This repository has been archived by the owner on Apr 18, 2024. It is now read-only.
Kernel 2.6.35.14 - Patchfile #110
Comments
|
There are no plans to back port Multipath TCP on 2.6x kernels. The TCP stack has changed too much with the move to 3.x and doing a back port would be very difficult. |
cpaasch
pushed a commit
that referenced
this issue
Nov 2, 2017
commit 692b482 upstream. Josef reported a HARDIRQ-safe -> HARDIRQ-unsafe lock order detected by lockdep: [ 1270.472259] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected [ 1270.472783] 4.14.0-rc1-xfstests-12888-g76833e8 #110 Not tainted [ 1270.473240] ----------------------------------------------------- [ 1270.473710] kworker/u5:2/5157 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 1270.474239] (&(&lock->wait_lock)->rlock){+.+.}, at: [<ffffffff8da253d2>] __mutex_unlock_slowpath+0xa2/0x280 [ 1270.474994] [ 1270.474994] and this task is already holding: [ 1270.475440] (&pool->lock/1){-.-.}, at: [<ffffffff8d2992f6>] worker_thread+0x366/0x3c0 [ 1270.476046] which would create a new lock dependency: [ 1270.476436] (&pool->lock/1){-.-.} -> (&(&lock->wait_lock)->rlock){+.+.} [ 1270.476949] [ 1270.476949] but this new dependency connects a HARDIRQ-irq-safe lock: [ 1270.477553] (&pool->lock/1){-.-.} ... [ 1270.488900] to a HARDIRQ-irq-unsafe lock: [ 1270.489327] (&(&lock->wait_lock)->rlock){+.+.} ... [ 1270.494735] Possible interrupt unsafe locking scenario: [ 1270.494735] [ 1270.495250] CPU0 CPU1 [ 1270.495600] ---- ---- [ 1270.495947] lock(&(&lock->wait_lock)->rlock); [ 1270.496295] local_irq_disable(); [ 1270.496753] lock(&pool->lock/1); [ 1270.497205] lock(&(&lock->wait_lock)->rlock); [ 1270.497744] <Interrupt> [ 1270.497948] lock(&pool->lock/1); , which will cause a irq inversion deadlock if the above lock scenario happens. The root cause of this safe -> unsafe lock order is the mutex_unlock(pool->manager_arb) in manage_workers() with pool->lock held. Unlocking mutex while holding an irq spinlock was never safe and this problem has been around forever but it never got noticed because the only time the mutex is usually trylocked while holding irqlock making actual failures very unlikely and lockdep annotation missed the condition until the recent b9c16a0 ("locking/mutex: Fix lockdep_assert_held() fail"). Using mutex for pool->manager_arb has always been a bit of stretch. It primarily is an mechanism to arbitrate managership between workers which can easily be done with a pool flag. The only reason it became a mutex is that pool destruction path wants to exclude parallel managing operations. This patch replaces the mutex with a new pool flag POOL_MANAGER_ACTIVE and make the destruction path wait for the current manager on a wait queue. v2: Drop unnecessary flag clearing before pool destruction as suggested by Boqun. Signed-off-by: Tejun Heo <[email protected]> Reported-by: Josef Bacik <[email protected]> Reviewed-by: Lai Jiangshan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Boqun Feng <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
cpaasch
pushed a commit
that referenced
this issue
Nov 15, 2017
commit 692b482 upstream. Josef reported a HARDIRQ-safe -> HARDIRQ-unsafe lock order detected by lockdep: [ 1270.472259] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected [ 1270.472783] 4.14.0-rc1-xfstests-12888-g76833e8 #110 Not tainted [ 1270.473240] ----------------------------------------------------- [ 1270.473710] kworker/u5:2/5157 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 1270.474239] (&(&lock->wait_lock)->rlock){+.+.}, at: [<ffffffff8da253d2>] __mutex_unlock_slowpath+0xa2/0x280 [ 1270.474994] [ 1270.474994] and this task is already holding: [ 1270.475440] (&pool->lock/1){-.