
	with:
	language: cpp
	# OBJDIR on linux is > 10K files and takes more than 50 minutes to upload, usually
	# having the job timeout.
	#
	# If re-enabling, some subset of this should be picked
	#
	# - name: Uploading objdir for debugging
	# uses: actions/upload-artifact@v3
	# if: ${{ failure() && !env.ACT }}
	# with:
	# name: crash-objdir-linux-gcc-debug
	# path: out/
	# # objdirs are big; don't hold on to them too long.
	# retention-days: 5

	build_linux:
	name: Build on Linux (fake, gcc_release, clang, simulated)

	runs-on: ubuntu-latest
	if: github.actor != 'restyled-io[bot]'

	container:
	image: ghcr.io/project-chip/chip-build:21
	volumes:
	- "/tmp/log_output:/tmp/test_logs"
	options: --privileged --sysctl "net.ipv6.conf.all.disable_ipv6=0
	net.ipv4.conf.all.forwarding=1 net.ipv6.conf.all.forwarding=1"

	steps:
	- name: Dump GitHub context
	env:
	GITHUB_CONTEXT: ${{ toJSON(github) }}
	run: echo "$GITHUB_CONTEXT"
	- name: Dump Concurrency context
	env:
	CONCURRENCY_CONTEXT: ${{ github.ref }}-${{ github.workflow }}-${{ (github.event_name == 'pull_request' && github.event.number) \|\| (github.event_name == 'workflow_dispatch' && github.run_number) \|\| github.sha }}
	run: echo "$CONCURRENCY_CONTEXT"
	- name: Checkout
	uses: actions/checkout@v4
	- name: Try to ensure the directories for core dumping exist and we
	can write them.
	run: \|
	mkdir /tmp/cores \|\| true
	sysctl -w kernel.core_pattern=/tmp/cores/core.%u.%p.%t \|\| true
	- name: Checkout submodules & Bootstrap
	uses: ./.github/actions/checkout-submodules-and-bootstrap
	with:
	platform: linux
	- name: Initialize CodeQL
	if: ${{ inputs.run-codeql }}
	uses: github/codeql-action/init@v2
	with:
	languages: "cpp"
	- name: Setup and Build Simulated Device
	run: \|
	BUILD_TYPE=simulated
	GN_ARGS='chip_tests_zap_config="app1" chip_project_config_include_dirs=["../../examples/placeholder/linux/apps/app1/include", "../../config/standalone"] chip_config_network_layer_ble=false'
	CHIP_ROOT_PATH=examples/placeholder/linux
	CHIP_ROOT_PATH="$CHIP_ROOT_PATH" BUILD_TYPE="$BUILD_TYPE" scripts/build/gn_gen.sh --args="$GN_ARGS"
	scripts/run_in_build_env.sh "ninja -C ./out/$BUILD_TYPE"
	- name: Setup Build, Run Build and Run Tests
	run: \|
	BUILD_TYPE=gcc_release scripts/build/gn_gen.sh --args="is_debug=false"
	scripts/run_in_build_env.sh "ninja -C ./out/gcc_release"
	BUILD_TYPE=gcc_release scripts/tests/gn_tests.sh
	- name: Clean output
	run: rm -rf ./out
	- name: Run Tests with sanitizers
	env:
	LSAN_OPTIONS: detect_leaks=1
	run: \|
	for BUILD_TYPE in asan tsan ubsan; do
	case $BUILD_TYPE in
	"asan") GN_ARGS='is_clang=true is_asan=true';;
	"msan") GN_ARGS='is_clang=true is_msan=true';;
	"tsan") GN_ARGS='is_clang=true is_tsan=true chip_enable_wifi=false';;
	"ubsan") GN_ARGS='is_clang=true is_ubsan=true';;
	esac

