net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC

This patch adds a realtek-smi subdriver for the RTL8365MB-VC 4+1 port
10/100/1000M switch controller. The driver has been developed based on a
GPL-licensed OS-agnostic Realtek vendor driver known as rtl8367c found
in the OpenWrt source tree.

Despite the name, the RTL8365MB-VC has an entirely different register
layout to the already-supported RTL8366RB ASIC. Notwithstanding this,
the structure of the rtl8365mb subdriver is loosely based on the rtl8366rb
subdriver. Like the 'rb, it establishes its own irqchip to handle
cascaded PHY link status interrupts.

The RTL8365MB-VC switch is capable of offloading a large number of
features from the software, but this patch introduces only the most
basic DSA driver functionality. The ports always function as standalone
ports, with bridging handled in software.

One more thing. Realtek's nomenclature for switches makes it hard to
know exactly what other ASICs might be supported by this driver. The
vendor driver goes by the name rtl8367c, but as far as I can tell, no
chip actually exists under this name. As such, the subdriver is named
rtl8365mb to emphasize the potentially limited support. But it is clear
from the vendor sources that a number of other more advanced switches
share a similar register layout, and further support should not be too
hard to add given access to the relevant hardware. With this in mind,
the subdriver has been written with as few assumptions about the
particular chip as is reasonable. But the RTL8365MB-VC is the only
hardware I have available, so some further work is surely needed.

Co-developed-by: Michael Rasmussen <[email protected]>
Signed-off-by: Michael Rasmussen <[email protected]>
Signed-off-by: Alvin Šipraga <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Tested-by: Arınç ÜNAL <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

drivers/net/dsa/Kconfig

@@ -70,6 +70,7 @@ config NET_DSA_QCA8K
 config NET_DSA_REALTEK_SMI
 	tristate "Realtek SMI Ethernet switch family support"
 	select NET_DSA_TAG_RTL4_A
+	select NET_DSA_TAG_RTL8_4
 	select FIXED_PHY
 	select IRQ_DOMAIN
 	select REALTEK_PHY

drivers/net/dsa/Makefile

@@ -10,7 +10,7 @@ obj-$(CONFIG_NET_DSA_MT7530)	+= mt7530.o
 obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
 obj-$(CONFIG_NET_DSA_QCA8K)	+= qca8k.o
 obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek-smi.o
-realtek-smi-objs		:= realtek-smi-core.o rtl8366.o rtl8366rb.o
+realtek-smi-objs		:= realtek-smi-core.o rtl8366.o rtl8366rb.o rtl8365mb.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o

drivers/net/dsa/realtek-smi-core.c

@@ -501,6 +501,10 @@ static const struct of_device_id realtek_smi_of_match[] = {
 		.compatible = "realtek,rtl8366s",
 		.data = NULL,
 	},
+	{
+		.compatible = "realtek,rtl8365mb",
+		.data = &rtl8365mb_variant,
+	},
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, realtek_smi_of_match);

drivers/net/dsa/realtek-smi-core.h

@@ -140,5 +140,6 @@ int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset);
 void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data);
 
 extern const struct realtek_smi_variant rtl8366rb_variant;
+extern const struct realtek_smi_variant rtl8365mb_variant;
 
 #endif /*  _REALTEK_SMI_H */