-.}, at: [<ffffffff8d2992f6>] worker_thread+0x366/0x3c0 [ 1270.476046] which would create a new lock dependency: [ 1270.476436] (&pool->lock/1){-.-.} -> (&(&lock->wait_lock)->rlock){+.+.} [ 1270.476949] [ 1270.476949] but this new dependency connects a HARDIRQ-irq-safe lock: [ 1270.477553] (&pool->lock/1){-.-.} ... [ 1270.488900] to a HARDIRQ-irq-unsafe lock: [ 1270.489327] (&(&lock->wait_lock)->rlock){+.+.} ... [ 1270.494735] Possible interrupt unsafe locking scenario: [ 1270.494735] [ 1270.495250] CPU0 CPU1 [ 1270.495600] ---- ---- [ 1270.495947] lock(&(&lock->wait_lock)->rlock); [ 1270.496295] local_irq_disable(); [ 1270.496753] lock(&pool->lock/1); [ 1270.497205] lock(&(&lock->wait_lock)->rlock); [ 1270.497744] <Interrupt> [ 1270.497948] lock(&pool->lock/1); , which will cause a irq inversion deadlock if the above lock scenario happens. The root cause of this safe -> unsafe lock order is the mutex_unlock(pool->manager_arb) in manage_workers() with pool->lock held. Unlocking mutex while holding an irq spinlock was never safe and this problem has been around forever but it never got noticed because the only time the mutex is usually trylocked while holding irqlock making actual failures very unlikely and lockdep annotation missed the condition until the recent b9c16a0 ("locking/mutex: Fix lockdep_assert_held() fail"). Using mutex for pool->manager_arb has always been a bit of stretch. It primarily is an mechanism to arbitrate managership between workers which can easily be done with a pool flag. The only reason it became a mutex is that pool destruction path wants to exclude parallel managing operations. This patch replaces the mutex with a new pool flag POOL_MANAGER_ACTIVE and make the destruction path wait for the current manager on a wait queue. v2: Drop unnecessary flag clearing before pool destruction as suggested by Boqun. Signed-off-by: Tejun Heo <[email protected]> Reported-by: Josef Bacik <[email protected]> Reviewed-by: Lai Jiangshan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Boqun Feng <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
pabeni
pushed a commit
to pabeni/mptcp
that referenced
this issue
Apr 15, 2019
syzkaller was able to generate the following UAF in bpf: BUG: KASAN: use-after-free in lookup_last fs/namei.c:2269 [inline] BUG: KASAN: use-after-free in path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318 Read of size 1 at addr ffff8801c4865c47 by task syz-executor2/9423 CPU: 0 PID: 9423 Comm: syz-executor2 Not tainted 4.20.0-rc1-next-20181109+ multipath-tcp#110 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x39d lib/dump_stack.c:113 print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430 lookup_last fs/namei.c:2269 [inline] path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318 filename_lookup+0x26a/0x520 fs/namei.c:2348 user_path_at_empty+0x40/0x50 fs/namei.c:2608 user_path include/linux/namei.h:62 [inline] do_mount+0x180/0x1ff0 fs/namespace.c:2980 ksys_mount+0x12d/0x140 fs/namespace.c:3258 __do_sys_mount fs/namespace.c:3272 [inline] __se_sys_mount fs/namespace.c:3269 [inline] __x64_sys_mount+0xbe/0x150 fs/namespace.c:3269 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457569 Code: fd b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fde6ed96c78 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000457569 RDX: 0000000020000040 RSI: 0000000020000000 RDI: 0000000000000000 RBP: 000000000072bf00 R08: 0000000020000340 R09: 0000000000000000 R10: 0000000000200000 R11: 0000000000000246 R12: 00007fde6ed976d4 R13: 00000000004c2c24 R14: 00000000004d4990 R15: 00000000ffffffff Allocated by task 9424: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553 __do_kmalloc mm/slab.c:3722 [inline] __kmalloc_track_caller+0x157/0x760 mm/slab.c:3737 kstrdup+0x39/0x70 mm/util.c:49 bpf_symlink+0x26/0x140 kernel/bpf/inode.c:356 vfs_symlink+0x37a/0x5d0 fs/namei.c:4127 do_symlinkat+0x242/0x2d0 fs/namei.c:4154 __do_sys_symlink fs/namei.c:4173 [inline] __se_sys_symlink fs/namei.c:4171 [inline] __x64_sys_symlink+0x59/0x80 fs/namei.c:4171 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9425: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xcf/0x230 mm/slab.c:3817 bpf_evict_inode+0x11f/0x150 kernel/bpf/inode.c:565 evict+0x4b9/0x980 fs/inode.c:558 iput_final fs/inode.c:1550 [inline] iput+0x674/0xa90 fs/inode.c:1576 do_unlinkat+0x733/0xa30 fs/namei.c:4069 __do_sys_unlink fs/namei.c:4110 [inline] __se_sys_unlink fs/namei.c:4108 [inline] __x64_sys_unlink+0x42/0x50 fs/namei.c:4108 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe In this scenario path lookup under RCU is racing with the final unlink in case of symlinks. As Linus puts it in his analysis: [...] We actually RCU-delay the inode freeing itself, but when we do the final iput(), the "evict()" function is called synchronously. Now, the simple fix would seem to just RCU-delay the kfree() of the symlink data in bpf_evict_inode(). Maybe that's the right thing to do. [...] Al suggested to piggy-back on the ->destroy_inode() callback in order to implement RCU deferral there which can then kfree() the inode->i_link eventually right before putting inode back into inode cache. By reusing free_inode_nonrcu() from there we can avoid the need for our own inode cache and just reuse generic one as we currently do. And in-fact on top of all this we should just get rid of the bpf_evict_inode() entirely. This means truncate_inode_pages_final() and clear_inode() will then simply be called by the fs core via evict(). Dropping the reference should really only be done when inode is unhashed and nothing reachable anymore, so it's better also moved into the final ->destroy_inode() callback. Fixes: 0f98621 ("bpf, inode: add support for symlinks and fix mtime/ctime") Reported-by: [email protected] Reported-by: [email protected] Reported-by: [email protected] Suggested-by: Al Viro <[email protected]> Analyzed-by: Linus Torvalds <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Acked-by: Linus Torvalds <[email protected]> Acked-by: Al Viro <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/T/
cpaasch
pushed a commit
that referenced
this issue
Apr 21, 2019
[ Upstream commit 1da6c4d ] syzkaller was able to generate the following UAF in bpf: BUG: KASAN: use-after-free in lookup_last fs/namei.c:2269 [inline] BUG: KASAN: use-after-free in path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318 Read of size 1 at addr ffff8801c4865c47 by task syz-executor2/9423 CPU: 0 PID: 9423 Comm: syz-executor2 Not tainted 4.20.0-rc1-next-20181109+ #110 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x39d lib/dump_stack.c:113 print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430 lookup_last fs/namei.c:2269 [inline] path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318 filename_lookup+0x26a/0x520 fs/namei.c:2348 user_path_at_empty+0x40/0x50 fs/namei.c:2608 user_path include/linux/namei.h:62 [inline] do_mount+0x180/0x1ff0 fs/namespace.c:2980 ksys_mount+0x12d/0x140 fs/namespace.c:3258 __do_sys_mount fs/namespace.c:3272 [inline] __se_sys_mount fs/namespace.c:3269 [inline] __x64_sys_mount+0xbe/0x150 fs/namespace.c:3269 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457569 Code: fd b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fde6ed96c78 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000457569 RDX: 0000000020000040 RSI: 0000000020000000 RDI: 0000000000000000 RBP: 000000000072bf00 R08: 