Oemer (End-to-end OMR)

This repository is no longer maintained. Please refer to BreezeWhite/oemer for newer updates.

End-to-end Optical Music Recognition system build on deep learning models and machine learning techniques. Default to use Onnxruntime for model inference. If you want to use tensorflow for the inference, run export INFERENCE_WITH_TF=true and make sure there is TF installed.

tabi.mp4

Quick Start

git clone https://github.com/meteo-team/oemer
cd oemer
python setup.py install
oemer --help

Or download the built wheel file from the release and install

# Go to the release page and download the .whl file from
# the assets.

# Replace the <version> to the correct version.
pip install Oemer-<version>-py3-none-any.whl

Packaging

python setup.py bdist_wheel

# Install from the wheel file
pip install dist/Oemer-<version>-py3-none-any.whl

Change log level

# Available options: debug, info, warn, warning, error, crtical
export LOG_LEVEL=debug

Technical Details

This section describes the detail techniques for solving the OMR problem. The overall flow can also be found in oemer/ete.py, which is also the entrypoint for oemer command.

Disclaimer: All descriptions below are simplfied compare to the actual implementation. Only core concepts are covered.

Model Prediction

Oemer first predicts different informations with two image semantic segmentation models: one for predicting stafflines and all other symbols; and second model for more detailed symbol informations, including noteheads, clefs, stems, rests, sharp, flat, natural.

Model one for predicting stafflines (red) and all other symbols (blue).

Model two for predicting noteheads (green), clefs/sharp/flat/natural (pink), and stems/rests (blue).

Dewarping

Before proceed to recognizing the symbols, one may need to deskew the photo first since the later process assumes the stafflines are all horizontally aligned and the position of noteheads, rests and all other things are all depends on this assumption.

For the dewarping, there can be summarized to six steps as shown in the below figure.

Steps to dewarp the curved image.

The dewarping map will be apply to all the predicted informations by the two models.

Staffline Extraction

After dewarping, stafflines will be parsed. This step plays the most important role, as this is the foundation to all the later steps. Ths most important information is unit_size, which is the interval between stafflines. It's obvious that all the sizes, distance-related information in a music score all relate to the interval, or gap, of stafflines.

The stafflines are processed part-by-part horizontally, as shown below:

For each part, the algorithm finds the lines by accumulating positive pixels by rows. After summarizing the counts for each row, we get the following statistics:

The algorithm then picks all the peaks and applies additional rules to filter out false positive peaks. The final picked true positive peaks (stafflines) are marked with red dots.

Another important information is tracks and groups. For a conventional piano score, there are two tracks, for left and right hand, respectively, and forms a group. For this information, the algorithm foresees the symbols predictions and parse the barlines to infer possible track numbers.

After extraction, the informations are stored into list of Staff instances. Example Staff instance representation is as follow:

# Example instance of oemer.staffline_extraction.Staff
Staff(
    Lines: 5  # Contains 5 stafflines.
    Center: 1835.3095048449181  # Y-center of this block of staff.
    Upper bound: 1806  # Upper bound of this block of staff (originated from left-top corner).
    Lower bound: 1865  # Lower bound of this block of staff (originated from left-top corner).
    Unit size: 14.282656749749265  # Average interval of stafflines.
    Track: 1  # For two-handed piano score, there are two tracks.
    Group: 3  # For two-handed piano score, two tracks are grouped into one.
    Is interpolation: False  # Is this block of staff information interpolated.
    Slope: -0.0005315575840202954  # Estimated slope
)

Notehead Extraction

The next step is to extract noteheads, which is the second important information to be parsed.

Steps to extract noteheads are breifly illustrated in the following figure:

One of the output channel of the second model predicts the noteheads map, as can be seen in the top-middle image. The algorithm then pre-process it with morphing to refine the information. Worth noticing here is that we force the model to predict 'hollow' notes to be solid noteheads, which thus the information won't be eliminated by the morphing.

Next, the algorithm detects the bounding boxes of each noteheads. Since the noteheads could overlap with each other, the initial detection could thus contain more than one noteheads. To deal with such situation, the algorithm integrate the information unit_size to approximate how many noteheads are actually there, in both horizontal and vertical direction. The result is shown in the bottom-left figure.

As we force the model to predict both half and whole notes to be solid noteheads, we need to setup rules to decide whether they are actually half or whole notes. This could be done by simply compare the region coverage rate between the prediction and the original image. The result is shown in the bottom-middle figure.

Finally, the last thing to be parsed is the position of noteheads on stafflines. The origin starts from the bottom line space with (D4 for treble clef, and F3 for bass clef) index 0. There could be negative numbers as well. In this step, noteheads are also being assigned with track and group number, indicating which stave they belong to. The bottom-right figure shows the result.

# Example instance of oemer.notehead_extraction.NoteHead
Notehead 12 (  # The number refers to note ID
    Points: 123  # Number of pixels for this notehead.
    Bounding box: [649 402 669 419]
    Stem up: None  # Direction of the stem, will be infered in later steps.
    Track: 1
    Group: 0
    Pitch: None  # Actual pitch in MIDI number, will be infered in later steps.
    Dot: False  # Whether there is dot for this note.
    Label: NoteType.HALF_OR_WHOLE  # Initial guess of the rhythm type.
    Staff line pos: 4  # Position on stafflines. Counting from D4 for treble clef.
    Is valid: True  # Flag for marking if the note is valid.
    Note group ID: None  # Note group ID this note belong to. Will be infered in later steps.
    Sharp/Flat/Natural: None  # Accidental type of this note. Will be infered in later steps.
)

Note Group Extraction

This step groups individual noteheads into chords that should be played at the same time.

A quick snippet of the final result is shown below:

The first step is to group the noteheads according mainly to their distance vertically, and then the overlapping and a small-allowed distance horizontally.

After the initial grouping, the next is to parse the stem direction and further use this information to refine the grouping results. Since there could be noteheads that are vertically very close, but have different directions of stems. This indicates that there are two different melody lines happening at the same time. This is specifically being considered in oemer and taken care of over all the system.

# Example instance of oemer.note_group_extraction.NoteGroup
Note Group No. 0 / Group: 0 / Track: 0 :(
    Note count: 1
    Stem up: True
    Has stem: True
)

Symbol Extraction

After noteheads being extracted, there remains other important musical annotations need to be parsed, such as keys, accidentals, clefs, and rests. As mentioned before, the second model predicts different pairs of symbols in the same channel for the ease of training. Additional separation of the information is thus required.

Clefs & SFN

For the clefs/sfn (short for sharp, flat, natural) pair, the initial intention for grouping them together, is that it's easier to distinguish the difference through their size and the region coverage rate (tp_pixels / bounding_box_size). This is exactly what the algorithm being implemented to recognize them. After the clef/sfn classification, Further recognition leverages SVM models to classify them into the correct symbol types (e.g. gclef, sharp, flat).

# Example instance of oemer.symbol_extraction.Clef
Clef: F_CLEF / Track: 1 / Group: 1

# Example instance of oemer.symbol_extraction.Sfn
SFN: NATURAL / Note ID: 186 / Is key: False / Track: 0 / Group: 0

Barlines

Extracts barlines using both models' output. The algorithm first uses the second model's prediction, the channel contains rests and 'stems' (which should be 'straight lines' actually). Since the previous step while extracting note groups has already used the 'stem' information, so the rest part of unused 'stems' should be barlines. However, due to some bugs of the training dataset, the model always predicts barlines, that should be longer than stems, into the same length of stems. It is thus the algorithm needs the first model's output to extract the 'actual' barlines with real lengths. By overlapping the two different information, the algorithm can easily filter out most of non-barline objects in the prediction map. Further extraction applies additional rules to estimate barlines. The result can be seen as follow:

And the representation of a barline instance:

# Example instance of oemer.symbol_extraction.Barline
Barline / Group: 3

There is no track information of barline since one barline is supposed to occupy multiple tracks.

Rests

Having used all the 'stems' information in the output channel during the last few steps, the rest symbols should be 'rests'. List of rules are also applied to filter the symbols. The recognition of the rest types are done by using trained SVM model. As a result, above process outputs the following result:

Representation of the rest instance:

# Example instance of oemer.symbol_extraction.Rest
Rest: EIGHTH / Has dot: None / Track: 1 / Group: 1

Rhythm Extraction

This is probably the most time consuming part except for the model inference. There are two things that effect the rhythm: dot and beams/flags. The later two (beams, flags) are considered the same thing in the extraction. In this step, model one's prediction is used, including both channels (stafflines, symbols). This process updates attributes in-place.

