CM211-1 使用6.1内核，DTB使用m302a成功写入EMMC，网络正常 #1318

Ivanriver · 2023-04-23T07:30:41Z

Standard chat template, no routine, no chat.
标准聊天模板，无套路不聊天。

Device Information | 设备信息

SOC: S905L3
Model CM211-1 2+8 无蓝牙无WIFI版本，主板标识：MC016

**Armbian Version | Armbian_23.05.0

Kernel Version: [6.1.25]
Release: Armbian_23.05.0_amlogic_s905l3_jammy_6.1.25_server_2023.04.22

Describe the bug | 问题描述

5.15版本内核版本不做修改可以正常写入EMMC并启动，但是U盘/emmc启动均无网络。
6.1版本内核使用默认dtb可以启动，写入emmc提示成功，但是系统无法启动。
uEnv.txt中dtb改为meson-gxl-s905l3b-m302a.dtb，armbian写入emmc成功启动，网口正常。
写入时选项选择0，
DTB名字填写meson-gxl-s905l3b-m302a.dtb，
UBOOT_OVERLOAD填写：u-boot-p212.bin
MAINLINE_UBOOT和BOOTLOADER_IMG 留空，直接回车安装，磁盘格式选择EXT4

121   s905l3     UNT400G1                       meson-gxl-s905l2-x7-5g.dtb      
122   s905l2     E900v21E                       meson-gxl-s905l2-x7-5g.dtb      
123   s905l3b    IP103H                         meson-gxl-s905l3b-m302a.dtb     
0     Other      Customize                      Enter-custom-dtb-name           

[ OPTIONS ] Please Input ID: 0
Please Input SoC Name(such as s9xxx): s905l3
Please Input DTB Name(such as meson-xxx.dtb): meson-gxl-s905l3b-m302a.dtb
Please Input UBOOT_OVERLOAD Name(such as u-boot-xxx.bin): u-boot-p212.bin
Please Input MAINLINE_UBOOT Name(such as xxx-u-boot.bin.sd.bin):
Please Input BOOTLOADER_IMG Name(such as xxx-bootloader.img):

硬件图片

The text was updated successfully, but these errors were encountered:

ophub · 2023-04-23T07:50:26Z

你下载s905l3b的固件，选择112或者123安装，结果和你上面的相同
你试试s906l3b的6.1内核的固件，选择123安装： https://github.com/ophub/amlogic-s9xxx-armbian/releases/download/Armbian_jammy_04.22.0609/Armbian_23.05.0_amlogic_s905l3b_jammy_6.1.25_server_2023.04.22.img.gz

Ivanriver · 2023-04-23T08:25:53Z

你下载s905l3b的固件，选择112或者123安装，结果和你上面的相同你试试s906l3b的6.1内核的固件，选择123安装： https://github.com/ophub/amlogic-s9xxx-armbian/releases/download/Armbian_jammy_04.22.0609/Armbian_23.05.0_amlogic_s905l3b_jammy_6.1.25_server_2023.04.22.img.gz

使用s905l3b固件无法启动，TTL卡在这里

rebootmode=cold_boot
Starting the controller
 ()
start amlogic old u-boot
 ()
[BL31]: tee size: 0
[BL31]: tee size: 0

ophub · 2023-04-23T09:15:34Z

十分感谢你的分享，根据你的测试结果，添加了 s905l3-cm211 的独立选项，序号 124： 15613ef

你下载测试下
https://github.com/ophub/amlogic-s9xxx-armbian/releases/tag/Armbian_jammy_04.23.0515

Ivanriver · 2023-04-23T10:14:09Z

十分感谢你的分享，根据你的测试结果，添加了 s905l3-cm211 的独立选项，序号 124： 15613ef

你下载测试下 https://github.com/ophub/amlogic-s9xxx-armbian/releases/tag/Armbian_jammy_04.23.0515

非常感谢你的适配！
序号124测试结果：
5.15版本启动网口不可用。
6.1.25内核版本可以直接写入，启动正常，网络正常。但是在断电后有很小几率无法启动，TTL日志如下。
之前在使用其他dtb文件写入EMMC后无法启动也是报这个错误。不过目前日常使用应该问题不大。

U-Boot 2021.04-00056-g13ac02db31-dirty (Apr 28 2021 - 22:52:02 +0800) p212

Model: Amlogic Meson GXL (S905X) P212 Development Board
SoC:   Amlogic Meson Unknown (Unknown) Revision 2a:e (c5:2)
DRAM:  2 GiB
MMC:   mmc@70000: 0, mmc@72000: 1, mmc@74000: 2
Loading Environment from nowhere... OK
In:    serial
Out:   serial
Err:   serial
[BL31]: tee size: 0
[BL31]: tee size: 0
Net:   eth0: ethernet@c9410000
Hit any key to stop autoboot:  0
starting USB...
Bus usb@c9000000: dwc3_meson_gxl_get_phys: usb2 ports: 2
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus usb@c9000000 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
switch to partitions #0, OK
mmc2(part 0) is current device
Scanning mmc 2:1...
Found U-Boot script /boot.scr
1025 bytes read in 1 ms (1001 KiB/s)
## Executing script at 08000000
Start AMLOGIC mainline U-boot
## Error: "bootfromsd" not defined
373 bytes read in 3 ms (121.1 KiB/s)
## Error: "mac" not defined
## Error: "eth_mac" not defined
ethaddr=fa:3b:e6:fa:f4:b9
33321472 bytes read in 737 ms (43.1 MiB/s)
Error reading cluster
** Unable to read file /uInitrd **
Failed to load '/uInitrd'
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
SCRIPT FAILED: continuing...
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Card did not respond to voltage select! : -110
Scanning disk [email protected]...
Disk [email protected] not ready
Card did not respond to voltage select! : -110
Scanning disk [email protected]...
Disk [email protected] not ready
Scanning disk [email protected]...
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
** Can't read partition table on 2:0 **
Found 1 disks
No EFI system partition
BootOrder not defined
EFI boot manager: Cannot load any image
Card did not respond to voltage select! : -110
Speed: 100, full duplex
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 252
*** Unhandled DHCP Option in OFFER/ACK: 252
DHCP client bound to address 192.168.11.17 (6 ms)
*** ERROR: `serverip' not set
Cannot autoload with TFTPGET
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/01-fa-3b-e6-fa-f4-b9
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A80B11
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A80B1
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A80B
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A80
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A8
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0A
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C0
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/C
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-meson-p212
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-meson
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
Speed: 100, full duplex
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
Speed: 100, full duplex
*** ERROR: `serverip' not set
Config file not found
Speed: 100, full duplex
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 252
*** Unhandled DHCP Option in OFFER/ACK: 252
DHCP client bound to address 192.168.11.17 (6 ms)
*** ERROR: `serverip' not set
Cannot autoload with TFTPGET
Speed: 100, full duplex
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 252
*** Unhandled DHCP Option in OFFER/ACK: 252
DHCP client bound to address 192.168.11.17 (6 ms)
*** ERROR: `serverip' not set
Cannot autoload with TFTPGET

