merge qmk#14784 into this PR

keyboards/kprepublic/bm40hsrgb/keymaps/gabustoledo/readme.md

@@ -4,13 +4,13 @@
 
 - Compile:
 
-  `qmk compile -kb bm40hsrgb -km gabustoledo`
+  `qmk compile -kb kprepublic/bm40hsrgb -km gabustoledo`
 
 ### Flash
 
 - Flash:
 
-  `qmk flash -kb bm40hsrgb -km gabustoledo`
+  `qmk flash -kb kprepublic/bm40hsrgb -km gabustoledo`
 
 # Layout
 

keyboards/kprepublic/bm40hsrgb/keymaps/signynt/readme.md

@@ -30,11 +30,11 @@ Sigma Squared modifies on **Miryoku** in the following ways:
 
 - to directly flash to board:
 
-  `qmk flash -kb bm40hsrgb -km signynt`
+  `qmk flash -kb kprepublic/bm40hsrgb -km signynt`
 
 - to only compile:
 
-  `qmk compile -kb bm40hsrgb -km signynt`
+  `qmk compile -kb kprepublic/bm40hsrgb -km signynt`
 
 
 

keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_loud/readme.md

@@ -30,11 +30,11 @@ Sigma Squared modifies on **Miryoku** in the following ways:
 
 - to directly flash to board:
 
-  `qmk flash -kb bm40hsrgb -km signynt`
+  `qmk flash -kb kprepublic/bm40hsrgb -km signynt`
 
 - to only compile:
 
-  `qmk compile -kb bm40hsrgb -km signynt`
+  `qmk compile -kb kprepublic/bm40hsrgb -km signynt`
 
 
 

keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_quiet/readme.md

@@ -30,11 +30,11 @@ Sigma Squared modifies on **Miryoku** in the following ways:
 
 - to directly flash to board:
 
-  `qmk flash -kb bm40hsrgb -km signynt`
+  `qmk flash -kb kprepublic/bm40hsrgb -km signynt`
 
 - to only compile:
 
-  `qmk compile -kb bm40hsrgb -km signynt`
+  `qmk compile -kb kprepublic/bm40hsrgb -km signynt`
 
 
 

keyboards/kprepublic/bm43a/keymaps/stevexyz/readme.md

@@ -19,7 +19,7 @@ And a view on the actual build:
 
 ![layout](https://raw.githubusercontent.com/stevexyz/qmk_firmware/master/keyboards/bm43a/keymaps/stevexyz/actualbuild.jpeg)
 
-In order to compile the module from qmk root directory use the command 'make bm43a:stevexyz'
+In order to compile the module from qmk root directory use the command 'make kprepublic/bm43a:stevexyz'
 
-And in order to upload the new firmware use the command: 'qmk flash -kb bm43a -km stevexyz' (you can initiate programming with keyboard RESET key, that in this keymap has been moved on the backspace button in the "lights" layer)
+And in order to upload the new firmware use the command: 'qmk flash -kb kprepublic/bm43a -km stevexyz' (you can initiate programming with keyboard RESET key, that in this keymap has been moved on the backspace button in the "lights" layer)
 

keyboards/kprepublic/jj40/keymaps/cockpit/readme.md

@@ -48,8 +48,8 @@
 
 ```bash
 cd qmk_firmware
-make jj40:cockpit
-bootloadHID .build/jj40_cockpit.hex
+make kprepublic/jj40:cockpit
+bootloadHID .build/kprepublic_jj40_cockpit.hex
 ```
 
 _if you're getting permission errors use sudo_

keyboards/kprepublic/jj40/keymaps/waples/readme.md

@@ -11,7 +11,7 @@ I currently have the following layers in my keymap:
 * Dual		(adjust)
 
 ### Note to self:
-YOU NEED TO USE [bootloadHID -r jj40_waples.hex](https://github.com/qmk/qmk_firmware/tree/master/keyboards/jj40)
+YOU NEED TO USE [bootloadHID -r kprepublic_jj40_waples.hex](https://github.com/qmk/qmk_firmware/tree/master/keyboards/jj40)
 
