Merge pull request #1 from qmk/master

UPDATE

.github/PULL_REQUEST_TEMPLATE.md

@@ -26,7 +26,8 @@
 
 <!--- Go over all the following points, and put an `x` in all the boxes that apply. -->
 <!--- If you're unsure about any of these, don't hesitate to ask. We're here to help! -->
-- [ ] My code follows the code style of this project.
+- [ ] My code follows the code style of this project: [**C**](https://docs.qmk.fm/#/coding_conventions_c), [**Python**](https://docs.qmk.fm/#/coding_conventions_python)
+- [ ] I have read the [**PR Checklist** document](https://docs.qmk.fm/#/pr_checklist) and have made the appropriate changes.
 - [ ] My change requires a change to the documentation.
 - [ ] I have updated the documentation accordingly.
 - [ ] I have read the [**CONTRIBUTING** document](https://docs.qmk.fm/#/contributing).

.gitignore

@@ -73,3 +73,6 @@ __pycache__
 
 # prerequisites for updating ChibiOS
 /util/fmpp*
+
+# Allow to exist but don't include it in the repo
+user_song_list.h

bootloader.mk

@@ -27,6 +27,7 @@
 # qmk-dfu        QMK DFU (LUFA + blinkenlight)
 # bootloadHID    HIDBootFlash compatible (ATmega32A)
 # USBasp         USBaspLoader (ATmega328P)
+# kiibohd        Input:Club Kiibohd bootloader (only used on their boards)
 #
 # BOOTLOADER_SIZE can still be defined manually, but it's recommended
 # you add any possible configuration to this list
@@ -89,6 +90,18 @@ ifeq ($(strip $(BOOTLOADER)), lufa-ms)
     BOOTLOADER_SIZE = 6144
     FIRMWARE_FORMAT = bin
 endif
+ifeq ($(strip $(BOOTLOADER)), kiibohd)
+    OPT_DEFS += -DBOOTLOADER_KIIBOHD
+    ifeq ($(strip $(MCU)), MK20DX128)
+        MCU_LDSCRIPT = MK20DX128BLDR4
+    endif
+    ifeq ($(strip $(MCU)), MK20DX256)
+        MCU_LDSCRIPT = MK20DX256BLDR8
+    endif
+
+    DFU_ARGS = -d 1C11:B007
+    DFU_SUFFIX_ARGS = -v 1C11 -p B007
+endif
 
 ifdef BOOTLOADER_SIZE
     OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE))

build_layout.mk

@@ -3,8 +3,14 @@ LAYOUTS_REPOS := $(patsubst %/,%,$(sort $(dir $(wildcard $(LAYOUTS_PATH)/*/))))
 
 define SEARCH_LAYOUTS_REPO
     LAYOUT_KEYMAP_PATH := $$(LAYOUTS_REPO)/$$(LAYOUT)/$$(KEYMAP)
+    LAYOUT_KEYMAP_JSON := $$(LAYOUT_KEYMAP_PATH)/keymap.json
     LAYOUT_KEYMAP_C := $$(LAYOUT_KEYMAP_PATH)/keymap.c
-    ifneq ("$$(wildcard $$(LAYOUT_KEYMAP_C))","")
+    ifneq ("$$(wildcard $$(LAYOUT_KEYMAP_JSON))","")
+        -include $$(LAYOUT_KEYMAP_PATH)/rules.mk
+        KEYMAP_C := $(KEYBOARD_OUTPUT)/src/keymap.c
+        KEYMAP_JSON := $$(LAYOUT_KEYMAP_JSON)
+        KEYMAP_PATH := $$(LAYOUT_KEYMAP_PATH)
+    else ifneq ("$$(wildcard $$(LAYOUT_KEYMAP_C))","")
         -include $$(LAYOUT_KEYMAP_PATH)/rules.mk
         KEYMAP_C := $$(LAYOUT_KEYMAP_C)
         KEYMAP_PATH := $$(LAYOUT_KEYMAP_PATH)
@@ -24,4 +30,7 @@ ifneq ($(FORCE_LAYOUT),)
     endif
 endif
 
