bnxt_en: New Broadcom ethernet driver.

Broadcom ethernet driver for the new family of NetXtreme-C/E
ethernet devices.

v5:
  - Removed empty blank lines at end of files (noted by David Miller).
  - Moved busy poll helper functions to bnxt.h to at least make the
    .c file look less cluttered with #ifdef (noted by Stephen Hemminger).

v4:
  - Broke up 2 long message strings with "\n" (suggested by John Linville)
  - Constify an array of strings (suggested by Stephen Hemminger)
  - Improve bnxt_vf_pciid() (suggested by Stephen Hemminger)
  - Use PCI_VDEVICE() to populate pci_device_id table for more compact
    source.

v3:
  - Fixed 2 more sparse warnings.
  - Removed some unused structures in .h files.

v2:
  - Fixed all kbuild test robot reported warnings.
  - Fixed many of the checkpatch.pl errors and warnings.
  - Fixed the Kconfig description (noted by Dmitry Kravkov).

Acked-by: Eddie Wai <[email protected]>
Acked-by: Jeffrey Huang <[email protected]>
Signed-off-by: Prashant Sreedharan <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

drivers/net/ethernet/broadcom/Kconfig

@@ -170,4 +170,23 @@ config SYSTEMPORT
 	  Broadcom BCM7xxx Set Top Box family chipset using an internal
 	  Ethernet switch.
 
+config BNXT
+	tristate "Broadcom NetXtreme-C/E support"
+	depends on PCI
+	select FW_LOADER
+	select LIBCRC32C
+	---help---
+	  This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
+	  Ethernet cards.  To compile this driver as a module, choose M here:
+	  the module will be called bnxt_en.  This is recommended.
+
+config BNXT_SRIOV
+	bool "Broadcom NetXtreme-C/E SR-IOV support"
+	depends on BNXT && PCI_IOV
+	default y
+	---help---
+	  This configuration parameter enables Single Root Input Output
+	  Virtualization support in the NetXtreme-C/E products. This
+	  allows for virtual function acceleration in virtual environments.
+
 endif # NET_VENDOR_BROADCOM

drivers/net/ethernet/broadcom/Makefile

@@ -12,3 +12,4 @@ obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
 obj-$(CONFIG_TIGON3) += tg3.o
 obj-$(CONFIG_BGMAC) += bgmac.o
 obj-$(CONFIG_SYSTEMPORT) += bcmsysport.o
+obj-$(CONFIG_BNXT) += bnxt/

drivers/net/ethernet/broadcom/bnxt/Makefile

@@ -0,0 +1,3 @@
+obj-$(CONFIG_BNXT) += bnxt_en.o
+
+bnxt_en-y := bnxt.o bnxt_sriov.o bnxt_ethtool.o

drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h

@@ -0,0 +1,17 @@
+/* Broadcom NetXtreme-C/E network driver.
+ *
+ * Copyright (c) 2014-2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef BNXT_ETHTOOL_H
+#define BNXT_ETHTOOL_H
+
+extern const struct ethtool_ops bnxt_ethtool_ops;
+
+u32 bnxt_fw_to_ethtool_speed(u16);
+
+#endif

