A simple secure PHP micro service to provide some BIRD protocol / routing information via a HTTP API as JSON, with an optional built-in looking-glass implementation.
This is the winning project from the RIPE IXP Tools Hackaton just prior to RIPE73 in Madrid, Spain. Since the hackathon, substantial improvements have been made.
The end of workshop presentation can be found here: [Keynote] [PDF]. A more detailed presentation to the Open Source Working Group at RIPE73, delivered by @nickhilliard, can be found here: [VIDEO]
Author: Barry O'Donovan, INEX, Dublin, Ireland
INEX runs a number of BIRD instances and many of them have a public looking glass powered by Bird's Eye as a standalone live example and also integrated with IXP Manager as a frontend consumer.
- INEX Cork IPv4 Router Collector: https://www.inex.ie/rc1-cork-ipv4/
- INEX Cork IPv6 Router Collector: https://www.inex.ie/rc1-cork-ipv6/
The landing pages for the above also document the API calls available.
You can see the IXP Manager integration for ~30 BIRD daemons at INEX at https://www.inex.ie/ixp/lg. GR-IX have also a public IXP Manager integration at: https://portal.gr-ix.gr/lg.
At the hackathon, the team also produced consumers of this API:
- https://github.com/dfkbg/birdseye - Python CLI consumer by Daniel Karrenberg
- https://github.com/ecix/birdseye - Python based web consumer by Matthias Hannig
Historically, IXPs made route collector and route server information available via looking-glasses. Over the past few years, many IXPs have selected BIRD as their route server / collector BGP daemon for a number of good reasons.
BIRD lacks an API to allow IXPs to provide these looking glass type tools. Moreover, this also affects an IXP's ability to monitor these routing daemons and peering participant sessions to them.
In a typical IXP, there will be six daemons per peering LAN:
- two route servers and one route collector
- separate daemon for ipv4 and ipv6
Having looked at existing BIRD LG implementations, INEX could not identify one that was designed with security in mind. Bird's Eye was written with security as a primary consideration.
As this is intended to be deployed on an IXP's route server / route collector, security is vital. In that regard, the following considerations have been made:
- Natural rate limiting via caching by default. All queries are cached for a (configurable) period of at least one minute. This means the most you can hit the BIRD daemon for a specific request is once per minute.
- Built in rate limiter for queries that take variable parameters (e.g. route lookup).
- Strict parameter parsing and checking.
- Bundled
birdcbash script for safe use via sudo - the web process will require this to access the BIRD socket. birdcexecuted in restricted mode, to allow ''show'' commands only.
This API was not designed with the notion of making it publicly available. Ideally it would be run on an internal private network and fronted by one of the looking glass frontends above that consume this API, thereby providing multiple levels of API parameter validation.
In an ideal world, this micro-service will be deprecated once the BIRD developers release a version with a built-in HTTP JSON API. This is a (hopefully) temporary solution to plug a gap.
This is a basic Lumen PHP application and the requirements are:
- PHP >= 5.5.9
- Mbstring PHP Extension
Download the release package (ensure you get the latest version rather than the example version listed below!) and install on your server. E.g.:
# E.g. Ubuntu 16.04 LTS
apt-get install php-cgi php-mbstring php-xml unzip
# E.g. Ubuntu 14.04 LTS
# apt-get install php5-cgi unzip
cd /srv
wget https://github.com/inex/birdseye/releases/download/v1.1.0/birdseye-vx.y.z.tar.bz2
tar jxf birdseye-vx.y.z.tar.bz2
cd birdseye-vx.y.z
chown -R www-data: storage # or the appropriate web user on your systemYou'll need a web server to front it. Apache or Lighttpd are good choices. As the requirements are small and you most likely don't have any other use for a web server on the route server / collector boxes, Lighttpd has a small footprint:
apt-get install lighttpd
lighty-enable-mod fastcgi
lighty-enable-mod fastcgi-phpAnd configure Lighttpd - see data/configs/lighttpd.conf for an example.
If you prefer to install from source with composer:
git clone https://github.com/inex/birdseye.git
cd birdseye
composer install
chown -R www-data: storage # or the appropriate web user on your systemWe have tried to make configuration as easy as possible while allowing for the fact that there will typically be at least two BIRD processes to query on the same server. An explanation is easiest with an example:
Let's say there is a route server called rs1.inex.ie which provides both IPv4 and IPv6 services to two separate peering LANs.
