Update .travis.yml

* Change build commands to make log a little easier to read * Create a backup of the _config.h file before starting * Add `before_deploy` and `deploy` sections to deploy compiled binaries when a release is tagged
pascallanger · May 8, 2019 · 2b4ac41 · 2b4ac41
1 parent 2b47958
commit 2b4ac41
Showing 1 changed file with 82 additions and 2 deletions.
diff --git a/.travis.yml b/.travis.yml
@@ -41,9 +41,9 @@ before_install:
       arduino --install-boards multi4in1:avr;
     fi
   #
-  - buildMulti() { arduino --verify --board $BOARD Multiprotocol/Multiprotocol.ino; }
+  - buildMulti() { BUILDCMD="arduino --verify --board $BOARD Multiprotocol/Multiprotocol.ino --pref build.path=./build/"; echo $BUILDCMD; $BUILDCMD; echo; }
   - buildProtocol() { opt_disable $ALL_PROTOCOLS; opt_enable $1; buildMulti; }
-  - buildEachProtocol() { exitcode=0; for PROTOCOL in $ALL_PROTOCOLS ; do echo Building $PROTOCOL; buildProtocol $PROTOCOL; if [ $? -ne 0 ]; then exitcode=1; fi; echo; done; return $exitcode; }
+  - buildEachProtocol() { exitcode=0; for PROTOCOL in $ALL_PROTOCOLS ; do echo Building $PROTOCOL; buildProtocol $PROTOCOL; if [ $? -ne 0 ]; then exitcode=1; fi; done; return $exitcode; }
   #
 install: true
 before_script:
@@ -52,6 +52,8 @@ before_script:
   - cd ${TRAVIS_BUILD_DIR}
   # Log the initial Multi config 
   - cat Multiprotocol/_Config.h
+  # Back up the configuration
+  - cp Multiprotocol/_Config.h ./_Config.h.bak
   # Derive the Multi protocols from the Multi source
   - A7105_PROTOCOLS=$(sed -n 's/[\/\/]*[[:blank:]]*#define[[:blank:]]*\([[:alnum:]_]*_A7105_INO\)\(.*\)/\1/p' Multiprotocol/_Config.h)
   - CC2500_PROTOCOLS=$(sed -n 's/[\/\/]*[[:blank:]]*#define[[:blank:]]*\([[:alnum:]_]*_CC2500_INO\)\(.*\)/\1/p' Multiprotocol/_Config.h)
@@ -95,3 +97,81 @@ script:
   #
   # Build each protocol individually
   - buildEachProtocol
+before_deploy:
+  # Create somwhere to put the binaries
+  - mkdir ./binaries
+  # Restore the default configuration
+  - cp ./_Config.h.bak Multiprotocol/_Config.h
+  # Build the release files for OrangeRX
+  - if [[ "$BOARD" =~ "multi4in1:avr:multixmega32d4" ]]; then
+      opt_enable $ALL_PROTOCOLS;
+      opt_disable ORANGE_TX_BLUE;
+      buildMulti;
+      mv build/Multiprotocol.ino.hex ./binaries/Multi-OrangeRX_Green_INV-$TRAVIS_TAG.hex;
+      opt_enable ORANGE_TX_BLUE;
+      buildMulti;
+      mv build/Multiprotocol.ino.hex ./binaries/Multi-OrangeRX_Blue_INV-$TRAVIS_TAG.hex;
+    fi
+  # Build the release files for AVR without bootloader
+  - if [[ "$BOARD" =~ "multi4in1:avr:multiatmega328p:bootloader=none" ]]; then
+      opt_disable CHECK_FOR_BOOTLOADER;
+      opt_disable $ALL_PROTOCOLS;
+      opt_enable $A7105_PROTOCOLS;
+      buildMulti;
+      mv build/Multiprotocol.ino.hex ./binaries/Multi-AVR_USBASP_A7105_INV-$TRAVIS_TAG.hex;
+      opt_disable $ALL_PROTOCOLS;
+      opt_enable $CC2500_PROTOCOLS;
+      buildMulti;
+      mv build/Multiprotocol.ino.hex ./binaries/Multi-AVR_USBASP_CC2500_INV-$TRAVIS_TAG.hex;
+      opt_disable $ALL_PROTOCOLS;
+      opt_enable $CYRF6936_PROTOCOLS;
+      buildMulti;
+      mv build/Multiprotocol.ino.hex ./binaries/Multi-AVR_USBASP_CYRF6936_INV-$TRAVIS_TAG.hex;
+    fi
+  # Build the release files for AVR with bootloader
+  - if [[ "$BOARD" =~ "multi4in1:avr:multiatmega328p:bootloader=optiboot" ]]; then
+      opt_enable CHECK_FOR_BOOTLOADER;
+      opt_disable $ALL_PROTOCOLS;
+      opt_enable $A7105_PROTOCOLS;
+      buildMulti;
+      mv build/Multiprotocol.ino.hex ./binaries/Multi-AVR_TXFLASH_A7105_INV-$TRAVIS_TAG.hex;
+      opt_disable $ALL_PROTOCOLS;
+      opt_enable $CC2500_PROTOCOLS;
+      buildMulti;
+      mv build/Multiprotocol.ino.hex ./binaries/Multi-AVR_TXFLASH_CC2500_INV-$TRAVIS_TAG.hex;
+      opt_disable $ALL_PROTOCOLS;
+      opt_enable $CYRF6936_PROTOCOLS;
+      buildMulti;
+      mv build/Multiprotocol.ino.hex ./binaries/Multi-AVR_TXFLASH_CYRF6936_INV-$TRAVIS_TAG.hex;
+    fi
+  # Build the release files for STM32 without bootloader
+  - if [[ "$BOARD" =~ "multi4in1:STM32F1:multistm32f103c:upload_method=serialMethod" ]]; then
+      opt_disable CHECK_FOR_BOOTLOADER;
+      opt_enable $ALL_PROTOCOLS;
+      buildMulti;
+      mv build/Multiprotocol.ino.bin ./binaries/Multi-STM_FTDI_INV-$TRAVIS_TAG.hex;
+      opt_disable MULTI_STATUS;
+      opt_enable MULTI_TELEMETRY;
+      buildMulti;
+      mv build/Multiprotocol.ino.bin ./binaries/Multi-STM_FTDI_INV_OPENTX-$TRAVIS_TAG.hex;
+    fi
+  # Build the release files for STM32 with bootloader
+  - if [[ "$BOARD" =~ "multi4in1:STM32F1:multistm32f103c:upload_method=TxFlashMethod" ]]; then
+      opt_enable CHECK_FOR_BOOTLOADER;
+      opt_enable $ALL_PROTOCOLS;
+      buildMulti;
+      mv build/Multiprotocol.ino.bin ./binaries/Multi-STM_TXFLASH_INV-$TRAVIS_TAG.hex;
+      opt_disable MULTI_STATUS;
+      opt_enable MULTI_TELEMETRY;
+      buildMulti;
+      mv build/Multiprotocol.ino.bin ./binaries/Multi-STM_TXFLASH_INV_OPENTX-$TRAVIS_TAG.hex;
+    fi
+deploy:
+  provider: releases
+  api_key:
+    secure: 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
+  skip_cleanup: true
+  file_glob: true
+  file: binaries/*
+  on:
+    tags: true