net: amd: Switch and case should be at the same indent

Cleaning some static warnings of indent. Signed-off-by: Guofeng Yue <[email protected]> Signed-off-by: Haoyue Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
nathanchance · Sep 16, 2022 · 78923e8 · 78923e8
1 parent 7c13f44
commit 78923e8
Show file tree

Hide file tree

Showing 3 changed files with 27 additions and 28 deletions.
diff --git a/drivers/net/ethernet/amd/amd8111e.c b/drivers/net/ethernet/amd/amd8111e.c
@@ -185,24 +185,23 @@ static void amd8111e_set_ext_phy(struct net_device *dev)
 	advert = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_ADVERTISE);
 	tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
 	switch (lp->ext_phy_option) {
-
-		default:
-		case SPEED_AUTONEG: /* advertise all values */
-			tmp |= (ADVERTISE_10HALF | ADVERTISE_10FULL |
-				ADVERTISE_100HALF | ADVERTISE_100FULL);
-			break;
-		case SPEED10_HALF:
-			tmp |= ADVERTISE_10HALF;
-			break;
-		case SPEED10_FULL:
-			tmp |= ADVERTISE_10FULL;
-			break;
-		case SPEED100_HALF:
-			tmp |= ADVERTISE_100HALF;
-			break;
-		case SPEED100_FULL:
-			tmp |= ADVERTISE_100FULL;
-			break;
+	default:
+	case SPEED_AUTONEG: /* advertise all values */
+		tmp |= (ADVERTISE_10HALF | ADVERTISE_10FULL |
+			ADVERTISE_100HALF | ADVERTISE_100FULL);
+		break;
+	case SPEED10_HALF:
+		tmp |= ADVERTISE_10HALF;
+		break;
+	case SPEED10_FULL:
+		tmp |= ADVERTISE_10FULL;
+		break;
+	case SPEED100_HALF:
+		tmp |= ADVERTISE_100HALF;
+		break;
+	case SPEED100_FULL:
+		tmp |= ADVERTISE_100FULL;
+		break;
 	}
 
 	if(advert != tmp)

diff --git a/drivers/net/ethernet/amd/atarilance.c b/drivers/net/ethernet/amd/atarilance.c
@@ -581,15 +581,15 @@ static unsigned long __init lance_probe1( struct net_device *dev,
 
 	/* Get the ethernet address */
 	switch( lp->cardtype ) {
-	  case OLD_RIEBL:
+	case OLD_RIEBL:
 		/* No ethernet address! (Set some default address) */
 		eth_hw_addr_set(dev, OldRieblDefHwaddr);
 		break;
-	  case NEW_RIEBL:
+	case NEW_RIEBL:
 		lp->memcpy_f(addr, RIEBL_HWADDR_ADDR, ETH_ALEN);
 		eth_hw_addr_set(dev, addr);
 		break;
-	  case PAM_CARD:
+	case PAM_CARD:
 		i = IO->eeprom;
 		for( i = 0; i < 6; ++i )
 			addr[i] =

diff --git a/drivers/net/ethernet/amd/nmclan_cs.c b/drivers/net/ethernet/amd/nmclan_cs.c
@@ -485,10 +485,10 @@ static int mace_read(mace_private *lp, unsigned int ioaddr, int reg)
   unsigned long flags;
 
   switch (reg >> 4) {
-    case 0: /* register 0-15 */
+  case 0: /* register 0-15 */
       data = inb(ioaddr + AM2150_MACE_BASE + reg);
       break;
-    case 1: /* register 16-31 */
+  case 1: /* register 16-31 */
       spin_lock_irqsave(&lp->bank_lock, flags);
       MACEBANK(1);
       data = inb(ioaddr + AM2150_MACE_BASE + (reg & 0x0F));
@@ -512,10 +512,10 @@ static void mace_write(mace_private *lp, unsigned int ioaddr, int reg,
   unsigned long flags;
 
   switch (reg >> 4) {
-    case 0: /* register 0-15 */
+  case 0: /* register 0-15 */
       outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + reg);
       break;
-    case 1: /* register 16-31 */
+  case 1: /* register 16-31 */
       spin_lock_irqsave(&lp->bank_lock, flags);
       MACEBANK(1);
       outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + (reg & 0x0F));
@@ -567,13 +567,13 @@ static int mace_init(mace_private *lp, unsigned int ioaddr,
    * Or just set ASEL in PHYCC below!
    */
   switch (if_port) {
-    case 1:
+  case 1:
       mace_write(lp, ioaddr, MACE_PLSCC, 0x02);
       break;
-    case 2:
+  case 2:
       mace_write(lp, ioaddr, MACE_PLSCC, 0x00);
       break;
-    default:
+  default:
       mace_write(lp, ioaddr, MACE_PHYCC, /* ASEL */ 4);
       /* ASEL Auto Select.  When set, the PORTSEL[1-0] bits are overridden,
 	 and the MACE device will automatically select the operating media