Skip to content
lint

fs_mark tests [DONT MERGE] #1805

Sign in to view logs

fs_mark tests [DONT MERGE]

fs_mark tests [DONT MERGE] #1805

This check has been archived and is scheduled for deletion. Learn more about checks retention
GitHub Actions / Unit Test Results failed Oct 18, 2023 in 0s

94 fail, 281 skipped, 2 594 pass in 2h 49m 14s

2 969 tests   - 175   2 594 ✔️  - 171   2h 49m 14s ⏱️ + 1h 54m 26s
   377 suites +    2      281 💤  -   27 
       1 files   ±    0        94 ❌ +  23 

Results for commit e2fe2a7. ± Comparison against earlier commit 8020447.

Annotations

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test8

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test8 (phoenix-rtos-tests/fs_mark/test8) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
/

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test9

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test9 (phoenix-rtos-tests/fs_mark/test9) failed 

junit.xml [took 10m 0s]
Raw output 
Timeout, probably fs hang-up

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test12

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test12 (phoenix-rtos-tests/fs_mark/test12) failed 

junit.xml [took 10m 55s]
Raw output 
Timeout, probably fs hang-up

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test14

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test14 (phoenix-rtos-tests/fs_mark/test14) failed 

junit.xml [took 1h 0m 35s]
Raw output 
Timeout, probably fs hang-up

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test15

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test15 (phoenix-rtos-tests/fs_mark/test15) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test16

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test16 (phoenix-rtos-tests/fs_mark/test16) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test17

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test17 (phoenix-rtos-tests/fs_mark/test17) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test18

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test18 (phoenix-rtos-tests/fs_mark/test18) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test19

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test19 (phoenix-rtos-tests/fs_mark/test19) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test20

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test20 (phoenix-rtos-tests/fs_mark/test20) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test21

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test21 (phoenix-rtos-tests/fs_mark/test21) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test22

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test22 (phoenix-rtos-tests/fs_mark/test22) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test23

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test23 (phoenix-rtos-tests/fs_mark/test23) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test24

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test24 (phoenix-rtos-tests/fs_mark/test24) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test25

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test25 (phoenix-rtos-tests/fs_mark/test25) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test26

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test26 (phoenix-rtos-tests/fs_mark/test26) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test27

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test27 (phoenix-rtos-tests/fs_mark/test27) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test28

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test28 (phoenix-rtos-tests/fs_mark/test28) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test29

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test29 (phoenix-rtos-tests/fs_mark/test29) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test30

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test30 (phoenix-rtos-tests/fs_mark/test30) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test31

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test31 (phoenix-rtos-tests/fs_mark/test31) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test32

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test32 (phoenix-rtos-tests/fs_mark/test32) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test33

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test33 (phoenix-rtos-tests/fs_mark/test33) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test34

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test34 (phoenix-rtos-tests/fs_mark/test34) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Check warning on line 0 in phoenix-rtos-tests/fs_mark/test35

See this annotation in the file changed.

@github-actions github-actions / Unit Test Results

armv7a9-zynq7000-zedboard:phoenix-rtos-tests/fs_mark/test35 (phoenix-rtos-tests/fs_mark/test35) failed 

junit.xml [took 0s]
Raw output 
SHELL ERROR: Couldn't find a prompt!
SHELL ERROR: Couldn't find a prompt!
EXPECTED: (psh)% 
OUTPUT:
Phoenix-RTOS loader v. 1.21 rev: 3cf5a33
hal: Cortex-A9 Zynq 7000
dev/uart: Initializing uart(0.0)
dev/uart: Initializing uart(0.1)
dev/usb: Initializing usb-cdc(1.2)
dev/flash: Configured Spansion s25fl256s1 32MB nor flash(2.0)
cmd: Executing pre-init script
console: Setting console to 0.1

                                 
Waiting for input,   400 [ms]
                                 
Waiting for input,   300 [ms]
                                 
Waiting for input,   200 [ms]
                                 
Waiting for input,   100 [ms]
                                 
Waiting for input,     0 [ms]
                                 
Waiting for input,     0 [ms]
Phoenix-RTOS microkernel v. 3.0 rev: 9edeea5
hal: Xilinx Zynq-7000 ARMv7 Cortex-A9 r3p0
hal: ThumbEE, Jazelle, Thumb, ARM, Security
hal: Using GIC interrupt controller
vm: Initializing page allocator (1052+0)/131072KB, page_t=16
vm: [256x][24K][6P]H[17K][80A][127H]P[760.]PPP.PPPS[31744.]
vm: Initializing memory mapper: (8094*64) 518016
vm: Initializing kernel memory allocator: (64*48) 3072
vm: Initializing memory objects
proc: Initializing thread scheduler, priorities=8
syscalls: Initializing syscall table [103]
main: Starting syspage programs: 'dummyfs;-N;devfs;-D', 'zynq7000-uart', 'psh;-i;/etc/rc.psh', 'zynq7000-flash;-r;/dev/mtd1:8257536:16777216:jffs2;-p;/dev/mtd1:0x1800000:0x4e0000'
dummyfs: initialized
version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
View more details on GitHub Actions