Initial commit

keebio · Dec 30, 2024 · 145cba1 · 145cba1
commit 145cba1
Show file tree

Hide file tree

Showing 14 changed files with 6,752 additions and 0 deletions.
diff --git a/Chiri 3x5 Plate Support.dxf b/Chiri 3x5 Plate Support.dxf
diff --git a/Chiri 3x5 Switch Plate.dxf b/Chiri 3x5 Switch Plate.dxf
diff --git a/Chiri 3x6 Plate Support.dxf b/Chiri 3x6 Plate Support.dxf
diff --git a/Chiri 3x6 Switch Plate.dxf b/Chiri 3x6 Switch Plate.dxf
diff --git a/LICENSE b/LICENSE
@@ -0,0 +1,21 @@
+MIT License
+
+Copyright (c) 2024 Keebio
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
diff --git a/README.md b/README.md
@@ -0,0 +1,31 @@
+# Chiri CE Case
+
+Design files for Chiri CE case parts
+
+
+## Files
+
+Files will mainly be provided in a format closely related to the design, so for 2D designs, DXFs will be provided, and not STLs. For STLs, you will need to generate your own from the 2D design files.
+
+- Switch Plate - Designed to be 1.2mm thick so Choc switches can clip in
+- Plate Support - Goes in between PCB and Switch Plate, designed to be 1.0mm thick
+- Tripod Mount Adapter (Experimental) - Remove 4 of the silicone bumpers at the bottom and insert 4 M3 screws from the topside of the tray into the adapter
+
+### Printable Tray Case
+
+In the [`printable`](printable/) folder, there are STL files for you to print out a case similar to the aluminum case design. The switch plates have been made to be thick enough while also having notches on the underside for the Choc switches to clip into the plate.
+
+In addition to printing the files, you will need the following parts:
+
+- 12x M2 8mm screws ([6mm screws](https://keeb.io/products/m2-screws-and-standoffs?variant=12490111582302) should fine as well)
+- [Shroomies Silicone Feet](https://keeb.io/products/shroomies-silicone-feet?utm_source=docs)
+
+This design is not suitable for handwiring, as it's been designed with use of the PCB in-mind.
+
+## Other Info
+
+The silicone feet on the bottom of the tray can be removed. 4 of the holes are arranged in a 50x90mm rectangle and are large enough to accommodate M3 screws being inserted through them. The other two holes are spaced 50mm apart.
+
+## License
+
+These case files are released under the MIT License.
diff --git a/printable/Chiri CE 3x5 Left Switch Plate.stl b/printable/Chiri CE 3x5 Left Switch Plate.stl
diff --git a/printable/Chiri CE 3x5 Left Tray.stl b/printable/Chiri CE 3x5 Left Tray.stl
diff --git a/printable/Chiri CE 3x5 Right Switch Plate.stl b/printable/Chiri CE 3x5 Right Switch Plate.stl
diff --git a/printable/Chiri CE 3x5 Right Tray.stl b/printable/Chiri CE 3x5 Right Tray.stl
diff --git a/printable/Chiri CE 3x6 Left Switch Plate.stl b/printable/Chiri CE 3x6 Left Switch Plate.stl
diff --git a/printable/Chiri CE 3x6 Left Tray.stl b/printable/Chiri CE 3x6 Left Tray.stl
diff --git a/printable/Chiri CE 3x6 Right Switch Plate.stl b/printable/Chiri CE 3x6 Right Switch Plate.stl
diff --git a/printable/Chiri CE 3x6 Right Tray.stl b/printable/Chiri CE 3x6 Right Tray.stl