	rm -rf ./out/sanitizers
	BUILD_TYPE=sanitizers scripts/build/gn_gen.sh --args="$GN_ARGS" --export-compile-commands
	BUILD_TYPE=sanitizers scripts/tests/gn_tests.sh
	done
	- name: Ensure codegen is done for sanitize
	run: \|
	./scripts/run_in_build_env.sh "./scripts/run_codegen_targets.sh out/sanitizers"
	- name: Clang-tidy validation
	run: \|
	./scripts/run_in_build_env.sh \
	"./scripts/run-clang-tidy-on-compile-commands.py \
	--compile-database out/sanitizers/compile_commands.json \
	--file-exclude-regex '/(repo\|zzz_generated\|lwip/standalone)/\|-ReadImpl\|-InvokeSubscribeImpl' \
	check \
	"
	- name: Clean output
	run: rm -rf ./out
	- name: Build using build_examples.py
	run: \|
	./scripts/run_in_build_env.sh \
	"./scripts/build/build_examples.py \
	--target linux-x64-minmdns-ipv6only-clang \
	--target linux-x64-rpc-console \
	build \
	"
	- name: Create a pre-generate directory and ensure compile-time codegen would fail
	run: \|
	./scripts/run_in_build_env.sh "./scripts/codepregen.py ./zzz_pregenerated"
	mv scripts/codegen.py scripts/codegen.py.renamed
	- name: Clean output
	run: rm -rf ./out
	- name: Build using build_examples.py (pregen)
	run: \|
	./scripts/run_in_build_env.sh \
	"./scripts/build/build_examples.py \
	--target linux-x64-all-clusters-ipv6only-clang \
	--target linux-x64-chip-tool-ipv6only-clang \
	--pregen-dir ./zzz_pregenerated \
	build \
	"
	- name: Check no code generation in output
	run: \|
	CNT=$(find out -name "CHIPClusters.h" \| wc -l)
	if [ "${CNT}" != "0" ]; then
	echo "ERROR: found unexpected generated files:"
	find out -name "CHIPClusters.h"
	exit 1
	fi
	- name: Undo code pre-generation changes (make compile time codegen work again)
	run: \|
	rm -rf ./zzz_pregenerated
	mv scripts/codegen.py.renamed scripts/codegen.py
	- name: Run fake linux tests with build_examples
	run: \|
	./scripts/run_in_build_env.sh \
	"./scripts/build/build_examples.py --target linux-fake-tests build"
	- name: Perform CodeQL Analysis
	if: ${{ inputs.run-codeql }}
	uses: ./.github/actions/perform-codeql-analysis
	with:
	language: cpp

	- name: Uploading core files
	uses: actions/upload-artifact@v3
	if: ${{ failure() && !env.ACT }}
	with:
	name: crash-core-linux
	path: /tmp/cores/
	# Cores are big; don't hold on to them too long.
	retention-days: 5
	# OBJDIR on linux is > 10K files and takes more than 50 minutes to upload, usually
	# having the job timeout.
	#
	# If re-enabling, some subset of this should be picked
	#
	# - name: Uploading objdir for debugging
	# uses: actions/upload-artifact@v3
	# if: ${{ failure() && !env.ACT }}
	# with:
	# name: crash-objdir-linux
	# path: out/
	# # objdirs are big; don't hold on to them too long.
	# retention-days: 5

	build_linux_python_lib:
	name: Build on Linux (python_lib)

	runs-on: ubuntu-latest
	if: github.actor != 'restyled-io[bot]'

	container:
	image: ghcr.io/project-chip/chip-build:21
	volumes:
	- "/tmp/log_output:/tmp/test_logs"
	options: --sysctl "net.ipv6.conf.all.disable_ipv6=0
	net.ipv4.conf.all.forwarding=1 net.ipv6.conf.all.forwarding=1"

	steps:
	- name: Dump GitHub context
	env:
	GITHUB_CONTEXT: ${{ toJSON(github) }}
	run: echo "$GITHUB_CONTEXT"
	- name: Dump Concurrency context
	env:
	CONCURRENCY_CONTEXT: ${{ github.ref }}-${{ github.workflow }}-${{ (github.event_name == 'pull_request' && github.event.number) \|\| (github.event_name == 'workflow_dispatch' && github.run_number) \|\| github.sha }}
	run: echo "$CONCURRENCY_CONTEXT"
	- name: Checkout
	uses: actions/checkout@v4
	- name: Checkout submodules & Bootstrap
	uses: ./.github/actions/checkout-submodules-and-bootstrap
	with:
	platform: linux

	- name: Setup Build, Run Build and Run Tests
	run: \|
	scripts/build/gn_gen.sh --args="enable_rtti=true enable_pylib=true chip_config_memory_debug_checks=false chip_config_memory_debug_dmalloc=false chip_generate_link_map_file=false"
	scripts/run_in_build_env.sh "ninja -C ./out"
	scripts/tests/gn_tests.sh
	- name: Setup test python environment
	shell: bash
	run: \|
	scripts/run_in_build_env.sh 'virtualenv pyenv'
	source pyenv/bin/activate
	pip3 install ./out/controller/python/chip_core-0.0-cp37-abi3-linux_x86_64.whl
	pip3 install ./out/controller/python/chip_clusters-0.0-py3-none-any.whl
	pip3 install ./out/controller/python/chip_repl-0.0-py3-none-any.whl

