Home Assistant component for interacting with Solarman data collectors that works with a variety of inverters and connects in direct mode over the local network and no cables are required. It has been tested with a 5kW DEYE/SUNSYNK inverter.
This component uses the version 5 specification of the communication protocol. If you inverter/collector is older and this comoonent does not work, try the following integration:
https://github.com/heinoldenhuis/home_assistant_omnik_solar
On your DHCP server, allocate a static IP to the WiFi data logger.
In your configuration.yaml file, add the following values under "sensors"
Example:
sensors:
- platform: solarman
name: DEYE
inverter_host: 192.168.0.201
inverter_port: 8899
inverter_serial: 1720747149
scan_interval: 30
| Parameter | Description |
|---|---|
| name | This name will be prefixed to all parameter values |
| inverter_host | The IP address of the data logger |
| inverter_port | Always 8899 |
| inverter_serial | The serial number of the data collector |
| scan_interval | Time in seconds between refresh intervals |