Backport localization updates

src/Analyzers/MSTest.Analyzers/xlf/Resources.cs.xlf

@@ -37,10 +37,10 @@
 - it should be 'public' (or 'internal' if '[assembly: DiscoverInternals]' attribute is set)
 - it should not be 'static' (except if it contains only 'AssemblyInitialize' and/or 'AssemblyCleanup' methods)
 - it should not be generic.</source>
-        <target state="new">Test classes, classes marked with the '[TestClass]' attribute, should respect the following layout to be considered valid by MSTest:
-- it should be 'public' (or 'internal' if '[assembly: DiscoverInternals]' attribute is set)
-- it should not be 'static' (except if it contains only 'AssemblyInitialize' and/or 'AssemblyCleanup' methods)
-- it should not be generic.</target>
+        <target state="translated">Testovací třídy (třídy označené atributem [TestClass]) by měly respektovat následující rozložení, které MSTest považuje za platné:
+– musí být public (nebo internal, pokud je nastaven atribut [assembly: DiscoverInternals]),
+– nesmí být static (s výjimkou případů, kdy obsahuje pouze metody AssemblyInitialize nebo AssemblyCleanup),
+– nesmí být obecné.</target>
         <note />
       </trans-unit>
       <trans-unit id="TestClassShouldBeValidMessageFormat_NotGeneric">

src/Analyzers/MSTest.Analyzers/xlf/Resources.de.xlf

@@ -37,10 +37,10 @@
 - it should be 'public' (or 'internal' if '[assembly: DiscoverInternals]' attribute is set)
 - it should not be 'static' (except if it contains only 'AssemblyInitialize' and/or 'AssemblyCleanup' methods)
 - it should not be generic.</source>
-        <target state="new">Test classes, classes marked with the '[TestClass]' attribute, should respect the following layout to be considered valid by MSTest:
-- it should be 'public' (or 'internal' if '[assembly: DiscoverInternals]' attribute is set)
-- it should not be 'static' (except if it contains only 'AssemblyInitialize' and/or 'AssemblyCleanup' methods)
-- it should not be generic.</target>
+        <target state="translated">Testklassen (mit dem „[TestClass]“-Attribut gekennzeichnete Klassen) müssen das folgende Layout berücksichtigen, um von MSTest als gültig betrachtet zu werden:
+– Sie müssen auf „public“ festgelegt sein (oder auf „internal“, falls das „[assembly: DiscoverInternals]“-Attribut festgelegt ist).
+– Sie dürfen nicht auf „static“ festgelegt sein (außer wenn sie nur die Methoden „AssemblyInitialize“ und/oder „AssemblyCleanup“ enthalten)
+– Sie dürfen nicht generisch sein.</target>
         <note />
       </trans-unit>
       <trans-unit id="TestClassShouldBeValidMessageFormat_NotGeneric">

src/Analyzers/MSTest.Analyzers/xlf/Resources.es.xlf

@@ -37,10 +37,10 @@
 - it should be 'public' (or 'internal' if '[assembly: DiscoverInternals]' attribute is set)
 - it should not be 'static' (except if it contains only 'AssemblyInitialize' and/or 'AssemblyCleanup' methods)
 - it should not be generic.</source>
-        <target state="new">Test classes, classes marked with the '[TestClass]' attribute, should respect the following layout to be considered valid by MSTest:
-- it should be 'public' (or 'internal' if '[assembly: DiscoverInternals]' attribute is set)
-- it should not be 'static' (except if it contains only 'AssemblyInitialize' and/or 'AssemblyCleanup' methods)
-- it should not be generic.</target>
+        <target state="translated">Las clases de prueba, las clases marcadas con el atributo '[TestClass]', deben respetar el siguiente diseño para que MSTest lo considere válido:
+- debe ser 'public' (o 'internal' si se establece el atributo '[assembly: DiscoverInternals]')
+- no debe ser "static" (excepto si contiene solo los métodos "AssemblyInitialize" o "AssemblyCleanup")
+: no debe ser genérico.</target>
         <note />
       </trans-unit>
       <trans-unit id="TestClassShouldBeValidMessageFormat_NotGeneric">

