format code according to conventions [skip ci]

drivers/oled/oled_driver.c

@@ -447,7 +447,7 @@ void oled_pan(bool left) {
 oled_buffer_reader_t oled_read_raw(uint16_t start_index) {
     if (start_index > OLED_MATRIX_SIZE) start_index = OLED_MATRIX_SIZE;
     oled_buffer_reader_t ret_reader;
-    ret_reader.current_element = &oled_buffer[start_index];
+    ret_reader.current_element         = &oled_buffer[start_index];
     ret_reader.remaining_element_count = OLED_MATRIX_SIZE - start_index;
     return ret_reader;
 }

drivers/oled/oled_driver.h

@@ -155,7 +155,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 
 typedef struct __attribute__((__packed__)) {
-    uint8_t  *current_element;
+    uint8_t *current_element;
     uint16_t remaining_element_count;
 } oled_buffer_reader_t;
 

keyboards/handwired/onekey/keymaps/joystick/config.h

@@ -1,4 +1,4 @@
-#pragma once
+#pragma once
 
 #define JOYSTICK_AXES_COUNT 2
 #define JOYSTICK_BUTTON_COUNT 1

keyboards/handwired/onekey/keymaps/joystick/rules.mk

@@ -1 +1 @@
-JOYSTICK_ENABLE = analog
+JOYSTICK_ENABLE = analog

quantum/process_keycode/process_auto_shift.c

@@ -41,34 +41,34 @@ void autoshift_flush(void) {
 }
 
 void autoshift_on(uint16_t keycode) {
-  autoshift_time    = timer_read();
-  autoshift_lastkey = keycode;
+    autoshift_time    = timer_read();
+    autoshift_lastkey = keycode;
 }
 
 void autoshift_toggle(void) {
-  if (autoshift_enabled) {
-    autoshift_enabled = false;
-    autoshift_flush();
-  } else {
-    autoshift_enabled = true;
-  }
+    if (autoshift_enabled) {
+        autoshift_enabled = false;
+        autoshift_flush();
+    } else {
+        autoshift_enabled = true;
+    }
 }
 
 void autoshift_enable(void) { autoshift_enabled = true; }
 void autoshift_disable(void) {
-  autoshift_enabled = false;
-  autoshift_flush();
+    autoshift_enabled = false;
+    autoshift_flush();
 }
 
-#ifndef AUTO_SHIFT_NO_SETUP
+#    ifndef AUTO_SHIFT_NO_SETUP
 void autoshift_timer_report(void) {
-  char display[8];
+    char display[8];
 
-  snprintf(display, 8, "\n%d\n", autoshift_timeout);
+    snprintf(display, 8, "\n%d\n", autoshift_timeout);
 
-  send_string((const char *)display);
+    send_string((const char *)display);
 }
-#endif
+#    endif
 
 bool get_autoshift_state(void) { return autoshift_enabled; }
 
@@ -79,7 +79,6 @@ void set_autoshift_timeout(uint16_t timeout) { autoshift_timeout = timeout; }
 bool process_auto_shift(uint16_t keycode, keyrecord_t *record) {
     if (record->event.pressed) {
         switch (keycode) {
-
             case KC_ASTG:
                 autoshift_toggle();
                 return true;
@@ -92,10 +91,10 @@ bool process_auto_shift(uint16_t keycode, keyrecord_t *record) {
                 return true;
 
 #    ifndef AUTO_SHIFT_NO_SETUP
-                case KC_ASUP:
+            case KC_ASUP:
                 autoshift_timeout += 5;
                 return true;
-                case KC_ASDN:
+            case KC_ASDN:
                 autoshift_timeout -= 5;
                 return true;
 

quantum/process_keycode/process_combo.c

@@ -27,7 +27,7 @@ extern int      COMBO_LEN;
 __attribute__((weak)) void process_combo_event(uint16_t combo_index, bool pressed) {}
 
 static uint16_t timer               = 0;
-static uint16_t  current_combo_index = 0;
+static uint16_t current_combo_index = 0;
 static bool     drop_buffer         = false;
 static bool     is_active           = false;
 static bool     b_combo_enable      = true;  // defaults to enabled
@@ -82,7 +82,7 @@ static inline void dump_key_buffer(bool emit) {
     } while (0)
 