ophub · 2023-04-23T12:06:53Z

你这样测试下，USB启动后先不要写入emmc，先把extlinux.conf启用了，重启下看看能正常启动，再armbian-install写入

# 1. 第一次u盘启动后，先启用extlinux
cd /boot/extlinux
mv -f extlinux.conf.bak extlinux.conf
sync
reboot

# 2. 重启后，如果网卡正常工作，再写入
armbian-install

Ivanriver · 2023-04-23T13:17:18Z

你这样测试下，USB启动后先不要写入emmc，先把extlinux.conf启用了，重启下看看能正常启动，再armbian-install写入
# 1. 第一次u盘启动后，先启用extlinux
cd /boot/extlinux
mv -f extlinux.conf.bak extlinux.conf
sync
reboot

# 2. 重启后，如果网卡正常工作，再写入
armbian-install

启用extlinux后可以启动，网口正常，依然有一定概率无法启动

U-Boot 2021.04-00056-g13ac02db31-dirty (Apr 28 2021 - 22:52:02 +0800) p212

Model: Amlogic Meson GXL (S905X) P212 Development Board
SoC:   Amlogic Meson Unknown (Unknown) Revision 2a:e (c5:2)
DRAM:  2 GiB
MMC:   mmc@70000: 0, mmc@72000: 1, mmc@74000: 2
Loading Environment from nowhere... OK
In:    serial
Out:   serial
Err:   serial
[BL31]: tee size: 0
[BL31]: tee size: 0
Net:   eth0: ethernet@c9410000
Hit any key to stop autoboot:  0
starting USB...
Bus usb@c9000000: dwc3_meson_gxl_get_phys: usb2 ports: 2
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus usb@c9000000 for devices... 1 USB Device(s) found
      scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
switch to partitions #0, OK
mmc2(part 0) is current device
Scanning mmc 2:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
400 bytes read in 1 ms (390.6 KiB/s)
1:      Armbian
Retrieving file: /uInitrd
17992815 bytes read in 399 ms (43 MiB/s)
Retrieving file: /zImage
Error reading cluster
** Unable to read file /zImage **
Failed to load '/zImage'
Skipping Armbian for failure retrieving kernel
SCRIPT FAILED: continuing...
** No partition table - mmc 2 **
** No partition table - mmc 2 **
** No partition table - mmc 2 **
** No partition table - mmc 2 **
** No partition table - mmc 2 **
** No partition table - mmc 2 **
** No partition table - mmc 2 **
** No partition table - mmc 2 **
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Card did not respond to voltage select! : -110
Scanning disk [email protected]...
Disk [email protected] not ready
Card did not respond to voltage select! : -110
Scanning disk [email protected]...
Disk [email protected] not ready
Scanning disk [email protected]...
** fs_devread read error - block
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Found 1 disks
No EFI system partition
BootOrder not defined
EFI boot manager: Cannot load any image
** No partition table - mmc 2 **
Speed: 100, full duplex
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 252
*** Unhandled DHCP Option in OFFER/ACK: 252
DHCP client bound to address 192.168.11.17 (6 ms)
*** ERROR: `serverip' not set
Cannot autoload with TFTPGET
missing environment variable: pxeuuid
Retrieving file: /extlinux/pxelinux.cfg/01-fa-3b-e6-fa-f4-b9
Speed: 100, full duplex
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/C0A80B11
Speed: 100, full duplex
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/C0A80B1
Speed: 100, full duplex
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/C0A80B
Speed: 100, full duplex
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/C0A80
Speed: 100, full duplex
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/C0A8
Speed: 100, full duplex
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/C0A
Speed: 100, full duplex
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/C0
Speed: 100, full duplex
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/C
Speed: 100, full duplex
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/default-arm-meson-p212
Speed: 100, full duplex
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/default-arm-meson
Speed: 100, full duplex
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/default-arm
Speed: 100, full duplex
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/default
Speed: 100, full duplex
*** ERROR: `serverip' not set
Config file not found
Speed: 100, full duplex
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 252
*** Unhandled DHCP Option in OFFER/ACK: 252
DHCP client bound to address 192.168.11.17 (6 ms)
*** ERROR: `serverip' not set
Cannot autoload with TFTPGET
Speed: 100, full duplex
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 252
*** Unhandled DHCP Option in OFFER/ACK: 252
DHCP client bound to address 192.168.11.17 (6 ms)
*** ERROR: `serverip' not set
Cannot autoload with TFTPGET
=> Error reading cluster
Unknown command 'Error' - try 'help'
=>

ophub · 2023-04-23T13:33:38Z

你5.15不能启动是缺少u-boot引导，6.1和5.15只有这个u-boot的差别。

在你启用/extlinux/extlinux.conf后错误日志和之前有区别。

# 之前的错误日志
** Unable to read file /uInitrd **
Failed to load '/uInitrd'

# 后来的错误日志
Retrieving file: /zImage
Error reading cluster
** Unable to read file /zImage **
Failed to load '/zImage'

难道是写入了不安全的emmc分区？你看看文档，还原成安卓系统，确认下正确的分区。看12.10
https://github.com/ophub/amlogic-s9xxx-armbian/blob/main/build-armbian/documents/README.cn.md

Ivanriver · 2023-04-23T15:05:12Z

你5.15不能启动是缺少u-boot引导，6.1和5.15只有这个u-boot的差别。

在你启用/extlinux/extlinux.conf后错误日志和之前有区别。
# 之前的错误日志
** Unable to read file /uInitrd **
Failed to load '/uInitrd'

# 后来的错误日志
Retrieving file: /zImage
Error reading cluster
** Unable to read file /zImage **
Failed to load '/zImage'
难道是写入了不安全的emmc分区？你看看文档，还原成安卓系统，确认下正确的分区。看12.10 https://github.com/ophub/amlogic-s9xxx-armbian/blob/main/build-armbian/documents/README.cn.md