 ## the stuff below is out of date and I think about removing them from this readme
 

keyboards/ktec/ergodone/readme.md

@@ -25,4 +25,4 @@ The ErgoDone uses a customized HID bootloader rather than the Teensy one. It doe
 ![Ergodone Flash Mode](https://i.imgur.com/sNivAnr.jpg)
 2. To flash the .hex file, use the `hid_bootloader_cli` utlity from the [TKG Toolkit](https://github.com/kairyu/tkg-toolkit) (as of 2017-10-03, only [this old version](https://github.com/kairyu/tkg-toolkit/blob/b14c67ca8bc84c07e5fc6b2e01ae4002b808243a/windows/bin/hid_bootloader_cli.exe) works under Windows):
 
-       hid_bootloader_cli -mmcu=atmega32u4 ergodone_default.hex
+       hid_bootloader_cli -mmcu=atmega32u4 ktec_ergodone_default.hex

keyboards/xiudi/xd002/readme.md

@@ -37,7 +37,7 @@ sudo udevadm trigger
 **Reset Key**: Hold down key nearest to the USB socket while plugging in the keyboard.
 
 ```bash
-make xd002:default:flash
+make xiudi/xd002:default:flash
 
 # or directly with...
 micronucleus --run <firmware.hex>

keyboards/xiudi/xd004/keymaps/system_and_media/readme.md

@@ -6,4 +6,4 @@ It also has a 'Super Alt-F4' key for Windows that, when tapped does Alt-F4, unle
 
 ## Build
 
-To build the keymap, simply run `make xd004:system_and_media`.
+To build the keymap, simply run `make xiudi/xd004:system_and_media`.

keyboards/xiudi/xd60/keymaps/Jos/README.md

@@ -19,4 +19,4 @@ There are a few `#define` lines at the beginning of the keymap file that enable
 
 
 # Build
-To build, simply run `make xd60:Jos`
+To build, simply run `make xiudi/xd60:Jos`

keyboards/xiudi/xd60/keymaps/birkir/readme.md

@@ -42,4 +42,4 @@ RGB settings are persisted for layer 0 when done.
 - More dynamic keyboard configuration on Layer 2
 
 ## Build
-To build the default keymap, simply run `make xd60:birkir`.
+To build the default keymap, simply run `make xiudi/xd60:birkir`.

keyboards/xiudi/xd60/keymaps/default/readme.md

@@ -9,5 +9,5 @@ Default Keymap for XD60 as indicated on the original sale page.
 
 To build the default keymap, simply run:
 
-    make xd60/rev2:default  # XD60 rev2
-    make xd60/rev3:default  # XD60 rev3
+    make xiudi/xd60/rev2:default  # XD60 rev2
+    make xiudi/xd60/rev3:default  # XD60 rev3

keyboards/xiudi/xd60/keymaps/edulpn/readme.md

@@ -6,4 +6,4 @@
 ![Edulpn Keymap for the XD60 PCB](https://i.imgur.com/PoL5qcr.png)
 
 ## Build
-To build the default keymap, simply run `make xd60:edulpn`.
+To build the default keymap, simply run `make xiudi/xd60:edulpn`.

keyboards/xiudi/xd60/keymaps/edulpn64/readme.md

@@ -6,4 +6,4 @@
 This keymap uses the Default XD60 base layer, but follows the GK64 function layer (one of my XD60 boards use GK64 keycaps).
 
 ## Build
-To build the default keymap, simply run `make xd60:edulpn64`.
+To build the default keymap, simply run `make xiudi/xd60:edulpn64`.

keyboards/xiudi/xd60/keymaps/fvolpe83/readme.md

@@ -27,7 +27,7 @@ via has been enabled
 
 To build the keymap, simply run:
 
-    make xd60/rev3:fvolpe83  # XD60 rev3
+    make xiudi/xd60/rev3:fvolpe83  # XD60 rev3
 
 
 ![Keyboard Layout (Physical appearence)](https://i.imgur.com/CSRPjbX.png "physical layout")

keyboards/xiudi/xd60/keymaps/iso/readme.md

@@ -16,5 +16,5 @@ iso Keymap for XD60.
 
 To build the default keymap, simply run:
 
-    make xd60/rev2:iso  # XD60 rev2
-    make xd60/rev3:iso  # XD60 rev3
+    make xiudi/xd60/rev2:iso  # XD60 rev2
+    make xiudi/xd60/rev3:iso  # XD60 rev3

keyboards/xiudi/xd60/keymaps/kmontag42/readme.md

@@ -15,4 +15,4 @@ This layout is  WIP for me as I use my shiny new keyboard more and more. I will
 * I use emacs, which could account for some of the oddities in my layout and macros
 
 ## Build
-To build the default keymap, simply run `make xd60:kmontag42`.
