Skip to content
This repository has been archived by the owner on Apr 18, 2024. It is now read-only.

bugfix mptcp_sched.c: select lowpriosk before backupsk if bestsk is not valid #63

Closed
wants to merge 1 commit into from
Closed

bugfix mptcp_sched.c: select lowpriosk before backupsk if bestsk is not valid #63

wants to merge 1 commit into from

Conversation

chrpinedo
Copy link
Contributor

Now lowpriosk is only selected if all the subflows are lowprio subflows. This patch ensures that lowpriosk is used if there isn't a valid bestsk subflow. When there aren't valid bestsk and lowpriosk subflows, then backupsk is used.

Apart from that, ensure that sk is set to NULL if bestsk, lowpriosk and backupsk are NULL.

@chrpinedo
bugfix: select lowpriosk before backupsk if bestsk is not valid
0b8c6e4 
Apart from that, ensure that sk is set to NULL if bestsk, lowpriosk and
backupsk are NULL.
@cpaasch
Copy link
Member

cpaasch commented Dec 9, 2014

Hello,

unfortunately this change would make the scheduler select the lowpriosk even if there is still another subflow available but it's congestion window is full. E.g., if you try it out with an iperf session and limit the bandwidth on the high-priority subflow, you will see packets going over the backup-flow. This should not be the desired behavior.

I would be fine with sending over the backup-sk in case tp->pf is set to 1. That way we handle the case where there is a path-failure on the high-prio subflow.

@chrpinedo
Copy link
Contributor Author

Thanks! the congestion window point is really a key point.
So, I understand that the lowpriosk should only be used if all the subflows are low_prio ones or if all the "high_prio" subflows failed.
Then, we have the backupsk pointer. This pointer could be a low_prio or high_prio subflow depending on the for loop. However, I understand that this backupsk pointer should always be one "high_prio" subflow. What do you think?

@cpaasch
Copy link
Member

cpaasch commented Dec 9, 2014

On Dec 9, 2014, at 8:07 AM, chrpinedo [email protected] wrote:

Thanks! the congestion window point is really a key point.
So, I understand that the lowpriosk should only be used if all the subflows are low_prio ones or if all the "high_prio" subflows failed.

Indeed. At least, lowpriosk should not be used if there is still a high-prio subflow who has connectivity.

Then, we have the backupsk pointer. This pointer could be a low_prio or high_prio subflow depending on the for loop. However, I understand that this backupsk pointer should always be one "high_prio" subflow. What do you think?

I think the backupsk pointer can be either low- or high-prio. It should be used when a segment has been sent once on all subflows but still has not been acknowledged.
Btw., it looks to me that we might select the backupsk too early:
E.g., two subflows (A and B) and segment "1" has been sent on A while B's congestion window is full (mptcp_is_available returns FALSE). Then, we will set A as backupsk (because mptcp_dont_reinject_subflow returns TRUE). But B will not be chosen as an alternative because the congestion window is full. This seems a bit too agressive to me.

Could you take a look at it?

Cheers,
Christoph

@chrpinedo
Copy link
Contributor Author

I'm not an expert on kernel programming but I'm reading the code and I'm interested in the default scheduler (because I plan to code an additional scheduler heavily based on this one). So I will take a look at it the following days and If I find a solution I will propose you a patch.

Cheers,
Christian

@cpaasch
Copy link
Member

cpaasch commented Dec 9, 2014

Good. I close this pull-request and let you update your patch.