这个是安卓系统的分区结构
https://7ji.github.io/ampart-web-reporter/?dsnapshot=logo::33554432:1%20recovery::33554432:1%20rsv::8388608:1%20tee::8388608:1%20crypt::33554432:1%20misc::33554432:1%20instaboot::536870912:1%20boot::33554432:1%20system::1073741824:1%20cache::536870912:2%20params::67108864:2%20ctc::314572800:2%20bootfiles::536870912:2%20data::-1:4&esnapshot=bootloader:0:4194304:0%20reserved:37748736:67108864:0%20cache:113246208:536870912:2%20env:658505728:8388608:0%20logo:675282944:33554432:1%20recovery:717225984:33554432:1%20rsv:759169024:8388608:1%20tee:775946240:8388608:1%20crypt:792723456:33554432:1%20misc:834666496:33554432:1%20instaboot:876609536:536870912:1%20boot:1421869056:33554432:1%20system:1463812096:1073741824:1%20params:2545942528:67108864:2%20bootfiles:2621440000:536870912:2%20swdb:3166699520:16777216:2%20data:3191865344:4282384384:4

根据文档描述，BLANK1大小设定100M，BOOT设定为8+512+8，共528M，BOOT后不可使用分区大小为1M，应该是设定为以下内容

# Set partition size (Unit: MiB)
elif [[ "${AMLOGIC_SOC}" == "s905l3" ]]; then
    BLANK1="100"
    BOOT="528"
    BLANK2="1"

但是armbian-install使用上述参数安装后依旧有一定几率无法启动。后来将boot分区设定为520M，尝试多次均能正常启动。根据文档描述应该是有1M的不可用空间，目前不确定后期使用是否会有影响。

# Set partition size (Unit: MiB)
elif [[ "${AMLOGIC_SOC}" == "s905l3" ]]; then
    BLANK1="100"
    BOOT="520"
    BLANK2="1"

找了下CM211-1的相关资料，发现有多个代工版本，目前没有其他设备测试。参考Issues里的同型号产品，感觉不具有通用性，此贴可以作为后续刷机参考。非常感谢您的帮助！

gametta · 2023-04-23T23:18:49Z

随机不启动的原因貌似以前有人说过，要用btrfs格式，ext4有这个问题，你可以实验一下。

Ivanriver · 2023-04-24T00:33:18Z

随机不启动的原因貌似以前有人说过，要用btrfs格式，ext4有这个问题，你可以实验一下。

测试了btrfs格式，第二次重启就出现无法启动了

ophub · 2023-04-24T00:41:13Z

放弃间隙8M，少用点，多跳点。
用下面的设置试试。先还原安卓系统，再写入才有效。

# Set partition size (Unit: MiB)
elif [[ "${AMLOGIC_SOC}" == "s905l3" ]]; then
    BLANK1="108"
    BOOT="512"
    BLANK2="64"

ophub · 2023-04-24T00:45:57Z

把你刷机用的安卓系统分享一个下载链接，我转存一份。这是带root的吧？安卓版本是9.0？

Ivanriver · 2023-04-24T01:27:29Z

Set partition size (Unit: MiB)

elif [[ "${AMLOGIC_SOC}" == "s905l3" ]]; then
BLANK1="108"
BOOT="512"
BLANK2="64"

昨天设定的BLANK2="1"，执行apt upgrade之后无法启动。
今天修改了分区参数，跳过了那1M的不可用空间，目前使用的分区如下，暂时没有发现异常。

# Set partition size (Unit: MiB)
elif [[ "${AMLOGIC_SOC}" == "s905l3" ]]; then
    BLANK1="100"
    BOOT="520"
    BLANK2="10"

Ivanriver · 2023-04-24T01:32:20Z

把你刷机用的安卓系统分享一个下载链接，我转存一份。这是带root的吧？安卓版本是9.0？

这个安卓系统是4.4版本的，不带root。找到的安卓9的固件开机都不能进入桌面，TTL无法中断。
链接: https://pan.baidu.com/s/1ocsaFuv2ql1V5018Gx4ruA?pwd=6yua
提取码: 6yua

ophub · 2023-04-24T01:46:20Z

不带root，能开启adb，支持usb启动？

安卓估计我转存到这里了： https://github.com/ophub/kernel/releases/tag/tools

Ivanriver · 2023-04-24T02:51:28Z

不带root，能开启adb，支持usb启动？

安卓估计我转存到这里了： https://github.com/ophub/kernel/releases/tag/tools

由于刷机需要拆机，我就直接通过TTL调整了，TTL使用reboot update命令重启会从U盘启动。

shitlime · 2023-07-24T05:33:07Z

按照这个issue操作，写入emmc后，拔掉U盘重启：

GXLX2:BL1:3cfee7:42a5ae;FEAT:ADFC318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 81558

BL2 Built : 13:36:55, Jun 22 2020.
gxl g85d6ad1 - longyong.chen@droid02-sz

Board ID = 4, adc=302
set vcck to 1070 mv
set vddee to 1070 mv
CARD_3 high, old board
CPU clk: 1200MHz

DDR3 chl: Rank0+1 @ 792MHz - FAIL
DDR3 chl: Rank0 @ 792MHz
bist_test rank: 0 29 08 4a 37 14 5a 21 00 42 3e 1c 61 23 03 44 38 15 5b 28 05 4b 38 14 5c 618   - PASS

Rank0: 2048MB(auto)-2T-11
AddrBus test pass!
-s
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x013c0000, size: 0x00007600
Load bl301 from eMMC, src: 0x00018200, des: 0x01380000, size: 0x00002400
Load bl31 from eMMC, src: 0x0001c200, des: 0x10100000, size: 0x00019600
Load bl33 from eMMC, src: 0x00038200, des: 0x01000000, size: 0x0007b000
NOTICE:  BL3-1: v1.0(debug):361f8a7
NOTICE:  BL3-1: Built : 16:43:26, Dec 19 2018
NOTICE:  BL31: GXL normal boot!
NOTICE:  BL31: BL33 decompress pass
[Image: gxl_v1.1.3103-9234004 2018-12-27 10:43:23 yao.zhang@droid07]
efuse init ops = c5
efuse init hdcp = c, cf9=7
x2_hp_e = 0
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipid: 0 0 3 c c 0 70 b3 98 a0 0 c5 not ES chip
[0.645310 Inits done]
INFO:    BL3-1: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9


U-Boot 2015.01 (Mar 29 2021 - 17:09:00)

