UEFI x86_64 System

This Nerves System is forked from the official x86_64 system and has been modified to allow UEFI boot from the internal eMMC on the LogicSupply CL210G-10.

Feature	Description
CPU	Intel
Memory	512 MB+ DRAM
Storage	Hard disk/SSD/etc. (/dev/sda)
Linux kernel	4.19
IEx terminal	Display - tty0
Hardware I/O	None
Ethernet	Yes

Using

The most common way of using this Nerves System is create a project with mix nerves.new and to export MIX_TARGET=x86_64_uefi. See the Getting started guide for more information.

If you need custom modifications to this system for your device, clone this repository and update as described in Making custom systems

If you're new to Nerves, check out the nerves_init_gadget project for creating a starter project. It will get you started with the basics like bringing up networking, initializing the writable application data partition, and enabling ssh-based firmware updates. It's easiest to begin by using the wired Ethernet interface 'eth0' and DHCP.

Root disk naming

If you have multiple SSDs, or other devices connected, it's possible that Linux will enumerate those devices in a nondeterministic order. This can be mitigated by using udev to populate the /dev/disks/by-* directories, but even this can be inconvenient when you just want to refer to the drive that provides the root filesystem. To address this, erlinit creates /dev/rootdisk0, /dev/rootdisk0p1, etc. and symlinks them to the expected devices. For example, if your root file system is on /dev/mmcblk0p1, you'll get a symlink from /dev/rootdisk0p1 to /dev/mmcblk0p1 and the whole disk will be /dev/rootdisk0. Similarly, if the root filesystem is on /dev/sdb1, you'd still get /dev/rootdisk0p1 and /dev/rootdisk0 and they'd by symlinked to /dev/sdb1 and /dev/sdb respectively.

Provisioning devices

This system supports storing provisioning information in a small key-value store outside of any filesystem. Provisioning is an optional step and reasonable defaults are provided if this is missing.

Provisioning information can be queried using the Nerves.Runtime KV store's Nerves.Runtime.KV.get/1 function.

Keys used by this system are:

Key	Example Value	Description
nerves_serial_number	"12345678"	By default, this string is used to create unique hostnames and Erlang node names. If unset, it defaults to part of the Ethernet adapter's MAC address.

The normal procedure would be to set these keys once in manufacturing or before deployment and then leave them alone.

For example, to provision a serial number on a running device, run the following and reboot:

iex> cmd("fw_setenv nerves_serial_number 12345678")

This system supports setting the serial number offline. To do this, set the NERVES_SERIAL_NUMBER environment variable when burning the firmware. If you're programming MicroSD cards using fwup, the commandline is:

sudo NERVES_SERIAL_NUMBER=12345678 fwup path_to_firmware.fw

Serial numbers are stored on the MicroSD card so if the MicroSD card is replaced, the serial number will need to be reprogrammed. The numbers are stored in a U-boot environment block. This is a special region that is separate from the application partition so reformatting the application partition will not lose the serial number or any other data stored in this block.

Additional key value pairs can be provisioned by overriding the default provisioning.conf file location by setting the environment variable NERVES_PROVISIONING=/path/to/provisioning.conf. The default provisioning.conf will set the nerves_serial_number, if you override the location to this file, you will be responsible for setting this yourself.