0000000020000340 R09: 0000000000000000 R10: 0000000000200000 R11: 0000000000000246 R12: 00007fde6ed976d4 R13: 00000000004c2c24 R14: 00000000004d4990 R15: 00000000ffffffff Allocated by task 9424: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553 __do_kmalloc mm/slab.c:3722 [inline] __kmalloc_track_caller+0x157/0x760 mm/slab.c:3737 kstrdup+0x39/0x70 mm/util.c:49 bpf_symlink+0x26/0x140 kernel/bpf/inode.c:356 vfs_symlink+0x37a/0x5d0 fs/namei.c:4127 do_symlinkat+0x242/0x2d0 fs/namei.c:4154 __do_sys_symlink fs/namei.c:4173 [inline] __se_sys_symlink fs/namei.c:4171 [inline] __x64_sys_symlink+0x59/0x80 fs/namei.c:4171 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9425: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xcf/0x230 mm/slab.c:3817 bpf_evict_inode+0x11f/0x150 kernel/bpf/inode.c:565 evict+0x4b9/0x980 fs/inode.c:558 iput_final fs/inode.c:1550 [inline] iput+0x674/0xa90 fs/inode.c:1576 do_unlinkat+0x733/0xa30 fs/namei.c:4069 __do_sys_unlink fs/namei.c:4110 [inline] __se_sys_unlink fs/namei.c:4108 [inline] __x64_sys_unlink+0x42/0x50 fs/namei.c:4108 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe In this scenario path lookup under RCU is racing with the final unlink in case of symlinks. As Linus puts it in his analysis: [...] We actually RCU-delay the inode freeing itself, but when we do the final iput(), the "evict()" function is called synchronously. Now, the simple fix would seem to just RCU-delay the kfree() of the symlink data in bpf_evict_inode(). Maybe that's the right thing to do. [...] Al suggested to piggy-back on the ->destroy_inode() callback in order to implement RCU deferral there which can then kfree() the inode->i_link eventually right before putting inode back into inode cache. By reusing free_inode_nonrcu() from there we can avoid the need for our own inode cache and just reuse generic one as we currently do. And in-fact on top of all this we should just get rid of the bpf_evict_inode() entirely. This means truncate_inode_pages_final() and clear_inode() will then simply be called by the fs core via evict(). Dropping the reference should really only be done when inode is unhashed and nothing reachable anymore, so it's better also moved into the final ->destroy_inode() callback. Fixes: 0f98621 ("bpf, inode: add support for symlinks and fix mtime/ctime") Reported-by: [email protected] Reported-by: [email protected] Reported-by: [email protected] Suggested-by: Al Viro <[email protected]> Analyzed-by: Linus Torvalds <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Acked-by: Linus Torvalds <[email protected]> Acked-by: Al Viro <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/T/ Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
cpaasch
pushed a commit
that referenced
this issue
May 23, 2019
[ Upstream commit 1da6c4d ] syzkaller was able to generate the following UAF in bpf: BUG: KASAN: use-after-free in lookup_last fs/namei.c:2269 [inline] BUG: KASAN: use-after-free in path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318 Read of size 1 at addr ffff8801c4865c47 by task syz-executor2/9423 CPU: 0 PID: 9423 Comm: syz-executor2 Not tainted 4.20.0-rc1-next-20181109+ #110 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x39d lib/dump_stack.c:113 print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430 lookup_last fs/namei.c:2269 [inline] path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318 filename_lookup+0x26a/0x520 fs/namei.c:2348 user_path_at_empty+0x40/0x50 fs/namei.c:2608 user_path include/linux/namei.h:62 [inline] do_mount+0x180/0x1ff0 fs/namespace.c:2980 ksys_mount+0x12d/0x140 fs/namespace.c:3258 __do_sys_mount fs/namespace.c:3272 [inline] __se_sys_mount fs/namespace.c:3269 [inline] __x64_sys_mount+0xbe/0x150 fs/namespace.c:3269 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457569 Code: fd b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fde6ed96c78 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000457569 RDX: 0000000020000040 RSI: 0000000020000000 RDI: 0000000000000000 RBP: 000000000072bf00 R08: 0000000020000340 R09: 0000000000000000 R10: 0000000000200000 R11: 0000000000000246 R12: 00007fde6ed976d4 R13: 00000000004c2c24 R14: 00000000004d4990 R15: 00000000ffffffff Allocated by task 9424: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553 __do_kmalloc mm/slab.c:3722 [inline] __kmalloc_track_caller+0x157/0x760 mm/slab.c:3737 kstrdup+0x39/0x70 mm/util.c:49 bpf_symlink+0x26/0x140 kernel/bpf/inode.c:356 vfs_symlink+0x37a/0x5d0 fs/namei.c:4127 do_symlinkat+0x242/0x2d0 fs/namei.c:4154 __do_sys_symlink fs/namei.c:4173 [inline] __se_sys_symlink fs/namei.c:4171 [inline] __x64_sys_symlink+0x59/0x80 fs/namei.c:4171 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9425: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xcf/0x230 mm/slab.c:3817 bpf_evict_inode+0x11f/0x150 kernel/bpf/inode.c:565 evict+0x4b9/0x980 fs/inode.c:558 iput_final fs/inode.c:1550 [inline] iput+0x674/0xa90 fs/inode.c:1576 do_unlinkat+0x733/0xa30 fs/namei.c:4069 __do_sys_unlink fs/namei.c:4110 [inline] __se_sys_unlink fs/namei.c:4108 [inline] __x64_sys_unlink+0x42/0x50 fs/namei.c:4108 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe In this scenario path lookup under RCU is racing with the final unlink in case of symlinks. As Linus puts it in his analysis: [...] We actually RCU-delay the inode freeing itself, but when we do the final iput(), the "evict()" function is called synchronously. Now, the simple fix would seem to just RCU-delay the kfree() of the symlink data in bpf_evict_inode(). Maybe that's the right thing to do. [...] Al suggested to piggy-back on the ->destroy_inode() callback in order to implement RCU deferral there which can then kfree() the inode->i_link eventually right before putting inode back into inode cache. By reusing free_inode_nonrcu() from there we can avoid the need for our own inode cache and just reuse generic one as we currently do. And in-fact on top of all this we should just get rid of the bpf_evict_inode() entirely. This means truncate_inode_pages_final() and clear_inode() will then simply be called by the fs core via evict(). Dropping the reference should really only be done when inode is unhashed and nothing reachable anymore, so it's better also moved into the final ->destroy_inode() callback. Fixes: 0f98621 ("bpf, inode: add support for symlinks and fix mtime/ctime") Reported-by: [email protected] Reported-by: [email protected] Reported-by: [email protected] Suggested-by: Al Viro <[email protected]> Analyzed-by: Linus Torvalds <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Acked-by: Linus Torvalds <[email protected]> Acked-by: Al Viro <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/T/ Signed-off-by: Sasha Levin (Microsoft) <[email protected]>
matttbe
pushed a commit
that referenced
this issue
Nov 25, 2020
commit df5b0ab upstream. Limit the CPU number to num_possible_cpus(), because setting it to a value lower than INT_MAX but higher than NR_CPUS produces the following error on reboot and shutdown: BUG: unable to handle page fault for address: ffffffff90ab1bb0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1c09067 P4D 1c09067 PUD 1c0a063 PMD 0 Oops: 0000 [#1] SMP CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.9.0-rc8-kvm #110 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:migrate_to_reboot_cpu+0xe/0x60 Code: ea ea 00 48 89 fa 48 c7 c7 30 57 f1 81 e9 fa ef ff ff 66 2e 0f 1f 84 00 