DRAM:  2 GiB
Relocation Offset is: 76e8c000
this uboot is for hw_1_8, set GPIODV_24gpio: pin GPIODV_24 (gpio 43) value is 1
gpio: pin GPIOZ_14 (gpio 73) value is 1
register usb cfg[0][1] = 0000000077f5bc10
[CANVAS]canvas init
vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters
vpu: clk_level = 7
vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
vpp: vpp_init
boot_device_flag : 1
Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
init bus_cycle=6, bus_timing=7, system=5.0ns
reset failed
get_chip_type and ret:fffffffe
get_chip_type and ret:fffffffe
chip detect failed and ret:fffffffe
nandphy_init failed and ret=0xfffffff1
MMC:   aml_priv->desc_buf = 0x0000000073e7cc00
aml_priv->desc_buf = 0x0000000073e7ef20
SDIO Port B: 0, SDIO Port C: 1
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
init_part() 278: PART_TYPE_DOS
[mmc_init] mmc init success
dtb magic 5f4c4d41
      Amlogic multi-dtb tool
      Multi dtb detected
      unified board, board id = 4
      Multi dtb tool version: v2 .
      Support 6 dtbs.
        aml_dt soc: gxlx2 platform: p291 variant: 2g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxl   plat: p211   vari: 2g
        dtb 2 soc: gxlx   plat: p261   vari: 1g
        dtb 3 soc: gxlx   plat: p261   vari: 2g
        dtb 4 soc: gxlx2   plat: p291   vari: 1g
        dtb 5 soc: gxlx2   plat: p291   vari: 2g
      Find match dtb: 5
start dts,buffer=0000000073e81750,dt_addr=0000000073eb1750
      Amlogic multi-dtb tool
      Multi dtb detected
      unified board, board id = 4
      Multi dtb tool version: v2 .
      Support 6 dtbs.
        aml_dt soc: gxlx2 platform: p291 variant: 2g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxl   plat: p211   vari: 2g
        dtb 2 soc: gxlx   plat: p261   vari: 1g
        dtb 3 soc: gxlx   plat: p261   vari: 2g
        dtb 4 soc: gxlx2   plat: p291   vari: 1g
        dtb 5 soc: gxlx2   plat: p291   vari: 2g
      Find match dtb: 5
parts: 1
00:      data   ffffffffffffffff 4
init_part() 278: PART_TYPE_DOS
eMMC/TSD partition table have been checked OK!
check pattern success
mmc env offset: 0x7400000
In:    serial
Out:   serial
Err:   serial
board id is : 4
hpd_state=0
cvbs performance type = 7, table = 1
[store]To run cmd[emmc dtb_read 0x1000000 0x40000]
_verify_dtb_checksum()-924: calc 5e24f54e, store 5e24f54e
_verify_dtb_checksum()-924: calc 5e24f54e, store 5e24f54e
dtb_read()-1046: total valid 2
dtb_read()-1113: do nothing
      Amlogic multi-dtb tool
      Multi dtb detected
      unified board, board id = 4
      Multi dtb tool version: v2 .
      Support 6 dtbs.
        aml_dt soc: gxlx2 platform: p291 variant: 2g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxl   plat: p211   vari: 2g
        dtb 2 soc: gxlx   plat: p261   vari: 1g
        dtb 3 soc: gxlx   plat: p261   vari: 2g
        dtb 4 soc: gxlx2   plat: p291   vari: 1g
        dtb 5 soc: gxlx2   plat: p291   vari: 2g
      Find match dtb: 5
wipe_data=successful
wipe_cache=successful
_find_partition_by_name()-188: do not find match in table logo
Cannot find dev.
amlmmc cmd <NULL> failed

store - STORE sub-system

Usage:
store store init flag
store read name addr off|partition size
    read 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store write name addr off|partition size
    write 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store rom_write add off size.
        write uboot to the boot device
store erase boot/data:
        erase the area which is uboot or data
store erase partition <partition_name>:
        erase the area which partition in u-boot
store erase dtb
store erase key
store disprotect key
store rom_protect on/off
store scrub off|partition size
        scrub the area from offset and size
store dtb iread/read/write addr <size>
        read/write dtb, size is optional
store key read/write addr <size>
        read/write key, size is optional
store mbr addr
   update mbr/partition table by dtb

cmd store failed
Err imgread(L333):Fail to read 0x2000B from part[logo] at offset 0
There is no valid bmp file at the given address
[OSD]load fb addr from dts
[OSD]fb_addr for logo: 0x3dc00000
[OSD]load fb addr from dts
[OSD]fb_addr for logo: 0x3dc00000
[CANVAS]addr=0x3dc00000 width=3840, height=2160
There is no valid bmp file at the given address
upgrade_step=0
amlkey_init() enter!
[EFUSE_MSG]keynum is 4
[BL31]: tee size: 0
[KM]Error:f[keymanage_dts_get_key_device]L85:ch_code key name is not exist
[KM]Error:f[_get_km_ops_by_name]L231:key ch_code not know device 4
[KM]Error:f[key_manage_query_exist]L546:There isn't dts cfg for key[ch_code]
[KM]Error:f[key_manage_query_size]L503:Fail in query key exist
rebootmode=cold_boot
Enter USB burn
Try connect time out 701, 700, 771
key1 = 7d82dd22
key2 = 7e81dd22
key3 = 728ddd22
time_out = 7a120
ir init
irkey - irkey key_value1 key_value2 key_value3 time_value

Usage:
irkey
Hit any key to stop autoboot:  0
_find_partition_by_name()-188: do not find match in table boot
Cannot find dev.
amlmmc cmd <NULL> failed

store - STORE sub-system

Usage:
store store init flag
store read name addr off|partition size
    read 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store write name addr off|partition size
    write 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store rom_write add off size.
        write uboot to the boot device
store erase boot/data:
        erase the area which is uboot or data
store erase partition <partition_name>:
        erase the area which partition in u-boot
store erase dtb
store erase key
store disprotect key
store rom_protect on/off
store scrub off|partition size
        scrub the area from offset and size
store dtb iread/read/write addr <size>
        read/write dtb, size is optional
store key read/write addr <size>
        read/write key, size is optional
store mbr addr
   update mbr/partition table by dtb

cmd store failed
Err imgread(L132):Fail to read 0x100000B from part[boot] at offset 0
Enter USB burn
Try connect time out 1001, 1000, 2097
card out
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
emmc/sd response timeout, cmd1, status=0x1ff2800
[MSG]mmcinfo failed!
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
emmc/sd response timeout, cmd1, status=0x1ff2800
(Re)start USB...
USB0:   USB3.0 XHCI init start
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
** Bad device usb 0 **
** Bad device usb 0 **
_find_partition_by_name()-188: do not find match in table recovery
Cannot find dev.
amlmmc cmd <NULL> failed

store - STORE sub-system

Usage:
store store init flag
store read name addr off|partition size
    read 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store write name addr off|partition size
    write 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store rom_write add off size.
        write uboot to the boot device
store erase boot/data:
        erase the area which is uboot or data
store erase partition <partition_name>:
        erase the area which partition in u-boot
store erase dtb
store erase key
store disprotect key
store rom_protect on/off
store scrub off|partition size
        scrub the area from offset and size
store dtb iread/read/write addr <size>
        read/write dtb, size is optional
store key read/write addr <size>
        read/write key, size is optional
store mbr addr
   update mbr/partition table by dtb

cmd store failed
Err imgread(L132):Fail to read 0x100000B from part[recovery] at offset 0
gxl_p211_v1#

