Skip to content

KNIME Analytics Platform - SDK Setup

License

Notifications You must be signed in to change notification settings

knime/knime-sdk-setup

Repository files navigation

KNIME® logo KNIME® Analytics Platform - SDK Setup

KNIME Analytics Platform is the leading open solution for data-driven innovation, helping you discover the potential hidden in your data, mine for fresh insights, or predict new futures. Our enterprise-grade, open source platform is fast to deploy, easy to scale, and intuitive to learn.

Image

The tools provided in this repository will help you set up your KNIME Analytics Platform SDK so that you can work with the source code of our extensions or develop your own for KNIME Analytics Platform. If you are not interested in development and prefer to simply download and try KNIME Analytics Platform right now, then click here.

This repository is maintained by the KNIME DevOps Team.

Introduction

KNIME Analytics Platform is built on Eclipse, employing its wealth of functionality in a variety of ways. A key concept behind Eclipse is its use of plug-ins, which can be added to an existing installation to provide additional functionality. Hence, an extension for KNIME Analytics Platform is essentially an Eclipse plug-in.

Target Platform

One important part of your development setup is how dependencies are managed. In Eclipse, this is handled using a local target platform, which is populated with all the required dependencies. A target platform defines a set of plug-ins that can be used as dependencies by projects in your workspace. In this case, the specified dependencies may comprise of utility libraries, KNIME Analytics Platform core functionality, or KNIME Extensions. Subsequently, the KNIME Extensions specified in the target platform will be available when you start your KNIME Analytics Platform development version. Generally, any Eclipse plug-in can be added to the target platform.

In practice, the target platform is defined using target platform definition files (.target ending), which can be loaded by Eclipse in order to populate the target platform. These files specify a list of dependencies and Eclipse configuration settings. This repository contains several such files (located in org.knime.sdk.setup) that specify different sets of plug-ins for the target platform. You may use either of the following target platform definition files.

  • KNIME-AP.target: contains the minimal required plug-ins for a KNIME Analytics Platform installation
  • KNIME-AP-complete.target: contains all KNIME Extensions without Community Contributions

Note: If you want to add or remove extensions from your used platform definition file (e.g. adding Community Contributions), please see the Adding Extensions to the Target Definition section below.

The target platform is different for every release of KNIME Analytics Platform. The different versions of the above mentioned .target files are contained on branches of this repository, hence you must select the correct branch of this repository in order to specify the version of KNIME Analytics Platform you want to use for your development work.

KNIME Analytics Platform Versions, Release Branches, and Tags

Each release line of KNIME Analytics Platform corresponds to a branch named releases/{YYYY-MM} where the date is the date of the first public release of that particular release line. For example, KNIME Analytics Platform 5.1.0 was released in July 2023, so its corresponding release line branch is releases/2023-07. That branch will also receive all bugfix commits slated for that particular release line after the initial .0 release. Note that, consequently, these branches might contain unreleased (bugfix) changes.

Each public release is assigned a tag consisting of the product (analytics-platform/) and the version identifier major.minor.bugfix. For example, repositories containing code which is released as part of KNIME Analytics Platform version 5.1.0 have the tag analytics-platform/5.1.0.

To summarize:

  • If you want to develop an extension that is compatible with a specific release line, check out the corresponding release branch (recommended).
  • If you want to target the latest nightly build, choose the master branch. However, bear in mind that extensions developed using a nightly build may not work in subsequent release builds due to changed and/or missing API.
  • In case you want to view code as of a particular version, obtain it via the corresponding tag.

In addition, each KNIME Analytics Platform version is based on a particular version of the Eclipse Platform, which is also noted in the table below.

KNIME Analytics Platform Release Line Branch Eclipse Version
Nightly (unreleased) master 2024-03*
5.4.x releases/2024-12 2024-03*
5.3.x releases/2024-06 2024-03*
5.2.x releases/2023-12 2023-03
5.1.x releases/2023-07 2023-03
4.7.x releases/2022-12 2022-06
4.6.x releases/2022-06 2021-03

(*) User on macOS: Note a limitation on the Java version, see Install Java below.

SDK Setup

This section provides step-by-step instructions on how to set up the KNIME Analytics Platform SDK. These instructions assume you are using the Eclipse Git integration (EGit) as your Git client, which is already contained in the Eclipse installation. However you can use any other Git client as well.

Note: In case you are on Apple Silicon (M1, M2, etc.) read the section "Apple Silicon Support" below.

