Linux 5.18.7 #160
Closed
Linux 5.18.7 #160
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ Upstream commit f4fd559 ] This reverts commit 830aa6f. This is part of a revert of the following commits: 11ed8b8 ("PCI: brcmstb: Do not turn off WOL regulators on suspend") 93e41f3 ("PCI: brcmstb: Add control of subdevice voltage regulators") 67211aa ("PCI: brcmstb: Add mechanism to turn on subdev regulators") 830aa6f ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs") Cyril reported that 830aa6f ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs"), which appeared in v5.17-rc1, broke booting on the Raspberry Pi Compute Module 4. Apparently 830aa6f panics with an Asynchronous SError Interrupt, and after further commits here is a black screen on HDMI and no output on the serial console. This does not seem to affect the Raspberry Pi 4 B. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925 Link: https://lore.kernel.org/r/[email protected] Reported-by: Cyril Brulebois <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit cc391b6 ] The srv_mutex is used during writeback so cifs should ensure that allocations done when that mutex is held are done with GFP_NOFS, to avoid having direct reclaim ending up waiting for the same mutex and causing a deadlock. This is detected by lockdep with the splat below: ====================================================== WARNING: possible circular locking dependency detected 5.18.0 #70 Not tainted ------------------------------------------------------ kswapd0/49 is trying to acquire lock: ffff8880195782e0 (&tcp_ses->srv_mutex){+.+.}-{3:3}, at: compound_send_recv but task is already holding lock: ffffffffa98e66c0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire kmem_cache_alloc_trace __request_module crypto_alg_mod_lookup crypto_alloc_tfm_node crypto_alloc_shash cifs_alloc_hash smb311_crypto_shash_allocate smb311_update_preauth_hash compound_send_recv cifs_send_recv SMB2_negotiate smb2_negotiate cifs_negotiate_protocol cifs_get_smb_ses cifs_mount cifs_smb3_do_mount smb3_get_tree vfs_get_tree path_mount __x64_sys_mount do_syscall_64 entry_SYSCALL_64_after_hwframe -> #0 (&tcp_ses->srv_mutex){+.+.}-{3:3}: __lock_acquire lock_acquire __mutex_lock mutex_lock_nested compound_send_recv cifs_send_recv SMB2_write smb2_sync_write cifs_write cifs_writepage_locked cifs_writepage shrink_page_list shrink_lruvec shrink_node balance_pgdat kswapd kthread ret_from_fork other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(&tcp_ses->srv_mutex); lock(fs_reclaim); lock(&tcp_ses->srv_mutex); *** DEADLOCK *** 1 lock held by kswapd0/49: #0: ffffffffa98e66c0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat stack backtrace: CPU: 2 PID: 49 Comm: kswapd0 Not tainted 5.18.0 #70 Call Trace: <TASK> dump_stack_lvl dump_stack print_circular_bug.cold check_noncircular __lock_acquire lock_acquire __mutex_lock mutex_lock_nested compound_send_recv cifs_send_recv SMB2_write smb2_sync_write cifs_write cifs_writepage_locked cifs_writepage shrink_page_list shrink_lruvec shrink_node balance_pgdat kswapd kthread ret_from_fork </TASK> Fix this by using the memalloc_nofs_save/restore APIs around the places where the srv_mutex is held. Do this in a wrapper function for the lock/unlock of the srv_mutex, and rename the srv_mutex to avoid missing call sites in the conversion. Note that there is another lockdep warning involving internal crypto locks, which was masked by this problem and is visible after this fix, see the discussion in this thread: https://lore.kernel.org/all/[email protected]/ Link: https://lore.kernel.org/r/CANT5p=rqcYfYMVHirqvdnnca4Mo+JQSw5Qu12v=kPfpk5yhhmg@mail.gmail.com/ Reported-by: Shyam Prasad N <[email protected]> Suggested-by: Lars Persson <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]> Reviewed-by: Enzo Matsumiya <[email protected]> Signed-off-by: Vincent Whitchurch <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 6d59462 ] With large and many guest with storage keys it is possible to create large latencies or stalls during initial key setting: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 