Introduction of Verification Tool and RN2 uninstall script #1019

creas002 · 2024-07-20T14:12:54Z

Introduction of verification tool and RN2 uninstall script

The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning of capture/decode/processing of APT telemetry data.

Execute the verification script by passing the required argument [ quick | full ]

$HOME/raspberry-noaa-v2/scripts/tools/verification.sh

Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes)

Dryrun of binaries includes executing :

nxing web page returned 200 OK status to confirm Web Portal is up.
satdump live capture for 1 second to ensure it runs without error.
wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png
wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg
meteordemod -h is executed to ensure it runs without error.

When FULL mode is choosen meterdemod fully decodes a staged cadu file :

meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp

The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning f capture/decode/processing of APT telemetry data. Execute the verification script by passing the required argument [ quick | full ] $HOME/raspberry-noaa-v2/scripts/tools/verification.sh Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes) ######### # NOTES # ######### # Dryrun of binaries includes executing : nxing web page returned 200 OK status to confirm Web Portal is up. satdump live capture for 1 second to ensure it runs without error. wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg meteordemod -h is executed to ensure it runs without error. # When FULL mode is choosen meterdemod fully decodes a staged cadu file : meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp

Set 755 on verification.sh

Introduction of new Verification Tool

Reformatting Troubleshooting section from lastchange

…ry-noaa-v2 into aarch64-support

* Add toggle for coronal mass GIFs * aarch64 support Fixed typo in README Modified dependencies.yml to support 64-bit Predict and Satdump New script strach_perms.sh to correct /run/user/${UID} after reboot New script set_os_config_kernel8.sh to modify kernel so wxtoimg will run New DEB file for 64-bit predict New DEB file for 64-bit satdump * SatDump update for x64 machines * Modified tools & dependancies Modified dependancies in support of : wxtoimg libraries on ARM64 wxtoimg symbolic link for ARM64 predict on ARM64 Modified tasks in support of : wxtoimg kernel8 Fixing /run/user/uid permissions on reboot * Disabled - name: copy RTL-SDR udev rule We have an intermittant conflict from dualing UDEV rule files. They are identifical, but sometimes cause Satdump not to be able to open RTL-SDR receiver when executed as a non-root user. /usr/lib/udev/rules.d/60-librtlsdr0.rules is installed from OSMON's it clone RTL-SDR software" , which puts /lib/udev/rules.d/60-librtlsdr0.rules in place * rework * Added --fill_missing option to NOAA & METEOR receive scripts * undo "fill_missing" option from NOAA as its for GOES and METEOR only * Hmmm somehow `--fill_missing` got lost when I switched to SatDump live decoding * Adding updated SatDump for armhf built by Richard * Providing support for any Debian based distro * Setting automatic deletion to false to store 3 days worth of audio for archiving and debugging * Fixing the log for the breakpoint * Fixing the log for the break point * Preventing invalid receiver_type and satellite decoders from going past the install script * Adding fix to prevent Gtk-WARNING Modified schedule.sh to unset XTERM variables which would cause NOAA annotations to fail when passes were scheduled via VNC using lxterminal. * Widening the scope of variables to omit when scheduling passes * Added WAYFIRE to omit * Update receive_meteor.sh Backing out --fill_missing to avoid merge conflict with parent * Update receive_noaa.sh - Backing out changes to avoid merge conflict * add bottom - next/previous page in CAPTURE #1002 * Ooops... Thanks Jerome! * Updating comments * Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images. Example of warnings... UserWarning: marker is redundantly defined by the 'marker' keyword argument and the fmt string "o" (-> marker='o'). The keyword argument will take precedence. p.plot(az_at_max_elev, max_elev, 'o', marker="*", markersize=12, label="Max El") * Filter out wxtoimg error messages for known/acceptable issue Since the source code to WXTOIMG is not available I used gdc (w/o symbols) and strace and see what is causing the 'free invalid pointer' error. I determined that it happens on application clean up after successfully processing the map overlay file into the final image. Everything is working correctly except the clean up of a 3rd memory location which is failing because it was already removed by the kernel I believe. strace snippet: munmap(0xef6b8000, 20533248) = 0 munmap(0xee323000, 20533248) = 0 munmap(0xecf8e000, 20533248) = 0 writev(2, [{iov_base="free(): invalid pointer", iov_len=23}, {iov_base="\n", iov_len=1}], 2) = 24 The first two munmap calls worked and the third munmap fails as its already deallocated. The munmap() system call deletes the mappings for the specified address range, and causes further references to addresses within the range to generate invalid memory references. The region is also automatically unmapped when the process is terminated. On the other hand, closing the file descriptor does not unmap the region. At this point I'm happy to know it successfully allocated those memory slots for processing mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xef6b8000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xee323000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xecf8e000 but it was freeing up memory on the last address that it threw the error. This modification to receive_noaa.sh is to filter out the 'free invalid pointer' and 'Aborted' messages before its written out to the RN2 log * Filter out wxtoimg error messages for known/acceptable issue * Modified dependencies to support 32-bit wxtoimg on arm64 & amd64 * Modified core.yml to support various flavors of Linux * Removed wxtoimg 320bit support for AMD64 since we have a DEB for it already * Update README.md * Tuning Meteor M2-4 maps in MeteorDemod * Define XDG_RUNTIME_DIR with proper permissions Define XDG_RUNTIME_DIR with proper permissions * Introduction of Verification Tool and RN2 uninstall script (#1019) * Introduction of verification tool The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning f capture/decode/processing of APT telemetry data. Execute the verification script by passing the required argument [ quick | full ] $HOME/raspberry-noaa-v2/scripts/tools/verification.sh Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes) ######### # NOTES # ######### # Dryrun of binaries includes executing : nxing web page returned 200 OK status to confirm Web Portal is up. satdump live capture for 1 second to ensure it runs without error. wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg meteordemod -h is executed to ensure it runs without error. # When FULL mode is choosen meterdemod fully decodes a staged cadu file : meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp * Set 755 on verification.sh Set 755 on verification.sh * Ensure meteordemond working directory exists * Set 755 on build_permissions_list.sh * Update README.md Introduction of new Verification Tool * Update README.md Reformatting Troubleshooting section from lastchange * Update README.md * Script to remove RN2 installation * updated to shutdown nginx before removal * stop php service * Corrected php service name to stop when removing RN2 * further cleanup of services * Tweaked some of the logging messages * updated to remove rtl-sdr package * install script does not install RTL-SDR when it finds source in /tmp * Update caution_uninstall_rn2.sh * Clean up the library cache so any dangling items are cleared & RTL-SDR changes since it is not a APT installed package (#1020) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Delete db backup files that are older than 3 days * Removing old PHP thumbnail selection for Meteor (which didn't work) * Squashed commit of the following: commit 806663a Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:41:41 2024 -0400 Corrected variable name commit cd010e0 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:15:51 2024 -0400 Since verifcation tool is added to install script, conditionally execute from upgrade script commit 8c6ea4e Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 06:38:18 2024 -0400 Removed /etc/modprobe.d/rtlsdr.conf commit a5b7821 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 21:24:29 2024 -0400 Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. commit 3c50ae7 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:17:12 2024 -0400 Added error handling and Improved text in echo for moving RN2 tree commit b375303 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:07:59 2024 -0400 Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name commit 5552f61 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 12:03:14 2024 -0400 Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail commit edd0f4e Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:36:23 2024 -0400 Corrected /srv restore/Unstage permissions commit 7d91bd1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:18:53 2024 -0400 Script was renamed to rn2_uninstall.sh and moved to .rn2_utils commit 8c0c56d Merge: a007035 bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:49:02 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit a007035 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:48:21 2024 -0400 Added tee -a for appending to log file commit bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:27:38 2024 -0400 Resolve merge conflict commit a83fda3 Merge: acb9fc5 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:16:48 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit acb9fc5 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:14:45 2024 -0400 Script was rename to rn2_uninstall.sh and moved to .rm2_utils commit 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:08:22 2024 -0400 Update README.md - In-Situ Upgrade commit 4f97fae Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:55:59 2024 -0400 Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool commit b252da5 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:10:58 2024 -0400 Fix - DB Backup directory not cleaned up #1021 commit ad5555d Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 11:43:43 2024 -0400 RTL-SDR changes since it is not a APT installed package commit d967486 Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 09:22:53 2024 -0400 Clean up the library cache so any dangling items are cleared * Introduction of RN2 In-Situ Upgrade (#1024) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log to support.sh (#1028) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log --------- Co-authored-by: Sasszem <[email protected]> Co-authored-by: Richard Creasey - AI4Y <[email protected]> Co-authored-by: Jérôme <[email protected]>

