BUG: Add-on doesnt seem to survive a restart

[nappyjim]

Describe the bug

My cameras work fine. But then after a power cycle when I go to the WebUI, it says its detected 7 cameras, but I dont see anything. Then after I press the back button, or some combination of buttons I still cant quite figure out, I am then brought back to the login screen when I have to enter the wyze API again.

Here is my WebUI

Affected Bridge Version

v2.10.2

Bridge type

Docker Run/Compose

Affected Camera(s)

All

Affected Camera Firmware

No response

docker-compose or config (if applicable)

[WyzeBridge] 👻 test is offline.
[WyzeBridge] test will cooldown for 10s.
[WyzeBridge] 👻 Basement is offline.
[WyzeBridge] Basement will cooldown for 10s.
[WyzeBridge] 📕 Client stopped reading from backyard
[WyzeBridge] 📕 Client stopped reading from bird-feeder
[WyzeBridge] 📕 Client stopped reading from driveway
[WyzeBridge] 🎉 Connecting to WyzeCam V3 - test on 192.168.86.16
[WyzeBridge] 🎉 Connecting to WyzeCam V2 - Basement on 192.168.86.11
[WyzeBridge] 📖 New client reading from bird-feeder
[WyzeBridge] 📖 New client reading from driveway
[WyzeBridge] 📖 New client reading from backyard
[basement] [-90] IOTC_ER_DEVICE_OFFLINE
[WyzeBridge] 📕 Client stopped reading from backyard
[WyzeBridge] 👻 Basement is offline.
[WyzeBridge] Basement will cooldown for 10s.
[WyzeBridge] 📕 Client stopped reading from bird-feeder
[test] [-90] IOTC_ER_DEVICE_OFFLINE
[WyzeBridge] 👻 test is offline.
[WyzeBridge] test will cooldown for 10s.
[WyzeBridge] 📕 Client stopped reading from driveway
[WyzeBridge] [MOTION] Motion detected on backyard at  18:05:42
[WyzeBridge] ☁️ Pulling "backyard" thumbnail to /media/wyze/img/backyard.jpg
[WyzeBridge] ERROR pulling thumbnail：404 Client Error: Not Found for url: https://c-t-usw2.s3.us-west-2.amazonaws.com/D03F27B2BDAC/2024-08-26/D03F27B2BDAC011724713542_1724713542893_1_1_0/209b9e09927444d9a473d64ae0fcccf1.jpg?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Date=20240826T230544Z&X-Amz-SignedHeaders=host&X-Amz-Credential=AKIAYS2NUP7ILWMJOSP5%2F20240826%2Fus-west-2%2Fs3%2Faws4_request&X-Amz-Expires=1200&X-Amz-Signature=69567d8ce0d428efcc5f71defec0df868a30c32d62517ea53aa0c4957d08c1fb
[WyzeBridge] 🎉 Connecting to WyzeCam V3 - test on 192.168.86.16
[WyzeBridge] 🎉 Connecting to WyzeCam V2 - Basement on 192.168.86.11
[WyzeBridge] 📖 New client reading from bird-feeder
[WyzeBridge] 📖 New client reading from backyard
[WyzeBridge] 📖 New client reading from driveway
[WyzeBridge] 📕 Client stopped reading from backyard
[WyzeBridge] 📕 Client stopped reading from bird-feeder
[test] [-90] IOTC_ER_DEVICE_OFFLINE
[basement] [-90] IOTC_ER_DEVICE_OFFLINE
[WyzeBridge] 👻 test is offline.
[WyzeBridge] test will cooldown for 10s.
[WyzeBridge] 👻 Basement is offline.
[WyzeBridge] Basement will cooldown for 10s.
[WyzeBridge] 📕 Client stopped reading from driveway
[WyzeBridge] [MOTION] Motion detected on driveway at  18:11:12
[WyzeBridge] ☁️ Pulling "driveway" thumbnail to /media/wyze/img/driveway.jpg
[WyzeBridge] 🎉 Connecting to WyzeCam V3 - test on 192.168.86.16
[WyzeBridge] 🎉 Connecting to WyzeCam V2 - Basement on 192.168.86.11
[WyzeBridge] 📖 New client reading from bird-feeder
[WyzeBridge] 📖 New client reading from driveway
[WyzeBridge] 📖 New client reading from backyard
[WyzeBridge] 📕 Client stopped reading from bird-feeder
[WyzeBridge] 📕 Client stopped reading from backyard
[test] [-90] IOTC_ER_DEVICE_OFFLINE
[WyzeBridge] 👻 test is offline.
[WyzeBridge] test will cooldown for 10s.
[WyzeBridge] 📕 Client stopped reading from driveway
[basement] [-90] IOTC_ER_DEVICE_OFFLINE
[WyzeBridge] 👻 Basement is offline.
[WyzeBridge] Basement will cooldown for 10s.
[WyzeBridge] 🎉 Connecting to WyzeCam V3 - test on 192.168.86.16
[WyzeBridge] 🎉 Connecting to WyzeCam V2 - Basement on 192.168.86.11
[WyzeBridge] 📖 New client reading from bird-feeder
[WyzeBridge] 📖 New client reading from driveway
[WyzeBridge] 📖 New client reading from backyard
[WyzeBridge] 📕 Client stopped reading from bird-feeder
[test] [-90] IOTC_ER_DEVICE_OFFLINE
[basement] [-90] IOTC_ER_DEVICE_OFFLINE
[WyzeBridge] 📕 Client stopped reading from backyard
[WyzeBridge] 👻 test is offline.
[WyzeBridge] test will cooldown for 10s.
[WyzeBridge] 👻 Basement is offline.
[WyzeBridge] Basement will cooldown for 10s.
[WyzeBridge] 📕 Client stopped reading from driveway
[WyzeBridge] 🏠 Home Assistant Mode