18-....: (2099 ticks this GP) idle=54e/1/0x4000000000000002 softirq=35598716/35598716 fqs=998 (t=2100 jiffies g=155867385 q=20879) Task dump for CPU 18: CPU 1/KVM R running task 0 1030947 256019 0x06000004 Call Trace: sched_show_task rcu_dump_cpu_stacks rcu_sched_clock_irq update_process_times tick_sched_handle tick_sched_timer __hrtimer_run_queues hrtimer_interrupt do_IRQ ext_int_handler ptep_zap_key The mmap lock is held during the page walking but since this is a semaphore scheduling is still possible. Same for the kvm srcu. To minimize overhead do this on every segment table entry or large page. Signed-off-by: Christian Borntraeger <[email protected]> Reviewed-by: Alexander Gordeev <[email protected]> Reviewed-by: Claudio Imbrenda <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Borntraeger <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 7ef93ff ] We should not be including unused smb20 specific code when legacy support is disabled (CONFIG_CIFS_ALLOW_INSECURE_LEGACY turned off). For example smb2_operations and smb2_values aren't used in that case. Over time we can move more and more SMB1/CIFS and SMB2.0 code into the insecure legacy ifdefs Reviewed-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 525d651 ] The smu_v1X_0_set_allowed_mask() uses bitmap_copy() to convert bitmap to 32-bit array. This may be wrong due to endiannes issues. Fix it by switching to bitmap_{from,to}_arr32. CC: Alexander Gordeev <[email protected]> CC: Andy Shevchenko <[email protected]> CC: Christian Borntraeger <[email protected]> CC: Claudio Imbrenda <[email protected]> CC: David Hildenbrand <[email protected]> CC: Heiko Carstens <[email protected]> CC: Janosch Frank <[email protected]> CC: Rasmus Villemoes <[email protected]> CC: Sven Schnelle <[email protected]> CC: Vasily Gorbik <[email protected]> Signed-off-by: Yury Norov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 0dfe540 ] The nodemask routines had mixed return values that provided potentially signed return values that could never happen. This was leading to the compiler getting confusing about the range of possible return values (it was thinking things could be negative where they could not be). Fix all the nodemask routines that should be returning unsigned (or bool) values. Silences: mm/swapfile.c: In function ‘setup_swap_info’: mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds of ‘struct plist_node[]’ [-Werror=array-bounds] 2291 | p->avail_lists[i].prio = 1; | ~~~~~~~~~~~~~~^~~ In file included from mm/swapfile.c:16: ./include/linux/swap.h:292:27: note: while referencing ‘avail_lists’ 292 | struct plist_node avail_lists[]; /* | ^~~~~~~~~~~ Reported-by: Christophe de Dinechin <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/ Cc: Alexey Dobriyan <[email protected]> Cc: Yury Norov <[email protected]> Cc: Andy Shevchenko <[email protected]> Cc: Rasmus Villemoes <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Zhen Lei <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Yury Norov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
…nt() [ Upstream commit 44ba978 ] A previous commit assumed all XMIT_SEQ64_WQEs are prepped with the correct BDE type in word 0-2. However, lpfc_ct_reject_event() routine was missed and is still filling out the incorrect BDE type. Fix lpfc_ct_reject_event() routine so that type BUFF_TYPE_BDE_64 is set instead of BUFF_TYPE_BLP_64. Link: https://lore.kernel.org/r/[email protected] Fixes: 596fc8a ("scsi: lpfc: Fix dmabuf ptr assignment in lpfc_ct_reject_event()") Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit dbd29e0 ] We should use size of descriptor chain to test loop condition in the indirect case. And another statistical count is also introduced for indirect descriptors to avoid conflict with the statistical count of direct descriptors. Fixes: f87d0fb ("vringh: host-side implementation of virtio rings.") Signed-off-by: Xie Yongji <[email protected]> Signed-off-by: Fam Zheng <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 011881b ] As platform_driver_register() could