设备：CM211-1
主板：MC022
镜像：release： Armbian_23.08.0_amlogic_s905l3-cm211_jammy_6.1.39_server_2023.07.20.img.gz

aolin2000 · 2023-07-26T07:49:15Z

可以驱动CM211-1的WIFI了吗？(uew5621ds)

Jake10102016 · 2023-07-30T00:28:28Z

设备：CM211-1，北京移动，闪存颗粒是NAND，U盘可以正常启动，写入成功，从闪存启动无法启动

lisir-77 · 2023-08-07T07:53:47Z

就是可以发个视频给我借鉴一下吗谢谢各位

lanlandezei · 2023-08-14T12:18:17Z

我这款盒子是不是刷不了armbian，线刷安卓没问题，下了各种版本armbian固件s905l s905l3 s905l3b。开心盒子助手adb reboot update 调试U盘启动都启动不了。我的机器dtb是p291，USB写入固件后看都没有p291 这个型号的dtb文件。

664645928 · 2023-09-16T09:44:08Z

121 s905l3 CM211-1 meson-gxl-s905l3b-m302a.dtb
122 s905l3b E900V22D,TY1608 meson-gxl-s905l2-x7-5g.dtb
123 s905l3b E900V21E,E900V22E,MGV2000 meson-gxl-s905l3b-e900v22e.dtb
124 s905l3b M302A,M304A,CM211-1,CM311-1 meson-gxl-s905l3b-m302a.dtb
125 s905l3b IP103H,TY1608,BV310,B860AV-2.1M meson-gxl-s905l3b-m302a.dtb
126 s905lb BesTV-R3300L,SumaVision-Q7,MG101 meson-gxl-s905x-p212.dtb
127 s905lb Q96-mini meson-gxl-s905x-p212.dtb
128 s905mb S65 meson-gxl-s905x-p212.dtb
0 Other Customize Enter-custom-dtb-name

[ OPTIONS ] Please Input ID: 124
[ INFO ] Input Box ID: [ 124 ]
[ INFO ] Model Name: [ M302A,M304A,CM211-1,CM311-1 ]
[ INFO ] FDTFILE: [ meson-gxl-s905l3b-m302a.dtb ]
[ INFO ] MAINLINE_UBOOT: [ ]
[ INFO ] BOOTLOADER_IMG: [ ]
[ INFO ] UBOOT_OVERLOAD: [ u-boot-s905x-s912.bin ]
[ INFO ] NEED_OVERLOAD: [ yes ]
[ STEPS ] Which type of filesystem do you want for your root?

ID TYPE

1 ext4
2 btrfs

[ OPTIONS ] Please Input ID (1/2): 1
[ INFO ] Input Type ID: [ 1 ]
[ INFO ] Type of filesystem: [ ext4 ]
[ STEPS ] Partitioning eMMC...
[ INFO ] Start backing up the default bootloader.
dd: error reading '/dev/mmcblk2': Input/output error
0+0 records in
0+0 records out
0 bytes copied, 1.12973 s, 0.0 kB/s
[ ERROR ] Using dd to backup [ /usr/lib/u-boot/mybox-bootloader.img ] failed.
root@armbian:~#

664645928 · 2023-09-17T06:58:17Z

121 s905l3 CM211-1 介子-gxl-s905l3b-m302a.dtb 122 s905l3b E900V22D，TY1608 介子-gxl-s905l2-x7-5g.dtb 123 s905l3b E900V21E，E900V22E，MGV2000 介子-gxl-s905l3b-e900v22e.dtb 124 s905l3b M302A，M304A，CM211-1，CM311-1 介子-gxl-s905l3b-m302a.dtb 125 s905l3b IP103H，TY1608，BV310，B860AV-2.1M 介子-gxl-s905l3b-m302a.dtb 126 s905lb 百视通-R3300L，苏玛视讯-Q7，MG101 介子-gxl-s905x-p212.dtb

127 s905lb Q96-迷你介子-gxl-s905x-p212.dtb 128 s905mb S65 介子-gxl-s905x-p212.dtb 0 其他自定义输入自定义 dtb

名称

[ 选项 ]请输入 ID： 124 [ 信息 ] 输入框 ID： [ 124 ] [ 信息 ] 型号： [ M302A，M304A，CM211-1，CM311-1 ] [ 信息 ] FDTFILE： [ 介子-gxl-s905l3b-m302a.dtb ] [ 信息 ] MAINLINE_UBOOT： [ ] [ 信息 ] BOOTLOADER_IMG： [ ] [ 信息 ] UBOOT_OVERLOAD： [ u-boot-s905x-s912.bin ] [ 信息 ] NEED_OVERLOAD： [ 是 ]

[ 步骤 ]

您的根需要哪种类型的文件系统？

身份证类型

1 ext4

2 btrfs
[ 选项 ]请输入 ID （1/2）： 1 [ 信息 ] 输入类型 ID： [ 1 ] [ 信息 ] 文件系统类型： [ ext4 ] [ 步骤 ] 正在分区 eMMC... [ 信息 ] 开始备份默认引导加载程序。 dd：读取错误 '/dev/mmcblk2'：输入/输出错误 0+0 记录 0+0 记录输出 0 字节复制， 1.12973 s， 0.0 kB/s [ 错误 ] 使用 dd 备份 [ /usr/lib/u-boot/mybox-bootloader.img ] 失败。 root@armbian：~#

拆机查看，闪存是NAND，是不是就没法写入了？必须emmc的芯片才行？

ophub · 2023-09-17T07:04:01Z

不支持nand

664645928 · 2023-09-17T07:07:46Z

不支持nand

拆机看了好几个，山东魔百盒cm211-1，闪存都是nand，山东UNT402A也是nand，哭死。。。。

bo138088 · 2023-10-18T14:42:06Z

按照这个issue操作，写入emmc后，拔掉U盘重启：

GXLX2:BL1:3cfee7:42a5ae;FEAT:ADFC318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 81558

BL2 Built : 13:36:55, Jun 22 2020.
gxl g85d6ad1 - longyong.chen@droid02-sz

Board ID = 4, adc=302
set vcck to 1070 mv
set vddee to 1070 mv
CARD_3 high, old board
CPU clk: 1200MHz

