Update edit_config_template.html #2925

SybexX · 2024-02-17T04:50:39Z

Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen

caco3 · 2024-02-17T09:28:57Z

@SybexX Bist Du in Telegram noch aktiv?

* Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- Co-authored-by: jomjol <[email protected]> * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- Co-authored-by: CaCO3 <[email protected]> * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- Co-authored-by: CaCO3 <[email protected]> * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. Co-authored-by: CaCO3 <[email protected]> * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- Co-authored-by: CaCO3 <[email protected]> * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- Co-authored-by: CaCO3 <[email protected]> Co-authored-by: michael <[email protected]> * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- Co-authored-by: CaCO3 <[email protected]> * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- Co-authored-by: CaCO3 <[email protected]> * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- Co-authored-by: CaCO3 <[email protected]> * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- Co-authored-by: CaCO3 <[email protected]> * Update Changelog.md * Update Changelog.md --------- Co-authored-by: jomjol <[email protected]> Co-authored-by: michael <[email protected]> Co-authored-by: Frank Haverland <[email protected]> Co-authored-by: kub3let <[email protected]> Co-authored-by: Marco H <[email protected]> Co-authored-by: Henry Thasler <[email protected]> Co-authored-by: CaCO3 <[email protected]> Co-authored-by: Sebastian Lövdahl <[email protected]> Co-authored-by: Raphael Hehl <[email protected]> Co-authored-by: jasaw <[email protected]> Co-authored-by: Francesco Carnielli <[email protected]> Co-authored-by: kalwados <[email protected]>

* Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- * Update Changelog.md * Update Changelog.md --------- Co-authored-by: jomjol <[email protected]> Co-authored-by: michael <[email protected]> Co-authored-by: Frank Haverland <[email protected]> Co-authored-by: kub3let <[email protected]> Co-authored-by: Marco H <[email protected]> Co-authored-by: Henry Thasler <[email protected]> Co-authored-by: CaCO3 <[email protected]> Co-authored-by: Sebastian Lövdahl <[email protected]> Co-authored-by: Raphael Hehl <[email protected]> Co-authored-by: jasaw <[email protected]> Co-authored-by: Francesco Carnielli <[email protected]> Co-authored-by: kalwados <[email protected]>

* Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- Co-authored-by: jomjol <[email protected]> * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- Co-authored-by: CaCO3 <[email protected]> * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- Co-authored-by: CaCO3 <[email protected]> * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. Co-authored-by: CaCO3 <[email protected]> * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- Co-authored-by: CaCO3 <[email protected]> * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- Co-authored-by: CaCO3 <[email protected]> Co-authored-by: michael <[email protected]> * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- Co-authored-by: CaCO3 <[email protected]> * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- Co-authored-by: CaCO3 <[email protected]> * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- Co-authored-by: CaCO3 <[email protected]> * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- Co-authored-by: CaCO3 <[email protected]> * Update Changelog.md * Update Changelog.md * Prepare next release (#3267) (#3270) * Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- * Update Changelog.md * Update Changelog.md --------- Co-authored-by: jomjol <[email protected]> Co-authored-by: michael <[email protected]> Co-authored-by: Frank Haverland <[email protected]> Co-authored-by: kub3let <[email protected]> Co-authored-by: Marco H <[email protected]> Co-authored-by: Henry Thasler <[email protected]> Co-authored-by: CaCO3 <[email protected]> Co-authored-by: Sebastian Lövdahl <[email protected]> Co-authored-by: Raphael Hehl <[email protected]> Co-authored-by: jasaw <[email protected]> Co-authored-by: Francesco Carnielli <[email protected]> Co-authored-by: kalwados <[email protected]> * revert TFlite submodule update as certain modules crash with it, see #3269 * Rename NUMBER.AnalogDigitTransitionStart.md to NUMBER.AnalogToDigitTransitionStart.md * Update NUMBER.AnalogToDigitTransitionStart.md * Update edit_config_template.html * changed the webhook UploadImg to false * changed the webhook UploadImg to false (#3279) Co-authored-by: CaCO3 <[email protected]> * Show boolean option in settings page (#3285) * changed the webhook UploadImg to false * show boolean value on boolean drop down boxes --------- Co-authored-by: CaCO3 <[email protected]> * changed default value from boolean to numeric value in parameter camDenoise documentation * Update edit_explain_7.html #3284 * docs: update README.md (#3290) prefered -> preferred * rename/remove unused parameters (#3291) * migrate-cam-parameters (#3288) * Update main.cpp * remove commented out code --------- Co-authored-by: CaCO3 <[email protected]> * Update Changelog.md * cleanup --------- Co-authored-by: jomjol <[email protected]> Co-authored-by: michael <[email protected]> Co-authored-by: Frank Haverland <[email protected]> Co-authored-by: kub3let <[email protected]> Co-authored-by: Marco H <[email protected]> Co-authored-by: Henry Thasler <[email protected]> Co-authored-by: CaCO3 <[email protected]> Co-authored-by: Sebastian Lövdahl <[email protected]> Co-authored-by: Raphael Hehl <[email protected]> Co-authored-by: jasaw <[email protected]> Co-authored-by: Francesco Carnielli <[email protected]> Co-authored-by: kalwados <[email protected]> Co-authored-by: Ikko Eltociear Ashimine <[email protected]>

* Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- Co-authored-by: jomjol <[email protected]> * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- Co-authored-by: CaCO3 <[email protected]> * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- Co-authored-by: CaCO3 <[email protected]> * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. Co-authored-by: CaCO3 <[email protected]> * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- Co-authored-by: CaCO3 <[email protected]> * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- Co-authored-by: CaCO3 <[email protected]> Co-authored-by: michael <[email protected]> * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- Co-authored-by: CaCO3 <[email protected]> * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- Co-authored-by: CaCO3 <[email protected]> * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- Co-authored-by: CaCO3 <[email protected]> * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- Co-authored-by: CaCO3 <[email protected]> * Update Changelog.md * Update Changelog.md * Prepare next release (#3267) (#3270) * Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- * Update Changelog.md * Update Changelog.md --------- Co-authored-by: jomjol <[email protected]> Co-authored-by: michael <[email protected]> Co-authored-by: Frank Haverland <[email protected]> Co-authored-by: kub3let <[email protected]> Co-authored-by: Marco H <[email protected]> Co-authored-by: Henry Thasler <[email protected]> Co-authored-by: CaCO3 <[email protected]> Co-authored-by: Sebastian Lövdahl <[email protected]> Co-authored-by: Raphael Hehl <[email protected]> Co-authored-by: jasaw <[email protected]> Co-authored-by: Francesco Carnielli <[email protected]> Co-authored-by: kalwados <[email protected]> * revert TFlite submodule update as certain modules crash with it, see #3269 * Rename NUMBER.AnalogDigitTransitionStart.md to NUMBER.AnalogToDigitTransitionStart.md * Update NUMBER.AnalogToDigitTransitionStart.md * Update edit_config_template.html * changed the webhook UploadImg to false * changed the webhook UploadImg to false (#3279) Co-authored-by: CaCO3 <[email protected]> * Show boolean option in settings page (#3285) * changed the webhook UploadImg to false * show boolean value on boolean drop down boxes --------- Co-authored-by: CaCO3 <[email protected]> * changed default value from boolean to numeric value in parameter camDenoise documentation * Update edit_explain_7.html #3284 * docs: update README.md (#3290) prefered -> preferred * rename/remove unused parameters (#3291) * migrate-cam-parameters (#3288) * Update main.cpp * remove commented out code --------- Co-authored-by: CaCO3 <[email protected]> * Update Changelog.md * cleanup * Skip release jobs on non-release changes * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml --------- Co-authored-by: jomjol <[email protected]> Co-authored-by: michael <[email protected]> Co-authored-by: Frank Haverland <[email protected]> Co-authored-by: kub3let <[email protected]> Co-authored-by: Marco H <[email protected]> Co-authored-by: Henry Thasler <[email protected]> Co-authored-by: CaCO3 <[email protected]> Co-authored-by: Sebastian Lövdahl <[email protected]> Co-authored-by: Raphael Hehl <[email protected]> Co-authored-by: jasaw <[email protected]> Co-authored-by: Francesco Carnielli <[email protected]> Co-authored-by: kalwados <[email protected]> Co-authored-by: Ikko Eltociear Ashimine <[email protected]>

* Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- Co-authored-by: jomjol <[email protected]> * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- Co-authored-by: CaCO3 <[email protected]> * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- Co-authored-by: CaCO3 <[email protected]> * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. Co-authored-by: CaCO3 <[email protected]> * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- Co-authored-by: CaCO3 <[email protected]> * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- Co-authored-by: CaCO3 <[email protected]> Co-authored-by: michael <[email protected]> * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- Co-authored-by: CaCO3 <[email protected]> * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- Co-authored-by: CaCO3 <[email protected]> * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- Co-authored-by: CaCO3 <[email protected]> * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- Co-authored-by: CaCO3 <[email protected]> * Update Changelog.md * Update Changelog.md * Prepare next release (#3267) (#3270) * Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- * Update Changelog.md * Update Changelog.md --------- Co-authored-by: jomjol <[email protected]> Co-authored-by: michael <[email protected]> Co-authored-by: Frank Haverland <[email protected]> Co-authored-by: kub3let <[email protected]> Co-authored-by: Marco H <[email protected]> Co-authored-by: Henry Thasler <[email protected]> Co-authored-by: CaCO3 <[email protected]> Co-authored-by: Sebastian Lövdahl <[email protected]> Co-authored-by: Raphael Hehl <[email protected]> Co-authored-by: jasaw <[email protected]> Co-authored-by: Francesco Carnielli <[email protected]> Co-authored-by: kalwados <[email protected]> * revert TFlite submodule update as certain modules crash with it, see #3269 * Rename NUMBER.AnalogDigitTransitionStart.md to NUMBER.AnalogToDigitTransitionStart.md * Update NUMBER.AnalogToDigitTransitionStart.md * Update edit_config_template.html * changed the webhook UploadImg to false * changed the webhook UploadImg to false (#3279) Co-authored-by: CaCO3 <[email protected]> * Show boolean option in settings page (#3285) * changed the webhook UploadImg to false * show boolean value on boolean drop down boxes --------- Co-authored-by: CaCO3 <[email protected]> * changed default value from boolean to numeric value in parameter camDenoise documentation * Update edit_explain_7.html #3284 * docs: update README.md (#3290) prefered -> preferred * rename/remove unused parameters (#3291) * migrate-cam-parameters (#3288) * Update main.cpp * remove commented out code --------- Co-authored-by: CaCO3 <[email protected]> * Update Changelog.md * cleanup * Skip release jobs on non-release changes * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml --------- Co-authored-by: jomjol <[email protected]> Co-authored-by: michael <[email protected]> Co-authored-by: Frank Haverland <[email protected]> Co-authored-by: kub3let <[email protected]> Co-authored-by: Marco H <[email protected]> Co-authored-by: Henry Thasler <[email protected]> Co-authored-by: CaCO3 <[email protected]> Co-authored-by: Sebastian Lövdahl <[email protected]> Co-authored-by: Raphael Hehl <[email protected]> Co-authored-by: jasaw <[email protected]> Co-authored-by: Francesco Carnielli <[email protected]> Co-authored-by: kalwados <[email protected]> Co-authored-by: Ikko Eltociear Ashimine <[email protected]>

* Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- Co-authored-by: jomjol <[email protected]> * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- Co-authored-by: CaCO3 <[email protected]> * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- Co-authored-by: CaCO3 <[email protected]> * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. Co-authored-by: CaCO3 <[email protected]> * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- Co-authored-by: CaCO3 <[email protected]> * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- Co-authored-by: CaCO3 <[email protected]> Co-authored-by: michael <[email protected]> * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- Co-authored-by: CaCO3 <[email protected]> * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- Co-authored-by: CaCO3 <[email protected]> * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- Co-authored-by: CaCO3 <[email protected]> * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- Co-authored-by: CaCO3 <[email protected]> * Update Changelog.md * Update Changelog.md * Prepare next release (#3267) (#3270) * Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- * Update Changelog.md * Update Changelog.md --------- Co-authored-by: jomjol <[email protected]> Co-authored-by: michael <[email protected]> Co-authored-by: Frank Haverland <[email protected]> Co-authored-by: kub3let <[email protected]> Co-authored-by: Marco H <[email protected]> Co-authored-by: Henry Thasler <[email protected]> Co-authored-by: CaCO3 <[email protected]> Co-authored-by: Sebastian Lövdahl <[email protected]> Co-authored-by: Raphael Hehl <[email protected]> Co-authored-by: jasaw <[email protected]> Co-authored-by: Francesco Carnielli <[email protected]> Co-authored-by: kalwados <[email protected]> * revert TFlite submodule update as certain modules crash with it, see #3269 * Rename NUMBER.AnalogDigitTransitionStart.md to NUMBER.AnalogToDigitTransitionStart.md * Update NUMBER.AnalogToDigitTransitionStart.md * Update edit_config_template.html * changed the webhook UploadImg to false * changed the webhook UploadImg to false (#3279) Co-authored-by: CaCO3 <[email protected]> * Show boolean option in settings page (#3285) * changed the webhook UploadImg to false * show boolean value on boolean drop down boxes --------- Co-authored-by: CaCO3 <[email protected]> * changed default value from boolean to numeric value in parameter camDenoise documentation * Update edit_explain_7.html #3284 * docs: update README.md (#3290) prefered -> preferred * rename/remove unused parameters (#3291) * migrate-cam-parameters (#3288) * Update main.cpp * remove commented out code --------- Co-authored-by: CaCO3 <[email protected]> * Update Changelog.md * cleanup * Skip release jobs on non-release changes * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * fix pipeline * Update build.yaml --------- Co-authored-by: jomjol <[email protected]> Co-authored-by: michael <[email protected]> Co-authored-by: Frank Haverland <[email protected]> Co-authored-by: kub3let <[email protected]> Co-authored-by: Marco H <[email protected]> Co-authored-by: Henry Thasler <[email protected]> Co-authored-by: CaCO3 <[email protected]> Co-authored-by: Sebastian Lövdahl <[email protected]> Co-authored-by: Raphael Hehl <[email protected]> Co-authored-by: jasaw <[email protected]> Co-authored-by: Francesco Carnielli <[email protected]> Co-authored-by: kalwados <[email protected]> Co-authored-by: Ikko Eltociear Ashimine <[email protected]>