 static bool process_single_combo(combo_t *combo, uint16_t keycode, keyrecord_t *record) {
-    uint8_t count = 0;
+    uint8_t  count = 0;
     uint16_t index = -1;
     /* Find index of keycode and number of combo keys */
     for (const uint16_t *keys = combo->keys;; ++count) {

quantum/process_keycode/process_joystick.c

@@ -17,8 +17,7 @@ bool process_joystick(uint16_t keycode, keyrecord_t *record) {
     return true;
 }
 
-__attribute__((weak))
-void joystick_task(void) {
+__attribute__((weak)) void joystick_task(void) {
     if (process_joystick_analogread() && (joystick_status.status & JS_UPDATED)) {
         send_joystick_packet(&joystick_status);
         joystick_status.status &= ~JS_UPDATED;
@@ -47,16 +46,11 @@ uint16_t savePinState(pin_t pin) {
     return ((PORTx_ADDRESS(pin) >> pinNumber) & 0x1) << 1 | ((DDRx_ADDRESS(pin) >> pinNumber) & 0x1);
 #elif defined(PROTOCOL_CHIBIOS)
     /*
-    The pin configuration is backed up in the following format : 
+    The pin configuration is backed up in the following format :
  bit  15    9  8   7   6  5  4   3     2    1 0
       |unused|ODR|IDR|PUPDR|OSPEEDR|OTYPER|MODER|
     */
-    return  (( PAL_PORT(pin)->MODER   >> (2*PAL_PAD(pin))) & 0x3)
-          | (((PAL_PORT(pin)->OTYPER  >> (1*PAL_PAD(pin))) & 0x1) << 2) 
-          | (((PAL_PORT(pin)->OSPEEDR >> (2*PAL_PAD(pin))) & 0x3) << 3)
-          | (((PAL_PORT(pin)->PUPDR   >> (2*PAL_PAD(pin))) & 0x3) << 5)
-          | (((PAL_PORT(pin)->IDR     >> (1*PAL_PAD(pin))) & 0x1) << 7)
-          | (((PAL_PORT(pin)->ODR     >> (1*PAL_PAD(pin))) & 0x1) << 8);
+    return ((PAL_PORT(pin)->MODER >> (2 * PAL_PAD(pin))) & 0x3) | (((PAL_PORT(pin)->OTYPER >> (1 * PAL_PAD(pin))) & 0x1) << 2) | (((PAL_PORT(pin)->OSPEEDR >> (2 * PAL_PAD(pin))) & 0x3) << 3) | (((PAL_PORT(pin)->PUPDR >> (2 * PAL_PAD(pin))) & 0x3) << 5) | (((PAL_PORT(pin)->IDR >> (1 * PAL_PAD(pin))) & 0x1) << 7) | (((PAL_PORT(pin)->ODR >> (1 * PAL_PAD(pin))) & 0x1) << 8);
 #else
     return 0;
 #endif
@@ -68,12 +62,12 @@ void restorePinState(pin_t pin, uint16_t restoreState) {
     PORTx_ADDRESS(pin) = (PORTx_ADDRESS(pin) & ~_BV(pinNumber)) | (((restoreState >> 1) & 0x1) << pinNumber);
     DDRx_ADDRESS(pin)  = (DDRx_ADDRESS(pin) & ~_BV(pinNumber)) | ((restoreState & 0x1) << pinNumber);
 #elif defined(PROTOCOL_CHIBIOS)
-    PAL_PORT(pin)->MODER  =  (PAL_PORT(pin)->MODER   & ~(0x3<< (2*PAL_PAD(pin)))) | (restoreState & 0x3)     << (2*PAL_PAD(pin));
-    PAL_PORT(pin)->OTYPER =  (PAL_PORT(pin)->OTYPER  & ~(0x1<< (1*PAL_PAD(pin)))) | ((restoreState>>2) & 0x1) << (1*PAL_PAD(pin));
-    PAL_PORT(pin)->OSPEEDR=  (PAL_PORT(pin)->OSPEEDR & ~(0x3<< (2*PAL_PAD(pin)))) | ((restoreState>>3) & 0x3) << (2*PAL_PAD(pin));
-    PAL_PORT(pin)->PUPDR  =  (PAL_PORT(pin)->PUPDR   & ~(0x3<< (2*PAL_PAD(pin)))) | ((restoreState>>5) & 0x3) << (2*PAL_PAD(pin));
-    PAL_PORT(pin)->IDR    =  (PAL_PORT(pin)->IDR     & ~(0x1<< (1*PAL_PAD(pin)))) | ((restoreState>>7) & 0x1) << (1*PAL_PAD(pin));
-    PAL_PORT(pin)->ODR    =  (PAL_PORT(pin)->ODR     & ~(0x1<< (1*PAL_PAD(pin)))) | ((restoreState>>8) & 0x1) << (1*PAL_PAD(pin));
+    PAL_PORT(pin)->MODER   = (PAL_PORT(pin)->MODER & ~(0x3 << (2 * PAL_PAD(pin)))) | (restoreState & 0x3) << (2 * PAL_PAD(pin));
+    PAL_PORT(pin)->OTYPER  = (PAL_PORT(pin)->OTYPER & ~(0x1 << (1 * PAL_PAD(pin)))) | ((restoreState >> 2) & 0x1) << (1 * PAL_PAD(pin));
+    PAL_PORT(pin)->OSPEEDR = (PAL_PORT(pin)->OSPEEDR & ~(0x3 << (2 * PAL_PAD(pin)))) | ((restoreState >> 3) & 0x3) << (2 * PAL_PAD(pin));
+    PAL_PORT(pin)->PUPDR   = (PAL_PORT(pin)->PUPDR & ~(0x3 << (2 * PAL_PAD(pin)))) | ((restoreState >> 5) & 0x3) << (2 * PAL_PAD(pin));
+    PAL_PORT(pin)->IDR     = (PAL_PORT(pin)->IDR & ~(0x1 << (1 * PAL_PAD(pin)))) | ((restoreState >> 7) & 0x1) << (1 * PAL_PAD(pin));
+    PAL_PORT(pin)->ODR     = (PAL_PORT(pin)->ODR & ~(0x1 << (1 * PAL_PAD(pin)))) | ((restoreState >> 8) & 0x1) << (1 * PAL_PAD(pin));
 #else
     return;
 #endif
@@ -132,21 +126,21 @@ bool process_joystick_analogread_quantum() {
         int16_t axis_val = joystick_axes[axis_index].mid_digit;
 #    endif
 