-$(foreach LAYOUT,$(LAYOUTS),$(eval $(call SEARCH_LAYOUTS)))
+$(foreach LAYOUT,$(LAYOUTS),$(eval $(call SEARCH_LAYOUTS)))
+
+# Use rule from build_json.mk, but update prerequisite in case KEYMAP_JSON was updated
+$(KEYBOARD_OUTPUT)/src/keymap.c: $(KEYMAP_JSON)

common_features.mk

@@ -246,12 +246,13 @@ ifeq ($(strip $(SERIAL_LINK_ENABLE)), yes)
     VAPTH += $(SERIAL_PATH)
 endif
 
-ifneq ($(strip $(VARIABLE_TRACE)),)
+VARIABLE_TRACE ?= no
+ifneq ($(strip $(VARIABLE_TRACE)),no)
     SRC += $(QUANTUM_DIR)/variable_trace.c
     OPT_DEFS += -DNUM_TRACED_VARIABLES=$(strip $(VARIABLE_TRACE))
-ifneq ($(strip $(MAX_VARIABLE_TRACE_SIZE)),)
-    OPT_DEFS += -DMAX_VARIABLE_TRACE_SIZE=$(strip $(MAX_VARIABLE_TRACE_SIZE))
-endif
+    ifneq ($(strip $(MAX_VARIABLE_TRACE_SIZE)),)
+        OPT_DEFS += -DMAX_VARIABLE_TRACE_SIZE=$(strip $(MAX_VARIABLE_TRACE_SIZE))
+    endif
 endif
 
 ifeq ($(strip $(LCD_ENABLE)), yes)

docs/_summary.md

@@ -111,6 +111,7 @@
     * [Velocikey](feature_velocikey.md)
 
 * Developing QMK
+  * [PR Checklist](pr_checklist.md)
   * Breaking Changes
     * [Overview](breaking_changes.md)
     * [My Pull Request Was Flagged](breaking_changes_instructions.md)

docs/config_options.md

@@ -43,8 +43,6 @@ This is a C header file that is one of the first things included, and will persi
   * generally who/whatever brand produced the board
 * `#define PRODUCT Board`
   * the name of the keyboard
-* `#define DESCRIPTION a keyboard`
-  * a short description of what the keyboard is
 * `#define MATRIX_ROWS 5`
   * the number of rows in your keyboard's matrix
 * `#define MATRIX_COLS 15`
@@ -250,7 +248,10 @@ There are a few different ways to set handedness for split keyboards (listed in
 * `#define SPLIT_HAND_PIN B7`
   * For using high/low pin to determine handedness, low = right hand, high = left hand. Replace `B7` with the pin you are using. This is optional, and if you leave `SPLIT_HAND_PIN` undefined, then you can still use the EE_HANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.
 
-* `#define EE_HANDS` (only works if `SPLIT_HAND_PIN` is not defined)
+* `#define SPLIT_HAND_MATRIX_GRID <out_pin>,<in_pin>`
+  * The handedness is determined by using the intersection of the keyswitches in the key matrix, which does not exist. Normally, when this intersection is shorted (level low), it is considered left. If you define `#define SPLIT_HAND_MATRIX_GRID_LOW_IS_RIGHT`, it is determined to be right when the level is low.
+
+* `#define EE_HANDS` (only works if `SPLIT_HAND_PIN` and `SPLIT_HAND_MATRIX_GRID` are not defined)
   * Reads the handedness value stored in the EEPROM after `eeprom-lefthand.eep`/`eeprom-righthand.eep` has been flashed to their respective halves.
 
 * `#define MASTER_RIGHT`

docs/custom_quantum_functions.md

@@ -319,7 +319,7 @@ This runs code every time that the layers get changed.  This can be useful for l
 
 ### Example `layer_state_set_*` Implementation
 
-This example shows how to set the [RGB Underglow](feature_rgblight.md) lights based on the layer, using the Planck as an example
+This example shows how to set the [RGB Underglow](feature_rgblight.md) lights based on the layer, using the Planck as an example.
 
 ```c
 layer_state_t layer_state_set_user(layer_state_t state) {
@@ -343,6 +343,11 @@ layer_state_t layer_state_set_user(layer_state_t state) {
   return state;
 }
 ```
+
+Use the `IS_LAYER_ON_STATE(state, layer)` and `IS_LAYER_OFF_STATE(state, layer)` macros to check the status of a particular layer.
+
+Outside of `layer_state_set_*` functions, you can use the `IS_LAYER_ON(layer)` and `IS_LAYER_OFF(layer)` macros to check global layer state.
+
 ### `layer_state_set_*` Function Documentation
 