src/Analyzers/MSTest.Analyzers/xlf/Resources.fr.xlf

@@ -37,10 +37,10 @@
 - it should be 'public' (or 'internal' if '[assembly: DiscoverInternals]' attribute is set)
 - it should not be 'static' (except if it contains only 'AssemblyInitialize' and/or 'AssemblyCleanup' methods)
 - it should not be generic.</source>
-        <target state="new">Test classes, classes marked with the '[TestClass]' attribute, should respect the following layout to be considered valid by MSTest:
-- it should be 'public' (or 'internal' if '[assembly: DiscoverInternals]' attribute is set)
-- it should not be 'static' (except if it contains only 'AssemblyInitialize' and/or 'AssemblyCleanup' methods)
-- it should not be generic.</target>
+        <target state="translated">Les classes de test, à savoir les classes marquées par l’attribut « [TestClass] », doivent respecter la disposition suivante pour être considérées comme valides par MSTest :
+– Elle doit être « publique » (ou « interne » si l’attribut « [assembly : DiscoverInternals] » est défini)
+– Elle ne doit pas être « statique » (sauf si elle ne contient que des méthodes « AssemblyInitialize » et/ou « AssemblyCleanup »)
+– Elle ne doit pas être générique.</target>
         <note />
       </trans-unit>
       <trans-unit id="TestClassShouldBeValidMessageFormat_NotGeneric">

src/Analyzers/MSTest.Analyzers/xlf/Resources.it.xlf

@@ -37,10 +37,10 @@
 - it should be 'public' (or 'internal' if '[assembly: DiscoverInternals]' attribute is set)
 - it should not be 'static' (except if it contains only 'AssemblyInitialize' and/or 'AssemblyCleanup' methods)
 - it should not be generic.</source>
-        <target state="new">Test classes, classes marked with the '[TestClass]' attribute, should respect the following layout to be considered valid by MSTest:
-- it should be 'public' (or 'internal' if '[assembly: DiscoverInternals]' attribute is set)
-- it should not be 'static' (except if it contains only 'AssemblyInitialize' and/or 'AssemblyCleanup' methods)
-- it should not be generic.</target>
+        <target state="translated">Le classi di test, classi contrassegnate con l'attributo '[TestClass]', dovrebbero rispettare il layout seguente per essere considerate valide da MSTest:
+- dovrebbe essere 'pubblica' (o 'interna' se l'attributo '[assembly: DiscoverInternals]' è impostato)
+- non dovrebbe essere 'statica' (a meno che contenga solo i metodi 'AssemblyInitialize' e/o 'AssemblyCleanup')
+- non dovrebbe essere generica.</target>
         <note />
       </trans-unit>
       <trans-unit id="TestClassShouldBeValidMessageFormat_NotGeneric">

src/Analyzers/MSTest.Analyzers/xlf/Resources.ja.xlf

@@ -37,10 +37,10 @@
 - it should be 'public' (or 'internal' if '[assembly: DiscoverInternals]' attribute is set)
 - it should not be 'static' (except if it contains only 'AssemblyInitialize' and/or 'AssemblyCleanup' methods)
 - it should not be generic.</source>
-        <target state="new">Test classes, classes marked with the '[TestClass]' attribute, should respect the following layout to be considered valid by MSTest:
-- it should be 'public' (or 'internal' if '[assembly: DiscoverInternals]' attribute is set)
-- it should not be 'static' (except if it contains only 'AssemblyInitialize' and/or 'AssemblyCleanup' methods)
-- it should not be generic.</target>
+        <target state="translated">テスト クラス ('[TestClass]' 属性でマークされたクラス) は、MSTest によって有効と見なされるように、次のレイアウトを考慮する必要があります:
+- 'public' である必要があります ('[assembly: DiscoverInternals]' 属性が設定されている場合は 'internal' である必要があります)
+- 'static' にすることはできません ('AssemblyInitialize' メソッドおよび/または 'AssemblyCleanup' メソッドのみが含まれる場合は除きます)
+- ジェネリックにすることはできません。</target>
         <note />
       </trans-unit>
       <trans-unit id="TestClassShouldBeValidMessageFormat_NotGeneric">