00 00 00 00 53 8b 1d d5 ea ea 00 e8 14 33 fe ff 89 da <48> 0f a3 15 ea fc bd 00 48 89 d0 73 29 89 c2 c1 e8 06 65 48 8b 3c RSP: 0018:ffffc90000013e08 EFLAGS: 00010246 RAX: ffff88801f0a0000 RBX: 0000000077359400 RCX: 0000000000000000 RDX: 0000000077359400 RSI: 0000000000000002 RDI: ffffffff81c199e0 RBP: ffffffff81c1e3c0 R08: ffff88801f41f000 R09: ffffffff81c1e348 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 00007f32bedf8830 R14: 00000000fee1dead R15: 0000000000000000 FS: 00007f32bedf8980(0000) GS:ffff88801f480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff90ab1bb0 CR3: 000000001d057000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __do_sys_reboot.cold+0x34/0x5b do_syscall_64+0x2d/0x40 Fixes: 1b3a5d0 ("reboot: move arch/x86 reboot= handling to generic kernel") Signed-off-by: Matteo Croce <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Fabian Frederick <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: Kees Cook <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Pavel Tatashin <[email protected]> Cc: Petr Mladek <[email protected]> Cc: Robin Holt <[email protected]> Cc: <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]> [sudip: use reboot_mode instead of mode] Signed-off-by: Sudip Mukherjee <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
matttbe
pushed a commit
that referenced
this issue
Nov 25, 2020
commit df5b0ab upstream. Limit the CPU number to num_possible_cpus(), because setting it to a value lower than INT_MAX but higher than NR_CPUS produces the following error on reboot and shutdown: BUG: unable to handle page fault for address: ffffffff90ab1bb0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1c09067 P4D 1c09067 PUD 1c0a063 PMD 0 Oops: 0000 [#1] SMP CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.9.0-rc8-kvm #110 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:migrate_to_reboot_cpu+0xe/0x60 Code: ea ea 00 48 89 fa 48 c7 c7 30 57 f1 81 e9 fa ef ff ff 66 2e 0f 1f 84 00 00 00 00 00 53 8b 1d d5 ea ea 00 e8 14 33 fe ff 89 da <48> 0f a3 15 ea fc bd 00 48 89 d0 73 29 89 c2 c1 e8 06 65 48 8b 3c RSP: 0018:ffffc90000013e08 EFLAGS: 00010246 RAX: ffff88801f0a0000 RBX: 0000000077359400 RCX: 0000000000000000 RDX: 0000000077359400 RSI: 0000000000000002 RDI: ffffffff81c199e0 RBP: ffffffff81c1e3c0 R08: ffff88801f41f000 R09: ffffffff81c1e348 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 00007f32bedf8830 R14: 00000000fee1dead R15: 0000000000000000 FS: 00007f32bedf8980(0000) GS:ffff88801f480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff90ab1bb0 CR3: 000000001d057000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __do_sys_reboot.cold+0x34/0x5b do_syscall_64+0x2d/0x40 Fixes: 1b3a5d0 ("reboot: move arch/x86 reboot= handling to generic kernel") Signed-off-by: Matteo Croce <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Fabian Frederick <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: Kees Cook <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Pavel Tatashin <[email protected]> Cc: Petr Mladek <[email protected]> Cc: Robin Holt <[email protected]> Cc: <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]> [sudip: use reboot_mode instead of mode] Signed-off-by: Sudip Mukherjee <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to subscribe to this conversation on GitHub.
Already have an account?
Sign in.
Hello Community,
I would like to use MPTCP with a relatively old kernel (2.6.35.14). Reason: I use a mx.53 based router. Unfortunately, there are no newer kernel which supports this processor.
A patch file would fully satisfy me.
Are there any ideas, suggestions or even workarounds?
Kind regards
Chris
The text was updated successfully, but these errors were encountered: