This repository has been archived by the owner on Apr 18, 2024. It is now read-only.
mptcp patch for ubuntu #89
Comments
|
what do you mean by "patch" ? The source can be compiled on ubuntu using the usual kernel compile settings. |
cpaasch
pushed a commit
that referenced
this issue
Feb 28, 2018
When aacraid init fails with "AAC0: adapter self-test failed.", shutdown leads to UBSAN warning and then oops: [154316.118423] ================================================================================ [154316.118508] UBSAN: Undefined behaviour in drivers/scsi/scsi_lib.c:2328:27 [154316.118566] member access within null pointer of type 'struct Scsi_Host' [154316.118631] CPU: 2 PID: 14530 Comm: reboot Tainted: G W 4.15.0-dirty #89 [154316.118701] Hardware name: Hewlett Packard HP NetServer/HP System Board, BIOS 4.06.46 PW 06/25/2003 [154316.118774] Call Trace: [154316.118848] dump_stack+0x48/0x65 [154316.118916] ubsan_epilogue+0xe/0x40 [154316.118976] __ubsan_handle_type_mismatch+0xfb/0x180 [154316.119043] scsi_block_requests+0x20/0x30 [154316.119135] aac_shutdown+0x18/0x40 [aacraid] [154316.119196] pci_device_shutdown+0x33/0x50 [154316.119269] device_shutdown+0x18a/0x390 [...] [154316.123435] BUG: unable to handle kernel NULL pointer dereference at 000000f4 [154316.123515] IP: scsi_block_requests+0xa/0x30 This is because aac_shutdown() does struct Scsi_Host *shost = pci_get_drvdata(dev); scsi_block_requests(shost); and that assumes shost has been assigned with pci_set_drvdata(). However, pci_set_drvdata(pdev, shost) is done in aac_probe_one() far after bailing out with error from calling the init function ((*aac_drivers[index].init)(aac)), and when the init function fails, no error is returned from aac_probe_one() so PCI layer assumes there is driver attached, and tries to shut it down later. Fix it by returning error from aac_probe_one() when card-specific init function fails. This fixes reboot on my HP NetRAID-4M with dead battery. Signed-off-by: Meelis Roos <[email protected]> Reviewed-by: Dave Carroll <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
dreibh
pushed a commit
to dreibh/mptcp
that referenced
this issue
Jun 21, 2018
[ Upstream commit 0dfc0c7 ] It allows to flush more than 4GB of device TLBs. So the mask should be 64bit wide. UBSAN captured this fault as below. [ 3.760024] ================================================================================ [ 3.768440] UBSAN: Undefined behaviour in drivers/iommu/dmar.c:1348:3 [ 3.774864] shift exponent 64 is too large for 32-bit type 'int' [ 3.780853] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G U 4.17.0-rc1+ multipath-tcp#89 [ 3.788661] Hardware name: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.2.8 01/26/2016 [ 3.796034] Call Trace: [ 3.798472] <IRQ> [ 3.800479] dump_stack+0x90/0xfb [ 3.803787] ubsan_epilogue+0x9/0x40 [ 3.807353] __ubsan_handle_shift_out_of_bounds+0x10e/0x170 [ 3.812916] ? qi_flush_dev_iotlb+0x124/0x180 [ 3.817261] qi_flush_dev_iotlb+0x124/0x180 [ 3.821437] iommu_flush_dev_iotlb+0x94/0xf0 [ 3.825698] iommu_flush_iova+0x10b/0x1c0 [ 3.829699] ? fq_ring_free+0x1d0/0x1d0 [ 3.833527] iova_domain_flush+0x25/0x40 [ 3.837448] fq_flush_timeout+0x55/0x160 [ 3.841368] ? fq_ring_free+0x1d0/0x1d0 [ 3.845200] ? fq_ring_free+0x1d0/0x1d0 [ 3.849034] call_timer_fn+0xbe/0x310 [ 3.852696] ? fq_ring_free+0x1d0/0x1d0 [ 3.856530] run_timer_softirq+0x223/0x6e0 [ 3.860625] ? sched_clock+0x5/0x10 [ 3.864108] ? sched_clock+0x5/0x10 [ 3.867594] __do_softirq+0x1b5/0x6f5 [ 3.871250] irq_exit+0xd4/0x130 [ 3.874470] smp_apic_timer_interrupt+0xb8/0x2f0 [ 3.879075] apic_timer_interrupt+0xf/0x20 [ 3.883159] </IRQ> [ 3.885255] RIP: 0010:poll_idle+0x60/0xe7 [ 3.889252] RSP: 0018:ffffb1b201943e30 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 [ 3.896802] RAX: 0000000080200000 RBX: 000000000000008e RCX: 000000000000001f [ 3.903918] RDX: 0000000000000000 RSI: 000000002819aa06 RDI: 0000000000000000 [ 3.911031] RBP: ffff9e93c6b33280 R08: 00000010f717d567 R09: 000000000010d205 [ 3.918146] R10: ffffb1b201943df8 R11: 0000000000000001 R12: 00000000e01b169d [ 3.925260] R13: 0000000000000000 R14: ffffffffb12aa400 R15: 0000000000000000 [ 3.932382] cpuidle_enter_state+0xb4/0x470 [ 3.936558] do_idle+0x222/0x310 [ 3.939779] cpu_startup_entry+0x78/0x90 [ 3.943693] start_secondary+0x205/0x2e0 [ 3.947607] secondary_startup_64+0xa5/0xb0 [ 3.951783] ================================================================================ Signed-off-by: Changbin Du <[email protected]> Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
cpaasch
pushed a commit