DDR3 chl: Rank0+1 @ 792MHz - FAIL
DDR3 chl: Rank0 @ 792MHz
bist_test rank: 0 29 08 4a 37 14 5a 21 00 42 3e 1c 61 23 03 44 38 15 5b 28 05 4b 38 14 5c 618   - PASS

Rank0: 2048MB(auto)-2T-11
AddrBus test pass!
-s
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x013c0000, size: 0x00007600
Load bl301 from eMMC, src: 0x00018200, des: 0x01380000, size: 0x00002400
Load bl31 from eMMC, src: 0x0001c200, des: 0x10100000, size: 0x00019600
Load bl33 from eMMC, src: 0x00038200, des: 0x01000000, size: 0x0007b000
NOTICE:  BL3-1: v1.0(debug):361f8a7
NOTICE:  BL3-1: Built : 16:43:26, Dec 19 2018
NOTICE:  BL31: GXL normal boot!
NOTICE:  BL31: BL33 decompress pass
[Image: gxl_v1.1.3103-9234004 2018-12-27 10:43:23 yao.zhang@droid07]
efuse init ops = c5
efuse init hdcp = c, cf9=7
x2_hp_e = 0
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipid: 0 0 3 c c 0 70 b3 98 a0 0 c5 not ES chip
[0.645310 Inits done]
INFO:    BL3-1: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9


U-Boot 2015.01 (Mar 29 2021 - 17:09:00)

DRAM:  2 GiB
Relocation Offset is: 76e8c000
this uboot is for hw_1_8, set GPIODV_24gpio: pin GPIODV_24 (gpio 43) value is 1
gpio: pin GPIOZ_14 (gpio 73) value is 1
register usb cfg[0][1] = 0000000077f5bc10
[CANVAS]canvas init
vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters
vpu: clk_level = 7
vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
vpp: vpp_init
boot_device_flag : 1
Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
init bus_cycle=6, bus_timing=7, system=5.0ns
reset failed
get_chip_type and ret:fffffffe
get_chip_type and ret:fffffffe
chip detect failed and ret:fffffffe
nandphy_init failed and ret=0xfffffff1
MMC:   aml_priv->desc_buf = 0x0000000073e7cc00
aml_priv->desc_buf = 0x0000000073e7ef20
SDIO Port B: 0, SDIO Port C: 1
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
init_part() 278: PART_TYPE_DOS
[mmc_init] mmc init success
dtb magic 5f4c4d41
      Amlogic multi-dtb tool
      Multi dtb detected
      unified board, board id = 4
      Multi dtb tool version: v2 .
      Support 6 dtbs.
        aml_dt soc: gxlx2 platform: p291 variant: 2g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxl   plat: p211   vari: 2g
        dtb 2 soc: gxlx   plat: p261   vari: 1g
        dtb 3 soc: gxlx   plat: p261   vari: 2g
        dtb 4 soc: gxlx2   plat: p291   vari: 1g
        dtb 5 soc: gxlx2   plat: p291   vari: 2g
      Find match dtb: 5
start dts,buffer=0000000073e81750,dt_addr=0000000073eb1750
      Amlogic multi-dtb tool
      Multi dtb detected
      unified board, board id = 4
      Multi dtb tool version: v2 .
      Support 6 dtbs.
        aml_dt soc: gxlx2 platform: p291 variant: 2g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxl   plat: p211   vari: 2g
        dtb 2 soc: gxlx   plat: p261   vari: 1g
        dtb 3 soc: gxlx   plat: p261   vari: 2g
        dtb 4 soc: gxlx2   plat: p291   vari: 1g
        dtb 5 soc: gxlx2   plat: p291   vari: 2g
      Find match dtb: 5
parts: 1
00:      data   ffffffffffffffff 4
init_part() 278: PART_TYPE_DOS
eMMC/TSD partition table have been checked OK!
check pattern success
mmc env offset: 0x7400000
In:    serial
Out:   serial
Err:   serial
board id is : 4
hpd_state=0
cvbs performance type = 7, table = 1
[store]To run cmd[emmc dtb_read 0x1000000 0x40000]
_verify_dtb_checksum()-924: calc 5e24f54e, store 5e24f54e
_verify_dtb_checksum()-924: calc 5e24f54e, store 5e24f54e
dtb_read()-1046: total valid 2
dtb_read()-1113: do nothing
      Amlogic multi-dtb tool
      Multi dtb detected
      unified board, board id = 4
      Multi dtb tool version: v2 .
      Support 6 dtbs.
        aml_dt soc: gxlx2 platform: p291 variant: 2g
        dtb 0 soc: gxl   plat: p211   vari: 1g
        dtb 1 soc: gxl   plat: p211   vari: 2g
        dtb 2 soc: gxlx   plat: p261   vari: 1g
        dtb 3 soc: gxlx   plat: p261   vari: 2g
        dtb 4 soc: gxlx2   plat: p291   vari: 1g
        dtb 5 soc: gxlx2   plat: p291   vari: 2g
      Find match dtb: 5
wipe_data=successful
wipe_cache=successful
_find_partition_by_name()-188: do not find match in table logo
Cannot find dev.
amlmmc cmd <NULL> failed

store - STORE sub-system

Usage:
store store init flag
store read name addr off|partition size
    read 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store write name addr off|partition size
    write 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store rom_write add off size.
        write uboot to the boot device
store erase boot/data:
        erase the area which is uboot or data
store erase partition <partition_name>:
        erase the area which partition in u-boot
store erase dtb
store erase key
store disprotect key
store rom_protect on/off
store scrub off|partition size
        scrub the area from offset and size
store dtb iread/read/write addr <size>
        read/write dtb, size is optional
store key read/write addr <size>
        read/write key, size is optional
store mbr addr
   update mbr/partition table by dtb

cmd store failed
Err imgread(L333):Fail to read 0x2000B from part[logo] at offset 0
There is no valid bmp file at the given address
[OSD]load fb addr from dts
[OSD]fb_addr for logo: 0x3dc00000
[OSD]load fb addr from dts
[OSD]fb_addr for logo: 0x3dc00000
[CANVAS]addr=0x3dc00000 width=3840, height=2160
There is no valid bmp file at the given address
upgrade_step=0
amlkey_init() enter!
[EFUSE_MSG]keynum is 4
[BL31]: tee size: 0
[KM]Error:f[keymanage_dts_get_key_device]L85:ch_code key name is not exist
[KM]Error:f[_get_km_ops_by_name]L231:key ch_code not know device 4
[KM]Error:f[key_manage_query_exist]L546:There isn't dts cfg for key[ch_code]
[KM]Error:f[key_manage_query_size]L503:Fail in query key exist
rebootmode=cold_boot
Enter USB burn
Try connect time out 701, 700, 771
key1 = 7d82dd22
key2 = 7e81dd22
key3 = 728ddd22
time_out = 7a120
ir init
irkey - irkey key_value1 key_value2 key_value3 time_value