+To build the default keymap, simply run `make xiudi/xd60:kmontag42`.

keyboards/xiudi/xd60/keymaps/krusli/readme.md

@@ -4,4 +4,4 @@
 Keymap for the XD60 (ANSI) with 2.25u left shift, split right shift. HHKB-like function layer.
 
 ## Build
-To build this keymap, simply run `make xd60:krusli` on the top-level directory for QMK.
+To build this keymap, simply run `make xiudi/xd60:krusli` on the top-level directory for QMK.

keyboards/xiudi/xd60/keymaps/melka/readme.md

@@ -18,4 +18,4 @@ To define your password, rename passwd_template.h file to passwd.h and edit the
 
 To build this keymap, simply run:
 
-    make xd60/rev3:melka  # XD60 rev3
+    make xiudi/xd60/rev3:melka  # XD60 rev3

keyboards/xiudi/xd60/keymaps/petesmom/README.md

@@ -4,10 +4,10 @@ Customized xd60 keymap based on yuuki's but a step sideways with Mac support. Fo
 
 ## Programming Instructions
 
-Change the layout in `keymap.c` then run `make xd60-petesmom`. The compiled file will be located in `.build/xd60_petesmom.hex` relative to the project root. To flash it onto your keyboard, use whatever program works on your OS. I personally use `dfu-programmer`, and run:
+Change the layout in `keymap.c` then run `make xiudi/xd60:petesmom`. The compiled file will be located in `.build/xiudi_xd60_petesmom.hex` relative to the project root. To flash it onto your keyboard, use whatever program works on your OS. I personally use `dfu-programmer`, and run:
 
 * `sudo dfu-programmer atmega32u4 erase`
-* `sudo dfu-programmer atmega32u4 flash .build/xd60-petesmom.hex`
+* `sudo dfu-programmer atmega32u4 flash .build/xiudi_xd60-petesmom.hex`
 * `sudo dfu-programmer atmega32u4 start`
 
 ## Layout

keyboards/xiudi/xd60/keymaps/semicolonsnet/readme.md

@@ -9,5 +9,5 @@ Custom Keymap for XD60 - uses a META key and lots of shortcut keys that are late
 
 To build the default keymap, simply run:
 
-    make xd60/rev2:default  # XD60 rev2
-    make xd60/rev3:default  # XD60 rev3
+    make xiudi/xd60/rev2:default  # XD60 rev2
+    make xiudi/xd60/rev3:default  # XD60 rev3

keyboards/xiudi/xd60/keymaps/styr/readme.md

@@ -4,4 +4,4 @@
 Default Keymap for XD60 as indicated on the original sale page.
 
 ## Build
-To build the default keymap, simply run `make xd60/rev3:styr`.
+To build the default keymap, simply run `make xiudi/xd60/rev3:styr`.

keyboards/xiudi/xd60/keymaps/supercoffee/readme.md

@@ -6,4 +6,4 @@
 60% Keymap for XD60 with GH60 ANSI layout. Arrow keys mapped to WASD in function layer.
 
 ## Build
-To build the default keymap, simply run `make xd60:supercoffee`.
+To build the default keymap, simply run `make xiudi/xd60:supercoffee`.

keyboards/xiudi/xd60/keymaps/yuuki/README.md

@@ -4,11 +4,11 @@ Customized xd60 keymap with inspirations from HHKB and the layout I used on my V
 
 ## Programming Instructions
 
-Change the layout in `keymap.c` then run `make xd60:yuuki`. The compiled file will be located in `.build/xd60_yuuki.hex` relative to the project root. To flash it onto your keyboard, use whatever program works on your OS. I personally use `dfu-programmer`, and run:
+Change the layout in `keymap.c` then run `make xiudi/xd60:yuuki`. The compiled file will be located in `.build/xiudi_xd60_yuuki.hex` relative to the project root. To flash it onto your keyboard, use whatever program works on your OS. I personally use `dfu-programmer`, and run:
 
 * reset keyboard by pressing the reset button on the back of the PCB
 * `sudo dfu-programmer atmega32u4 erase`
-* `sudo dfu-programmer atmega32u4 flash .build/xd60_yuuki.hex`
+* `sudo dfu-programmer atmega32u4 flash .build/xiudi_xd60_yuuki.hex`
 * `sudo dfu-programmer atmega32u4 start`
 
 ## Layout

keyboards/xiudi/xd68/keymaps/default/readme.md

@@ -1,5 +1,5 @@
 # XD68 layout for Default ANSI
 