Cheers,
Christoph

@cpaasch cpaasch closed this Dec 9, 2014
dreibh pushed a commit to dreibh/mptcp that referenced this pull request May 10, 2016
@shimoday @sashalevin
usb: renesas_usbhs: avoid NULL pointer derefernce in usbhsf_pkt_handl…
250443d 
…er()

[ Upstream commit 894f2fc ]

When unexpected situation happened (e.g. tx/rx irq happened while
DMAC is used), the usbhsf_pkt_handler() was possible to cause NULL
pointer dereference like the followings:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 80000007 [#1] SMP ARM
Modules linked in: usb_f_acm u_serial g_serial libcomposite
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc6-00842-gac57066-dirty multipath-tcp#63
Hardware name: Generic R8A7790 (Flattened Device Tree)
task: c0729c00 ti: c0724000 task.ti: c0724000
PC is at 0x0
LR is at usbhsf_pkt_handler+0xac/0x118
pc : [<00000000>]    lr : [<c03257e0>]    psr: 60000193
sp : c0725db8  ip : 00000000  fp : c0725df4
r10: 00000001  r9 : 00000193  r8 : ef3ccab4
r7 : ef3cca10  r6 : eea4586c  r5 : 00000000  r4 : ef19ceb4
r3 : 00000000  r2 : 0000009c  r1 : c0725dc4  r0 : ef19ceb4

This patch adds a condition to avoid the dereference.

Fixes: e73a989 ("usb: renesas_usbhs: add DMAEngine support")
Cc: <[email protected]> # v3.1+
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
cpaasch pushed a commit that referenced this pull request Jun 15, 2016
@shimoday @sashalevin
usb: renesas_usbhs: avoid NULL pointer derefernce in usbhsf_pkt_handl…
237200d 
…er()

[ Upstream commit 894f2fc ]

When unexpected situation happened (e.g. tx/rx irq happened while
DMAC is used), the usbhsf_pkt_handler() was possible to cause NULL
pointer dereference like the followings:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 80000007 [#1] SMP ARM
Modules linked in: usb_f_acm u_serial g_serial libcomposite
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc6-00842-gac57066-dirty #63
Hardware name: Generic R8A7790 (Flattened Device Tree)
task: c0729c00 ti: c0724000 task.ti: c0724000
PC is at 0x0
LR is at usbhsf_pkt_handler+0xac/0x118
pc : [<00000000>]    lr : [<c03257e0>]    psr: 60000193
sp : c0725db8  ip : 00000000  fp : c0725df4
r10: 00000001  r9 : 00000193  r8 : ef3ccab4
r7 : ef3cca10  r6 : eea4586c  r5 : 00000000  r4 : ef19ceb4
r3 : 00000000  r2 : 0000009c  r1 : c0725dc4  r0 : ef19ceb4

This patch adds a condition to avoid the dereference.

Fixes: e73a989 ("usb: renesas_usbhs: add DMAEngine support")
Cc: <[email protected]> # v3.1+
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
cpaasch pushed a commit that referenced this pull request Feb 17, 2020
@gregkh
ipc/msg.c: consolidate all xxxctl_down() functions
078dd73 
commit 889b331 upstream.

A use of uninitialized memory in msgctl_down() because msqid64 in
ksys_msgctl hasn't been initialized.  The local | msqid64 | is created in
ksys_msgctl() and then passed into msgctl_down().  Along the way msqid64
is never initialized before msgctl_down() checks msqid64->msg_qbytes.

KUMSAN(KernelUninitializedMemorySantizer, a new error detection tool)
reports:

==================================================================
BUG: KUMSAN: use of uninitialized memory in msgctl_down+0x94/0x300
Read of size 8 at addr ffff88806bb97eb8 by task syz-executor707/2022

CPU: 0 PID: 2022 Comm: syz-executor707 Not tainted 5.2.0-rc4+ #63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
Call Trace:
 dump_stack+0x75/0xae
 __kumsan_report+0x17c/0x3e6
 kumsan_report+0xe/0x20
 msgctl_down+0x94/0x300
 ksys_msgctl.constprop.14+0xef/0x260
 do_syscall_64+0x7e/0x1f0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x4400e9
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffd869e0598 EFLAGS: 00000246 ORIG_RAX: 0000000000000047
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004400e9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00000000006ca018 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000ffffffff R11: 0000000000000246 R12: 0000000000401970
R13: 0000000000401a00 R14: 0000000000000000 R15: 0000000000000000

The buggy address belongs to the page:
page:ffffea0001aee5c0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x100000000000000()
raw: 0100000000000000 0000000000000000 ffffffff01ae0101 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kumsan: bad access detected
==================================================================

Syzkaller reproducer:
msgctl$IPC_RMID(0x0, 0x0)

C reproducer:
// autogenerated by syzkaller (https://github.com/google/syzkaller)

int main(void)
{
  syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0);
  syscall(__NR_msgctl, 0, 0, 0);
  return 0;
}

[[email protected]: adjust indentation in ksys_msgctl]
  Link: ClangBuiltLinux/linux#829
  Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Lu Shuaibing <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Suggested-by: Arnd Bergmann <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Manfred Spraul <[email protected]>
Cc: NeilBrown <[email protected]>
From: Andrew Morton <[email protected]>
Subject: ipc/msg.c: consolidate all xxxctl_down() functions

Each line here overflows 80 cols by exactly one character.  Delete one tab
per line to fix.

Cc: Shaohua Li <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
cpaasch pushed a commit that referenced this pull request Jul 9, 2020
@linusw @gregkh
ARM: 8978/1: mm: make act_mm() respect THREAD_SIZE
cceec3c 
[ Upstream commit e1de943 ]

Recent work with KASan exposed the folling hard-coded bitmask
in arch/arm/mm/proc-macros.S:

  bic     rd, sp, #8128
  bic     rd, rd, #63

This forms the bitmask 0x1FFF that is coinciding with
(PAGE_SIZE << THREAD_SIZE_ORDER) - 1, this code was assuming
that THREAD_SIZE is always 8K (8192).

As KASan was increasing THREAD_SIZE_ORDER to 2, I ran into
this bug.

Fix it by this little oneline suggested by Ard:

  bic     rd, sp, #(THREAD_SIZE - 1) & ~63

Where THREAD_SIZE is defined using THREAD_SIZE_ORDER.

We have to also include <linux/const.h> since the THREAD_SIZE
expands to use the _AC() macro.

Cc: Ard Biesheuvel <[email protected]>
Cc: Florian Fainelli <[email protected]>
Suggested-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
dreibh pushed a commit to dreibh/mptcp that referenced this pull request Feb 7, 2022
@buszk @gregkh
ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream
c8fe499 
[ Upstream commit 6ce708f54cc8d73beca213cec66ede5ce100a781 ]

Large pkt_len can lead to out-out-bound memcpy. Current
ath9k_hif_usb_rx_stream allows combining the content of two urb
inputs to one pkt. The first input can indicate the size of the
pkt. Any remaining size is saved in hif_dev->rx_remain_len.
While processing the next input, memcpy is used with rx_remain_len.

4-byte pkt_len can go up to 0xffff, while a single input is 0x4000
maximum in size (MAX_RX_BUF_SIZE). Thus, the patch adds a check for
pkt_len which must not exceed 2 * MAX_RX_BUG_SIZE.

BUG: KASAN: slab-out-of-bounds in ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
Read of size 46393 at addr ffff888018798000 by task kworker/0:1/23

CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.6.0 multipath-tcp#63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
 <IRQ>
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 __kasan_report.cold+0x37/0x7c
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 kasan_report+0xe/0x20
 check_memory_region+0x15a/0x1d0
 memcpy+0x20/0x50
 ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 ? hif_usb_mgmt_cb+0x2d9/0x2d9 [ath9k_htc]
 ? _raw_spin_lock_irqsave+0x7b/0xd0
 ? _raw_spin_trylock_bh+0x120/0x120
 ? __usb_unanchor_urb+0x12f/0x210
 __usb_hcd_giveback_urb+0x1e4/0x380
 usb_giveback_urb_bh+0x241/0x4f0
 ? __hrtimer_run_queues+0x316/0x740
 ? __usb_hcd_giveback_urb+0x380/0x380
 tasklet_action_common.isra.0+0x135/0x330
 __do_softirq+0x18c/0x634
 irq_exit+0x114/0x140
 smp_apic_timer_interrupt+0xde/0x380
 apic_timer_interrupt+0xf/0x20

I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.

After fixing the value of pkt_tag to ATH_USB_RX_STREAM_MODE_TAG in QEMU
emulation, I found the KASAN report. The bug is triggerable whenever
pkt_len is above two MAX_RX_BUG_SIZE. I used the same input that crashes
to test the driver works when applying the patch.

Signed-off-by: Zekun Shen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
dreibh pushed a commit to dreibh/mptcp that referenced this pull request Feb 7, 2022
@buszk @gregkh
ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream
8fcc23d 
[ Upstream commit 6ce708f54cc8d73beca213cec66ede5ce100a781 ]

Large pkt_len can lead to out-out-bound memcpy. Current
ath9k_hif_usb_rx_stream allows combining the content of two urb
inputs to one pkt. The first input can indicate the size of the
pkt. Any remaining size is saved in hif_dev->rx_remain_len.
While processing the next input, memcpy is used with rx_remain_len.

4-byte pkt_len can go up to 0xffff, while a single input is 0x4000
maximum in size (MAX_RX_BUF_SIZE). Thus, the patch adds a check for
pkt_len which must not exceed 2 * MAX_RX_BUG_SIZE.

BUG: KASAN: slab-out-of-bounds in ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
Read of size 46393 at addr ffff888018798000 by task kworker/0:1/23

CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.6.0 multipath-tcp#63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
 <IRQ>
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 __kasan_report.cold+0x37/0x7c
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 kasan_report+0xe/0x20
 check_memory_region+0x15a/0x1d0
 memcpy+0x20/0x50
 ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 ? hif_usb_mgmt_cb+0x2d9/0x2d9 [ath9k_htc]
 ? _raw_spin_lock_irqsave+0x7b/0xd0
 ? _raw_spin_trylock_bh+0x120/0x120
 ? __usb_unanchor_urb+0x12f/0x210
 __usb_hcd_giveback_urb+0x1e4/0x380
 usb_giveback_urb_bh+0x241/0x4f0
 ? __hrtimer_run_queues+0x316/0x740
 ? __usb_hcd_giveback_urb+0x380/0x380
 tasklet_action_common.isra.0+0x135/0x330
 __do_softirq+0x18c/0x634
 irq_exit+0x114/0x140
 smp_apic_timer_interrupt+0xde/0x380
 apic_timer_interrupt+0xf/0x20

I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.

After fixing the value of pkt_tag to ATH_USB_RX_STREAM_MODE_TAG in QEMU
emulation, I found the KASAN report. The bug is triggerable whenever
pkt_len is above two MAX_RX_BUG_SIZE. I used the same input that crashes
to test the driver works when applying the patch.

Signed-off-by: Zekun Shen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
matttbe pushed a commit that referenced this pull request Feb 10, 2022
@buszk @gregkh
ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream
1d153d8 
[ Upstream commit 6ce708f54cc8d73beca213cec66ede5ce100a781 ]

Large pkt_len can lead to out-out-bound memcpy. Current
ath9k_hif_usb_rx_stream allows combining the content of two urb
inputs to one pkt. The first input can indicate the size of the
pkt. Any remaining size is saved in hif_dev->rx_remain_len.
While processing the next input, memcpy is used with rx_remain_len.

4-byte pkt_len can go up to 0xffff, while a single input is 0x4000
maximum in size (MAX_RX_BUF_SIZE). Thus, the patch adds a check for
pkt_len which must not exceed 2 * MAX_RX_BUG_SIZE.