src/Analyzers/MSTest.Analyzers/xlf/Resources.ko.xlf

@@ -37,10 +37,10 @@
 - it should be 'public' (or 'internal' if '[assembly: DiscoverInternals]' attribute is set)
 - it should not be 'static' (except if it contains only 'AssemblyInitialize' and/or 'AssemblyCleanup' methods)
 - it should not be generic.</source>
-        <target state="new">Test classes, classes marked with the '[TestClass]' attribute, should respect the following layout to be considered valid by MSTest:
-- it should be 'public' (or 'internal' if '[assembly: DiscoverInternals]' attribute is set)
-- it should not be 'static' (except if it contains only 'AssemblyInitialize' and/or 'AssemblyCleanup' methods)
-- it should not be generic.</target>
+        <target state="translated">'[TestClass]' 특성으로 표시된 클래스인 테스트 클래스는 MSTest에서 유효하다고 간주하려면 다음 레이아웃을 준수해야 합니다.
+- 'public'(또는 '[assembly: DiscoverInternals]' 특성이 설정된 경우 'internal')이어야 합니다.
+- 'static'이 아니어야 합니다('AssemblyInitialize' 및/또는 'AssemblyCleanup' 메서드만 포함된 경우 제외).
+- 제네릭이 아니어야 합니다.</target>
         <note />
       </trans-unit>
       <trans-unit id="TestClassShouldBeValidMessageFormat_NotGeneric">

src/Analyzers/MSTest.Analyzers/xlf/Resources.pl.xlf

@@ -37,10 +37,10 @@
 - it should be 'public' (or 'internal' if '[assembly: DiscoverInternals]' attribute is set)
 - it should not be 'static' (except if it contains only 'AssemblyInitialize' and/or 'AssemblyCleanup' methods)
 - it should not be generic.</source>
-        <target state="new">Test classes, classes marked with the '[TestClass]' attribute, should respect the following layout to be considered valid by MSTest:
-- it should be 'public' (or 'internal' if '[assembly: DiscoverInternals]' attribute is set)
-- it should not be 'static' (except if it contains only 'AssemblyInitialize' and/or 'AssemblyCleanup' methods)
-- it should not be generic.</target>
+        <target state="translated">Klasy testowe, czyli klasy oznaczone atrybutem „[TestClass]”, powinny uwzględniać następujący układ, który jest uznawany za prawidłowy przez platformę MSTest:
+— powinna to być wartość „public” (lub „internal”, jeśli ustawiono atrybut „[assembly: DiscoverInternals]”)
+- nie powinna być „statyczna” (chyba że zawiera tylko metody „AssemblyInitialize” i/lub „AssemblyCleanup”)
+— nie powinna to być wartość ogólna.</target>
         <note />
       </trans-unit>
       <trans-unit id="TestClassShouldBeValidMessageFormat_NotGeneric">

src/Analyzers/MSTest.Analyzers/xlf/Resources.pt-BR.xlf

@@ -37,10 +37,10 @@
 - it should be 'public' (or 'internal' if '[assembly: DiscoverInternals]' attribute is set)
 - it should not be 'static' (except if it contains only 'AssemblyInitialize' and/or 'AssemblyCleanup' methods)
 - it should not be generic.</source>
-        <target state="new">Test classes, classes marked with the '[TestClass]' attribute, should respect the following layout to be considered valid by MSTest:
-- it should be 'public' (or 'internal' if '[assembly: DiscoverInternals]' attribute is set)
-- it should not be 'static' (except if it contains only 'AssemblyInitialize' and/or 'AssemblyCleanup' methods)
-- it should not be generic.</target>
+        <target state="translated">Classes de teste, classes marcadas com o atributo ''[TestClass]'', devem respeitar o layout a seguir para serem consideradas válidas pelo MSTest:
+- deve ser "público" (ou "interno" se o atributo "[assembly: DiscoverInternals]" estiver definido) 
+- não deve ser ''estático'' (exceto se contiver apenas os métodos ''AssemblyInitialize'' e/ou ''AssemblyCleanup'')
+- não deve ser genérico.</target>
         <note />
       </trans-unit>
       <trans-unit id="TestClassShouldBeValidMessageFormat_NotGeneric">