Update docs to state Kubernetes v1.11 is needed

Closes: vmware-tanzu#2856

Signed-off-by: Nolan Brubaker <[email protected]>

site/content/docs/main/basic-install.md

@@ -6,9 +6,10 @@ layout: docs
 Use this doc to get a basic installation of Velero.
 Refer [this document](customize-installation.md) to customize your installation.
 
+
 ## Prerequisites
 
-- Access to a Kubernetes cluster, v1.10 or later, with DNS and container networking enabled.
+- Access to a Kubernetes cluster, v1.11 or later, with DNS and container networking enabled.
 - `kubectl` installed locally
 
 Velero uses object storage to store backups and associated artifacts. It also optionally integrates with supported block storage systems to snapshot your persistent volumes. Before beginning the installation process, you should identify the object storage provider and optional block storage provider(s) you'll be using from the list of [compatible providers][0].
@@ -21,6 +22,7 @@ Velero does not officially support Windows. In testing, the Velero team was able
 
 If you want to perform your own testing of Velero on Windows, you must deploy Velero as a Windows container. Velero does not provide official Windows images, but its possible for you to build your own Velero Windows container image to use. Note that you must build this image on a Windows node.
 
+
 ## Install the CLI
 
 ### Option 1: macOS - Homebrew
@@ -50,6 +52,7 @@ On Windows, you can use [Chocolatey](https://chocolatey.org/install) to install
 choco install velero
 ```
 
+
 ## Install and configure the server components
 
 There are two supported methods for installing the Velero server components:
@@ -71,3 +74,4 @@ Please refer to [this part of the documentation][5].
 [3]: overview-plugins.md
 [4]: customize-installation.md#install-an-additional-volume-snapshot-provider
 [5]: customize-installation.md#optional-velero-cli-configurations
+

site/content/docs/main/contributions/tencent-config.md

@@ -11,7 +11,7 @@ You can deploy Velero on Tencent [TKE](https://cloud.tencent.com/document/produc
 
 - Registered [Tencent Cloud Account](https://cloud.tencent.com/register).
 -  [Tencent Cloud COS](https://console.cloud.tencent.com/cos) service, referred to as COS, has been launched
-- A Kubernetes cluster has been created, cluster version v1.10 or later, and the cluster can use DNS and Internet services normally. If you need to create a TKE cluster, refer to the Tencent [create a cluster](https://cloud.tencent.com/document/product/457/32189) documentation.
+- A Kubernetes cluster has been created, cluster version v1.11 or later, and the cluster can use DNS and Internet services normally. If you need to create a TKE cluster, refer to the Tencent [create a cluster](https://cloud.tencent.com/document/product/457/32189) documentation.
 
 ## Create a Tencent Cloud COS bucket
 

site/content/docs/main/restic.md

@@ -24,7 +24,7 @@ cross-volume-type data migrations.
 
 - Understand how Velero performs [backups with the restic integration](#how-backup-and-restore-work-with-restic).
 - [Download][3] the latest Velero release.
-- Kubernetes v1.10.0 and later. Velero's restic integration requires the Kubernetes [MountPropagation feature][6], which is enabled by default in Kubernetes v1.10.0 and later.
+- Kubernetes v1.11.0 and later. Velero's restic integration requires the Kubernetes [MountPropagation feature][6], which is enabled by default in Kubernetes v1.11.0 and later.
 
 ### Install restic
 
@@ -526,3 +526,4 @@ To solve this, a controller was written by Thomann Bits&Beats: [velero-pvc-watch
 [8]: https://docs.microsoft.com/en-us/azure/aks/azure-files-dynamic-pv
 [9]: https://github.com/restic/restic/issues/1800
 [11]: customize-installation.md#default-pod-volume-backup-to-restic
+

site/content/docs/main/tilt.md

@@ -19,7 +19,7 @@ files in this directory are gitignored so you may configure your setup according
 
 ## Prerequisites
 1. [Docker](https://docs.docker.com/install/) v19.03 or newer
-1. A Kubernetes cluster v1.10 or greater (does not have to be Kind)
+1. A Kubernetes cluster v1.11 or greater (does not have to be Kind)
 1. [Tilt](https://docs.tilt.dev/install.html) v0.12.0 or newer
 1. Clone the [Velero project](https://github.com/vmware-tanzu/velero) repository
    locally

site/content/docs/v1.6/basic-install.md

@@ -8,7 +8,7 @@ Refer [this document](customize-installation.md) to customize your installation.
 
 ## Prerequisites
 
-- Access to a Kubernetes cluster, v1.10 or later, with DNS and container networking enabled.
+- Access to a Kubernetes cluster, v1.11 or later, with DNS and container networking enabled.
 - `kubectl` installed locally
 
 Velero uses object storage to store backups and associated artifacts. It also optionally integrates with supported block storage systems to snapshot your persistent volumes. Before beginning the installation process, you should identify the object storage provider and optional block storage provider(s) you'll be using from the list of [compatible providers][0].

site/content/docs/v1.6/contributions/tencent-config.md

@@ -11,7 +11,7 @@ You can deploy Velero on Tencent [TKE](https://cloud.tencent.com/document/produc
 
 - Registered [Tencent Cloud Account](https://cloud.tencent.com/register).
 -  [Tencent Cloud COS](https://console.cloud.tencent.com/cos) service, referred to as COS, has been launched
-- A Kubernetes cluster has been created, cluster version v1.10 or later, and the cluster can use DNS and Internet services normally. If you need to create a TKE cluster, refer to the Tencent [create a cluster](https://cloud.tencent.com/document/product/457/32189) documentation.
+- A Kubernetes cluster has been created, cluster version v1.11 or later, and the cluster can use DNS and Internet services normally. If you need to create a TKE cluster, refer to the Tencent [create a cluster](https://cloud.tencent.com/document/product/457/32189) documentation.
 
 ## Create a Tencent Cloud COS bucket
 

site/content/docs/v1.6/restic.md

@@ -24,7 +24,7 @@ cross-volume-type data migrations.
 
 - Understand how Velero performs [backups with the restic integration](#how-backup-and-restore-work-with-restic).
 - [Download][3] the latest Velero release.
-- Kubernetes v1.10.0 and later. Velero's restic integration requires the Kubernetes [MountPropagation feature][6], which is enabled by default in Kubernetes v1.10.0 and later.
+- Kubernetes v1.11.0 and later. Velero's restic integration requires the Kubernetes [MountPropagation feature][6], which is enabled by default in Kubernetes v1.11.0 and later.
 
 ### Install restic
 

site/content/docs/v1.6/tilt.md

@@ -19,7 +19,7 @@ files in this directory are gitignored so you may configure your setup according
 
 ## Prerequisites
 1. [Docker](https://docs.docker.com/install/) v19.03 or newer
-1. A Kubernetes cluster v1.10 or greater (does not have to be Kind)
+1. A Kubernetes cluster v1.11 or greater (does not have to be Kind)
 1. [Tilt](https://docs.tilt.dev/install.html) v0.12.0 or newer
 1. Clone the [Velero project](https://github.com/vmware-tanzu/velero) repository
    locally