that referenced
this issue
May 23, 2019
[ Upstream commit 6c0afef ] syzbot was able to catch a use-after-free read in pid_nr_ns() [1] ip6fl_seq_show() seems to use RCU protection, dereferencing fl->owner.pid but fl_free() releases fl->owner.pid before rcu grace period is started. [1] BUG: KASAN: use-after-free in pid_nr_ns+0x128/0x140 kernel/pid.c:407 Read of size 4 at addr ffff888094012a04 by task syz-executor.0/18087 CPU: 0 PID: 18087 Comm: syz-executor.0 Not tainted 5.1.0-rc6+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131 pid_nr_ns+0x128/0x140 kernel/pid.c:407 ip6fl_seq_show+0x2f8/0x4f0 net/ipv6/ip6_flowlabel.c:794 seq_read+0xad3/0x1130 fs/seq_file.c:268 proc_reg_read+0x1fe/0x2c0 fs/proc/inode.c:227 do_loop_readv_writev fs/read_write.c:701 [inline] do_loop_readv_writev fs/read_write.c:688 [inline] do_iter_read+0x4a9/0x660 fs/read_write.c:922 vfs_readv+0xf0/0x160 fs/read_write.c:984 kernel_readv fs/splice.c:358 [inline] default_file_splice_read+0x475/0x890 fs/splice.c:413 do_splice_to+0x12a/0x190 fs/splice.c:876 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:953 do_splice_direct+0x1da/0x2a0 fs/splice.c:1062 do_sendfile+0x597/0xd00 fs/read_write.c:1443 __do_sys_sendfile64 fs/read_write.c:1498 [inline] __se_sys_sendfile64 fs/read_write.c:1490 [inline] __x64_sys_sendfile64+0x15a/0x220 fs/read_write.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458da9 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f300d24bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000458da9 RDX: 00000000200000c0 RSI: 0000000000000008 RDI: 0000000000000007 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000005a R11: 0000000000000246 R12: 00007f300d24c6d4 R13: 00000000004c5fa3 R14: 00000000004da748 R15: 00000000ffffffff Allocated by task 17543: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_kmalloc mm/kasan/common.c:497 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505 slab_post_alloc_hook mm/slab.h:437 [inline] slab_alloc mm/slab.c:3393 [inline] kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555 alloc_pid+0x55/0x8f0 kernel/pid.c:168 copy_process.part.0+0x3b08/0x7980 kernel/fork.c:1932 copy_process kernel/fork.c:1709 [inline] _do_fork+0x257/0xfd0 kernel/fork.c:2226 __do_sys_clone kernel/fork.c:2333 [inline] __se_sys_clone kernel/fork.c:2327 [inline] __x64_sys_clone+0xbf/0x150 kernel/fork.c:2327 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7789: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:459 kasan_slab_free+0xe/0x10 mm/kasan/common.c:467 __cache_free mm/slab.c:3499 [inline] kmem_cache_free+0x86/0x260 mm/slab.c:3765 put_pid.part.0+0x111/0x150 kernel/pid.c:111 put_pid+0x20/0x30 kernel/pid.c:105 fl_free+0xbe/0xe0 net/ipv6/ip6_flowlabel.c:102 ip6_fl_gc+0x295/0x3e0 net/ipv6/ip6_flowlabel.c:152 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 The buggy address belongs to the object at ffff888094012a00 which belongs to the cache pid_2 of size 88 The buggy address is located 4 bytes inside of 88-byte region [ffff888094012a00, ffff888094012a58) The buggy address belongs to the page: page:ffffea0002500480 count:1 mapcount:0 mapping:ffff88809a483080 index:0xffff888094012980 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea00018a3508 ffffea0002524a88 ffff88809a483080 raw: ffff888094012980 ffff888094012000 000000010000001b 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888094012900: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012980: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc >ffff888094012a00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ^ ffff888094012a80: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012b00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc Fixes: 4f82f45 ("net ip6 flowlabel: Make owner a union of struct pid * and kuid_t") Signed-off-by: Eric Dumazet <[email protected]> Cc: Eric W. Biederman <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
cpaasch
pushed a commit
that referenced
this issue
May 23, 2019