	- name: Run Python tests
	shell: bash
	run: \|
	source pyenv/bin/activate
	cd src/controller/python/test/unit_tests/
	python3 -m unittest -v
	- name: Clean previous outputs
	run: rm -rf out pyenv
	- name: Run Python Setup Payload Generator Test
	shell: bash
	run: \|
	scripts/run_in_build_env.sh 'scripts/examples/gn_build_example.sh examples/chip-tool out/'
	scripts/run_in_build_env.sh 'virtualenv pyenv'
	source pyenv/bin/activate
	pip3 install -r src/setup_payload/python/requirements.txt
	python3 src/setup_payload/tests/run_python_setup_payload_gen_test.py out/chip-tool

	build_darwin:
	name: Build on Darwin (clang, python_lib, simulated)
	runs-on: macos-latest
	if: github.actor != 'restyled-io[bot]'

	steps:
	- name: Checkout
	uses: actions/checkout@v4
	- name: Checkout submodules & Bootstrap
	uses: ./.github/actions/checkout-submodules-and-bootstrap
	with:
	platform: darwin
	- name: Try to ensure the directory for diagnostic log collection exists
	run: \|
	mkdir -p ~/Library/Logs/DiagnosticReports \|\| true
	- name: Initialize CodeQL
	if: ${{ inputs.run-codeql }}
	uses: github/codeql-action/init@v2
	with:
	languages: "cpp"

	- name: Setup and Build Simulated Device
	run: \|
	BUILD_TYPE=simulated
	GN_ARGS='chip_tests_zap_config="app1" chip_project_config_include_dirs=["../../examples/placeholder/linux/apps/app1/include", "../../config/standalone"] chip_config_network_layer_ble=false'
	CHIP_ROOT_PATH=examples/placeholder/linux
	CHIP_ROOT_PATH="$CHIP_ROOT_PATH" BUILD_TYPE="$BUILD_TYPE" scripts/build/gn_gen.sh --args="$GN_ARGS"
	scripts/run_in_build_env.sh "ninja -C ./out/$BUILD_TYPE"
	- name: Setup Build, Run Build and Run Tests
	# We can't enable leak checking here in LSAN_OPTIONS, because on
	# Darwin that's only supported with a new enough clang, and we're
	# not building with the pigweed clang here.
	run: \|
	for BUILD_TYPE in default python_lib; do
	case $BUILD_TYPE in
	# We want to build various standalone example apps
	# (similar to what examples-linux-standalone.yaml
	# does), so use target_os="all" to get those picked
	# up as part of the "unified" build. But then to
	# save CI resources we want to exclude the
	# "host clang" build, which uses the pigweed
	# clang.
	"default") GN_ARGS='target_os="all" is_asan=true enable_host_clang_build=false';;
	"python_lib") GN_ARGS='enable_rtti=true enable_pylib=true';;
	esac
	BUILD_TYPE=$BUILD_TYPE scripts/build/gn_gen.sh --args="$GN_ARGS" --export-compile-commands
	scripts/run_in_build_env.sh "ninja -C ./out/$BUILD_TYPE"
	BUILD_TYPE=$BUILD_TYPE scripts/tests/gn_tests.sh
	done
	- name: Ensure codegen is done for sanitize
	run: \|
	./scripts/run_in_build_env.sh "./scripts/run_codegen_targets.sh out/default"
	- name: Clang-tidy validation
	run: \|
	./scripts/run_in_build_env.sh \
	"./scripts/run-clang-tidy-on-compile-commands.py \
	--compile-database out/default/compile_commands.json \
	check \
	"
	- name: Uploading diagnostic logs
	uses: actions/upload-artifact@v3
	if: ${{ failure() && !env.ACT }}
	with:
	name: crash-log-darwin
	path: ~/Library/Logs/DiagnosticReports/

	- name: Perform CodeQL Analysis
	if: ${{ inputs.run-codeql }}
	uses: ./.github/actions/perform-codeql-analysis
	with:
	language: cpp

	# TODO Log Upload https://github.com/project-chip/connectedhomeip/issues/2227
	# TODO https://github.com/project-chip/connectedhomeip/issues/1512

	build_linux_gcc_coverage:
	name: Build on Linux (coverage)

	runs-on: ubuntu-latest
	if: github.actor != 'restyled-io[bot]'

	container:
	image: ghcr.io/project-chip/chip-build:21
	volumes:
	- "/tmp/log_output:/tmp/test_logs"
	options: --privileged --sysctl "net.ipv6.conf.all.disable_ipv6=0
	net.ipv4.conf.all.forwarding=1 net.ipv6.conf.all.forwarding=1"

	steps:
	- name: Checkout
	uses: actions/checkout@v4
	- name: Checkout submodules & Bootstrap
	uses: ./.github/actions/checkout-submodules-and-bootstrap
	with:
	platform: linux

	- name: Run Build Coverage
	run: ./scripts/build_coverage.sh

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Update following change in the support for the StartUpMode attribute for the RVC device type #81735

Workflow file

Update following change in the support for the StartUpMode attribute for the RVC device type #81735

Jobs

Run details

Workflow file for this run