New template for Alcatel AOS: show linkagg port

ntc_templates/templates/alcatel_aos_show_linkagg_port.textfsm

@@ -0,0 +1,15 @@
+Value INTERFACE (\S+)
+Value AGGREGATE_TYPE (\S+)
+Value SNMP_ID (\d+)
+Value STATUS (\S+)
+Value AGGREGATE (\d+)
+Value OPERATIONAL_STATUS (\S+)
+Value LINK_STATUS (\S+)
+Value PRIMARY (\S+)
+
+Start
+  ^\s*(?:Chassis\/)?Slot\/Port\s*Aggregate\s*SNMP\s*Id\s*Status\s*Agg\s*Oper\s*Link\s*Prim\s*$$
+  ^\s*-+
+  ^\s*${INTERFACE}\s*${AGGREGATE_TYPE}\s*${SNMP_ID}\s*${STATUS}\s*${AGGREGATE}\s*${OPERATIONAL_STATUS}\s*${LINK_STATUS}\s*${PRIMARY}\s*$$ -> Record
+  ^\s*$$
+  ^.*$$ -> Error

ntc_templates/templates/index

@@ -16,6 +16,7 @@ alcatel_aos_show_interfaces_status.textfsm, .*, alcatel_aos, sh[[ow]] in[[terfac
 alcatel_aos_show_mac-address-table.textfsm, .*, alcatel_aos, sh[[ow]] mac-(a[[ddress-table]]|l[[earning]])
 alcatel_aos_show_interfaces_port.textfsm, .*, alcatel_aos, sh[[ow]] in[[terfaces]] p[[ort]]
 alcatel_aos_show_port-security.textfsm, .*, alcatel_aos, sh[[ow]] port-[[security]]
+alcatel_aos_show_linkagg_port.textfsm, .*, alcatel_aos, sh[[ow]] li[[nkagg]] po[[rt]]
 alcatel_aos_show_vlan_port.textfsm, .*, alcatel_aos, sh[[ow]] vl[[an]] (p[[ort]]|m[[embers]])
 alcatel_aos_show_chassis.textfsm, .*, alcatel_aos, sh[[ow]] ch[[assis]]
 alcatel_aos_show_system.textfsm, .*, alcatel_aos, sh[[ow]] sy[[stem]]

tests/alcatel_aos/show_linkagg_port/alcatel_aos_show_linkagg_port_R6.raw

@@ -0,0 +1,7 @@
+
+Slot/Port Aggregate SNMP Id   Status   Agg  Oper Link Prim
+---------+---------+-------+----------+----+----+----+----
+   1/1    Dynamic     1000  ATTACHED     1  UP   UP   YES
+   1/2    Dynamic     1001  ATTACHED     1  UP   UP   NO 
+   1/3    Dynamic     1002  ATTACHED     2  UP   UP   YES
+   1/4    Dynamic     1003  ATTACHED     2  UP   UP   NO 

tests/alcatel_aos/show_linkagg_port/alcatel_aos_show_linkagg_port_R6.yml

@@ -0,0 +1,34 @@
+---
+parsed_sample:
+  - aggregate: "1"
+    aggregate_type: "Dynamic"
+    interface: "1/1"
+    link_status: "UP"
+    operational_status: "UP"
+    primary: "YES"
+    snmp_id: "1000"
+    status: "ATTACHED"
+  - aggregate: "1"
+    aggregate_type: "Dynamic"
+    interface: "1/2"
+    link_status: "UP"
+    operational_status: "UP"
+    primary: "NO"
+    snmp_id: "1001"
+    status: "ATTACHED"
+  - aggregate: "2"
+    aggregate_type: "Dynamic"
+    interface: "1/3"
+    link_status: "UP"
+    operational_status: "UP"
+    primary: "YES"
+    snmp_id: "1002"
+    status: "ATTACHED"
+  - aggregate: "2"
+    aggregate_type: "Dynamic"
+    interface: "1/4"
+    link_status: "UP"
+    operational_status: "UP"
+    primary: "NO"
+    snmp_id: "1003"
+    status: "ATTACHED"

tests/alcatel_aos/show_linkagg_port/alcatel_aos_show_linkagg_port_R8.raw

@@ -0,0 +1,5 @@
+
+Chassis/Slot/Port  Aggregate   SNMP Id   Status    Agg  Oper   Link Prim
+-------------------+----------+--------+----------+----+-----+-----+----
+         1/1/20     Dynamic      1000   ATTACHED      2  UP   UP    NO 
+         1/1/21     Dynamic      1001   ATTACHED      2  UP   UP    YES

tests/alcatel_aos/show_linkagg_port/alcatel_aos_show_linkagg_port_R8.yml

@@ -0,0 +1,18 @@
+---
+parsed_sample:
+  - aggregate: "2"
+    aggregate_type: "Dynamic"
+    interface: "1/1/20"
+    link_status: "UP"
+    operational_status: "UP"
+    primary: "NO"
+    snmp_id: "1000"
+    status: "ATTACHED"
+  - aggregate: "2"
+    aggregate_type: "Dynamic"
+    interface: "1/1/21"
+    link_status: "UP"
+    operational_status: "UP"
+    primary: "YES"
+    snmp_id: "1001"
+    status: "ATTACHED"