[ Upstream commit 6c0afef ] syzbot was able to catch a use-after-free read in pid_nr_ns() [1] ip6fl_seq_show() seems to use RCU protection, dereferencing fl->owner.pid but fl_free() releases fl->owner.pid before rcu grace period is started. [1] BUG: KASAN: use-after-free in pid_nr_ns+0x128/0x140 kernel/pid.c:407 Read of size 4 at addr ffff888094012a04 by task syz-executor.0/18087 CPU: 0 PID: 18087 Comm: syz-executor.0 Not tainted 5.1.0-rc6+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131 pid_nr_ns+0x128/0x140 kernel/pid.c:407 ip6fl_seq_show+0x2f8/0x4f0 net/ipv6/ip6_flowlabel.c:794 seq_read+0xad3/0x1130 fs/seq_file.c:268 proc_reg_read+0x1fe/0x2c0 fs/proc/inode.c:227 do_loop_readv_writev fs/read_write.c:701 [inline] do_loop_readv_writev fs/read_write.c:688 [inline] do_iter_read+0x4a9/0x660 fs/read_write.c:922 vfs_readv+0xf0/0x160 fs/read_write.c:984 kernel_readv fs/splice.c:358 [inline] default_file_splice_read+0x475/0x890 fs/splice.c:413 do_splice_to+0x12a/0x190 fs/splice.c:876 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:953 do_splice_direct+0x1da/0x2a0 fs/splice.c:1062 do_sendfile+0x597/0xd00 fs/read_write.c:1443 __do_sys_sendfile64 fs/read_write.c:1498 [inline] __se_sys_sendfile64 fs/read_write.c:1490 [inline] __x64_sys_sendfile64+0x15a/0x220 fs/read_write.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458da9 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f300d24bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000458da9 RDX: 00000000200000c0 RSI: 0000000000000008 RDI: 0000000000000007 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000005a R11: 0000000000000246 R12: 00007f300d24c6d4 R13: 00000000004c5fa3 R14: 00000000004da748 R15: 00000000ffffffff Allocated by task 17543: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_kmalloc mm/kasan/common.c:497 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505 slab_post_alloc_hook mm/slab.h:437 [inline] slab_alloc mm/slab.c:3393 [inline] kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555 alloc_pid+0x55/0x8f0 kernel/pid.c:168 copy_process.part.0+0x3b08/0x7980 kernel/fork.c:1932 copy_process kernel/fork.c:1709 [inline] _do_fork+0x257/0xfd0 kernel/fork.c:2226 __do_sys_clone kernel/fork.c:2333 [inline] __se_sys_clone kernel/fork.c:2327 [inline] __x64_sys_clone+0xbf/0x150 kernel/fork.c:2327 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7789: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:459 kasan_slab_free+0xe/0x10 mm/kasan/common.c:467 __cache_free mm/slab.c:3499 [inline] kmem_cache_free+0x86/0x260 mm/slab.c:3765 put_pid.part.0+0x111/0x150 kernel/pid.c:111 put_pid+0x20/0x30 kernel/pid.c:105 fl_free+0xbe/0xe0 net/ipv6/ip6_flowlabel.c:102 ip6_fl_gc+0x295/0x3e0 net/ipv6/ip6_flowlabel.c:152 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 The buggy address belongs to the object at ffff888094012a00 which belongs to the cache pid_2 of size 88 The buggy address is located 4 bytes inside of 88-byte region [ffff888094012a00, ffff888094012a58) The buggy address belongs to the page: page:ffffea0002500480 count:1 mapcount:0 mapping:ffff88809a483080 index:0xffff888094012980 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea00018a3508 ffffea0002524a88 ffff88809a483080 raw: ffff888094012980 ffff888094012000 000000010000001b 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888094012900: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012980: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc >ffff888094012a00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ^ ffff888094012a80: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012b00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc Fixes: 4f82f45 ("net ip6 flowlabel: Make owner a union of struct pid * and kuid_t") Signed-off-by: Eric Dumazet <[email protected]> Cc: Eric W. Biederman <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
cpaasch
pushed a commit
that referenced
this issue
Oct 28, 2019
commit fe9bc16 upstream. Nullify the resource task struct pointer to ensure that subsequent calls won't try to release task_struct again. ------------[ cut here ]------------ ODEBUG: free active (active state 1) object type: rcu_head hint: (null) WARNING: CPU: 0 PID: 6048 at lib/debugobjects.c:329 debug_print_object+0x16a/0x210 lib/debugobjects.c:326 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 6048 Comm: syz-executor022 Not tainted 4.19.0-rc7-next-20181008+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x3ab lib/dump_stack.c:113 panic+0x238/0x4e7 kernel/panic.c:184 __warn.cold.8+0x163/0x1ba kernel/panic.c:536 report_bug+0x254/0x2d0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x36/0x40 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:969 RIP: 0010:debug_print_object+0x16a/0x210 lib/debugobjects.c:326 Code: 41 88 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 92 00 00 00 48 8b 14 dd 60 02 41 88 4c 89 fe 48 c7 c7 00 f8 40 88 e8 36 2f b4 fd <0f> 0b 83 05 a9 f4 5e 06 01 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 5f RSP: 0018:ffff8801d8c3eda8 EFLAGS: 00010086 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8164d235 RDI: 0000000000000005 RBP: ffff8801d8c3ede8 R08: ffff8801d70aa280 R09: ffffed003b5c3eda R10: ffffed003b5c3eda R11: ffff8801dae1f6d7 R12: 0000000000000001 R13: ffffffff8939a760 R14: 0000000000000000 R15: ffffffff8840fca0 __debug_check_no_obj_freed lib/debugobjects.c:786 [inline] debug_check_no_obj_freed+0x3ae/0x58d lib/debugobjects.c:818 kmem_cache_free+0x202/0x290 mm/slab.c:3759 free_task_struct kernel/fork.c:163 [inline] free_task+0x16e/0x1f0 kernel/fork.c:457 __put_task_struct+0x2e6/0x620 kernel/fork.c:730 put_task_struct include/linux/sched/task.h:96 [inline] finish_task_switch+0x66c/0x900 kernel/sched/core.c:2715 context_switch kernel/sched/core.c:2834 [inline] __schedule+0x8d7/0x21d0 kernel/sched/core.c:3480 schedule+0xfe/0x460 kernel/sched/core.c:3524 freezable_schedule include/linux/freezer.h:172 [inline] futex_wait_queue_me+0x3f9/0x840 kernel/futex.c:2530 futex_wait+0x45c/0xa50 kernel/futex.c:2645 do_futex+0x31a/0x26d0 kernel/futex.c:3528 __do_sys_futex kernel/futex.c:3589 [inline] __se_sys_futex kernel/futex.c:3557 [inline] __x64_sys_futex+0x472/0x6a0 kernel/futex.c:3557 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x446549 Code: e8 2c b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f3a998f5da8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: ffffffffffffffda RBX: 00000000006dbc38 RCX: 0000000000446549 RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00000000006dbc38 RBP: 00000000006dbc30 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dbc3c R13: 2f646e6162696e69 R14: 666e692f7665642f R15: 00000000006dbd2c Kernel Offset: disabled Reported-by: [email protected] Fixes: ed7a01f ("RDMA/restrack: Release task struct which was hold by CM_ID object") Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Cc: Pavel Machek <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
dreibh
pushed a commit
to dreibh/mptcp
that referenced
this issue
Mar 26, 2021
commit dbcc7d5 upstream. While resolving backreferences, as part of a logical ino ioctl call or fiemap, we can end up hitting a BUG_ON() when replaying tree mod log operations of a root, triggering a stack trace like the following: ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:1210! invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 19054 Comm: crawl_335 Tainted: G W 5.11.0-2d11c0084b02-misc-next+ multipath-tcp#89 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:__tree_mod_log_rewind+0x3b1/0x3c0 Code: 05 48 8d 74 10 (...) RSP: 0018:ffffc90001eb70b8 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff88812344e400 RCX: ffffffffb28933b6 RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff88812344e42c RBP: ffffc90001eb7108 R08: 1ffff11020b60a20 R09: ffffed1020b60a20 R10: ffff888105b050f9 R11: ffffed1020b60a1f R12: 00000000000000ee R13: ffff8880195520c0 R14: ffff8881bc958500 R15: ffff88812344e42c FS: 00007fd1955e8700(0000) GS:ffff8881f5600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efdb7928718 CR3: 000000010103a006 CR4: 0000000000170ee0 Call Trace: btrfs_search_old_slot+0x265/0x10d0 ? lock_acquired+0xbb/0x600 ? btrfs_search_slot+0x1090/0x1090 ? free_extent_buffer.part.61+0xd7/0x140 ? free_extent_buffer+0x13/0x20 resolve_indirect_refs+0x3e9/0xfc0 ? lock_downgrade+0x3d0/0x3d0 ? __kasan_check_read+0x11/0x20 ? add_prelim_ref.part.11+0x150/0x150 ? lock_downgrade+0x3d0/0x3d0 ? __kasan_check_read+0x11/0x20 ? lock_acquired+0xbb/0x600 ? __kasan_check_write+0x14/0x20 ? do_raw_spin_unlock+0xa8/0x140 ? rb_insert_color+0x30/0x360 ? prelim_ref_insert+0x12d/0x430 find_parent_nodes+0x5c3/0x1830 ? resolve_indirect_refs+0xfc0/0xfc0 ? lock_release+0xc8/0x620 ? fs_reclaim_acquire+0x67/0xf0 ? lock_acquire+0xc7/0x510 ? lock_downgrade+0x3d0/0x3d0 ? lockdep_hardirqs_on_prepare+0x160/0x210 ? lock_release+0xc8/0x620 ? fs_reclaim_acquire+0x67/0xf0 ? lock_acquire+0xc7/0x510 ? poison_range+0x38/0x40 ? unpoison_range+0x14/0x40 ? trace_hardirqs_on+0x55/0x120 btrfs_find_all_roots_safe+0x142/0x1e0 ? find_parent_nodes+0x1830/0x1830 ? btrfs_inode_flags_to_xflags+0x50/0x50 iterate_extent_inodes+0x20e/0x580 ? tree_backref_for_extent+0x230/0x230 ? lock_downgrade+0x3d0/0x3d0 ? read_extent_buffer+0xdd/0x110 ? lock_downgrade+0x3d0/0x3d0 ? __kasan_check_read+0x11/0x20 ? lock_acquired+0xbb/0x600 ? __kasan_check_write+0x14/0x20 ? _raw_spin_unlock+0x22/0x30 ? __kasan_check_write+0x14/0x20 iterate_inodes_from_logical+0x129/0x170 ? iterate_inodes_from_logical+0x129/0x170 ? btrfs_inode_flags_to_xflags+0x50/0x50 ? iterate_extent_inodes+0x580/0x580 ? __vmalloc_node+0x92/0xb0 ? init_data_container+0x34/0xb0 ? init_data_container+0x34/0xb0 ? kvmalloc_node+0x60/0x80 btrfs_ioctl_logical_to_ino+0x158/0x230 