 ```
-make xd68:default
+make xiudi/xd68:default
 ```

keyboards/xiudi/xd68/keymaps/default_iso/readme.md

@@ -1,5 +1,5 @@
 # XD68 layout for Default ISO
 
 ```
-make xd68:default_iso
+make xiudi/xd68:default_iso
 ```

keyboards/xiudi/xd75/keymaps/bbaserdem/readme.md

@@ -9,6 +9,6 @@
 
 Take the board into reset mode, then
 ```
-make xd75:bbaserdem:dfu
+make xiudi/xd75:bbaserdem:dfu
 ```
 Either sudo it or set permissions in udev.

keyboards/xiudi/xd75/keymaps/buzzlighter1/readme.md

@@ -50,5 +50,5 @@ $ cd qmk_firmware
 
 build
 ```
-$ make xd75:buzzlighter1
+$ make xiudi/xd75:buzzlighter1
 ```

keyboards/xiudi/xd75/keymaps/clanghans/readme.md

@@ -5,7 +5,7 @@
 
 * Build/Flash
   qmk setup
-  qmk compile -kb xd75 -km clanghans
-  qmk flash -kb xd75 -km clanghans
+  qmk compile -kb xiudi/xd75 -km clanghans
+  qmk flash -kb xiudi/xd75 -km clanghans
 
   Hit 'Raise'+'PgUp' for entering bootloader mode

keyboards/xiudi/xd75/keymaps/colinta/readme.md

@@ -1,7 +1,7 @@
 # colinta's keymap for XD75
 
 ```
-make xd75:colinta:dfu
+make xiudi/xd75:colinta:dfu
 ```
 
 The default layout is a Colemak keyboard with "one-shot" keys assigned to the modifier keys.
@@ -41,13 +41,13 @@ If you would *also* like to take advantage of this feature, you'll first want to
 # exclude patterns (uncomment them if you want to use them):
 # *.[oa]
 # *~
-/keyboards/xd75/keymaps/colinta/secrets.h
+/keyboards/xiudi/xd75/keymaps/colinta/secrets.h
 ```
 
 Then you can create this file and add your macro strings to it:
 
 ```
-$EDITOR keyboards/xd75/keymaps/colinta/secrets.h
+$EDITOR keyboards/xiudi/xd75/keymaps/colinta/secrets.h
 ```
 
 ###### secrets.h
@@ -60,5 +60,5 @@ $EDITOR keyboards/xd75/keymaps/colinta/secrets.h
 To include the feature at compile time, include the flag `IS_COLINTA` like so:
 
 ```
-make xd75:colinta:dfu EXTRAFLAGS=-DIS_COLINTA
+make xiudi/xd75:colinta:dfu EXTRAFLAGS=-DIS_COLINTA
 ```

keyboards/xiudi/xd75/keymaps/developper_bepo/readme.md

@@ -10,4 +10,4 @@ Keyboard maintainer: [Quentin Lebastard](https://github.com/lebastaq)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make xd75:developper_bepo
+    make xiudi/xd75:developper_bepo

keyboards/xiudi/xd75/keymaps/french/readme.md

@@ -16,5 +16,5 @@ La touche de fonction permet elle d'avoir accès aux différentes touches multim
 # Compilation 
 
 ```
-make xd75:french:dfu
+make xiudi/xd75:french:dfu
 ```

keyboards/xiudi/xd75/keymaps/scheiklp/readme.md

@@ -1,9 +1,9 @@
 # KOY Layout for the xd75 pcb board
 Compile the layout
 ```bash
-qmk compile -kb xd75 -km scheiklp
+qmk compile -kb xiudi/xd75 -km scheiklp
 ```
 and flash it to the board
 ```bash
-qmk flash -kb xd75 -km scheiklp
+qmk flash -kb xiudi/xd75 -km scheiklp
 ```

keyboards/xiudi/xd75/keymaps/tdl-jturner/readme.md

@@ -3,7 +3,7 @@
 
 Keyboard Layout Editor: [Link](http://www.keyboard-layout-editor.com/#/gists/b2b23097ef70fd9170e266e4cbc06c02)
 
-Make Command: make xd75:tdl-jturner
+Make Command: make xiudi/xd75:tdl-jturner
 
 Notes:
 * Based on Qwerty