drivers/net/ethernet/broadcom/bnxt/bnxt_fw_hdr.h

@@ -0,0 +1,104 @@
+/* Broadcom NetXtreme-C/E network driver.
+ *
+ * Copyright (c) 2014-2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef __BNXT_FW_HDR_H__
+#define __BNXT_FW_HDR_H__
+
+#define BNXT_FIRMWARE_BIN_SIGNATURE     0x1a4d4342	/* "BCM"+0x1a */
+
+enum SUPPORTED_FAMILY {
+	DEVICE_5702_3_4_FAMILY,		/* 0  - Denali, Vinson, K2 */
+	DEVICE_5705_FAMILY,		/* 1  - Bachelor */
+	DEVICE_SHASTA_FAMILY,		/* 2  - 5751 */
+	DEVICE_5706_FAMILY,		/* 3  - Teton */
+	DEVICE_5714_FAMILY,		/* 4  - Hamilton */
+	DEVICE_STANFORD_FAMILY,		/* 5  - 5755 */
+	DEVICE_STANFORD_ME_FAMILY,	/* 6  - 5756 */
+	DEVICE_SOLEDAD_FAMILY,		/* 7  - 5761[E] */
+	DEVICE_CILAI_FAMILY,		/* 8  - 57780/60/90/91 */
+	DEVICE_ASPEN_FAMILY,		/* 9  - 57781/85/61/65/91/95 */
+	DEVICE_ASPEN_PLUS_FAMILY,	/* 10 - 57786 */
+	DEVICE_LOGAN_FAMILY,		/* 11 - Any device in the Logan family
+					 */
+	DEVICE_LOGAN_5762,		/* 12 - Logan Enterprise (aka Columbia)
+					 */
+	DEVICE_LOGAN_57767,		/* 13 - Logan Client */
+	DEVICE_LOGAN_57787,		/* 14 - Logan Consumer */
+	DEVICE_LOGAN_5725,		/* 15 - Logan Server (TruManage-enabled)
+					 */
+	DEVICE_SAWTOOTH_FAMILY,		/* 16 - 5717/18 */
+	DEVICE_COTOPAXI_FAMILY,		/* 17 - 5719 */
+	DEVICE_SNAGGLETOOTH_FAMILY,	/* 18 - 5720 */
+	DEVICE_CUMULUS_FAMILY,		/* 19 - Cumulus/Whitney */
+	MAX_DEVICE_FAMILY
+};
+
+enum SUPPORTED_CODE {
+	CODE_ASF1,		/* 0  - ASF VERSION 1.03 <deprecated> */
+	CODE_ASF2,		/* 1  - ASF VERSION 2.00 <deprecated> */
+	CODE_PASSTHRU,		/* 2  - PassThru         <deprecated> */
+	CODE_PT_SEC,		/* 3  - PassThru with security <deprecated> */
+	CODE_UMP,		/* 4  - UMP                     <deprecated> */
+	CODE_BOOT,		/* 5  - Bootcode */
+	CODE_DASH,		/* 6  - TruManage (DASH + ASF + PMCI)
+				 *	Management firmwares
+				 */
+	CODE_MCTP_PASSTHRU,	/* 7  - NCSI / MCTP Passt-hrough firmware */
+	CODE_PM_OFFLOAD,	/* 8  - Power-Management Proxy Offload firmwares
+				 */
+	CODE_MDNS_SD_OFFLOAD,	/* 9  - Multicast DNS Service Discovery Proxys
+				 *	Offload firmware
+				 */
+	CODE_DISC_OFFLOAD,	/* 10 - Discovery Offload firmware */
+	CODE_MUSTANG,		/* 11 - I2C Error reporting APE firmwares
+				 *	<deprecated>
+				 */
+	CODE_ARP_BATCH,		/* 12 - ARP Batch firmware */
+	CODE_SMASH,		/* 13 - TruManage (SMASH + DCMI/IPMI + PMCI)
+				 *	Management firmware
+				 */
+	CODE_APE_DIAG,		/* 14 - APE Test Diag firmware */
+	CODE_APE_PATCH,		/* 15 - APE Patch firmware */
+	CODE_TANG_PATCH,	/* 16 - TANG Patch firmware */
+	CODE_KONG_FW,		/* 17 - KONG firmware */
+	CODE_KONG_PATCH,	/* 18 - KONG Patch firmware */
+	CODE_BONO_FW,		/* 19 - BONO firmware */
+	CODE_BONO_PATCH,	/* 20 - BONO Patch firmware */
+
+	MAX_CODE_TYPE,
+};
+
+enum SUPPORTED_MEDIA {
+	MEDIA_COPPER,		/* 0 */
+	MEDIA_FIBER,		/* 1 */
+	MEDIA_NONE,		/* 2 */
+	MEDIA_COPPER_FIBER,	/* 3 */
+	MAX_MEDIA_TYPE,
+};
+
+struct bnxt_fw_header {
+	__le32 signature;	/* constains the constant value of
+				 * BNXT_Firmware_Bin_Signatures
+				 */
+	u8 flags;		/* reserved for ChiMP use */
+	u8 code_type;		/* enum SUPPORTED_CODE */
+	u8 device;		/* enum SUPPORTED_FAMILY */
+	u8 media;		/* enum SUPPORTED_MEDIA */
+	u8 version[16];		/* the null terminated version string to
+				 * indicate the version of the
+				 * file, this will be copied from the binary
+				 * file version string
+				 */
+	u8 build;
+	u8 revision;
+	u8 minor_ver;
+	u8 major_ver;
+};
+
+#endif

drivers/net/ethernet/broadcom/bnxt/bnxt_nvm_defs.h

@@ -0,0 +1,59 @@
+/* Broadcom NetXtreme-C/E network driver.
+ *
+ * Copyright (c) 2014-2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _BNXT_NVM_DEFS_H_
+#define _BNXT_NVM_DEFS_H_
+
+enum bnxt_nvm_directory_type {
+	BNX_DIR_TYPE_UNUSED = 0,
+	BNX_DIR_TYPE_PKG_LOG = 1,
+	BNX_DIR_TYPE_CHIMP_PATCH = 3,
+	BNX_DIR_TYPE_BOOTCODE = 4,
+	BNX_DIR_TYPE_VPD = 5,
+	BNX_DIR_TYPE_EXP_ROM_MBA = 6,
+	BNX_DIR_TYPE_AVS = 7,
+	BNX_DIR_TYPE_PCIE = 8,
+	BNX_DIR_TYPE_PORT_MACRO = 9,
+	BNX_DIR_TYPE_APE_FW = 10,
+	BNX_DIR_TYPE_APE_PATCH = 11,
+	BNX_DIR_TYPE_KONG_FW = 12,
+	BNX_DIR_TYPE_KONG_PATCH = 13,
+	BNX_DIR_TYPE_BONO_FW = 14,
+	BNX_DIR_TYPE_BONO_PATCH = 15,
+	BNX_DIR_TYPE_TANG_FW = 16,
+	BNX_DIR_TYPE_TANG_PATCH = 17,
+	BNX_DIR_TYPE_BOOTCODE_2 = 18,
+	BNX_DIR_TYPE_CCM = 19,
+	BNX_DIR_TYPE_PCI_CFG = 20,
+	BNX_DIR_TYPE_TSCF_UCODE = 21,
+	BNX_DIR_TYPE_ISCSI_BOOT = 22,
+	BNX_DIR_TYPE_ISCSI_BOOT_IPV6 = 24,
+	BNX_DIR_TYPE_ISCSI_BOOT_IPV4N6 = 25,
+	BNX_DIR_TYPE_ISCSI_BOOT_CFG6 = 26,
+	BNX_DIR_TYPE_EXT_PHY = 27,
+	BNX_DIR_TYPE_SHARED_CFG = 40,
+	BNX_DIR_TYPE_PORT_CFG = 41,
+	BNX_DIR_TYPE_FUNC_CFG = 42,
+	BNX_DIR_TYPE_MGMT_CFG = 48,
+	BNX_DIR_TYPE_MGMT_DATA = 49,
+	BNX_DIR_TYPE_MGMT_WEB_DATA = 50,
+	BNX_DIR_TYPE_MGMT_WEB_META = 51,
+	BNX_DIR_TYPE_MGMT_EVENT_LOG = 52,
+	BNX_DIR_TYPE_MGMT_AUDIT_LOG = 53
+};
+
+#define BNX_DIR_ORDINAL_FIRST			0
+
+#define BNX_DIR_EXT_INACTIVE			(1 << 0)
+#define BNX_DIR_EXT_UPDATE			(1 << 1)
+
+#define BNX_DIR_ATTR_NO_CHKSUM			(1 << 0)
+#define BNX_DIR_ATTR_PROP_STREAM		(1 << 1)
+
+#endif				/* Don't add anything after this line */

drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h

@@ -0,0 +1,22 @@
+/* Broadcom NetXtreme-C/E network driver.
+ *
+ * Copyright (c) 2014-2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef BNXT_SRIOV_H
+#define BNXT_SRIOV_H
+
+int bnxt_get_vf_config(struct net_device *, int, struct ifla_vf_info *);
+int bnxt_set_vf_mac(struct net_device *, int, u8 *);
+int bnxt_set_vf_vlan(struct net_device *, int, u16, u8);
+int bnxt_set_vf_bw(struct net_device *, int, int, int);
+int bnxt_set_vf_link_state(struct net_device *, int, int);
+int bnxt_set_vf_spoofchk(struct net_device *, int, bool);
+int bnxt_sriov_configure(struct pci_dev *pdev, int num_vfs);
+void bnxt_sriov_disable(struct bnxt *);
+void bnxt_hwrm_exec_fwd_req(struct bnxt *);
+#endif