The algorithm first parse the information of dot for each note. The symbols map is first subtracted by other prediction maps (e.g. stems, noteheads, clefs, etc.), and then use the remaining part for scanning the dots. Since the region of a dot is small, the algorithm morphs the map first. After amplifying the dot information, the algorithm scans a small region nearby every detected noteheads, calculate the ratio of positive samples to the region, and determine whether there is a dot by a given certain threshold.

Here comes the most difficult and critical part amongst all steps, since rhythm hugely influence the listening experience. Few steps are included to extract beams/flags:

• Initial parsing
• Check overlapping with noteheads and stems
• Correlate beams/flags to note groups
• Assign rhythm types to note groups and update the note grouping when neccessary.

Brief summary of these steps are illustrated as below:

The first step is, as mentioned before, to distill beams/flags from all the symbols predicted by model one. By subtracting with the second model's output, and apply some simple filtering rules, we get the top-left figure.

Next, the algorithm picks the regions that overlap with known noteheads and stems. We also get an initial relation between note groups and beams/flags. Both information are kept for later usage. As a result, the algorithm generates the top-right figure.

The third step is to refine the relation between note groups and beams. Since there could be stem of one note group that doesn't overlap with the beam above/below it, and thus not being included in the same bounding box. Here, bounding box includes both note group and beams/flags. This can be adjusted by further scans the region under the bounding box, check if there contains unknown note groups, and update the relation. Figure is shown in bottom-left.

Finally, the algorithm has all neccessary information to conclude the rhythm types for each note group now. The algorithm scans a small region for counting how many beams/flags there are. The region is bounded by the center of the x-axis of the note group, with extention to both left and right side; the y-axis by the bounding box and the boundary of the note in the note group that closest to the beams (depending on the direction of the stem). Figure on the bottom-right shows the region of bounding boxes (green), the scanning range (blue), and the final number of beams/flags detected by the algorithm. Numeber of rules are also applied to refine the counting result.

In the last step, there is another important mission is to update the note grouping, which means further check the legitmacy of each note group, and separate them into upper and lower part if neccessary. Since oemer takes multi-melody line into consideration, it is not possible until we collect all the fundamental information to finally determine there is indeed multiple melody lines in the note group. That is why in the last step here, the algorithm checks the grouping again.

Build MusicXML

The process of building MusicXML document follows the event-based (objective used in oemer is 'action') mechanism, which essentially means there are different event types, and each has their own attributes and differently behaviors when being triggered. The process goes to construct a sequence of events first, and trigger them one-by-one later. This eventually yields a series of XML strings. A global context is shared across each events, which plays a key role for holding the music context while decoding.

A brief summary of steps are listed:

1. Sort symbols first by groups, then x-axis position.
2. Initialize the first measure with clef and key information.
3. Determine the alignment between notes/rests in different tracks.
4. Adjust the rhythm of notes/rests or adding rests to make sure the aligned symbols are at the same beat position.
5. Decode the sequence and generate the MusicXML document.

Sort

Sort all the instances previously generated by their groups and x-axis, then cluster them into measures. It's obvious this step is to mitigate how human interpret a music sheet. The status of accidentals are reset for each measure, rhythm types, chord prgression, etc.

Initialize

The initial state of clef type for each track and the key type. This step includes an important algorithm: key finding. The algorithm can be split down into few steps:

1. Decide if the current measure contains key.

   Check the first few occurance of symbols that are instance of Sfn. If there isn't any, return key type of C-major. If yes, then go to the next step.

2. Define the scan range.

   If the current measure is at the beginning of that row (track), then the first track_nums of symbols types should be Clef, then comes the key. Then the end of the scanning, since there are at most 6 sharps/flats of the key (ignoring some special cases that the key changes after the double barlines, which may contain naturals), this offset plus 4 as the tolerance are added to the beginning index.

3. Count occurance

   Count number of occurance of predicted Sfn types. Store this information for later process.

4. Check the validity

   Checks if all tracks have the same label (i.e. all flats, all sharps). If not, count the most occurance of Sfn types. Use this as the label type (i.e. sharp or flat). There are more advanced rules being applied in this process. Please check the source code for the details.

5. Return key type

   Count the occurance of Sfn instances, use the sharp/flat information, and combine the two to determine the final key type.

Symbol Alignment

Beat Adjustment

Decode