To query the individual four daemons, we create DNS aliases as follows:
rs1-lan1-ipv4.inex.ie IN CNAME rs1.inex.ie
rs1-lan1-ipv6.inex.ie IN CNAME rs1.inex.ie
rs1-lan2-ipv4.inex.ie IN CNAME rs1.inex.ie
rs1-lan2-ipv6.inex.ie IN CNAME rs1.inex.ie
The micro-service will extract the first element of the hostname (e.g. rs1-lan1-ipv4, see beginning of bootstrap/app.php) and look for an environment file in the applications root directory (e.g. /srv/birdseye) named as follows for the above examples:
rs1-lan1-ipv4.inex.ie -> /srv/birdseye/birdseye-rs1-lan1-ipv4.env
rs1-lan1-ipv6.inex.ie -> /srv/birdseye/birdseye-rs1-lan1-ipv6.env
rs1-lan2-ipv4.inex.ie -> /srv/birdseye/birdseye-rs1-lan2-ipv4.env
rs1-lan2-ipv6.inex.ie -> /srv/birdseye/birdseye-rs1-lan2-ipv6.env
To create your env file, just (following the above naming convention):
cd /srv/birdseye
cp .env.example birdseye-rs1-lan1-ipv4.env
If you do not want to use hostnames and your Bird's Eye installation is behind a proxy, you can set the same element as above in the HTTP request header: X-BIRDSEYE. See the Varnish example below in the Serving Behind a Proxy section.
This example file has sane defaults but you need to edit it and fix the BIRDC parameter. In our naming case above (and for rs1-lan1-ipv4.inex.ie) and with Bird v1.x.y we'd set it to:
BIRDC="/usr/bin/sudo /srv/birdseye/bin/birdc -4 -s /var/run/bird/rs1-lan1-ipv4.ctl"
with the assumption that we've named and located the BIRD socket at that location. If you are using Bird v1.x.y with the IPv6 daemon, change the -4 switch to -6. From Bird's Eye v1.2.0 onwards, we now also support Bird v2; in this case use the -2 switch.
If you have a single BIRD daemon, you can skip DNS and just do:
cp .env.example .envThe last thing you need to do is give the www-data (or the appropriate web server user) user permission to run the birdc script. Edit /etc/sudoers and add (example):
www-data ALL=(ALL) NOPASSWD: /srv/birdseye/bin/birdc
This API has an optional built-in looking glass which utilises the API internally. This is mildly inefficient as it means a json_encode/json_decode of the same data but it proves the API, keeps us honest and the performance overhead is not excessive.
To enable it, set the following parameter to true in your configuration file:
LOOKING_GLASS_ENABLED=true
This will activate the looking glass routes, add a link to the header and make the looking glass available under the base URL /lg.
Caching was implemented to provide a natural rate-limiting mechanism for security and to reduce the load on BIRD.
In environments where you already have security in place (e.g. authenticated users on IXP Manager), you may want to disable caching for those requests. You can whitelist a set of IP addresses for this purpose by:
cp skipcache_ips.php.dist skipcache_ips.phpand then editing skipcache_ips.php to add your (for example) IXP Manager server's IP address.
If you then tag ?use_cache=0 to API requests, the cache will be avoided. Note that the results from BIRD will still be added to the cache so standard requests will still benefit with the freshest data.
The API requires prefixes (e.g. 192.0.2.0/24) to be submitted as GET requests and so they need to be URL encoded. Some web servers such as Apache squash these. A sample Apache configuration for proxying Bird's Eye requests is:
<VirtualHost 192.0.2.17:80 [2001:db8::17]:80>
ServerName rc1-lan1-ipv4.example.com
ServerAlias rc1-lan1-ipv6.example.com
AllowEncodedSlashes NoDecode
ProxyPass / http://10.8.5.126/ nocanon
ProxyPassReverse / http://10.8.5.126/
</VirtualHost>
The code to work out what URL should be used in links can be seen here. In essence:
- if the server is configured for HTTPS, then
https://is forced.- otherwise if
$_SERVER['HTTP_X_FORWARDED_PROTO'](X-Forwarded-Protoin the HTTP request header) ishttps, thenhttps://is forced. - otherwise it is
http://
- otherwise if
- if
$_SERVER['HTTP_X_FORWARDED_HOST'](X-Forwarded-Hostin the HTTP request header) is set, then that host is used in the URL. Otherwise it is worked out by PHP in the normal manner. - if
$_SERVER['HTTP_X_URL'](X-Urlin the HTTP request header) is set, then that is appended to the hostname as a path / URL prefix.
For example, the live demos above (such as https://www.inex.ie/rc1-cork-ipv4/) is served via a Varnish proxy to an internal host with the following Varnish configuration:
backend rc1_cork_ipv4 {
.host = "rc1-ipv4.cork.inex.ie";
.port = "80";
}
sub vcl_recv {
...