1. Install Java

  • KNIME Analytics Platform uses Java 17 since version 4.6. In case you haven't installed the OpenJDK 17, download and install it. Users on macOS should not install a Java version newer than 17.0.9 due to a UI bug in Eclipse that occurs with newer versions. This bug will be fixed in Eclipse 2024-06+, but the fix is not yet in use as mentioned above.
    • for KNIME Analytics Platform 4.4 and 4.5, use OpenJDK 11.
    • for KNIME Analytics Platform up to 4.3, use OpenJDK 8.

2. Install Eclipse

  • Download and install the version of "Eclipse for RCP and RAP Developers" corresponding to the KNIME Analytics Platform version you want to develop against, according to the table above. Make sure you are using exactly the version noted, as there are compatibility issues with older/newer versions (for example, JUnit 5 tests might not be properly recognized).

3. Install Git and Git LFS

If you plan to use the Eclipse Git integration (EGit), you may skip this step.

  • Git: If you want to use Git manually (from the command line or using a Git client), Git can be downloaded from here. Note: For Linux, Git should already be part of most distributions and therefore does not need to be installed.

  • Git LFS: Git LFS should already be part of most Git installations. In order to check, try running the following command: git lfs. If the command cannot be found by the system, install Git LFS from here.

4. Configure Eclipse

  • Start Eclipse.
  • Configure the default JRE used by Eclipse to be the one you installed earlier. See the Eclipse Help how to perform this task.
  • Clone this repository (knime-sdk-setup) and import it into your Eclipse workspace. To do this using EGit, go to File → Import → Git → Projects from Git File → Clone URI. Enter: https://github.com/knime/knime-sdk-setup as URI and proceed. Now, select the branches you want to clone. Select all branches starting with releases/ and the master branch. Next, select the initial branch you want to work with (e.g. master, see Target Platform section above). Finally, Choose Import existing Eclipse projects, select all projects and click Finish.
  • Double click the target platform definition file (.target files In the imported org.knime.sdk.setup project) that you want to use for development (the difference between the files is explained in the Target Platform section above). If in doubt, use KNIME-AP-complete.target. NOTE: Resolving the target platform the first time takes a while as all dependencies need to be downloaded. You can monitor the progress at the bottom right corner of your Eclipse application. Wait until the target platform is resolved by Eclipse before continuing with the next step.
  • Now click Set as Active Target Platform (upper-right corner) and wait until Eclipse has resolved and activated the target platform. NOTE: Setting the target platform definition may also take a while.

5. Configure API Baseline

Set the API Baseline in Eclipse. The API Baseline ensures that no API breaks are introduced in new code (by showing an error message in the Eclipse editor when an API break is detected by Eclipse):

  • Go to Window → Preferences → Plug-in Development → API Baseline and Add Baseline...
  • Select A target platform
  • Select KNIME Analytics Platform (5.x release) (which is in the org.knime.sdk.setup project)
  • Click Refresh
  • Give the baseline a meaningful name (e.g. KNIME Analytics Platform (5.x release)) and click OK

Apple Silicon Support (M1, M2, etc.)

For Apple Silicon (M1, M2, etc. family of processors), determine whether you want to run native (aarch64) or under Rosetta 2 (x64/x86_64) and download the corresponding JDK build and the matching Eclipse build. Both have to be built for the same architecture, since otherwise some native libraries might not be properly resolved.

Known Caveats:

  • If you depend on the Tableau extension, you must choose x86_64, since Tableau does not supply aarch64 libraries. In case you want to use aarch64 and don't need the Tableau extension, you have to remove the corresponding entries manually from the target platform definition files. The entries you need to remove begin with org.knime.features.ext.tableau.
  • Some JDK version managers automatically install the build corresponding to the output of arch, which is arm64 for native Apple Silicon. In order to change that, the current terminal must be run under the specific architecture you want to use. For example, to run Terminal.app under Rosetta (x86_64 emulation), right click on the app bundle → "Get Info", and temporarily check "Open using Rosetta". The output of arch should now show i386.

Launch KNIME Analytics Platform

This section describes how to launch KNIME Analytics Platform from Eclipse after you have set up the KNIME Analytics Platform SDK following the steps from the SDK Setup section.

Once the SDK Setup is complete, a KNIME Analytics Platform launch configuration is available in the debug and run configuration dialogs of the Eclipse application. The run configuration starts a new KNIME instance with all KNIME Analytics Platform Extensions in the target platform and your local workspace. This launched instance can be used for testing your custom functionality.

