is31fl3741: driver naming cleanups (qmk#21929)

drivers/led/issi/is31fl3741.c

@@ -17,12 +17,10 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "wait.h"
-
 #include "is31fl3741.h"
 #include <string.h>
 #include "i2c_master.h"
-#include "progmem.h"
+#include "wait.h"
 
 // This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)
@@ -34,50 +32,50 @@
 // ADDR1 represents A1:A0 of the 7-bit address.
 // ADDR2 represents A3:A2 of the 7-bit address.
 // The result is: 0b101(ADDR2)(ADDR1)
-#define ISSI_ADDR_DEFAULT 0x60
-
-#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
-#define ISSI_INTERRUPTMASKREGISTER 0xF0
-#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
-#define ISSI_IDREGISTER 0xFC
-
-#define ISSI_PAGE_PWM0 0x00      // PG0
-#define ISSI_PAGE_PWM1 0x01      // PG1
-#define ISSI_PAGE_SCALING_0 0x02 // PG2
-#define ISSI_PAGE_SCALING_1 0x03 // PG3
-#define ISSI_PAGE_FUNCTION 0x04  // PG4
-
-#define ISSI_REG_CONFIGURATION 0x00 // PG4
-#define ISSI_REG_GLOBALCURRENT 0x01 // PG4
-#define ISSI_REG_PULLDOWNUP 0x02    // PG4
-#define ISSI_REG_RESET 0x3F         // PG4
-
-#ifndef ISSI_TIMEOUT
-#    define ISSI_TIMEOUT 100
+#define IS31FL3741_I2C_ADDRESS_DEFAULT 0x60
+
+#define IS31FL3741_COMMANDREGISTER 0xFD
+#define IS31FL3741_COMMANDREGISTER_WRITELOCK 0xFE
+#define IS31FL3741_INTERRUPTMASKREGISTER 0xF0
+#define IS31FL3741_INTERRUPTSTATUSREGISTER 0xF1
+#define IS31FL3741_IDREGISTER 0xFC
+
+#define IS31FL3741_PAGE_PWM0 0x00      // PG0
+#define IS31FL3741_PAGE_PWM1 0x01      // PG1
+#define IS31FL3741_PAGE_SCALING_0 0x02 // PG2
+#define IS31FL3741_PAGE_SCALING_1 0x03 // PG3
+#define IS31FL3741_PAGE_FUNCTION 0x04  // PG4
+
+#define IS31FL3741_REG_CONFIGURATION 0x00 // PG4
+#define IS31FL3741_REG_GLOBALCURRENT 0x01 // PG4
+#define IS31FL3741_REG_PULLDOWNUP 0x02    // PG4
+#define IS31FL3741_REG_RESET 0x3F         // PG4
+
+#ifndef IS31FL3741_I2C_TIMEOUT
+#    define IS31FL3741_I2C_TIMEOUT 100
 #endif
 
-#ifndef ISSI_PERSISTENCE
-#    define ISSI_PERSISTENCE 0
+#ifndef IS31FL3741_I2C_PERSISTENCE
+#    define IS31FL3741_I2C_PERSISTENCE 0
 #endif
 
-#ifndef ISSI_CONFIGURATION
-#    define ISSI_CONFIGURATION 0x01
+#ifndef IS31FL3741_CONFIGURATION
+#    define IS31FL3741_CONFIGURATION 0x01
 #endif
 
-#ifndef ISSI_SWPULLUP
-#    define ISSI_SWPULLUP PUR_32KR
+#ifndef IS31FL3741_SWPULLUP
+#    define IS31FL3741_SWPULLUP IS31FL3741_PUR_32KR
 #endif
 
-#ifndef ISSI_CSPULLUP
-#    define ISSI_CSPULLUP PUR_32KR
+#ifndef IS31FL3741_CSPULLUP
+#    define IS31FL3741_CSPULLUP IS31FL3741_PUR_32KR
 #endif
 
-#ifndef ISSI_GLOBALCURRENT
-#    define ISSI_GLOBALCURRENT 0xFF
+#ifndef IS31FL3741_GLOBALCURRENT
+#    define IS31FL3741_GLOBALCURRENT 0xFF
 #endif
 