-        //test the converted value against the lower range
-        int32_t ref = joystick_axes[axis_index].mid_digit;
-        int32_t range = joystick_axes[axis_index].min_digit;
-        int32_t ranged_val = ((axis_val - ref) * -127) / (range - ref) ;
+        // test the converted value against the lower range
+        int32_t ref        = joystick_axes[axis_index].mid_digit;
+        int32_t range      = joystick_axes[axis_index].min_digit;
+        int32_t ranged_val = ((axis_val - ref) * -127) / (range - ref);
 
         if (ranged_val > 0) {
-            //the value is in the higher range
-            range = joystick_axes[axis_index].max_digit;
+            // the value is in the higher range
+            range      = joystick_axes[axis_index].max_digit;
             ranged_val = ((axis_val - ref) * 127) / (range - ref);
         }
-        
-        //clamp the result in the valid range
+
+        // clamp the result in the valid range
         ranged_val = ranged_val < -127 ? -127 : ranged_val;
         ranged_val = ranged_val > 127 ? 127 : ranged_val;
-        
+
         if (ranged_val != joystick_status.axes[axis_index]) {
             joystick_status.axes[axis_index] = ranged_val;
             joystick_status.status |= JS_UPDATED;

quantum/rgblight.c

@@ -407,7 +407,6 @@ void rgblight_decrease_val_helper(bool write_to_eeprom) {
 void rgblight_decrease_val_noeeprom(void) { rgblight_decrease_val_helper(false); }
 void rgblight_decrease_val(void) { rgblight_decrease_val_helper(true); }
 