fail, it should be better to deal with the return value in order to maintain the code consisitency. Fixes: 86af1d0 ("platform/x86: Support for EC-connected GPIOs for identify LED/button on Barco P50 board") Signed-off-by: Jiasheng Jiang <[email protected]> Acked-by: Peter Korsgaard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 1f7a6cf ] MAGIC_START("IKCFG_ST") and MAGIC_END("IKCFG_ED") are moved out from the kernel_config_data variable. Thus, we parse kernel_config_data directly instead of considering offset of MAGIC_START and MAGIC_END. Fixes: 13610aa ("kernel/configs: use .incbin directive to embed config_data.gz") Signed-off-by: Kuan-Ying Lee <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit dc6a6ab ] WMI queries fail on some devices where the ACPI method HWMC unconditionally attempts to create Fields beyond the buffer if the buffer is too small, this breaks essential features such as power profiles: CreateByteField (Arg1, 0x10, D008) CreateByteField (Arg1, 0x11, D009) CreateByteField (Arg1, 0x12, D010) CreateDWordField (Arg1, 0x10, D032) CreateField (Arg1, 0x80, 0x0400, D128) In cases where args->data had zero length, ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D008] at bit offset/length 128/8 exceeds size of target Buffer (128 bits) (20211217/dsopcode-198) was obtained. ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D009] at bit offset/length 136/8 exceeds size of target Buffer (136bits) (20211217/dsopcode-198) The original code created a buffer size of 128 bytes regardless if the WMI call required a smaller buffer or not. This particular behavior occurs in older BIOS and reproduced in OMEN laptops. Newer BIOS handles buffer sizes properly and meets the latest specification requirements. This is the reason why testing with a dynamically allocated buffer did not uncover any failures with the test systems at hand. This patch was tested on several OMEN, Elite, and Zbooks. It was confirmed the patch resolves HPWMI_FAN GET/SET calls in an OMEN Laptop 15-ek0xxx. No problems were reported when testing on several Elite and Zbooks notebooks. Fixes: 4b4967c ("platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated") Signed-off-by: Jorge Lopez <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 65f936f ] commit be9d73e ("platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls") and commit 12b19f1 ("platform/x86: hp-wmi: Fix hp_wmi_read_int() reporting error (0x05)") cause ACPI BIOS Error (bug): Attempt to CreateField of length zero (20211217/dsopcode-133) because of the ACPI method HWMC, which unconditionally creates a Field of size (insize*8) bits: CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN) In cases where args->insize = 0, the Field size is 0, resulting in an error. Fix this by using zero insize only if 0x5 error code is returned Tested on Omen 15 AMD (2020) board ID: 8786. Fixes: be9d73e ("platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls") Signed-off-by: Bedant Patnaik <[email protected]> Tested-by: Jorge Lopez <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
commit efb75df upstream. When ep_idx is already non-zero, it means usually a capture stream that is set up explicity by a fixed-format quirk, and applying the check for generic (non-implicit-fb) sync EPs might hit incorrectly, resulting in a bogus sync endpoint for the capture stream. This patch adds a check for the ep_idx and skip if it's a secondary endpoint. It's a part of the fixes for regressions on Saffire 6. Fixes: 7b0efea ("ALSA: usb-audio: Add missing ep_idx in fixed EP quirks") Reported-and-tested-by: André Kapelrud <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit e0469d6 upstream. Focusrite Saffire 6 has fixed audioformat quirks with multiple endpoints assigned to a single altsetting. Unfortunately the generic parser couldn't detect the sync endpoint correctly as the implicit sync due to the missing EP attribute bits. In the former kernels, it used to work somehow casually, but it's been broken for a while after the large code change in 5.11. This patch cures the regression by the following: - Allow the static quirk table to provide the sync EP information; we just need to fill the fields and let the generic parser skipping parsing if sync_ep is already set. - Add the sync endpoint information to the entry for Saffire 6. Fixes: 7b0efea ("ALSA: usb-audio: Add missing ep_idx in fixed EP quirks") Reported-and-tested-by: André Kapelrud <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit d5ea754 upstream. On a machine with CX20632, Alsamixer doesn't have 'Loopback Mixing' and 'Line'. Signed-off-by: huangwenhui <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