# Birdseye Example Sites
if (req.url ~ "^/rc1-cork-ipv4/?" ) {
set req.backend_hint = rc1_cork_ipv4;
set req.http.x-url = "/rc1-cork-ipv4";
set req.http.x-birdseye = "rc1-ipv4";
set req.url = regsub( req.url, "^/rc1-cork-ipv4/?", "/");
return(pass);
}
}
When a request to Varnish for https://www.inex.ie/rc1-cork-ipv4/ hits the internal host, it sees a HTTP request with with following in PHP's $_SERVER array:
GET / HTTP/1.0
HTTP_HOST: www.inex.ie
HTTP_X_FORWARDED_PROTO: https
HTTP_X_URL: /rc1-cork-ipv4
HTTP_X_BIRDSEYE: rc1-ipv4
Using the above logic, the resolves to a base URL of: https://www.inex.ie/rc1-cork-ipv4.
There are two basic Nagios plugins in the the bin/ directory which can be downloaded to your Nagios server. As of October 2016, these were in production use at INEX monitoring 24 BIRD daemons and ~350 route server sessions.
The first monitors the basic status of the BIRD daemon:
# BIRD daemon stopped:
$ ./nagios-check-birdseye.php -a http://rc1q-cix-ipv4.inex.ie/api
CRITICAL: Could not query Bird daemon
$ echo $?
2
# BIRD daemon running:
$ ./nagios-check-birdseye.php -a http://rc1q-cix-ipv4.inex.ie/api
OK: Bird 1.5.0. Bird's Eye 1.0.0. Router ID 185.1.69.126. Uptime: 0 days. Last Reconfigure: 2016-10-26 11:22:35. 0 BGP sessions up of 0.
$ echo $?
0
The second will monitor BGP session states (all or a named protocol):
$ ./nagios-check-birdseye-bgp-sessions.php -a http://rc1-cix-ipv4.inex.ie/api
OK: 11/11 BGP sessions up.
$ echo $?
0
$ ./nagios-check-birdseye-bgp-sessions.php -a http://rc1-cix-ipv6.inex.ie/api
CRITICAL: Protocol pb_as42090_vli239_ipv6 - AS42090 down (152 days). 8/9 BGP sessions up.
$ echo $?
2
You can disable the Team Cymru ASN to ASN name resolution above (via DNS) by setting the -n option:
$ ./nagios-check-birdseye-bgp-sessions.php -a http://rc1-cix-ipv6.inex.ie/api -n
CRITICAL: Protocol pb_as42090_vli239_ipv6 - AS42090 down (152 days). 8/9 BGP sessions up.
And you can query a specific protocol with:
$ ./nagios-check-birdseye-bgp-sessions.php -a http://rc1-cix-ipv4.inex.ie/api -p pb_as43760_vli226_ipv4
OK: BGP session pb_as43760_vli226_ipv4 with AS43760 [INEX-RS Internet Neutral Exchange Association Limited, IE] up (197 days)
This also performs prefix limit checking and warning at 80% by default:
$ ./nagios-check-birdseye-bgp-sessions.php -a http://birdseye.dev/api
WARNING: BGP session pb_0182_as61337 with AS61337 [ECOM-AS, GB] up (161 days) but prefix limit at 46/50. BGP session pb_0160_as199256 with AS199256 [LTH-AS , IE] up (161 days) but prefix limit at 18/20. 69/73 BGP sessions up.
$ echo $?
1
Prefix limit checking can be disabled with a -l option.
Before version v1.2.0, Bird's Eye used the default timeformat settings in Bird.
From v1.2.0 onwards, Bird's Eye expects timestamps to be presented in ISO 8601 format. This needs to be configured in the BIRD configuration file using the following statements:
# Use ISO 8601 time formats:
timeformat base iso long;
timeformat log iso long;
timeformat protocol iso long;
timeformat route iso long;
This repository includes a Vagrant file with a
bootstrap script which,
on first run of vagrant up will:
- Boot an instance of Ubuntu 16.04 LTS.
- Update / upgrade all packages.
- Installs latest stable BIRD from CZ.NIC's Ubuntu PPA (at time of writing this is 1.6.3 with Large BGP Community support).
- Installs and configures Lighttpd (config).
- Spins up the lab IPv4 and IPv6 environments (see
start.shscripts indata/bird-lab/ipv[46]).
Bird's Eye should now be accessible on: http://localhost::8088/
To switch to the IPv6 lab, swap the BIRDC option in the .env file (the IPv6 version is commented out).
This application is open-sourced software licensed under the MIT license - see the license file.