-#define ISSI_MAX_LEDS 351
+#define IS31FL3741_MAX_LEDS 351
 
 // Transfer buffer for TWITransmitData()
 uint8_t g_twi_transfer_buffer[20] = {0xFF};
@@ -88,22 +86,22 @@ uint8_t g_twi_transfer_buffer[20] = {0xFF};
 // We could optimize this and take out the unused registers from these
 // buffers and the transfers in is31fl3741_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
-uint8_t g_pwm_buffer[DRIVER_COUNT][ISSI_MAX_LEDS];
-bool    g_pwm_buffer_update_required[DRIVER_COUNT]        = {false};
-bool    g_scaling_registers_update_required[DRIVER_COUNT] = {false};
+uint8_t g_pwm_buffer[IS31FL3741_DRIVER_COUNT][IS31FL3741_MAX_LEDS];
+bool    g_pwm_buffer_update_required[IS31FL3741_DRIVER_COUNT]        = {false};
+bool    g_scaling_registers_update_required[IS31FL3741_DRIVER_COUNT] = {false};
 
-uint8_t g_scaling_registers[DRIVER_COUNT][ISSI_MAX_LEDS];
+uint8_t g_scaling_registers[IS31FL3741_DRIVER_COUNT][IS31FL3741_MAX_LEDS];
 
 void is31fl3741_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
 
-#if ISSI_PERSISTENCE > 0
-    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
+#if IS31FL3741_I2C_PERSISTENCE > 0
+    for (uint8_t i = 0; i < IS31FL3741_I2C_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3741_I2C_TIMEOUT) == 0) break;
     }
 #else
-    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3741_I2C_TIMEOUT);
 #endif
 }
 
@@ -113,21 +111,21 @@ bool is31fl3741_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     for (int i = 0; i < 342; i += 18) {
         if (i == 180) {
             // unlock the command register and select PG1
-            is31fl3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-            is31fl3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM1);
+            is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
+            is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_PWM1);
         }
 
         g_twi_transfer_buffer[0] = i % 180;
         memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 18);
 
-#if ISSI_PERSISTENCE > 0
-        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 19, ISSI_TIMEOUT) != 0) {
+#if IS31FL3741_I2C_PERSISTENCE > 0
+        for (uint8_t i = 0; i < IS31FL3741_I2C_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 19, IS31FL3741_I2C_TIMEOUT) != 0) {
                 return false;
             }
         }
 #else
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 19, ISSI_TIMEOUT) != 0) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 19, IS31FL3741_I2C_TIMEOUT) != 0) {
             return false;
         }
 #endif
@@ -137,14 +135,14 @@ bool is31fl3741_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     g_twi_transfer_buffer[0] = 162;
     memcpy(g_twi_transfer_buffer + 1, pwm_buffer + 342, 9);
 
-#if ISSI_PERSISTENCE > 0
-    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 10, ISSI_TIMEOUT) != 0) {
+#if IS31FL3741_I2C_PERSISTENCE > 0
+    for (uint8_t i = 0; i < IS31FL3741_I2C_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 10, IS31FL3741_I2C_TIMEOUT) != 0) {
             return false;
         }
     }
 #else
-    if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 10, ISSI_TIMEOUT) != 0) {
+    if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 10, IS31FL3741_I2C_TIMEOUT) != 0) {
         return false;
     }
 #endif
@@ -160,18 +158,18 @@ void is31fl3741_init(uint8_t addr) {
     // Unlock the command register.
 
     // Unlock the command register.
-    is31fl3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+    is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG4
-    is31fl3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
+    is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_FUNCTION);
 
     // Set to Normal operation
-    is31fl3741_write_register(addr, ISSI_REG_CONFIGURATION, ISSI_CONFIGURATION);
+    is31fl3741_write_register(addr, IS31FL3741_REG_CONFIGURATION, IS31FL3741_CONFIGURATION);
 
     // Set Golbal Current Control Register
-    is31fl3741_write_register(addr, ISSI_REG_GLOBALCURRENT, ISSI_GLOBALCURRENT);
+    is31fl3741_write_register(addr, IS31FL3741_REG_GLOBALCURRENT, IS31FL3741_GLOBALCURRENT);
     // Set Pull up & Down for SWx CSy
-    is31fl3741_write_register(addr, ISSI_REG_PULLDOWNUP, ((ISSI_CSPULLUP << 4) | ISSI_SWPULLUP));
+    is31fl3741_write_register(addr, IS31FL3741_REG_PULLDOWNUP, ((IS31FL3741_CSPULLUP << 4) | IS31FL3741_SWPULLUP));
 
     // is31fl3741_update_led_scaling_registers(addr, 0xFF, 0xFF, 0xFF);
 