Usage:
irkey
Hit any key to stop autoboot:  0
_find_partition_by_name()-188: do not find match in table boot
Cannot find dev.
amlmmc cmd <NULL> failed

store - STORE sub-system

Usage:
store store init flag
store read name addr off|partition size
    read 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store write name addr off|partition size
    write 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store rom_write add off size.
        write uboot to the boot device
store erase boot/data:
        erase the area which is uboot or data
store erase partition <partition_name>:
        erase the area which partition in u-boot
store erase dtb
store erase key
store disprotect key
store rom_protect on/off
store scrub off|partition size
        scrub the area from offset and size
store dtb iread/read/write addr <size>
        read/write dtb, size is optional
store key read/write addr <size>
        read/write key, size is optional
store mbr addr
   update mbr/partition table by dtb

cmd store failed
Err imgread(L132):Fail to read 0x100000B from part[boot] at offset 0
Enter USB burn
Try connect time out 1001, 1000, 2097
card out
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
emmc/sd response timeout, cmd1, status=0x1ff2800
[MSG]mmcinfo failed!
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
emmc/sd response timeout, cmd1, status=0x1ff2800
(Re)start USB...
USB0:   USB3.0 XHCI init start
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
** Bad device usb 0 **
** Bad device usb 0 **
_find_partition_by_name()-188: do not find match in table recovery
Cannot find dev.
amlmmc cmd <NULL> failed

store - STORE sub-system

Usage:
store store init flag
store read name addr off|partition size
    read 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store write name addr off|partition size
    write 'size' bytes starting at offset 'off'
    to/from memory address 'addr', skipping bad blocks.
store rom_write add off size.
        write uboot to the boot device
store erase boot/data:
        erase the area which is uboot or data
store erase partition <partition_name>:
        erase the area which partition in u-boot
store erase dtb
store erase key
store disprotect key
store rom_protect on/off
store scrub off|partition size
        scrub the area from offset and size
store dtb iread/read/write addr <size>
        read/write dtb, size is optional
store key read/write addr <size>
        read/write key, size is optional
store mbr addr
   update mbr/partition table by dtb

cmd store failed
Err imgread(L132):Fail to read 0x100000B from part[recovery] at offset 0
gxl_p211_v1#

设备：CM211-1 主板：MC022 镜像：release： Armbian_23.08.0_amlogic_s905l3-cm211_jammy_6.1.39_server_2023.07.20.img.gz

一模一样的主板MC022 搞定了吗？

wi86live · 2023-10-28T19:43:40Z

不支持nand

拆机看了好几个，山东魔百盒cm211-1，闪存都是nand，山东UNT402A也是nand，哭死。。。。

看NAND 如果是BGA169封装的话在手机上拆个16gb的EMMC换上去就行了

wi86live · 2023-12-11T17:41:40Z

你是什么盒子?自身存储440GB? 2GB的内存?S905L3b 我推荐试试 Armbian_23.11.0_amlogic_s905l3b_lunar_5.15.137_server_2023.11.02.img.gz<https://github.com/wi86live/amlogic-s9xxx-armbian/releases/download/Armbian_lunar_save_2023.11/Armbian_23.11.0_amlogic_s905l3b_lunar_5.15.137_server_2023.11.02.img.gz>,我的盒子刷的盒子是天邑TY1608,测试后这个最稳定 ,新内核可能是CPU 带不动

…

________________________________ 发件人: chinamememe ***@***.***> 发送时间: 2023年12月6日 11:44 收件人: ophub/amlogic-s9xxx-armbian ***@***.***> 抄送: wi86live ***@***.***>; Comment ***@***.***> 主题: Re: [ophub/amlogic-s9xxx-armbian] CM211-1 使用6.1内核，DTB使用m302a成功写入EMMC，网络正常 (Issue #1318) 1701862940648.jpg (view on web)<https://github.com/ophub/amlogic-s9xxx-armbian/assets/10960816/d0374062-cd3d-4cb2-87b5-359426ce5090> 一直重复 ― Reply to this email directly, view it on GitHub<#1318 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AP4YQV75VDXQVSXUL3ZP2O3YIBLBPAVCNFSM6AAAAAAXILKOJGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNBSG4YDSOJUGM>. You are receiving this because you commented.Message ID: ***@***.***>

skygunner · 2024-02-23T12:52:59Z

设备：CM211-1，北京移动，闪存颗粒是NAND，U盘可以正常启动，写入成功，从闪存启动无法启动

北京移动MC022主板上的BWCMMQ511G08G存储芯片是狭义的NAND，支持emmc协议。经过armbian-install可以成功安装并启动。
5.15

[ OPTIONS ] Please Input ID: 121
[ INFO ] Input Box ID: [ 121 ]
[ INFO ] Model Name: [ CM211-1,M411A ]
[ INFO ] FDTFILE: [ meson-gxl-s905l3b-m302a.dtb ]
[ INFO ] MAINLINE_UBOOT: [  ]
[ INFO ] BOOTLOADER_IMG:  [  ]
[ INFO ] UBOOT_OVERLOAD: [ u-boot-p212.bin ]
[ INFO ] NEED_OVERLOAD: [ no ]

gaonan1212 · 2024-04-21T03:13:51Z

Armbian_24.5.0_amlogic_s905l3-cm211_jammy_6.1.87_server_2024.04.20.img
cm211-1，u盘启动盒子绿灯，屏幕无输出没进安卓，网口一直检测不到，不知道该咋操作了
之前u盘启动只成功过openwrt系统，想搞armbian写入emmc，我的存储芯片是BWCMMQ511G08G，带wifi

ophub · 2024-04-21T03:41:27Z

先刷下对应的安卓系统。

gaonan1212 · 2024-04-21T11:03:03Z

Armbian_24.5.0_amlogic_s905l3-cm211_jammy_6.1.87_server_2024.04.20.img cm211-1，u盘启动盒子绿灯，屏幕无输出没进安卓，网口一直检测不到，不知道该咋操作了之前u盘启动只成功过openwrt系统，想搞armbian写入emmc，我的存储芯片是BWCMMQ511G08G，带wifi

我搞定了，cm211-1s zg，广东移动
我先刷的安卓9线刷包：S905L3 安卓9.0当贝语音版（通刷mgv3001 211-1 CM311-1)设置无密码带原生设置20220711.img
拆机短接在背面4r12，检测到设备后就不用再短接了，中途有失败可以马上调整擦除选项继续刷