* fix pipeline (#3294) * Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- Co-authored-by: jomjol <[email protected]> * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- Co-authored-by: CaCO3 <[email protected]> * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- Co-authored-by: CaCO3 <[email protected]> * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: https://github.com/jomjol/AI-on-the-edge-device/pull/3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. Co-authored-by: CaCO3 <[email protected]> * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update https://github.com/jomjol/AI-on-the-edge-device/issues/3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- Co-authored-by: CaCO3 <[email protected]> * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in https://github.com/jomjol/AI-on-the-edge-device/commit/33893eb566382ee228dfb791781b3a497c7c5e07 but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- Co-authored-by: CaCO3 <[email protected]> Co-authored-by: michael <[email protected]> * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested https://github.com/jomjol/AI-on-the-edge-device/issues/3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- Co-authored-by: CaCO3 <[email protected]> * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- Co-authored-by: CaCO3 <[email protected]> * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- Co-authored-by: CaCO3 <[email protected]> * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d483a0cdc5048e1738735693bb80a23a04. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4fae7f6a73013080110fa1c21f4cc2b06ec. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- Co-authored-by: CaCO3 <[email protected]> * Update Changelog.md * Update Changelog.md * Prepare next release (#3267) (#3270) * Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: https://github.com/jomjol/AI-on-the-edge-device/pull/3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update https://github.com/jomjol/AI-on-the-edge-device/issues/3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in https://github.com/jomjol/AI-on-the-edge-device/commit/33893eb566382ee228dfb791781b3a497c7c5e07 but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested https://github.com/jomjol/AI-on-the-edge-device/issues/3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d483a0cdc5048e1738735693bb80a23a04. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4fae7f6a73013080110fa1c21f4cc2b06ec. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- * Update Changelog.md * Update Changelog.md --------- Co-authored-by: jomjol <[email protected]> Co-authored-by: michael <[email protected]> Co-authored-by: Frank Haverland <[email protected]> Co-authored-by: kub3let <[email protected]> Co-authored-by: Marco H <[email protected]> Co-authored-by: Henry Thasler <[email protected]> Co-authored-by: CaCO3 <[email protected]> Co-authored-by: Sebastian Lövdahl <[email protected]> Co-authored-by: Raphael Hehl <[email protected]> Co-authored-by: jasaw <[email protected]> Co-authored-by: Francesco Carnielli <[email protected]> Co-authored-by: kalwados <[email protected]> * revert TFlite submodule update as certain modules crash with it, see https://github.com/jomjol/AI-on-the-edge-device/issues/3269 * Rename NUMBER.AnalogDigitTransitionStart.md to NUMBER.AnalogToDigitTransitionStart.md * Update NUMBER.AnalogToDigitTransitionStart.md * Update edit_config_template.html * changed the webhook UploadImg to false * changed the webhook UploadImg to false (#3279) Co-authored-by: CaCO3 <[email protected]> * Show boolean option in settings page (#3285) * changed the webhook UploadImg to false * show boolean value on boolean drop down boxes --------- Co-authored-by: CaCO3 <[email protected]> * changed default value from boolean to numeric value in parameter camDenoise documentation * Update edit_explain_7.html https://github.com/jomjol/AI-on-the-edge-device/issues/3284?notification_referrer_id=NT_kwDOAAj1wbIxMjY3MDI1Njk3MDo1ODcyMDE#issuecomment-2387102786 * docs: update README.md (#3290) prefered -> preferred * rename/remove unused parameters (#3291) * migrate-cam-parameters (#3288) * Update main.cpp * remove commented out code --------- Co-authored-by: CaCO3 <[email protected]> * Update Changelog.md * cleanup * Skip release jobs on non-release changes * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml --------- Co-authored-by: jomjol <[email protected]> Co-authored-by: michael <[email protected]> Co-authored-by: Frank Haverland <[email protected]> Co-authored-by: kub3let <[email protected]> Co-authored-by: Marco H <[email protected]> Co-authored-by: Henry Thasler <[email protected]> Co-authored-by: CaCO3 <[email protected]> Co-authored-by: Sebastian Lövdahl <[email protected]> Co-authored-by: Raphael Hehl <[email protected]> Co-authored-by: jasaw <[email protected]> Co-authored-by: Francesco Carnielli <[email protected]> Co-authored-by: kalwados <[email protected]> Co-authored-by: Ikko Eltociear Ashimine <[email protected]> * update pipeline (#3296) * Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- Co-authored-by: jomjol <[email protected]> * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- Co-authored-by: CaCO3 <[email protected]> * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- Co-authored-by: CaCO3 <[email protected]> * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: https://github.com/jomjol/AI-on-the-edge-device/pull/3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. Co-authored-by: CaCO3 <[email protected]> * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update https://github.com/jomjol/AI-on-the-edge-device/issues/3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- Co-authored-by: CaCO3 <[email protected]> * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in https://github.com/jomjol/AI-on-the-edge-device/commit/33893eb566382ee228dfb791781b3a497c7c5e07 but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- Co-authored-by: CaCO3 <[email protected]> Co-authored-by: michael <[email protected]> * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested https://github.com/jomjol/AI-on-the-edge-device/issues/3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- Co-authored-by: CaCO3 <[email protected]> * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- Co-authored-by: CaCO3 <[email protected]> * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- Co-authored-by: CaCO3 <[email protected]> * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d483a0cdc5048e1738735693bb80a23a04. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4fae7f6a73013080110fa1c21f4cc2b06ec. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- Co-authored-by: CaCO3 <[email protected]> * Update Changelog.md * Update Changelog.md * Prepare next release (#3267) (#3270) * Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: https://github.com/jomjol/AI-on-the-edge-device/pull/3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update https://github.com/jomjol/AI-on-the-edge-device/issues/3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in https://github.com/jomjol/AI-on-the-edge-device/commit/33893eb566382ee228dfb791781b3a497c7c5e07 but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested https://github.com/jomjol/AI-on-the-edge-device/issues/3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d483a0cdc5048e1738735693bb80a23a04. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4fae7f6a73013080110fa1c21f4cc2b06ec. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- * Update Changelog.md * Update Changelog.md --------- Co-authored-by: jomjol <[email protected]> Co-authored-by: michael <[email protected]> Co-authored-by: Frank Haverland <[email protected]> Co-authored-by: kub3let <[email protected]> Co-authored-by: Marco H <[email protected]> Co-authored-by: Henry Thasler <[email protected]> Co-authored-by: CaCO3 <[email protected]> Co-authored-by: Sebastian Lövdahl <[email protected]> Co-authored-by: Raphael Hehl <[email protected]> Co-authored-by: jasaw <[email protected]> Co-authored-by: Francesco Carnielli <[email protected]> Co-authored-by: kalwados <[email protected]> * revert TFlite submodule update as certain modules crash with it, see https://github.com/jomjol/AI-on-the-edge-device/issues/3269 * Rename NUMBER.AnalogDigitTransitionStart.md to NUMBER.AnalogToDigitTransitionStart.md * Update NUMBER.AnalogToDigitTransitionStart.md * Update edit_config_template.html * changed the webhook UploadImg to false * changed the webhook UploadImg to false (#3279) Co-authored-by: CaCO3 <[email protected]> * Show boolean option in settings page (#3285) * changed the webhook UploadImg to false * show boolean value on boolean drop down boxes --------- Co-authored-by: CaCO3 <[email protected]> * changed default value from boolean to numeric value in parameter camDenoise documentation * Update edit_explain_7.html https://github.com/jomjol/AI-on-the-edge-device/issues/3284?notification_referrer_id=NT_kwDOAAj1wbIxMjY3MDI1Njk3MDo1ODcyMDE#issuecomment-2387102786 * docs: update README.md (#3290) prefered -> preferred * rename/remove unused parameters (#3291) * migrate-cam-parameters (#3288) * Update main.cpp * remove commented out code --------- Co-authored-by: CaCO3 <[email protected]> * Update Changelog.md * cleanup * Skip release jobs on non-release changes * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * fix pipeline * Update build.yaml --------- Co-authored-by: jomjol <[email protected]> Co-authored-by: michael <[email protected]> Co-authored-by: Frank Haverland <[email protected]> Co-authored-by: kub3let <[email protected]> Co-authored-by: Marco H <[email protected]> Co-authored-by: Henry Thasler <[email protected]> Co-authored-by: CaCO3 <[email protected]> Co-authored-by: Sebastian Lövdahl <[email protected]> Co-authored-by: Raphael Hehl <[email protected]> Co-authored-by: jasaw <[email protected]> Co-authored-by: Francesco Carnielli <[email protected]> Co-authored-by: kalwados <[email protected]> Co-authored-by: Ikko Eltociear Ashimine <[email protected]> --------- Co-authored-by: jomjol <[email protected]> Co-authored-by: michael <[email protected]> Co-authored-by: Frank Haverland <[email protected]> Co-authored-by: kub3let <[email protected]> Co-authored-by: Marco H <[email protected]> Co-authored-by: Henry Thasler <[email protected]> Co-authored-by: CaCO3 <[email protected]> Co-authored-by: Sebastian Lövdahl <[email protected]> Co-authored-by: Raphael Hehl <[email protected]> Co-authored-by: jasaw <[email protected]> Co-authored-by: Francesco Carnielli <[email protected]> Co-authored-by: kalwados <[email protected]> Co-authored-by: Ikko Eltociear Ashimine <[email protected]>

Update edit_config_template.html

1eb969e

Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen

caco3 merged commit fbe4609 into jomjol:rolling Feb 17, 2024
6 checks passed

SybexX deleted the zoom_edit_config_template_html branch February 18, 2024 19:05

caco3 mentioned this pull request Sep 29, 2024

Prepare next release (#3267) #3270

Merged

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Update edit_config_template.html #2925

Update edit_config_template.html #2925

SybexX commented Feb 17, 2024

caco3 commented Feb 17, 2024

Update edit_config_template.html #2925

Update edit_config_template.html #2925

Conversation

SybexX commented Feb 17, 2024

caco3 commented Feb 17, 2024