Fix typos in tests/

Thanks a lot for patch review to
@freqlabs and @behlendorf

Signed-off-by: Andrea Gelmini <[email protected]>

tests/zfs-tests/tests/functional/cli_root/zpool_add/zpool_add.kshlib

@@ -90,7 +90,7 @@ function find_mnttab_dev
 }
 
 #
-# Save the systme current dump device configuration
+# Save the system current dump device configuration
 #
 function save_dump_dev
 {

tests/zfs-tests/tests/functional/cli_root/zpool_create/zpool_create.shlib

@@ -146,7 +146,7 @@ function find_vfstab_dev
 }
 
 #
-# Save the systme current dump device configuration
+# Save the system current dump device configuration
 #
 function save_dump_dev
 {

tests/zfs-tests/tests/functional/cli_root/zpool_create/zpool_create_005_pos.ksh

@@ -95,7 +95,7 @@ do
 		log_must zpool create $opt $TESTPOOL ${pooltype[i]} \
 			$file.1 $file.2 $file.3
 		! poolexists $TESTPOOL && \
-			log_fail "Createing pool with $opt fails."
+			log_fail "Creating pool with $opt fails."
 		mpt=`zfs mount | egrep "^$TESTPOOL[^/]" | awk '{print $2}'`
 		(( ${#mpt} == 0 )) && \
 			log_fail "$TESTPOOL created with $opt is not mounted."
@@ -105,12 +105,12 @@ do
 				from the output of zfs mount"
 		if [[ "$opt" == "-m $TESTDIR1" ]]; then
 			[[ ! -d $TESTDIR1 ]] && \
-				log_fail "$TESTDIR1 is not created auotmatically."
+				log_fail "$TESTDIR1 is not created automatically."
 			[[ "$mpt" != "$TESTDIR1" ]] && \
 				log_fail "$TESTPOOL is not mounted on $TESTDIR1."
 		elif [[ "$opt" == "-R $TESTDIR1" ]]; then
 			[[ ! -d $TESTDIR1/$TESTPOOL ]] && \
-				log_fail "$TESTDIR1/$TESTPOOL is not created auotmatically."
+				log_fail "$TESTDIR1/$TESTPOOL is not created automatically."
 			[[ "$mpt" != "$TESTDIR1/$TESTPOOL" ]] && \
 				log_fail "$TESTPOOL is not mounted on $TESTDIR1/$TESTPOOL."
 		else

tests/zfs-tests/tests/functional/cli_root/zpool_create/zpool_create_016_pos.ksh

@@ -41,7 +41,7 @@
 # STRATEGY:
 # 1. delete all devices in the swap
 # 2. create a zpool
-# 3. Verify the creation is successed.
+# 3. Verify the creation was successful
 #
 
 verify_runnable "global"

tests/zfs-tests/tests/functional/cli_root/zpool_events/zpool_events_clear.ksh

@@ -34,7 +34,7 @@ log_assert "'zpool events -c' should successfully clear events."
 # 1. Clear all ZFS events
 # This is needed because we may already over the max number or events queued
 # (zfs_zevent_len_max) generated by previous tests: generating $EVENTS_NUM new
-# events and then counting them is racy and leads to failues, so start from 0.
+# events and then counting them is racy and leads to failures, so start from 0.
 log_must zpool events -c
 
 # 2. Generate some new ZFS events

tests/zfs-tests/tests/functional/cli_root/zpool_history/zpool_history_001_neg.ksh

@@ -38,7 +38,7 @@
 #
 # STRATEGY:
 #	1. Create pool, volume & snap
-#	2. Verify 'zpool history' can cope with incorret arguments.
+#	2. Verify 'zpool history' can cope with incorrect arguments.
 #
 
 verify_runnable "global"

tests/zfs-tests/tests/functional/cli_root/zpool_import/import_rewind_config_changed.ksh

@@ -115,7 +115,7 @@ function test_common
 	# further than the time that we took the checkpoint.
 	#
 	# Note that, ideally we would want to take a checkpoint
-	# right after we recond the txg we plan to rewind to.
+	# right after we record the txg we plan to rewind to.
 	# But since we can't attach, detach or remove devices
 	# while having a checkpoint, we take it after the
 	# operation that changes the config.

tests/zfs-tests/tests/functional/cli_root/zpool_import/zpool_import_missing_002_pos.ksh

@@ -54,7 +54,7 @@
 #	3. Export the test pool.
 #	4. Move one or more device files to other directory
 #	5. Verify 'zpool import -d' with the new directory
-#	   will handle moved files successfullly.
+#	   will handle moved files successfully.
 #	   Using the various combinations.
 #		- Regular import
 #		- Alternate Root Specified

tests/zfs-tests/tests/functional/cli_root/zpool_labelclear/zpool_labelclear_active.ksh

@@ -24,8 +24,8 @@
 # STRATEGY:
 # 1. Create the pool with log device.
 # 2. Try clearing the label on data and log devices.
-# 3. Add auxilary (cache/spare) vdevs.
-# 4. Try clearing the label on auxilary vdevs.
+# 3. Add auxiliary (cache/spare) vdevs.
+# 4. Try clearing the label on auxiliary vdevs.
 # 5. Check that zpool labelclear will return non-zero and
 #    labels are intact.
 

tests/zfs-tests/tests/functional/cli_root/zpool_labelclear/zpool_labelclear_exported.ksh

@@ -26,8 +26,8 @@
 # 2. Export the pool.
 # 3. Check that zpool labelclear returns non-zero when trying to
 #    clear the label on ACTIVE vdevs, and succeeds with -f.
-# 4. Add auxilary vdevs (cache/spare).
-# 5. Check that zpool labelclear succeeds on auxilary vdevs of
+# 4. Add auxiliary vdevs (cache/spare).
+# 5. Check that zpool labelclear succeeds on auxiliary vdevs of
 #    exported pool.
 
 verify_runnable "global"
@@ -44,7 +44,7 @@ log_assert "zpool labelclear will fail on ACTIVE vdevs of exported pool and" \
 for vdevtype in "" "cache" "spare"; do
 	# Create simple pool, skip any mounts
 	log_must zpool create -O mountpoint=none -f $TESTPOOL $disk1 log $disk2
-	# Add auxilary vdevs (cache/spare)
+	# Add auxiliary vdevs (cache/spare)
 	if [[ -n $vdevtype ]]; then
 		log_must zpool add $TESTPOOL $vdevtype $disk3
 	fi
@@ -63,7 +63,7 @@ for vdevtype in "" "cache" "spare"; do
 	log_must zpool labelclear -f $disk2
 	log_mustnot zdb -lq $disk2
 
-	# Check that labelclear on auxilary vdevs will succeed
+	# Check that labelclear on auxiliary vdevs will succeed
 	if [[ -n $vdevtype ]]; then
 		log_must zpool labelclear $disk3
 		log_mustnot zdb -lq $disk3

tests/zfs-tests/tests/functional/cli_root/zpool_upgrade/zpool_upgrade_007_pos.ksh

@@ -42,7 +42,7 @@
 #
 # STRATEGY:
 # 1. Import pools of all versions
-# 2. Setup a test enviorment over the old pools.
+# 2. Setup a test environment over the old pools.
 # 3. Verify the commands related to 'zfs upgrade' succeed as expected.
 #
 

tests/zfs-tests/tests/functional/cli_user/misc/setup.ksh

@@ -34,7 +34,7 @@
 
 # This setup script is moderately complex, as it creates scenarios for all
 # of the tests included in this directory. Usually we'd want each test case
-# to setup/teardown it's own configuration, but this would be time consuming
+# to setup/teardown its own configuration, but this would be time consuming
 # given the nature of these tests. However, as a side-effect, one test
 # leaving the system in an unknown state could impact other test cases.
 

tests/zfs-tests/tests/functional/cli_user/misc/zpool_online_001_neg.ksh

@@ -49,7 +49,7 @@ function check_for_online
 		 | grep ONLINE )
 	if [ -n "$RESULT" ]
 	then
-		log_fail "A disk was brough online!"
+		log_fail "A disk was brought online!"
 	fi
 }
 

tests/zfs-tests/tests/functional/cli_user/zpool_iostat/zpool_iostat_005_pos.ksh

@@ -68,7 +68,7 @@ for i in $files ; do
 	test_zpool_script "$i" "$testpool" "zpool iostat -Pv -c"
 done
 
-# Test that we can run multiple scripts separated with a commma by running
+# Test that we can run multiple scripts separated with a comma by running
 # all the scripts in a single -c line.
 allscripts="$(echo $scripts | sed -r 's/[[:blank:]]+/,/g')"
 test_zpool_script "$allscripts" "$testpool" "zpool iostat -Pv -c"

tests/zfs-tests/tests/functional/cli_user/zpool_status/zpool_status_003_pos.ksh

@@ -68,7 +68,7 @@ for i in $files ; do
 	test_zpool_script "$i" "$testpool" "zpool status -P -c"
 done
 
-# Test that we can run multiple scripts separated with a commma by running
+# Test that we can run multiple scripts separated with a comma by running
 # all the scripts in a single -c line.
 allscripts="$(echo $scripts | sed -r 's/[[:blank:]]+/,/g')"
 test_zpool_script "$allscripts" "$testpool" "zpool status -P -c"