刷完进安卓9开wifi，用开心电视助手连adb
armbian使用：Armbian_24.5.0_amlogic_s905l3-cm211_bookworm_6.6.28_server_2024.04.20.img
写入u盘，用开心电视助手从u盘启动，然后顺利ssh，顺利armbian-install

sr9158 · 2024-05-11T06:27:30Z

Armbian_24.5.0_amlogic_s905l3-cm211_jammy_6.1.87_server_2024.04.20.img cm211-1，u盘启动盒子绿灯，屏幕无输出没进安卓，网口一直检测不到，不知道该咋操作了之前u盘启动只成功过openwrt系统，想搞armbian写入emmc，我的存储芯片是BWCMMQ511G08G，带wifi

我搞定了，cm211-1s zg，广东移动我先刷的安卓9线刷包：S905L3 安卓9.0当贝语音版（通刷mgv3001 211-1 CM311-1)设置无密码带原生设置20220711.img 拆机短接在背面4r12，检测到设备后就不用再短接了，中途有失败可以马上调整擦除选项继续刷刷完进安卓9开wifi，用开心电视助手连adb armbian使用：Armbian_24.5.0_amlogic_s905l3-cm211_bookworm_6.6.28_server_2024.04.20.img 写入u盘，用开心电视助手从u盘启动，然后顺利ssh，顺利armbian-install

请问armbian下WIFI能用吗？

gametta · 2024-05-13T23:49:49Z

您好：首先905系列的可以用刷机神奇，PDD上有几块钱，不用拆机，另外如果盒子自带wifi就可以使用，如果不带可以外插一个随身WIFI，驱动一般都可以。在 2024-05-11 14:27:53，"sr9158" ***@***.***> 写道： Armbian_24.5.0_amlogic_s905l3-cm211_jammy_6.1.87_server_2024.04.20.img cm211-1，u盘启动盒子绿灯，屏幕无输出没进安卓，网口一直检测不到，不知道该咋操作了之前u盘启动只成功过openwrt系统，想搞armbian写入emmc，我的存储芯片是BWCMMQ511G08G，带wifi 我搞定了，cm211-1s zg，广东移动我先刷的安卓9线刷包：S905L3 安卓9.0当贝语音版（通刷mgv3001 211-1 CM311-1)设置无密码带原生设置20220711.img 拆机短接在背面4r12，检测到设备后就不用再短接了，中途有失败可以马上调整擦除选项继续刷刷完进安卓9开wifi，用开心电视助手连adb armbian使用：Armbian_24.5.0_amlogic_s905l3-cm211_bookworm_6.6.28_server_2024.04.20.img 写入u盘，用开心电视助手从u盘启动，然后顺利ssh，顺利armbian-install 请问armbian下WIFI能用吗？ — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: ***@***.***>

lkber · 2024-08-16T19:13:36Z

Device Information | 设备信息
SOC: S905L3
Model CM211-1 2+8 云南移动 WIFI版本，主板标识：MC022
gxlx2_p291_2g
**Armbian Version | Armbian_24.08.01

Kernel Version: [6.6.43]
Release: Armbian_24.08.01_amlogic_s905l3_jammy_6.6.43_server_2024.08.01
uENV：meson-gxl-s905l3b-m302a.dtb
S905L3 安卓9.0当贝语音版（通刷mgv3001 211-1 CM311-1)设置无密码带原生设置20220711.img(安卓4无法启动，安卓9卡界面不用管，看路由器ip，直接adb连接，adb shell reboot update就进系统，看路由器里有armbian字样就成了，ssh连接后完工）。

u盘启动成功，HDMI无输出黑屏，刷入emmc成功，黑屏，有线可用，uwe5621dsWIFI没有驱动。

ophub added documentation Improvements or additions to documentation support This need is supported new box Research Fills in the Blanks labels Apr 23, 2023

ophub closed this as completed Apr 27, 2023

ophub mentioned this issue Jul 5, 2023

魔百和CM211-1 S905l-3 网卡不识别 #1519

Closed

qingniaoheyu mentioned this issue Mar 29, 2024

CM211-1 MC022可以烧录EMMC启动，但是网络异常 #2196

Closed

CM211-1 使用6.1内核，DTB使用m302a成功写入EMMC，网络正常 #1318

CM211-1 使用6.1内核，DTB使用m302a成功写入EMMC，网络正常 #1318

Comments

Ivanriver commented Apr 23, 2023 • edited Loading

ophub commented Apr 23, 2023 • edited Loading

Ivanriver commented Apr 23, 2023

ophub commented Apr 23, 2023

Ivanriver commented Apr 23, 2023

ophub commented Apr 23, 2023 • edited Loading

Ivanriver commented Apr 23, 2023

ophub commented Apr 23, 2023

Ivanriver commented Apr 23, 2023 • edited Loading

gametta commented Apr 23, 2023

Ivanriver commented Apr 24, 2023

ophub commented Apr 24, 2023 • edited Loading

ophub commented Apr 24, 2023

Ivanriver commented Apr 24, 2023

Set partition size (Unit: MiB)

Ivanriver commented Apr 24, 2023

ophub commented Apr 24, 2023 • edited Loading

Ivanriver commented Apr 24, 2023

shitlime commented Jul 24, 2023

aolin2000 commented Jul 26, 2023

Jake10102016 commented Jul 30, 2023

lisir-77 commented Aug 7, 2023

lanlandezei commented Aug 14, 2023

664645928 commented Sep 16, 2023

ID TYPE

1 ext4 2 btrfs

664645928 commented Sep 17, 2023

身份证类型

1 ext4

ophub commented Sep 17, 2023

664645928 commented Sep 17, 2023

bo138088 commented Oct 18, 2023

wi86live commented Oct 28, 2023

wi86live commented Dec 11, 2023 via email

skygunner commented Feb 23, 2024 • edited Loading

gaonan1212 commented Apr 21, 2024

ophub commented Apr 21, 2024

gaonan1212 commented Apr 21, 2024

sr9158 commented May 11, 2024

gametta commented May 13, 2024 via email

lkber commented Aug 16, 2024 • edited Loading

Ivanriver commented Apr 23, 2023 •

edited

Loading

ophub commented Apr 23, 2023 •

edited

Loading

ophub commented Apr 23, 2023 •

edited

Loading

Ivanriver commented Apr 23, 2023 •

edited

Loading

ophub commented Apr 24, 2023 •

edited

Loading

ophub commented Apr 24, 2023 •

edited

Loading

1 ext4
2 btrfs

skygunner commented Feb 23, 2024 •

edited

Loading

lkber commented Aug 16, 2024 •

edited

Loading