…vo Yoga DuetITL 2021 commit 85743a8 upstream. Enables the ALC287_FIXUP_YOGA7_14ITL_SPEAKERS quirk for the Lenovo Yoga DuetITL 2021 laptop to fix speaker output. [ re-sorted in the SSID order by tiwai ] BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208555 Signed-off-by: Cameron Berkenpas <[email protected]> Co-authored-by: Songine <[email protected]> Cc: [email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 5f3d696 upstream. Enables the audio mute LEDs and limits the mic boost to avoid picking up noise. Signed-off-by: Jeremy Soller <[email protected]> Signed-off-by: Tim Crawford <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 8ea2182 upstream. During reconnects, we check the return value from cifs_negotiate_protocol, and have handlers for both success and failures. But if that passes, and cifs_setup_session returns any errors other than -EACCES, we do not handle that. This fix adds a handler for that, so that we don't go ahead and try a tree_connect on a failed session. Signed-off-by: Shyam Prasad N <[email protected]> Reviewed-by: Enzo Matsumiya <[email protected]> Cc: [email protected] Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit c36ee7d upstream. cifs.ko defines two file system types: cifs & smb3, and __cifs_get_super() was not including smb3 file system type when looking up superblocks, therefore failing to reconnect tcons in cifs_tree_connect(). Fix this by calling iterate_supers_type() on both file system types. Link: https://lore.kernel.org/r/CAFrh3J9soC36+BVuwHB=g9z_KB5Og2+p2_W+BBoBOZveErz14w@mail.gmail.com Cc: [email protected] Tested-by: Satadru Pramanik <[email protected]> Reported-by: Satadru Pramanik <[email protected]> Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 4c14d70 upstream. Currently, the secondary channels of a multichannel session also get hostname populated based on the info in primary channel. However, this will end up with a wrong resolution of hostname to IP address during reconnect. This change fixes this by not populating hostname info for all secondary channels. Fixes: 5112d80 ("cifs: populate server_hostname for extra channels") Cc: [email protected] Signed-off-by: Shyam Prasad N <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit f92de9d upstream. Fixing the interpretation of the length of the B9h VPD page (Concurrent Positioning Ranges). Adding 4 is necessary as the first 4 bytes of the page is the header with page number and length information. Adding 3 was likely a misinterpretation of the SBC-5 specification which sets all offsets starting at zero. This fixes the error in dmesg: [ 9.014456] sd 1:0:0:0: [sda] Invalid Concurrent Positioning Ranges VPD page Link: https://lore.kernel.org/r/[email protected] Fixes: e815d36 ("scsi: sd: add concurrent positioning ranges support") Cc: [email protected] Tested-by: Michael English <[email protected]> Reviewed-by: Muhammad Ahmad <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Tyler Erickson <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 24e1f05 upstream. Refactoring and consolidation of abort paths: - lpfc_sli4_abort_fcp_cmpl() and lpfc_sli_abort_fcp_cmpl() are combined into a single generic lpfc_sli_abort_fcp_cmpl() routine. Thus, remove extraneous lpfc_sli4_abort_fcp_cmpl() prototype declaration. - lpfc_nvme_abort_fcreq_cmpl() abort completion routine is called with a mismatched argument type. This may result in misleading log message content. Update to the correct argument type of lpfc_iocbq