@@ -228,8 +226,8 @@ void is31fl3741_set_led_control_register(uint8_t index, bool red, bool green, bo
 void is31fl3741_update_pwm_buffers(uint8_t addr, uint8_t index) {
     if (g_pwm_buffer_update_required[index]) {
         // unlock the command register and select PG2
-        is31fl3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-        is31fl3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM0);
+        is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
+        is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_PWM0);
 
         is31fl3741_write_pwm_buffer(addr, g_pwm_buffer[index]);
     }
@@ -248,17 +246,17 @@ void is31fl3741_set_pwm_buffer(const is31_led *pled, uint8_t red, uint8_t green,
 void is31fl3741_update_led_control_registers(uint8_t addr, uint8_t index) {
     if (g_scaling_registers_update_required[index]) {
         // unlock the command register and select PG2
-        is31fl3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-        is31fl3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_SCALING_0);
+        is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
+        is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_SCALING_0);
 
         // CS1_SW1 to CS30_SW6 are on PG2
         for (int i = CS1_SW1; i <= CS30_SW6; ++i) {
             is31fl3741_write_register(addr, i, g_scaling_registers[index][i]);
         }
 
         // unlock the command register and select PG3
-        is31fl3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-        is31fl3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_SCALING_1);
+        is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
+        is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_SCALING_1);
 
         // CS1_SW7 to CS39_SW9 are on PG3
         for (int i = CS1_SW7; i <= CS39_SW9; ++i) {

drivers/led/issi/is31fl3741.h

@@ -23,6 +23,39 @@
 #include <stdbool.h>
 #include "progmem.h"
 
+// ======== DEPRECATED DEFINES - DO NOT USE ========
+#ifdef DRIVER_COUNT
+#    define IS31FL3741_DRIVER_COUNT DRIVER_COUNT
+#endif
+#ifdef ISSI_TIMEOUT
+#    define IS31FL3741_I2C_TIMEOUT ISSI_TIMEOUT
+#endif
+#ifdef ISSI_PERSISTENCE
+#    define IS31FL3741_I2C_PERSISTENCE ISSI_PERSISTENCE
+#endif
+#ifdef ISSI_CONFIGURATION
+#    define IS31FL3741_CONFIGURATION ISSI_CONFIGURATION
+#endif
+#ifdef ISSI_SWPULLUP
+#    define IS31FL3741_SWPULLUP ISSI_SWPULLUP
+#endif
+#ifdef ISSI_CSPULLUP
+#    define IS31FL3741_CSPULLUP ISSI_CSPULLUP
+#endif
+#ifdef ISSI_GLOBALCURRENT
+#    define IS31FL3741_GLOBALCURRENT ISSI_GLOBALCURRENT
+#endif
+
+#define PUR_0R IS31FL3741_PUR_0R
+#define PUR_05KR IS31FL3741_PUR_05KR
+#define PUR_1KR IS31FL3741_PUR_1KR
+#define PUR_2KR IS31FL3741_PUR_2KR
+#define PUR_4KR IS31FL3741_PUR_4KR
+#define PUR_8KR IS31FL3741_PUR_8KR
+#define PUR_16KR IS31FL3741_PUR_16KR
+#define PUR_32KR IS31FL3741_PUR_32KR
+// ========
+
 typedef struct is31_led {
     uint32_t driver : 2;
     uint32_t r : 10;
@@ -51,14 +84,14 @@ void is31fl3741_set_scaling_registers(const is31_led *pled, uint8_t red, uint8_t
 
 void is31fl3741_set_pwm_buffer(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue);
 
-#define PUR_0R 0x00   // No PUR resistor
-#define PUR_05KR 0x01 // 0.5k Ohm resistor
-#define PUR_1KR 0x02  // 1.0k Ohm resistor
-#define PUR_2KR 0x03  // 2.0k Ohm resistor
-#define PUR_4KR 0x04  // 4.0k Ohm resistor
-#define PUR_8KR 0x05  // 8.0k Ohm resistor
-#define PUR_16KR 0x06 // 16k Ohm resistor
-#define PUR_32KR 0x07 // 32k Ohm resistor
+#define IS31FL3741_PUR_0R 0x00   // No PUR resistor
+#define IS31FL3741_PUR_05KR 0x01 // 0.5k Ohm resistor
+#define IS31FL3741_PUR_1KR 0x02  // 1.0k Ohm resistor
+#define IS31FL3741_PUR_2KR 0x03  // 2.0k Ohm resistor
+#define IS31FL3741_PUR_4KR 0x04  // 4.0k Ohm resistor
+#define IS31FL3741_PUR_8KR 0x05  // 8.0k Ohm resistor
+#define IS31FL3741_PUR_16KR 0x06 // 16k Ohm resistor
+#define IS31FL3741_PUR_32KR 0x07 // 32k Ohm resistor
 
 #define CS1_SW1 0x00
 #define CS2_SW1 0x01

keyboards/acheron/apollo/87h/gamma/config.h

@@ -27,7 +27,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // RGB Matrix defines
 #define DRIVER_ADDR_1 0b0110000
 
-#define DRIVER_COUNT 1
+#define IS31FL3741_DRIVER_COUNT 1
 #define DRIVER_1_LED_TOTAL 87
 #define RGB_MATRIX_LED_COUNT DRIVER_1_LED_TOTAL
 #define ISSI_DRIVER_TOTAL RGB_MATRIX_LED_COUNT

keyboards/dztech/dz65rgb/v3/config.h

@@ -73,7 +73,7 @@
 
 #    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #    define DRIVER_ADDR_1 0b0110000
-#    define DRIVER_COUNT 1
+#    define IS31FL3741_DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 68
 #    define DRIVER_INDICATOR_LED_TOTAL 0
 #endif

keyboards/ilumkb/simpler61/config.h

@@ -22,7 +22,7 @@
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26
 #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #define DRIVER_ADDR_1 0b0110000
-#define DRIVER_COUNT 1
+#define IS31FL3741_DRIVER_COUNT 1
 #define DRIVER_1_LED_TOTAL 61
 #define RGB_MATRIX_LED_COUNT DRIVER_1_LED_TOTAL
 #define DRIVER_INDICATOR_LED_TOTAL 0

keyboards/ilumkb/simpler64/config.h

@@ -22,7 +22,7 @@
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26
 #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #define DRIVER_ADDR_1 0b0110000
-#define DRIVER_COUNT 1
+#define IS31FL3741_DRIVER_COUNT 1
 #define DRIVER_1_LED_TOTAL 64
 #define RGB_MATRIX_LED_COUNT DRIVER_1_LED_TOTAL
 #define DRIVER_INDICATOR_LED_TOTAL 0

keyboards/kbdcraft/adam64/config.h

@@ -23,7 +23,7 @@
 #define I2C1_CLOCK_SPEED	400000
 #define I2C1_DUTY_CYCLE	FAST_DUTY_CYCLE_16_9
 
-#define DRIVER_COUNT 1
+#define IS31FL3741_DRIVER_COUNT 1
 #define DRIVER_ADDR_1 0b0110000
 #define RGB_MATRIX_LED_COUNT 64
 

keyboards/kbdfans/bella/rgb/config.h

@@ -72,7 +72,7 @@
 //#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
 #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #define DRIVER_ADDR_1 0b0110000
-#define DRIVER_COUNT 1
+#define IS31FL3741_DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 108
 #define DRIVER_INDICATOR_LED_TOTAL 0
 #endif

keyboards/kbdfans/bella/rgb_iso/config.h

@@ -72,7 +72,7 @@
 //#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
 #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #define DRIVER_ADDR_1 0b0110000
-#define DRIVER_COUNT 1
+#define IS31FL3741_DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 109
 #define DRIVER_INDICATOR_LED_TOTAL 0
 #endif

keyboards/kbdfans/boop65/rgb/config.h

@@ -27,7 +27,7 @@
 #    define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set
 #    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #    define DRIVER_ADDR_1 0b0110000
-#    define DRIVER_COUNT 1
+#    define IS31FL3741_DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 83
 #    define DRIVER_INDICATOR_LED_TOTAL 0
 #define ENABLE_RGB_MATRIX_ALPHAS_MODS

keyboards/kbdfans/kbd67/mkiirgb/v3/config.h

@@ -73,7 +73,7 @@
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26
 #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #define DRIVER_ADDR_1 0b0110000
-#define DRIVER_COUNT 1
+#define IS31FL3741_DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 67
 #define DRIVER_INDICATOR_LED_TOTAL 0
 #endif

keyboards/kprepublic/bm68hsrgb/rev2/config.h

@@ -20,7 +20,7 @@
 
 #define DRIVER_ADDR_1 0b0110000
 
-#define DRIVER_COUNT 1
+#define IS31FL3741_DRIVER_COUNT 1
 #define DRIVER_1_LED_TOTAL 68
 #define RGB_MATRIX_LED_COUNT DRIVER_1_LED_TOTAL
 #define DRIVER_INDICATOR_LED_TOTAL 0

keyboards/kprepublic/bm80v2/config.h

@@ -54,7 +54,7 @@
 #define ENABLE_RGB_MATRIX_SOLID_SPLASH
 #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 #define DRIVER_ADDR_1 0b0110000
-#define DRIVER_COUNT 1
+#define IS31FL3741_DRIVER_COUNT 1
 #define DRIVER_1_LED_TOTAL 87
 #define RGB_MATRIX_LED_COUNT DRIVER_1_LED_TOTAL