NOTE: If the launch configuration is missing, a preconfigured launch configuration (.launch file) is located in the org.knime.sdk.setup project. Right click on the file KNIME Analytics Platform.launch and select Run As → KNIME Analytics Platform.

Adding Extensions to the Target Definition (Advanced)

This section describes how to add KNIME Extensions to your development setup by modifying the target platform definition file you chose in step 4 of the SDK Setup section. This is only necessary if you didn't select KNIME-AP-complete.target or if you want to add Community Contributions or third party extensions.

Do this by double clicking the .target file you want to modify (located in org.knime.sdk.setup) which opens the Target Definition view of Eclipse. This view shows the name of the Target Definition at the top and list of locations below. The target definition files already contain the KNIME Analytics Platform Update Site entry (in the version of the branch you checked out via Git, see Target Platform section above), which contains a set of KNIME Analytics Platform plug-ins (depending on the target definition file you chose). These entries can be modified using the buttons on the right:

  • Adding KNIME Analytics Platform Plug-ins: Select the KNIME Analytics Platform Update Site and click the Edit button on the right. In the dialog window that opens, simply edit the existing entries and add/remove extensions as needed.
  • Adding Third Party Update-Sites: For additional plug-ins from third party update sites, click the Add button, select Software Site and provide the URL of the site you wish to add. E.g. you can add the update sites from the Community Contributions Website (e.g. to add KNIME Image Processing plug-ins).

Explore KNIME Analytics Platform Source Code (Advanced)

This section describes how to add KNIME Extensions to your development setup by importing KNIME Analytics Platform source code projects into your Eclipse workspace. This is necessary if you plan to modify KNIME Analytics Platform source code. If that is not the case and you want to add extensions, see the Adding Extensions to the Target Definition section.

All publicly available KNIME Analytics Platform source code can be found on the KNIME GitHub page. To import, simply clone the repository you want (e.g. https://github.com/knime/knime-core then go to File → Import → General → Existing Projects into Workspace. From the dialog that opens, select the folder of the Git repository you just cloned. This displays a list of all projects that can be imported, in the middle of the dialog., Now select the projects you want to import (if in doubt choose Select All) and then click Finish. The projects will now appear in the Package Explorer of Eclipse.

IMPORTANT: All of the plug-ins available in your workspace take precedence over the plug-ins in the target platform. E.g. if you imported knime-core into your workspace and also added knime-core to the target platform definition, the version from the target platform is ignored. This is especially important to keep in mind if the source code of the plug-in in your workspace differs from the source code obtained via the target platform definition (i.e. the versions differ).

Note: You can safely ignore any warnings and errors related to pom.xml files (they only show up if you have installed an extension for Maven development in your Eclipse IDE). They are part of the KNIME internal build system.

Contribute to KNIME Analytics Platform Source Code

1. Contributor License Agreement

2. Configure API Baseline

  • Set the API Baseline in Eclipse as described in the SDK Setup section.

3. Get KNIME source code

  • Get the KNIME Analytics Platform source code you want work with as described in the Explore KNIME Analytics Platform Source Code section.

Troubleshooting

  • In case you experience compile errors such as The type org.dmg.pmml.* cannot be resolved or The import org.dmg.pmml.* cannot be resolved please close or remove the project org.knime.core.pmml. This project contains auto-generated classes only and is already part of the target platform.

  • Errors encountered while setting or modifying the target platform could result from old version numbers cached by Eclipse. This can be fixed by making sure that all plug-in versions specified in the target definition file are set to "0.0.0". To do this, double click on the .target file you want to use which opens the Target Definition view of Eclipse. At the bottom, click on the tab Source which opens the raw file in the Eclipse editor. There, make sure all version= properties are set to "0.0.0" (including quotation marks).

  • If you encounter errors when trying to launch KNIME Analytics Platform from within Eclipse, try:

    1. In Eclipse select Run → Run Configurations... ( or Debug Configurations...)
    2. Select the Run/Debug configuration you want to launch
    3. Select the Configuration tab
    4. Check the Clear the configuration area before launching checkbox

    If the problem is resolved, the checkbox can be unchecked upon the next launch

    Alternatively: shutdown Eclipse and start it with the -clean option.

Links

KNIME Community Contributors

A great place to start your journey of developing and publishing an extension is our Developer Guide. If you have questions about development, reach out to us in our Forum. And if you have already developed an extension, consider publishing it to make it available to the KNIME Community and be part of our developer community! We are happy to support you.