instead of lpfc_wcqe_complete. The lpfc_wcqe_complete should be derived from the lpfc_iocbq structure. Link: https://lore.kernel.org/r/[email protected] Fixes: 31a59f7 ("scsi: lpfc: SLI path split: Refactor Abort paths") Cc: <[email protected]> # v5.18 Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit e27f051 upstream. Following refactoring and consolidation in SLI processing, fix up some minor issues related to SLI path: - Correct the setting of LPFC_EXCHANGE_BUSY flag in response IOCB. - Fix some typographical errors. - Fix duplicate log messages. Link: https://lore.kernel.org/r/[email protected] Fixes: 1b64aa9 ("scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4") Cc: <[email protected]> # v5.18 Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 6f808bd upstream. Calls to starget_to_rport() may return NULL. Add check for NULL rport before dereference. Link: https://lore.kernel.org/r/[email protected] Fixes: bb21fc9 ("scsi: lpfc: Use fc_block_rport()") Cc: <[email protected]> # v5.18 Co-developed-by: Justin Tee <[email protected]> Signed-off-by: Justin Tee <[email protected]> Signed-off-by: James Smart <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit cf4a869 upstream. When freeing obsolete previous roots, check prev_roots as intended, not the current root. Signed-off-by: Shaoqin Huang <[email protected]> Fixes: 527d5cd ("KVM: x86/mmu: Zap only obsolete roots if a root shadow page is zapped") Message-Id: <[email protected]> Cc: [email protected] Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 11d39e8 upstream. SVM uses a per-cpu variable to cache the current value of the tsc scaling multiplier msr on each cpu. Commit 1ab9287 ("KVM: X86: Add vendor callbacks for writing the TSC multiplier") broke this caching logic. Refactor the code so that all TSC scaling multiplier writes go through a single function which checks and updates the cache. This fixes the following scenario: 1. A CPU runs a guest with some tsc scaling ratio. 2. New guest with different tsc scaling ratio starts on this CPU and terminates almost immediately. This ensures that the short running guest had set the tsc scaling ratio just once when it was set via KVM_SET_TSC_KHZ. Due to the bug, the per-cpu cache is not updated. 3. The original guest continues to run, it doesn't restore the msr value back to its own value, because the cache matches, and thus continues to run with a wrong tsc scaling ratio. Fixes: 1ab9287 ("KVM: X86: Add vendor callbacks for writing the TSC multiplier") Signed-off-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit dcfa24b upstream. After we have unlocked the mmap_lock for I/O, the file is pinned, but the VMA is not. Checking this flag after that can be a use-after-free. It's not a terribly interesting use-after-free as it can only read one bit, and it's used to decide whether to read 2MB or 4MB. But it upsets the automated tools and it's generally bad practice anyway, so let's fix it. Reported-by: [email protected] Fixes: 4687fdb ("mm/filemap: Support VM_HUGEPAGE for file mappings") Cc: [email protected] Signed-off-by: Matthew Wilcox (Oracle) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit dda5384 upstream. When creating (sealing) a new trusted key, migratable trusted keys have the FIXED_TPM and FIXED_PARENT attributes set, and non-migratable keys don't. This is backwards, and also causes creation to fail when creating a migratable key under a migratable parent. (The TPM thinks you are trying to seal a non-migratable blob under a migratable parent.) The following simple patch fixes the logic, and has been tested for all four combinations of migratable and non-migratable trusted keys and parent storage keys. With this logic, you will get a proper failure if you try to create a non-migratable trusted key under a migratable parent storage key, and all other combinations work correctly. Cc: [email protected] # v5.13+ Fixes: e5fb5d2 ("security: keys: trusted: Make sealed key properly interoperable") Signed-off-by: David Safford <[email protected]> Reviewed-by: Ahmad Fatoum <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit c745dfc upstream. The concurrent positioning ranges log is not a fixed size and may depend on how many ranges are supported by the device. This patch uses the size reported in the GPL directory to determine the number of pages supported by the device before attempting to read this log page. This resolves this error from the dmesg output: ata6.00: Read log 0x47 page 0x00 failed, Emask 0x1 Cc: [email protected] Fixes: fe22e1c ("libata: support concurrent positioning ranges log") Signed-off-by: Tyler Erickson <[email protected]> Reviewed-by: Muhammad Ahmad <[email protected]> Tested-by: Michael English <[email protected]> Signed-off-by: Damien Le Moal <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 6d11acd upstream. Fixing the page length in the SCSI translation for the concurrent positioning ranges VPD page. It was writing starting in offset 3 rather than offset 2 where the MSB is supposed to start for the VPD page length. Cc: [email protected] Fixes: fe22e1c ("libata: support concurrent positioning ranges log") Signed-off-by: Tyler Erickson <[email protected]> Reviewed-by: Muhammad Ahmad <[email protected]> Tested-by: Michael English <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Damien Le Moal <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 8cb0cd6 upstream. To program fuses, it is necessary to set the fuse programming time. This is determined based on the value of the platform clock. Add a clock property. Because this property is necessary for programming, it is made mandatory. Since these bindings have not yet been present in a stable release (though they are on track for 5.18), it is not an ABI break to change them in this manner. Signed-off-by: Sean Anderson <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: Michael Walle <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 386e4fb upstream. In prior kernels, we did file assignment always at prep time. This meant that req->task == current. But after deferring that assignment and then pushing the inflight tracking back in, we've got the inflight tracking using current when it should in fact now be using req->task. Fixup that error introduced by adding the inflight tracking back after file assignments got modifed. Fixes: 9cae36a ("io_uring: reinstate the inflight tracking") Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected] Tested-by: Ronald Warsow <[email protected] Tested-by: Florian Fainelli <[email protected]> Tested-by: Zan Aziz <[email protected]> Tested-by: Shuah Khan <[email protected]> Tested-by: Ron Economos <[email protected]> Tested-by: Fenil Jain <[email protected]> Tested-by: Bagas Sanjaya <[email protected]> Tested-by: Jon Hunter <[email protected]> Tested-by: Sudip Mukherjee <[email protected]> Tested-by: Rudi Heitbaum <[email protected]> Tested-by: Justin M. Forbes <[email protected]> Tested-by: Guenter Roeck <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
…flags BugLink: [Replace -fcf-protection=none patch with new version] The gcc -fcf-protection=branch option is not compatible with -mindirect-branch=thunk-extern. The latter is used when CONFIG_RETPOLINE is selected, and this will fail to build with a gcc which has -fcf-protection=branch enabled by default. Adding -fcf-protection=none when building with retpoline support to prevents such build failures. Signed-off-by: Seth Forshee <[email protected]>
Signed-off-by: Andy Whitcroft <[email protected]>
BugLink: http://bugs.launchpad.net/bugs/1585311 Signed-off-by: Andy Whitcroft <[email protected]> Acked-by: Tim Gardner <[email protected]> Acked-by: Brad Figg <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]>
The pin fixup is required to detect headset microphones on the oryp5. Fixes: 80690a2 ("ALSA: hda/realtek - Add quirk for Tuxedo XC 1509") Signed-off-by: Tim Crawford <[email protected]>
This patch was written by Takashi Iwai, I am just commiting it into the pop-os kernel before this is upstreamed
Asus released motherboard(s) with an alternate ALC4080 that lacks a SPDIF jack, and requires applying this map.