btrfs_ioctl+0x205e/0x4040 ? __might_sleep+0x71/0xe0 ? btrfs_ioctl_get_supported_features+0x30/0x30 ? getrusage+0x4b6/0x9c0 ? __kasan_check_read+0x11/0x20 ? lock_release+0xc8/0x620 ? __might_fault+0x64/0xd0 ? lock_acquire+0xc7/0x510 ? lock_downgrade+0x3d0/0x3d0 ? lockdep_hardirqs_on_prepare+0x210/0x210 ? lockdep_hardirqs_on_prepare+0x210/0x210 ? __kasan_check_read+0x11/0x20 ? do_vfs_ioctl+0xfc/0x9d0 ? ioctl_file_clone+0xe0/0xe0 ? lock_downgrade+0x3d0/0x3d0 ? lockdep_hardirqs_on_prepare+0x210/0x210 ? __kasan_check_read+0x11/0x20 ? lock_release+0xc8/0x620 ? __task_pid_nr_ns+0xd3/0x250 ? lock_acquire+0xc7/0x510 ? __fget_files+0x160/0x230 ? __fget_light+0xf2/0x110 __x64_sys_ioctl+0xc3/0x100 do_syscall_64+0x37/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fd1976e2427 Code: 00 00 90 48 8b 05 (...) RSP: 002b:00007fd1955e5cf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fd1955e5f40 RCX: 00007fd1976e2427 RDX: 00007fd1955e5f48 RSI: 00000000c038943b RDI: 0000000000000004 RBP: 0000000001000000 R08: 0000000000000000 R09: 00007fd1955e6120 R10: 0000557835366b00 R11: 0000000000000246 R12: 0000000000000004 R13: 00007fd1955e5f48 R14: 00007fd1955e5f40 R15: 00007fd1955e5ef8 Modules linked in: ---[ end trace ec8931a1c36e57be ]--- (gdb) l *(__tree_mod_log_rewind+0x3b1) 0xffffffff81893521 is in __tree_mod_log_rewind (fs/btrfs/ctree.c:1210). 1205 * the modification. as we're going backwards, we do the 1206 * opposite of each operation here. 1207 */ 1208 switch (tm->op) { 1209 case MOD_LOG_KEY_REMOVE_WHILE_FREEING: 1210 BUG_ON(tm->slot < n); 1211 fallthrough; 1212 case MOD_LOG_KEY_REMOVE_WHILE_MOVING: 1213 case MOD_LOG_KEY_REMOVE: 1214 btrfs_set_node_key(eb, &tm->key, tm->slot); Here's what happens to hit that BUG_ON(): 1) We have one tree mod log user (through fiemap or the logical ino ioctl), with a sequence number of 1, so we have fs_info->tree_mod_seq == 1; 2) Another task is at ctree.c:balance_level() and we have eb X currently as the root of the tree, and we promote its single child, eb Y, as the new root. Then, at ctree.c:balance_level(), we call: tree_mod_log_insert_root(eb X, eb Y, 1); 3) At tree_mod_log_insert_root() we create tree mod log elements for each slot of eb X, of operation type MOD_LOG_KEY_REMOVE_WHILE_FREEING each with a ->logical pointing to ebX->start. These are placed in an array named tm_list. Lets assume there are N elements (N pointers in eb X); 4) Then, still at tree_mod_log_insert_root(), we create a tree mod log element of operation type MOD_LOG_ROOT_REPLACE, ->logical set to ebY->start, ->old_root.logical set to ebX->start, ->old_root.level set to the level of eb X and ->generation set to the generation of eb X; 5) Then tree_mod_log_insert_root() calls tree_mod_log_free_eb() with tm_list as argument. After that, tree_mod_log_free_eb() calls __tree_mod_log_insert() for each member of tm_list in reverse order, from highest slot in eb X, slot N - 1, to slot 0 of eb X; 6) __tree_mod_log_insert() sets the sequence number of each given tree mod log operation - it increments fs_info->tree_mod_seq and sets fs_info->tree_mod_seq as the sequence number of the given tree mod log operation. This means that for the tm_list created at tree_mod_log_insert_root(), the element corresponding to slot 0 of eb X has the highest sequence number (1 + N), and the element corresponding to the last slot has the lowest sequence number (2); 7) Then, after inserting tm_list's elements into the tree mod log rbtree, the MOD_LOG_ROOT_REPLACE element is inserted, which gets the highest sequence number, which is N + 2; 8) Back to ctree.c:balance_level(), we free eb X by calling btrfs_free_tree_block() on it. Because eb X was created in the current transaction, has no other references and writeback did not happen for it, we add it back to the free space cache/tree; 9) Later some other task T allocates the metadata extent from eb X, since it is marked as free space in the space cache/tree, and uses it as a node for some other btree; 10) The tree mod log user task calls btrfs_search_old_slot(), which calls get_old_root(), and finally that calls __tree_mod_log_oldest_root() with time_seq == 1 and eb_root == eb Y; 11) First iteration of the while loop finds the tree mod log element with sequence number N + 2, for the logical address of eb Y and of type MOD_LOG_ROOT_REPLACE; 12) Because the operation type is MOD_LOG_ROOT_REPLACE, we don't break out of the loop, and set root_logical to point to tm->old_root.logical which corresponds to the logical address of eb X; 13) On the next iteration of the while