🚀 DOCKER-WYZE-BRIDGE v2.10.2 X86_64

[WyzeBridge] [WARN] Credentials are NOT set
[WyzeBridge] 📚 Using 'auth' from local cache...
[WyzeBridge] [AUTH] WB_AUTH=True
 * Serving Flask app 'frontend'
 * Debug mode: off
[WyzeBridge] WARNING: This is a development server. Do not use it in a production deployment. Use a production WSGI server instead.
 * Running on all addresses (0.0.0.0)
 * Running on http://127.0.0.1:5000
 * Running on http://172.30.33.6:5000
[WyzeBridge] Press CTRL+C to quit
[WyzeBridge] [AUTH] WB_USERNAME=wbadmin
Exception in thread Thread-1:
Traceback (most recent call last):
  File "/usr/local/lib/python3.12/threading.py", line 1075, in _bootstrap_inner
    self.run()
  File "/app/wyze_bridge.py", line 33, in run
    self._initialize(fresh_data)
  File "/app/wyze_bridge.py", line 37, in _initialize
    WbAuth.set_email(email=self.api.creds.email, force=fresh_data)
  File "/app/wyzebridge/auth.py", line 71, in set_email
    logger.info(f"[AUTH] WB_PASSWORD={cls._pass[0]}{'*'*(len(cls._pass)-1)}")
                                      ~~~~~~~~~^^^
IndexError: string index out of range
[WyzeBridge] 📚 Using 'cameras' from local cache...
[WyzeBridge] 172.30.32.2 - - [28/Aug/2024 20:50:15] "GET / HTTP/1.1" 200 -
[WyzeBridge] 172.30.32.2 - - [28/Aug/2024 20:50:15] "GET /static/bulma.css HTTP/1.1" 200 -
[WyzeBridge] 172.30.32.2 - - [28/Aug/2024 20:50:15] "GET /static/site.css HTTP/1.1" 200 -
[WyzeBridge] 172.30.32.2 - - [28/Aug/2024 20:50:15] "GET /static/site.js HTTP/1.1" 200 -
[WyzeBridge] 172.30.32.2 - - [28/Aug/2024 20:50:15] "GET /static/bulma-toast.js HTTP/1.1" 200 -

[mrlt8]

Thanks for the bug report! could you try the dev image to see if that helps?