BUG: KASAN: slab-out-of-bounds in ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
Read of size 46393 at addr ffff888018798000 by task kworker/0:1/23

CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.6.0 #63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
 <IRQ>
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 __kasan_report.cold+0x37/0x7c
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 kasan_report+0xe/0x20
 check_memory_region+0x15a/0x1d0
 memcpy+0x20/0x50
 ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 ? hif_usb_mgmt_cb+0x2d9/0x2d9 [ath9k_htc]
 ? _raw_spin_lock_irqsave+0x7b/0xd0
 ? _raw_spin_trylock_bh+0x120/0x120
 ? __usb_unanchor_urb+0x12f/0x210
 __usb_hcd_giveback_urb+0x1e4/0x380
 usb_giveback_urb_bh+0x241/0x4f0
 ? __hrtimer_run_queues+0x316/0x740
 ? __usb_hcd_giveback_urb+0x380/0x380
 tasklet_action_common.isra.0+0x135/0x330
 __do_softirq+0x18c/0x634
 irq_exit+0x114/0x140
 smp_apic_timer_interrupt+0xde/0x380
 apic_timer_interrupt+0xf/0x20

I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.

After fixing the value of pkt_tag to ATH_USB_RX_STREAM_MODE_TAG in QEMU
emulation, I found the KASAN report. The bug is triggerable whenever
pkt_len is above two MAX_RX_BUG_SIZE. I used the same input that crashes
to test the driver works when applying the patch.

Signed-off-by: Zekun Shen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
matttbe pushed a commit that referenced this pull request Dec 9, 2022
@computersforpeace @gregkh
firmware: coreboot: Register bus in module init
7d08b4e 
[ Upstream commit 65946690ed8d972fdb91a74ee75ac0f0f0d68321 ]

The coreboot_table driver registers a coreboot bus while probing a
"coreboot_table" device representing the coreboot table memory region.
Probing this device (i.e., registering the bus) is a dependency for the
module_init() functions of any driver for this bus (e.g.,
memconsole-coreboot.c / memconsole_driver_init()).

With synchronous probe, this dependency works OK, as the link order in
the Makefile ensures coreboot_table_driver_init() (and thus,
coreboot_table_probe()) completes before a coreboot device driver tries
to add itself to the bus.

With asynchronous probe, however, coreboot_table_probe() may race with
memconsole_driver_init(), and so we're liable to hit one of these two:

1. coreboot_driver_register() eventually hits "[...] the bus was not
   initialized.", and the memconsole driver fails to register; or
2. coreboot_driver_register() gets past #1, but still races with
   bus_register() and hits some other undefined/crashing behavior (e.g.,
   in driver_find() [1])

We can resolve this by registering the bus in our initcall, and only
deferring "device" work (scanning the coreboot memory region and
creating sub-devices) to probe().

[1] Example failure, using 'driver_async_probe=*' kernel command line:

[    0.114217] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
...
[    0.114307] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc1 #63
[    0.114316] Hardware name: Google Scarlet (DT)
...
[    0.114488] Call trace:
[    0.114494]  _raw_spin_lock+0x34/0x60
[    0.114502]  kset_find_obj+0x28/0x84
[    0.114511]  driver_find+0x30/0x50
[    0.114520]  driver_register+0x64/0x10c
[    0.114528]  coreboot_driver_register+0x30/0x3c
[    0.114540]  memconsole_driver_init+0x24/0x30
[    0.114550]  do_one_initcall+0x154/0x2e0
[    0.114560]  do_initcall_level+0x134/0x160
[    0.114571]  do_initcalls+0x60/0xa0
[    0.114579]  do_basic_setup+0x28/0x34
[    0.114588]  kernel_init_freeable+0xf8/0x150
[    0.114596]  kernel_init+0x2c/0x12c
[    0.114607]  ret_from_fork+0x10/0x20
[    0.114624] Code: 5280002b 1100054a b900092a f9800011 (885ffc01)
[    0.114631] ---[ end trace 0000000000000000 ]---

Fixes: b81e314 ("firmware: coreboot: Make bus registration symmetric")
Cc: <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/20221019180934.1.If29e167d8a4771b0bf4a39c89c6946ed764817b9@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Sign up for free to subscribe to this conversation on GitHub. Already have an account? Sign in.
Reviewers
No reviews
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.
2 participants
@chrpinedo @cpaasch