Fixes speaker output and headset detection on Clevo PD70PNT. Signed-off-by: Tim Crawford <[email protected]>
Fixes headset detection on Clevo NS50PU. Signed-off-by: Tim Crawford <[email protected]>
Fixes headset detection on Clevo L140PU. Signed-off-by: Tim Crawford <[email protected]>
…02206221336 Signed-off-by: Jeremy Soller <[email protected]>
…02206251448 Signed-off-by: 13r0ck <[email protected]>
|
Need to test:
|
|
obsoleted by #162 |
jackpot51
pushed a commit
that referenced
this pull request
Dec 13, 2022
commit 1a0c016 upstream. Move am65_cpsw_nuss_phylink_cleanup() call to after am65_cpsw_nuss_cleanup_ndev() so phylink is still valid to prevent the below Segmentation fault on module remove when first slave link is up. [ 31.652944] Unable to handle kernel paging request at virtual address 00040008000005f4 [ 31.684627] Mem abort info: [ 31.687446] ESR = 0x0000000096000004 [ 31.704614] EC = 0x25: DABT (current EL), IL = 32 bits [ 31.720663] SET = 0, FnV = 0 [ 31.723729] EA = 0, S1PTW = 0 [ 31.740617] FSC = 0x04: level 0 translation fault [ 31.756624] Data abort info: [ 31.759508] ISV = 0, ISS = 0x00000004 [ 31.776705] CM = 0, WnR = 0 [ 31.779695] [00040008000005f4] address between user and kernel address ranges [ 31.808644] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 31.814928] Modules linked in: wlcore_sdio wl18xx wlcore mac80211 libarc4 cfg80211 rfkill crct10dif_ce phy_gmii_sel ti_am65_cpsw_nuss(-) sch_fq_codel ipv6 [ 31.828776] CPU: 0 PID: 1026 Comm: modprobe Not tainted 6.1.0-rc2-00012-gfabfcf7dafdb-dirty #160 [ 31.837547] Hardware name: Texas Instruments AM625 (DT) [ 31.842760] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 31.849709] pc : phy_stop+0x18/0xf8 [ 31.853202] lr : phylink_stop+0x38/0xf8 [ 31.857031] sp : ffff80000a0839f0 [ 31.860335] x29: ffff80000a0839f0 x28: ffff000000de1c80 x27: 0000000000000000 [ 31.867462] x26: 0000000000000000 x25: 0000000000000000 x24: ffff80000a083b98 [ 31.874589] x23: 0000000000000800 x22: 0000000000000001 x21: ffff000001bfba90 [ 31.881715] x20: ffff0000015ee000 x19: 0004000800000200 x18: 0000000000000000 [ 31.888842] x17: ffff800076c45000 x16: ffff800008004000 x15: 000058e39660b106 [ 31.895969] x14: 0000000000000144 x13: 0000000000000144 x12: 0000000000000000 [ 31.903095] x11: 000000000000275f x10: 00000000000009e0 x9 : ffff80000a0837d0 [ 31.910222] x8 : ffff000000de26c0 x7 : ffff00007fbd6540 x6 : ffff00007fbd64c0 [ 31.917349] x5 : ffff00007fbd0b10 x4 : ffff00007fbd0b10 x3 : ffff00007fbd3920 [ 31.924476] x2 : d0a07fcff8b8d500 x1 : 0000000000000000 x0 : 0004000800000200 [ 31.931603] Call trace: [ 31.934042] phy_stop+0x18/0xf8 [ 31.937177] phylink_stop+0x38/0xf8 [ 31.940657] am65_cpsw_nuss_ndo_slave_stop+0x28/0x1e0 [ti_am65_cpsw_nuss] [ 31.947452] __dev_close_many+0xa4/0x140 [ 31.951371] dev_close_many+0x84/0x128 [ 31.955115] unregister_netdevice_many+0x130/0x6d0 [ 31.959897] unregister_netdevice_queue+0x94/0xd8 [ 31.964591] unregister_netdev+0x24/0x38 [ 31.968504] am65_cpsw_nuss_cleanup_ndev.isra.0+0x48/0x70 [ti_am65_cpsw_nuss] [ 31.975637] am65_cpsw_nuss_remove+0x58/0xf8 [ti_am65_cpsw_nuss] Cc: <[email protected]> # v5.18+ Fixes: e8609e6 ("net: ethernet: ti: am65-cpsw: Convert to PHYLINK") Signed-off-by: Roger Quadros <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Same checklist from #159 (comment) applies here. I would like engineering approval before closing #159, just to be sure my rebase is fine