-
 void rgblight_increase_speed_helper(bool write_to_eeprom) {
     if (rgblight_config.speed < 3) rgblight_config.speed++;
     // RGBLIGHT_SPLIT_SET_CHANGE_HSVS; // NEED?
@@ -428,7 +427,6 @@ void rgblight_decrease_speed_helper(bool write_to_eeprom) {
 void rgblight_decrease_speed(void) { rgblight_decrease_speed_helper(true); }
 void rgblight_decrease_speed_noeeprom(void) { rgblight_decrease_speed_helper(false); }
 
-
 void rgblight_sethsv_noeeprom_old(uint8_t hue, uint8_t sat, uint8_t val) {
     if (rgblight_config.enable) {
         LED_TYPE tmp_led;
@@ -1170,17 +1168,17 @@ void rgblight_effect_knight(animation_status_t *anim) {
  */
 void rgblight_effect_christmas(animation_status_t *anim) {
     static int8_t increment = 1;
-    const uint8_t max_pos = 32;
+    const uint8_t max_pos   = 32;
     const uint8_t hue_green = 85;
 
     uint32_t xa;
-    uint8_t hue, val;
-    uint8_t i;
+    uint8_t  hue, val;
+    uint8_t  i;
 
     // The effect works by animating anim->pos from 0 to 32 and back to 0.
     // The pos is used in a cubic bezier formula to ease-in-out between red and green, leaving the interpolated colors visible as short as possible.
-    xa = CUBED((uint32_t) anim->pos);
-    hue = ((uint32_t) hue_green) * xa / (xa + CUBED((uint32_t) (max_pos - anim->pos)));
+    xa  = CUBED((uint32_t)anim->pos);
+    hue = ((uint32_t)hue_green) * xa / (xa + CUBED((uint32_t)(max_pos - anim->pos)));
     // Additionally, these interpolated colors get shown with a slightly darker value, to make them less prominent than the main colors.
     val = 255 - (3 * (hue < hue_green / 2 ? hue : hue_green - hue) / 2);
 

tmk_core/common/action_layer.h

@@ -82,9 +82,9 @@ void layer_on(uint8_t layer);
 void layer_off(uint8_t layer);
 void layer_invert(uint8_t layer);
 /* bitwise operation */
-void layer_or(layer_state_t state);
-void layer_and(layer_state_t state);
-void layer_xor(layer_state_t state);
+void          layer_or(layer_state_t state);
+void          layer_and(layer_state_t state);
+void          layer_xor(layer_state_t state);
 layer_state_t layer_state_set_user(layer_state_t state);
 layer_state_t layer_state_set_kb(layer_state_t state);
 #else
@@ -107,7 +107,6 @@ layer_state_t layer_state_set_kb(layer_state_t state);
 #    define layer_state_set_user(state) (void)state
 #endif
 
-
 /* pressed actions cache */
 #if !defined(NO_ACTION_LAYER) && !defined(STRICT_LAYER_RELEASE)
 

tmk_core/common/mousekey.c

@@ -33,8 +33,8 @@ inline int8_t times_inv_sqrt2(int8_t x) {
 
 static report_mouse_t mouse_report = {0};
 static void           mousekey_debug(void);
-static uint8_t        mousekey_accel  = 0;
-static uint8_t        mousekey_repeat = 0;
+static uint8_t        mousekey_accel        = 0;
+static uint8_t        mousekey_repeat       = 0;
 static uint8_t        mousekey_wheel_repeat = 0;
 
 #ifndef MK_3_SPEED
@@ -225,7 +225,6 @@ void mousekey_on(uint8_t code) {
         mousekey_accel |= (1 << 1);
     else if (code == KC_MS_ACCEL2)
         mousekey_accel |= (1 << 2);
-
 }
 
 void mousekey_off(uint8_t code) {
@@ -284,10 +283,10 @@ uint16_t        w_intervals[mkspd_COUNT] = {MK_W_INTERVAL_UNMOD, MK_W_INTERVAL_0
 void mousekey_task(void) {
     // report cursor and scroll movement independently
     report_mouse_t const tmpmr = mouse_report;
-    mouse_report.x = 0;
-    mouse_report.y = 0;
-    mouse_report.v = 0;
-    mouse_report.h = 0;
+    mouse_report.x             = 0;
+    mouse_report.y             = 0;
+    mouse_report.v             = 0;
+    mouse_report.h             = 0;
 
     if ((tmpmr.x || tmpmr.y) && timer_elapsed(last_timer_c) > c_intervals[mk_speed]) {
         mouse_report.x = tmpmr.x;
@@ -421,10 +420,10 @@ void mousekey_send(void) {
 }
 
 void mousekey_clear(void) {
-    mouse_report    = (report_mouse_t){};
-    mousekey_repeat = 0;
+    mouse_report          = (report_mouse_t){};
+    mousekey_repeat       = 0;
     mousekey_wheel_repeat = 0;
-    mousekey_accel  = 0;
+    mousekey_accel        = 0;
 }
 
 static void mousekey_debug(void) {

tmk_core/common/progmem.h

@@ -4,7 +4,7 @@
 #    include <avr/pgmspace.h>
 #else
 #    define PROGMEM
-#    define PGM_P const char *
+#    define PGM_P const char*
 #    define memcpy_P(dest, src, n) memcpy(dest, src, n)
 #    define pgm_read_byte(address_short) *((uint8_t*)(address_short))
 #    define pgm_read_word(address_short) *((uint16_t*)(address_short))

tmk_core/protocol/chibios/usb_main.c

@@ -888,39 +888,43 @@ void virtser_task(void) {
 void send_joystick_packet(joystick_t *joystick) {
     joystick_report_t rep = {
 #    if JOYSTICK_AXES_COUNT > 0
-        .axes = {joystick->axes[0],
+        .axes =
+            {
+                joystick->axes[0],
 
 #        if JOYSTICK_AXES_COUNT >= 2
-                 joystick->axes[1],
+                joystick->axes[1],
 #        endif
 #        if JOYSTICK_AXES_COUNT >= 3
-                 joystick->axes[2],
+                joystick->axes[2],
 #        endif
 #        if JOYSTICK_AXES_COUNT >= 4
-                 joystick->axes[3],
+                joystick->axes[3],
 #        endif
 #        if JOYSTICK_AXES_COUNT >= 5
-                 joystick->axes[4],
+                joystick->axes[4],
 #        endif
 #        if JOYSTICK_AXES_COUNT >= 6
-                 joystick->axes[5],
+                joystick->axes[5],
 #        endif
-        },
+            },
 #    endif  // JOYSTICK_AXES_COUNT>0
 
 #    if JOYSTICK_BUTTON_COUNT > 0
-        .buttons = {joystick->buttons[0],
+        .buttons =
+            {
+                joystick->buttons[0],
 
 #        if JOYSTICK_BUTTON_COUNT > 8
-                    joystick->buttons[1],
+                joystick->buttons[1],
 #        endif
 #        if JOYSTICK_BUTTON_COUNT > 16
-                    joystick->buttons[2],
+                joystick->buttons[2],
 #        endif
 #        if JOYSTICK_BUTTON_COUNT > 24
-                    joystick->buttons[3],
+                joystick->buttons[3],
 #        endif
-        }
+            }
 #    endif  // JOYSTICK_BUTTON_COUNT>0
     };
 

tmk_core/protocol/lufa/adafruit_ble.h

@@ -41,12 +41,12 @@ extern bool adafruit_ble_send_keys(uint8_t hid_modifier_mask, uint8_t *keys, uin
  * (milliseconds) */
 extern bool adafruit_ble_send_consumer_key(uint16_t keycode, int hold_duration);
 
-#    ifdef MOUSE_ENABLE
+#ifdef MOUSE_ENABLE
 /* Send a mouse/wheel movement report.
  * The parameters are signed and indicate positive of negative direction
  * change. */
 extern bool adafruit_ble_send_mouse_move(int8_t x, int8_t y, int8_t scroll, int8_t pan, uint8_t buttons);
-#    endif
+#endif
 
 /* Compute battery voltage by reading an analog pin.
  * Returns the integer number of millivolts */