loop, the call to tree_mod_log_search_oldest() returns the smallest tree mod log element for the logical address of eb X, which has a sequence number of 2, an operation type of MOD_LOG_KEY_REMOVE_WHILE_FREEING and corresponds to the old slot N - 1 of eb X (eb X had N items in it before being freed); 14) We then break out of the while loop and return the tree mod log operation of type MOD_LOG_ROOT_REPLACE (eb Y), and not the one for slot N - 1 of eb X, to get_old_root(); 15) At get_old_root(), we process the MOD_LOG_ROOT_REPLACE operation and set "logical" to the logical address of eb X, which was the old root. We then call tree_mod_log_search() passing it the logical address of eb X and time_seq == 1; 16) Then before calling tree_mod_log_search(), task T adds a key to eb X, which results in adding a tree mod log operation of type MOD_LOG_KEY_ADD to the tree mod log - this is done at ctree.c:insert_ptr() - but after adding the tree mod log operation and before updating the number of items in eb X from 0 to 1... 17) The task at get_old_root() calls tree_mod_log_search() and gets the tree mod log operation of type MOD_LOG_KEY_ADD just added by task T. Then it enters the following if branch: if (old_root && tm && tm->op != MOD_LOG_KEY_REMOVE_WHILE_FREEING) { (...) } (...) Calls read_tree_block() for eb X, which gets a reference on eb X but does not lock it - task T has it locked. Then it clones eb X while it has nritems set to 0 in its header, before task T sets nritems to 1 in eb X's header. From hereupon we use the clone of eb X which no other task has access to; 18) Then we call __tree_mod_log_rewind(), passing it the MOD_LOG_KEY_ADD mod log operation we just got from tree_mod_log_search() in the previous step and the cloned version of eb X; 19) At __tree_mod_log_rewind(), we set the local variable "n" to the number of items set in eb X's clone, which is 0. Then we enter the while loop, and in its first iteration we process the MOD_LOG_KEY_ADD operation, which just decrements "n" from 0 to (u32)-1, since "n" is declared with a type of u32. At the end of this iteration we call rb_next() to find the next tree mod log operation for eb X, that gives us the mod log operation of type MOD_LOG_KEY_REMOVE_WHILE_FREEING, for slot 0, with a sequence number of N + 1 (steps 3 to 6); 20) Then we go back to the top of the while loop and trigger the following BUG_ON(): (...) switch (tm->op) { case MOD_LOG_KEY_REMOVE_WHILE_FREEING: BUG_ON(tm->slot < n); fallthrough; (...) Because "n" has a value of (u32)-1 (4294967295) and tm->slot is 0. Fix this by taking a read lock on the extent buffer before cloning it at ctree.c:get_old_root(). This should be done regardless of the extent buffer having been freed and reused, as a concurrent task might be modifying it (while holding a write lock on it). Reported-by: Zygo Blaxell <[email protected]> Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Fixes: 834328a ("Btrfs: tree mod log's old roots could still be part of the tree") CC: [email protected] # 4.4+ Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
matttbe
pushed a commit
that referenced
this issue
Apr 1, 2021
commit dbcc7d5 upstream. While resolving backreferences, as part of a logical ino ioctl call or fiemap, we can end up hitting a BUG_ON() when replaying tree mod log operations of a root, triggering a stack trace like the following: ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:1210! invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 19054 Comm: crawl_335 Tainted: G W 5.11.0-2d11c0084b02-misc-next+ #89 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:__tree_mod_log_rewind+0x3b1/0x3c0 Code: 05 48 8d 74 10 (...) RSP: 0018:ffffc90001eb70b8 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff88812344e400 RCX: ffffffffb28933b6 RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff88812344e42c RBP: ffffc90001eb7108 R08: 1ffff11020b60a20 R09: ffffed1020b60a20 R10: ffff888105b050f9 R11: ffffed1020b60a1f R12: 00000000000000ee R13: ffff8880195520c0 R14: ffff8881bc958500 R15: ffff88812344e42c FS: 00007fd1955e8700(0000) GS:ffff8881f5600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efdb7928718 CR3: 000000010103a006 CR4: 0000000000170ee0 Call Trace: btrfs_search_old_slot+0x265/0x10d0 ? lock_acquired+0xbb/0x600 ? btrfs_search_slot+0x1090/0x1090 ? free_extent_buffer.part.61+0xd7/0x140 ? free_extent_buffer+0x13/0x20 resolve_indirect_refs+0x3e9/0xfc0 ? lock_downgrade+0x3d0/0x3d0 ? __kasan_check_read+0x11/0x20 ? add_prelim_ref.part.11+0x150/0x150 ? lock_downgrade+0x3d0/0x3d0 ? __kasan_check_read+0x11/0x20 ? lock_acquired+0xbb/0x600 ? __kasan_check_write+0x14/0x20 ? do_raw_spin_unlock+0xa8/0x140 ? rb_insert_color+0x30/0x360 ? prelim_ref_insert+0x12d/0x430 find_parent_nodes+0x5c3/0x1830 ? resolve_indirect_refs+0xfc0/0xfc0 ? lock_release+0xc8/0x620 ? fs_reclaim_acquire+0x67/0xf0 ? lock_acquire+0xc7/0x510 ? lock_downgrade+0x3d0/0x3d0 ? lockdep_hardirqs_on_prepare+0x160/0x210 ? lock_release+0xc8/0x620 ? fs_reclaim_acquire+0x67/0xf0 ? lock_acquire+0xc7/0x510 ? poison_range+0x38/0x40 ? unpoison_range+0x14/0x40 ? trace_hardirqs_on+0x55/0x120 btrfs_find_all_roots_safe+0x142/0x1e0 ? find_parent_nodes+0x1830/0x1830 ? btrfs_inode_flags_to_xflags+0x50/0x50 iterate_extent_inodes+0x20e/0x580 ? tree_backref_for_extent+0x230/0x230 ? lock_downgrade+0x3d0/0x3d0 ? read_extent_buffer+0xdd/0x110 ? lock_downgrade+0x3d0/0x3d0 ? __kasan_check_read+0x11/0x20 ? lock_acquired+0xbb/0x600 ? __kasan_check_write+0x14/0x20 ? _raw_spin_unlock+0x22/0x30 ? __kasan_check_write+0x14/0x20 iterate_inodes_from_logical+0x129/0x170 ? iterate_inodes_from_logical+0x129/0x170 ? btrfs_inode_flags_to_xflags+0x50/0x50 ? iterate_extent_inodes+0x580/0x580 ? __vmalloc_node+0x92/0xb0 ? init_data_container+0x34/0xb0 ? init_data_container+0x34/0xb0 ? kvmalloc_node+0x60/0x80 btrfs_ioctl_logical_to_ino+0x158/0x230 btrfs_ioctl+0x205e/0x4040 ? __might_sleep+0x71/0xe0 ? btrfs_ioctl_get_supported_features+0x30/0x30 ? getrusage+0x4b6/0x9c0 ? __kasan_check_read+0x11/0x20 ? lock_release+0xc8/0x620 ? __might_fault+0x64/0xd0 ? lock_acquire+0xc7/0x510 ? lock_downgrade+0x3d0/0x3d0 ? lockdep_hardirqs_on_prepare+0x210/0x210 ? lockdep_hardirqs_on_prepare+0x210/0x210 ? __kasan_check_read+0x11/0x20 ? do_vfs_ioctl+0xfc/0x9d0 ? ioctl_file_clone+0xe0/0xe0 ? lock_downgrade+0x3d0/0x3d0 ? lockdep_hardirqs_on_prepare+0x210/0x210 ? __kasan_check_read+0x11/0x20 ? lock_release+0xc8/0x620 ? __task_pid_nr_ns+0xd3/0x250 ? lock_acquire+0xc7/0x510 ? __fget_files+0x160/0x230 ? __fget_light+0xf2/0x110 __x64_sys_ioctl+0xc3/0x100 do_syscall_64+0x37/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fd1976e2427 Code: 00 00 90 48 8b 05 (...) RSP: 002b:00007fd1955e5cf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fd1955e5f40 RCX: 00007fd1976e2427 RDX: 00007fd1955e5f48 RSI: 00000000c038943b RDI: 0000000000000004 RBP: 0000000001000000 R08: 0000000000000000 R09: 00007fd1955e6120 R10: 0000557835366b00 R11: 0000000000000246 R12: 0000000000000004 R13: 00007fd1955e5f48 R14: 00007fd1955e5f40 R15: 00007fd1955e5ef8 Modules linked in: ---[ end trace ec8931a1c36e57be ]--- (gdb) l *(__tree_mod_log_rewind+0x3b1) 0xffffffff81893521 is in __tree_mod_log_rewind (fs/btrfs/ctree.c:1210). 1205 * the modification. as we're going backwards, we do the 1206 * opposite of each operation here. 1207 */ 1208 switch (tm->op) { 1209 case MOD_LOG_KEY_REMOVE_WHILE_FREEING: 1210 BUG_ON(tm->slot < n); 1211 fallthrough; 1212 case MOD_LOG_KEY_REMOVE_WHILE_MOVING: 1213 case MOD_LOG_KEY_REMOVE: 1214 btrfs_set_node_key(eb, &tm->key, tm->slot); Here's what happens to hit that BUG_ON(): 1) We have one tree mod log user (through fiemap or the logical ino ioctl), with a sequence number of 1, so we have fs_info->tree_mod_seq == 1; 2) Another task is at ctree.c:balance_level() and we have eb X currently as the root of the tree, and we promote its single child, eb Y, as the new root. Then, at ctree.c:balance_level(), we call: tree_mod_log_insert_root(eb X, eb Y, 1); 3) At tree_mod_log_insert_root() we create tree mod log elements for each slot of eb X, of operation type MOD_LOG_KEY_REMOVE_WHILE_FREEING each with a ->logical pointing to ebX->start. These are placed in an array named tm_list. Lets assume there are N elements (N pointers in eb X); 4) Then, still at tree_mod_log_insert_root(), we create a tree mod log element of operation type MOD_LOG_ROOT_REPLACE, ->logical set to ebY->start, ->old_root.logical set to ebX->start, ->old_root.level set to the level of eb X and ->generation set to the generation of eb X; 5) Then tree_mod_log_insert_root() calls tree_mod_log_free_eb() with tm_list as argument. After that, tree_mod_log_free_eb() calls __tree_mod_log_insert() for each member of tm_list in reverse order, from highest slot in eb X, slot N - 1, to slot 0 of eb X; 6) __tree_mod_log_insert() sets the sequence number of each given tree mod log operation - it increments fs_info->tree_mod_seq and sets fs_info->tree_mod_seq as the sequence number of the given tree mod log operation. This means that for the tm_list created at tree_mod_log_insert_root(), the element corresponding to slot 0 of eb X has the highest sequence