 * Keyboard/Revision: `layer_state_t layer_state_set_kb(layer_state_t state)`
@@ -449,7 +454,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
                 layer_state_set(layer_state);   // then immediately update the layer color
             }
         }
-        return false; break;
+        return false;
     case RGB_MODE_FORWARD ... RGB_MODE_GRADIENT: // For any of the RGB codes (see quantum_keycodes.h, L400 for reference)
         if (record->event.pressed) { //This disables layer indication, as it's assumed that if you're changing this ... you want that disabled
             if (user_config.rgb_layer_change) {        // only if this is enabled

docs/documentation_best_practices.md

@@ -61,4 +61,4 @@ This page describes my cool feature. You can use my cool feature to make coffee
 |KC_SUGAR||Order Sugar|
 ```
 
-Place your documentation into `docs/feature_<my_cool_feature>.md`, and add that file to the appropriate place in `docs/_sidebar.md`. If you have added any keycodes be sure to add them to `docs/keycodes.md` with a link back to your feature page.
+Place your documentation into `docs/feature_<my_cool_feature>.md`, and add that file to the appropriate place in `docs/_summary.md`. If you have added any keycodes be sure to add them to `docs/keycodes.md` with a link back to your feature page.

docs/driver_installation_zadig.md

@@ -23,7 +23,7 @@ Zadig will automatically detect the bootloader device. You may sometimes need to
 
 !> If Zadig lists one or more devices with the `HidUsb` driver, your keyboard is probably not in bootloader mode. The arrow will be colored orange and you will be asked to confirm modifying a system driver. **Do not** proceed if this is the case!
 
-If the arrow appears green, select the driver, and click **Install Driver**. The `libusb-win32` driver will usually work for AVR, and `WinUSB` for ARM, but if you still cannot flash the board, try installing a different driver from the list. For flashing a USBaspLoader device via command line with msys2, the `libusbk` driver is recommended, otherwise `libusb-win32` will work fine if you are using QMK Toolbox for flashing.
+If the arrow appears green, select the driver, and click **Install Driver**. The `libusb-win32` driver will usually work for AVR, and `WinUSB` for ARM, but if you still cannot flash the board, try installing a different driver from the list. USBAspLoader devices must use the `libusbK` driver.
 
 ![Zadig with a bootloader driver correctly installed](https://i.imgur.com/b8VgXzx.png)
 

docs/es/hardware_avr.md

@@ -67,15 +67,14 @@ El archivo `config.h` es donde configuras el hardware y el conjunto de caracter
 
 En la parte superior de `config.h` encontrarás ajustes relacionados con USB. Estos controlan la apariencia de tu teclado en el Sistema Operativo. Si no tienes una buena razón para cambiar debes dejar el `VENDOR_ID` como `0xFEED`. Para el `PRODUCT_ID` debes seleccionar un número que todavía no esté en uso.
 
-Cambia las líneas de `MANUFACTURER`, `PRODUCT`, y `DESCRIPTION` para reflejar con precisión tu teclado.
+Cambia las líneas de `MANUFACTURER` y `PRODUCT` para reflejar con precisión tu teclado.
 
 ```c
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6060
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Tú
 #define PRODUCT         mi_teclado_fantastico
-#define DESCRIPTION     Un teclado personalizado
 ```
 
 ?> Windows y macOS mostrarán el `MANUFACTURER` y `PRODUCT` en la lista de dispositivos USB. `lsusb` en Linux toma estos de la lista mantenida por el [Repositorio de ID USB](http://www.linux-usb.org/usb-ids.html) por defecto. `lsusb -v` mostrará los valores reportados por el dispositivo, y también están presentes en los registros del núcleo después de conectarlo.

docs/faq_build.md

@@ -53,7 +53,7 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9203", TAG+="uacc
 
 **Note:** With older (before 1.12) ModemManager, filtering only works when not in strict mode, the following commands can update that settings:
 ```console
-sudo sed -i 's/--filter-policy=strict/--filter-policy=default/' /lib/systemd/system/ModemManager.service
+printf '[Service]\nExecStart=\nExecStart=/usr/sbin/ModemManager --filter-policy=default' | sudo tee /etc/systemd/system/ModemManager.service.d/policy.conf
 sudo systemctl daemon-reload
 sudo systemctl restart ModemManager
 ```