Soapy SDR plugin for Radioberry

Soapy SDR plugin for Radioberry

The Soapy Radioberry project provides a plugin module to use the Radioberry device within the SoapySDR API and software that supports SoapySDR.

Radioberry table of contents

• Installers
• Dependencies
• Building Soapy Radioberry
• Probing Soapy Radioberry

Installers

Pre-built installers for various systems are available through the Pothos SDR environment.

• https://github.com/pothosware/PothosCore/wiki/Downloads

Dependencies

• Install SoapySDR: https://github.com/pothosware/SoapySDR/wiki

Building Soapy Radioberry

The CMake build system will locate SoapySDR development files on your system. The plugin module will be built and installed into the SoapySDR modules directories.

git clone https://github.com/pa3gsb/Radioberry-2.x.git
cd Radioberry-2.x/SBC/rpi-4/SoapyRadioberrySDR
mkdir build
cd build
cmake ..
make -j4
sudo make install
sudo ldconfig

Probing Soapy Radioberry

SoapySDRUtil --probe="driver=radioberry"
######################################################
## Soapy SDR -- the SDR abstraction library
######################################################

Probe device driver=radioberry

      ----------------------------------------------------
      -- Device identification
      ----------------------------------------------------
        driver=radioberry
        hardware=v2.0-beta4
        firmwareVersion=0.1
        gatewareVersion=0.0
        hardwareVersion=2.4
        protocolVersion=1.58

      ----------------------------------------------------
      -- Peripheral summary
      ----------------------------------------------------
        Channels: 1 Rx, 1 Tx
        Timestamps: NO

      ----------------------------------------------------
      -- RX Channel 0
      ----------------------------------------------------
        Full-duplex: YES
        Supports AGC: NO
        Stream formats: CF32
        Native format: CF32 [full-scale=2048]
        Stream args:
               * Buffer Size - Number of bytes per buffer, multiples of 512 only.
                 [key=bufflen, units=bytes, default=64, type=int]
        Antennas: ANTENNA RX
        Full gain range: [0, 0] dB
        Full freq range: [0.01, 30] MHz
        Sample rates: [0.048, 0.192] MSps
        Filter bandwidths: 0.048, 0.096, 0.192 MHz

      ----------------------------------------------------
      -- TX Channel 0
      ----------------------------------------------------
        Full-duplex: YES
        Supports AGC: NO
        Stream formats: CF32
        Native format: CF32 [full-scale=32768]
        Stream args:
               * Buffer Size - Number of bytes per buffer, multiples of 512 only.
                 [key=bufflen, units=bytes, default=64, type=int]
        Antennas: ANTENNA TX
        Full gain range: [0, 0] dB
        Full freq range: [0.01, 30] MHz
        Sample rates: 0.048 MSps
        Filter bandwidths: 0.048 MHz