number (1 + N), and the element corresponding to the last slot has the lowest sequence number (2); 7) Then, after inserting tm_list's elements into the tree mod log rbtree, the MOD_LOG_ROOT_REPLACE element is inserted, which gets the highest sequence number, which is N + 2; 8) Back to ctree.c:balance_level(), we free eb X by calling btrfs_free_tree_block() on it. Because eb X was created in the current transaction, has no other references and writeback did not happen for it, we add it back to the free space cache/tree; 9) Later some other task T allocates the metadata extent from eb X, since it is marked as free space in the space cache/tree, and uses it as a node for some other btree; 10) The tree mod log user task calls btrfs_search_old_slot(), which calls get_old_root(), and finally that calls __tree_mod_log_oldest_root() with time_seq == 1 and eb_root == eb Y; 11) First iteration of the while loop finds the tree mod log element with sequence number N + 2, for the logical address of eb Y and of type MOD_LOG_ROOT_REPLACE; 12) Because the operation type is MOD_LOG_ROOT_REPLACE, we don't break out of the loop, and set root_logical to point to tm->old_root.logical which corresponds to the logical address of eb X; 13) On the next iteration of the while loop, the call to tree_mod_log_search_oldest() returns the smallest tree mod log element for the logical address of eb X, which has a sequence number of 2, an operation type of MOD_LOG_KEY_REMOVE_WHILE_FREEING and corresponds to the old slot N - 1 of eb X (eb X had N items in it before being freed); 14) We then break out of the while loop and return the tree mod log operation of type MOD_LOG_ROOT_REPLACE (eb Y), and not the one for slot N - 1 of eb X, to get_old_root(); 15) At get_old_root(), we process the MOD_LOG_ROOT_REPLACE operation and set "logical" to the logical address of eb X, which was the old root. We then call tree_mod_log_search() passing it the logical address of eb X and time_seq == 1; 16) Then before calling tree_mod_log_search(), task T adds a key to eb X, which results in adding a tree mod log operation of type MOD_LOG_KEY_ADD to the tree mod log - this is done at ctree.c:insert_ptr() - but after adding the tree mod log operation and before updating the number of items in eb X from 0 to 1... 17) The task at get_old_root() calls tree_mod_log_search() and gets the tree mod log operation of type MOD_LOG_KEY_ADD just added by task T. Then it enters the following if branch: if (old_root && tm && tm->op != MOD_LOG_KEY_REMOVE_WHILE_FREEING) { (...) } (...) Calls read_tree_block() for eb X, which gets a reference on eb X but does not lock it - task T has it locked. Then it clones eb X while it has nritems set to 0 in its header, before task T sets nritems to 1 in eb X's header. From hereupon we use the clone of eb X which no other task has access to; 18) Then we call __tree_mod_log_rewind(), passing it the MOD_LOG_KEY_ADD mod log operation we just got from tree_mod_log_search() in the previous step and the cloned version of eb X; 19) At __tree_mod_log_rewind(), we set the local variable "n" to the number of items set in eb X's clone, which is 0. Then we enter the while loop, and in its first iteration we process the MOD_LOG_KEY_ADD operation, which just decrements "n" from 0 to (u32)-1, since "n" is declared with a type of u32. At the end of this iteration we call rb_next() to find the next tree mod log operation for eb X, that gives us the mod log operation of type MOD_LOG_KEY_REMOVE_WHILE_FREEING, for slot 0, with a sequence number of N + 1 (steps 3 to 6); 20) Then we go back to the top of the while loop and trigger the following BUG_ON(): (...) switch (tm->op) { case MOD_LOG_KEY_REMOVE_WHILE_FREEING: BUG_ON(tm->slot < n); fallthrough; (...) Because "n" has a value of (u32)-1 (4294967295) and tm->slot is 0. Fix this by taking a read lock on the extent buffer before cloning it at ctree.c:get_old_root(). This should be done regardless of the extent buffer having been freed and reused, as a concurrent task might be modifying it (while holding a write lock on it). Reported-by: Zygo Blaxell <[email protected]> Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Fixes: 834328a ("Btrfs: tree mod log's old roots could still be part of the tree") CC: [email protected] # 4.4+ Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to subscribe to this conversation on GitHub.
Already have an account?
Sign in.
We want to compile the MPTCP source on ubuntu.
Is there patch for ubuntu?
The text was updated successfully, but these errors were encountered: