Metric Observer instrument specification (refinement)

text/0008-metric-observer.md

@@ -1,6 +1,6 @@
 # Metrics observer specification
 
-**Status:** `proposed`
+**Status:** Superceded entirely by [0072-metric-observer](0072-metric-observer.md)
 
 Propose metric `Observer` callbacks for context-free access to current Gauge instrument values on demand.
 

text/0072-metric-observer.md

@@ -0,0 +1,183 @@
+# Metric observer specification (refinement)
+
+The metric observer gauge was described in [OTEP
+0008](0008-metric-observer.md) but left out of the current metrics
+specification because the prior OTEP did not clarify the valid calling
+conventions for observer gauge metric instruments.  This proposal
+completely replaces OTEP 0008.
+
+## Motivation
+
+An [earlier version of the metrics specification](
+https://github.com/open-telemetry/opentelemetry-specification/blob/597718b3fcfaf10bcf45d93f99b66f94a28048cb/specification/api-metrics.md)
+described metric callbacks as an alternate means of generating metric
+events, allowing the application to generate metric events only as
+often as desired by the collection interval.  It specified this
+support for all instrument kinds.
+
+This proposal restores the ability to use callbacks only with a
+dedicated `Observer` kind of instrument with the same semantics as
+Gauge instruments.  Like a Gauge instrument, Observer instruments are
+used to report the current value of a variable.
+
+We may ask, why should Observer instruments be a first-class part of
+the API, as opposed to simply registering non-instrument-specific
+callbacks to call user-level code on the metrics collection interval?
+That would permit the use of ordinary Gauge instruments as a stand-in
+for the Observer instrument proposed here.  The approach proposed here
+is more flexible because it permits the Meter implementation to
+control the collection interval on a per-instrument basis as well as
+to disable instruments.
+
+## Explanation
+
+Gauge metric instruments are typically used to reflect properties that
+are pre-computed or instantaneously read by a system, where the
+measurement interval is arbitrary.  When selecting a Gauge, as opposed
+to the Counter or measure kind of metric instrument, there could be
+significant computational cost in computing or reading the current
+value.  When this is the case, it is understandable that we are
+interested in providing values on demand, as an optimization.
+
+The optimization aspect of Observer instruments is critical to their
+purpose.  If the simpler alternative suggested above--registering
+non-instrument-specific callbacks--were implemented instead, callers
+would demand a way to ask whether an instrument was "recording" or
+not, similar to the [`Span.IsRecording`
+API](https://github.com/open-telemetry/opentelemetry-specification/blob/master/specification/api-tracing.md#isrecording).
+
+Observer instruments are semantically equivalent to gauge instruments,
+except they support callbacks instead of a `Set()` operation.
+Observer callbacks support `Observe()` instead.  Why support callbacks
+with Gauge semantics but not do the same for Counter and Measure
+semantics?
+
+### Why not Measure callbacks?
+
+Measure instruments, by definition, carry information about the
+individual measurements, so there is no benefit to be had in deferring
+evaluation to a callback.  Observer callbacks are designed to reduce
+the number of measurements, which is incompatible with the semantics
+of Measure instruments.
+
+### Why not Counter callbacks?
+
+Counter instruments can be expressed as Observer instruments when they
+are expensive to pre-compute or will be instantaneously read.  There
+are two ways these can be treated using Observer instrument semantics.
+
+Observer instruments, like Gauge instruments, use a "last value"
+aggregation by default.  With this default interpretation in mind, a
+monotonic Counter can be expressed as a monotonic Observer instrument
+simply by reporting the current sum from `Observe()`, in which case
+the "last value" may be interpreted directly as a sum.  Systems with
+support for rate calculations over current sums (e.g., Prometheus)
+will be able to use these metrics directly.  Non-monotonic Counters
+may be expressed as their current value, but they cannot meaningfully
+be aggregated in this way.
+
+The preferred way to `Observe()` Counter-like data from an Observer
+instrument callback is to report deltas in the callback and configure
+a Sum aggregation in the exporter.  Data reported in this way will
+support rate calculations just as if they were true Counters.
+
+### Differences between Gauge and Observer
+
+One significant difference between gauges that are explicitly `Set()`,
+as compared with observer callbacks, is that `Set()` happens inside a
+context (i.e., its distributed context), whereas the observer callback
+does not execute with any distributed context.  
+
+Whereas Gauge values do have context at the moment `Set()` is called,
+Observer callbacks do not.  Observer instruments are appropriate for
+reporting values that are not request specific.
+
+## Details
+
+Observer instruments are semantically equivalent to Gauge instruments
+but use different calling conventions.  Use the language-specific
+constructor for an Observer instrument (e.g.,
+`metric.NewFloat64Observer()`).  Observer instruments support the
+`Monotonic` and `NonMonotonic` options, the same as Gauge instruments.
+
+Callbacks should avoid blocking.  The implementation may be required
+to cancel computation if the callback blocks for too long.
+
+Callbacks must not be called synchronously with application code via
+any OpenTelemetry API.  This prevents the application from potentially
+deadlocking itself by being called synchronously from its own thread.
+Implementations that cannot provide this guarantee should prefer not
+to implement Observer instrsuments.
+
+Callbacks may be called synchronously in the SDK on behalf of an
+exporter, provided it does not contradict the requirement above.
+
+Callbacks should avoid calling OpenTelemetry APIs other than the
+interface provided to `Observe()`.  This prevents the SDK from
+potentially deadlocking itself by being called synchronously from its
+own thread.  We recognize this may be impossible or expensive to
+enforce.  SDKs should document how they respond to such attempts at
+re-entry.
+
+### Observer calling conventions
+
+Observer callbacks are called with an `ObserverResult`, an interface
+that supports capturing events directly in the callback, as follows.
+
+To capture an observation with a specific `LabelSet`, call the
+`ObserverResult` directly using `ObserverResult.Observe(value,
+LabelSet)`.
+
+There is no equivalent of a "bound" observer instrument as there is
+with Counter, Gauge, and Measure instruments.  A bound calling
+convention is not needed for Observer instruments because there is
+little if any performance benefit in doing so (as Observer instruments
+are called during collection, there is no need to maintain "active"
+records concurrent with collection).
+
+Multiple observations are permitted in a single callback invocation.
+
+The `ObserverResult` passed to a callback should not be used outside the
+invocation to which it is passed.
+
+#### One callback per instrument
+
+The API _could_ support registering independent callbacks tied to
+registered ("bound") label sets, instead it takes the approach of
+supporting one callback per instrument.  There are two cases to
+consider: (a) where the source of an instrument's values provides one
+value at a time, (b) where the source of an instrument's values
+provides several values at once.
+
+The decision to support one callback per instrument is justified
+because it is relatively easy in case (a) above to call the source
+multiple times for multiple values, while it is relatively difficult
+in case (b) above to call the source once and report values from
+multiple callbacks.
+
+### Pseudocode
+
+An example:
+
+```
+class YourClass {
+  private static final Meter meter = ...;
+  private static final ObserverDouble cpuLoad = ...;
+
+  void init() {
+    cpuLoad.setCallback(
+        new ObserverDouble.Callback<ObserverDouble.Result>() {
+          @Override
+          public void update(Result result) {
+              result.Observe(getCPULoad(), meter.createLabelSet("low_power", isLowPowerMode()));
+        });
+  }
+}
+```
+
+## Trade-offs and mitigations
+
+Callbacks are a relatively dangerous programming pattern, which may
+require care to avoid deadlocks between the application and the API or
+the SDK.  Implementations SHOULD consider preventing deadlocks through
+any means that are safe and economical.