TEST: YAML update WNCV 3.3 StopMotion

jmeg-sfy · Feb 2, 2022 · fc028fc · fc028fc
1 parent fae363e
commit fc028fc
Show file tree

Hide file tree

Showing 3 changed files with 822 additions and 69 deletions.
diff --git a/src/app/tests/suites/certification/Test_TC_WNCV_3_3.yaml b/src/app/tests/suites/certification/Test_TC_WNCV_3_3.yaml
@@ -21,71 +21,136 @@ config:
     endpoint: 1
 
 tests:
-    - label: "Wait for the commissioned device to be retrieved"
+    - label: "0: Wait for the commissioned device to be retrieved"
       cluster: "DelayCommands"
       command: "WaitForCommissionee"
 
-    ### Step 1x -> Initialize Position
-    ### MANDATORY Command
-    - label: "1a: TH adjusts the the DUT to a non-open position"
+    ################ Position Init Phase #############
+    ### Step 1x -> Initialize the Covering position before any testing
+    ### MANDATORY Init Commands
+    - label: "1a: TH sends DownOrClose command to preposition the DUT in the opposite direction"
+      command: "DownOrClose"
+
+    - label: "1b: TH Waits for 6-8 seconds movement(s) on the device"
+      cluster: "DelayCommands"
+      command: "WaitForMs"
+      arguments:
+          values:
+              - name: "ms"
+                value: 6000
+
+    - label: "1c: TH sends UpOrOpen command to preposition the DUT in the opposite direction"
       command: "UpOrOpen"
 
-    ### Depends on a sleep/wait command how to do this with a real device
-    - label: "1b: Wait for the movement to start and go on for a few seconds"
-      disabled: true
+    - label: "1d: TH Waits for 2 seconds movement(s) on the device"
+      cluster: "DelayCommands"
+      command: "WaitForMs"
+      arguments:
+          values:
+              - name: "ms"
+                value: 2000
+
+    ######## StopMotion Command #######
+    ### Step 2x -> Check StopMotion fast effects
+    ### Before subscribe to reports
+    - label: "2: Subscribe to DUT reports on OperationalStatus attribute"
+      command: "subscribeAttribute"
+      attribute: "OperationalStatus"
+      minInterval: 4
+      maxInterval: 5
+      response:
+          constraints:
+              type: map8
 
-    ### Step 2x -> Check Command instant effects + longer effects
     ### MANDATORY Command
-    - label: "2a: TH sends StopMotion command to DUT"
+    - label: "2a: TH sends a StopMotion command to DUT"
       command: "StopMotion"
 
+    ### DUT Slow down and stop
+    - label: "2b: TH waits for 3 seconds the end of inertial movement(s) on the device"
+      cluster: "DelayCommands"
+      command: "WaitForMs"
+      arguments:
+          values:
+              - name: "ms"
+                value: 3000
+
+    ### Must Be ZERO
+    # The value of bit 0..1 must be 00b & if (LF) value of bit 2..3 must be 00b & if (TL) value of bit 4..5 must be 00b
+    - label: "2c: Verify DUT reports OperationalStatus attribute to TH after a StopMotion"
+      command: "waitForReport"
+      attribute: "OperationalStatus"
+      response:
+          value: 0
+
+    ### DUT updates its attributes
+    - label: "2d: TH waits for 100-1000ms attributes update on the device"
+      cluster: "DelayCommands"
+      command: "WaitForMs"
+      arguments:
+          values:
+              - name: "ms"
+                value: 1000
+
     ### MANDATORY reads
-    - label: "2b: TH reads OperationalStatus attribute from DUT"
+    - label: "2e: TH reads OperationalStatus attribute from DUT"
       command: "readAttribute"
       attribute: "OperationalStatus"
       response:
           value: 0
 
-    ### 2c Check equality with a tolerance between Target & Current for Lift
-    ### Depends on the FeatureMap
+    ######## StopMotion w/ Lift #######
+    ### Step 3x -> Verify StopMotion longer period effects on Lift
+    ### Mandatory/Optionality Depends on (PA & LF) for all 4x Steps
+
+    ### Read Current Position -> Store this value for step 4c
     - label:
-          "2c-1: If (PA & LF) TH reads TargetPositionLiftPercent100ths attribute
+          "3a: If (PA & LF) TH reads CurrentPositionLiftPercent100ths attribute
           from DUT"
-      disabled: true # Step applied conditionnally with an !expected response value
       command: "readAttribute"
-      attribute: "TargetPositionLiftPercent100ths"
+      attribute: "CurrentPositionLiftPercent100ths"
+      PICS: WNCV_LF && WNCV_PA_LF
       response:
+          saveAs: attrCurrentPositionLift
           constraints:
-              type: uint16
+              minValue: 0
+              maxValue: 10000
 
+    ### Read Target Position -> Compare this value w/ Current
+    ### Shall be tested as equals CurrentPositionLiftPercent100ths
     - label:
-          "2c-2: If (PA & LF) TH reads CurrentPositionLiftPercent100ths
-          attribute from DUT"
-      disabled: true # Step applied conditionnally with an !expected response value
+          "3b: If (PA & LF) TH reads TargetPositionLiftPercent100ths attribute
+           3c: it Must be equal with CurrentPositionLiftPercent100ths from DUT"
       command: "readAttribute"
-      attribute: "CurrentPositionLiftPercent100ths"
+      attribute: "TargetPositionLiftPercent100ths"
+      PICS: WNCV_LF && WNCV_PA_LF
       response:
-          constraints:
-              type: uint16
+          value: attrCurrentPositionLift
+
+    ######## StopMotion w/ Tilt #######
+    ### Step 4x -> Verify StopMotion longer period effects on Tilt
+    ### Mandatory/Optionality Depends on (PA & TL) for all 4x Steps
 
-    ### 2d Check equality with a tolerance between Target & Current for Tilt
-    ### Depends on the FeatureMap
+    ### Read Current Position -> Store this value for step 4c
     - label:
-          "2d-1: If (PA & TL) TH reads TargetPositionTiltPercent100ths attribute
+          "4a: If (PA & TL) TH reads CurrentPositionTiltPercent100ths attribute
           from DUT"
-      disabled: true # Step applied conditionnally with an !expected response value
       command: "readAttribute"
-      attribute: "TargetPositionTiltPercent100ths"
+      attribute: "CurrentPositionTiltPercent100ths"
+      PICS: WNCV_TL && WNCV_PA_TL
       response:
+          saveAs: attrCurrentPositionTilt
           constraints:
-              type: uint16
+              minValue: 0
+              maxValue: 10000
 
+    ### Read Target Position -> Compare this value w/ Current
+    ### Shall be tested as equals CurrentPositionTiltPercent100ths
     - label:
-          "2d-2: If (PA & TL) TH reads CurrentPositionTiltPercent100ths
-          attribute from DUT"
-      disabled: true # Step applied conditionnally with an !expected response value
+          "4b: If (PA & TL) TH reads TargetPositionTiltPercent100ths attribute
+           4c: it Must be equal with CurrentPositionTiltPercent100ths from DUT"
       command: "readAttribute"
-      attribute: "CurrentPositionTiltPercent100ths"
+      attribute: "TargetPositionTiltPercent100ths"
+      PICS: WNCV_TL && WNCV_PA_TL
       response:
-          constraints:
-              type: uint16
+          value: attrCurrentPositionTilt