(
                         .-'''-..' \ 
               _______ .'       -   \
             <<<<<<<< );__   ,,,_)   \ 
                <<<<<<<<< ) ;C  /     \ 
                  <<<<<< (.-'-.  )====_)_=======> wpa_supplicant-cupid 
                    <<<<< \    '''''''   )           && hostapd-cupid
                    ;  <<<     .......__/
               .-'''         (         )
            .-'              ;.       /
           /  .-'     .     =  .     /
       _-''\_/         '. .'    .   /
    .-'  )  ;\          '''.     . /
   ;   .''''  `.       '    ;     (
   O -'        .'''       .'
             .'   .-'''''`
             'o-'



## Cupid 0.1

## Author: Luis Grangeia 
## [email protected]
## twitter.com/lgrangeia

# INTRODUCTION

Cupid is a pair of patches for hostapd-2.1 and wpa_supplicant-2.1 to exploit 
heartbleed on Wireless networks that use EAP Authentication methods based on 
TLS (specifically OpenSSL)

Please see presentation slides for a simple introduction to cupid:

http://www.slideshare.net/lgrangeia


# COMPILATION

Get wpa_supplicant-2.1 and/or hostapd-2.1, apply the respective patch and 
compile. I don't recommend doing a "make install" as you'll be replacing
your systems binaries with non-functional copies (functional only for exploiting
heartbleed).

# USAGE

Both patches come with a "heartbleed.conf" file that can be used to tweak 
behaviour. It must be present and placed on the same directory you're running 
the binary. Refer to the file for details.

--> wpa_supplicant:

Use the included test_wpasupplicant.conf and change the ssid to the network 
you're wanting to test heartbleed for.

Fire up wireshark or tcpdump on the interface to check for TLS heartbeat 
requests/responses. I usually do:

# airmon-ng start wlan0

and then monitor the whole thing on the mon0 interface (use filter 'EAP || SSL'
for a better picture).

fire up wpa_supplicant:

./wpa_supplicant -i wlan0 -dd -c ~/testconfs/test_wpasupplicant.conf

Look at the output of wireshark to see if the network you're attacking is 
vulnerable.

--> hostapd

Use the included test_hostapd.conf. You may have to set up certificates and an 
empty eap_user file. I've included these for reference as well.

Fire up wireshark as described above.

Note that you need a wireless adapter supporting host AP mode.

fire up hostapd:

./hostapd -d test_hostapd.conf

Then try to connect to the "bleedingheart" network with your mobile device or
laptop, and it will try to heartbleed it. You can put any login/password 
combination.

To see if the patch works just install a vulnerable OpenSSL version and try to
exploit your local copy of wpa_supplicant or a fresh install of hostapd.

### FUTURE WORK
 
Please let me know if you find vulnerable devices and give me their version and
if possible a packet dump of the actual attack.

TODO:
	- Code is still very incomplete, just a PoC
	- Does not decrypt the heartbeat response if encrypted (not the case if
	pre-handshake)
	- Should output the heartbeat responses to a file
	- Test more devices/networks!