* Add toggle for coronal mass GIFs * aarch64 support Fixed typo in README Modified dependencies.yml to support 64-bit Predict and Satdump New script strach_perms.sh to correct /run/user/${UID} after reboot New script set_os_config_kernel8.sh to modify kernel so wxtoimg will run New DEB file for 64-bit predict New DEB file for 64-bit satdump * SatDump update for x64 machines * Modified tools & dependancies Modified dependancies in support of : wxtoimg libraries on ARM64 wxtoimg symbolic link for ARM64 predict on ARM64 Modified tasks in support of : wxtoimg kernel8 Fixing /run/user/uid permissions on reboot * Disabled - name: copy RTL-SDR udev rule We have an intermittant conflict from dualing UDEV rule files. They are identifical, but sometimes cause Satdump not to be able to open RTL-SDR receiver when executed as a non-root user. /usr/lib/udev/rules.d/60-librtlsdr0.rules is installed from OSMON's it clone RTL-SDR software" , which puts /lib/udev/rules.d/60-librtlsdr0.rules in place * rework * Added --fill_missing option to NOAA & METEOR receive scripts * undo "fill_missing" option from NOAA as its for GOES and METEOR only * Hmmm somehow `--fill_missing` got lost when I switched to SatDump live decoding * Adding updated SatDump for armhf built by Richard * Providing support for any Debian based distro * Setting automatic deletion to false to store 3 days worth of audio for archiving and debugging * Fixing the log for the breakpoint * Fixing the log for the break point * Preventing invalid receiver_type and satellite decoders from going past the install script * Adding fix to prevent Gtk-WARNING Modified schedule.sh to unset XTERM variables which would cause NOAA annotations to fail when passes were scheduled via VNC using lxterminal. * Widening the scope of variables to omit when scheduling passes * Added WAYFIRE to omit * Update receive_meteor.sh Backing out --fill_missing to avoid merge conflict with parent * Update receive_noaa.sh - Backing out changes to avoid merge conflict * add bottom - next/previous page in CAPTURE #1002 * Ooops... Thanks Jerome! * Updating comments * Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images. Example of warnings... UserWarning: marker is redundantly defined by the 'marker' keyword argument and the fmt string "o" (-> marker='o'). The keyword argument will take precedence. p.plot(az_at_max_elev, max_elev, 'o', marker="*", markersize=12, label="Max El") * Filter out wxtoimg error messages for known/acceptable issue Since the source code to WXTOIMG is not available I used gdc (w/o symbols) and strace and see what is causing the 'free invalid pointer' error. I determined that it happens on application clean up after successfully processing the map overlay file into the final image. Everything is working correctly except the clean up of a 3rd memory location which is failing because it was already removed by the kernel I believe. strace snippet: munmap(0xef6b8000, 20533248) = 0 munmap(0xee323000, 20533248) = 0 munmap(0xecf8e000, 20533248) = 0 writev(2, [{iov_base="free(): invalid pointer", iov_len=23}, {iov_base="\n", iov_len=1}], 2) = 24 The first two munmap calls worked and the third munmap fails as its already deallocated. The munmap() system call deletes the mappings for the specified address range, and causes further references to addresses within the range to generate invalid memory references. The region is also automatically unmapped when the process is terminated. On the other hand, closing the file descriptor does not unmap the region. At this point I'm happy to know it successfully allocated those memory slots for processing mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xef6b8000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xee323000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xecf8e000 but it was freeing up memory on the last address that it threw the error. This modification to receive_noaa.sh is to filter out the 'free invalid pointer' and 'Aborted' messages before its written out to the RN2 log * Filter out wxtoimg error messages for known/acceptable issue * Modified dependencies to support 32-bit wxtoimg on arm64 & amd64 * Modified core.yml to support various flavors of Linux * Removed wxtoimg 320bit support for AMD64 since we have a DEB for it already * Update README.md * Tuning Meteor M2-4 maps in MeteorDemod * Define XDG_RUNTIME_DIR with proper permissions Define XDG_RUNTIME_DIR with proper permissions * Introduction of Verification Tool and RN2 uninstall script (#1019) * Introduction of verification tool The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning f capture/decode/processing of APT telemetry data. Execute the verification script by passing the required argument [ quick | full ] $HOME/raspberry-noaa-v2/scripts/tools/verification.sh Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes) ######### # NOTES # ######### # Dryrun of binaries includes executing : nxing web page returned 200 OK status to confirm Web Portal is up. satdump live capture for 1 second to ensure it runs without error. wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg meteordemod -h is executed to ensure it runs without error. # When FULL mode is choosen meterdemod fully decodes a staged cadu file : meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp * Set 755 on verification.sh Set 755 on verification.sh * Ensure meteordemond working directory exists * Set 755 on build_permissions_list.sh * Update README.md Introduction of new Verification Tool * Update README.md Reformatting Troubleshooting section from lastchange * Update README.md * Script to remove RN2 installation * updated to shutdown nginx before removal * stop php service * Corrected php service name to stop when removing RN2 * further cleanup of services * Tweaked some of the logging messages * updated to remove rtl-sdr package * install script does not install RTL-SDR when it finds source in /tmp * Update caution_uninstall_rn2.sh * Clean up the library cache so any dangling items are cleared & RTL-SDR changes since it is not a APT installed package (#1020) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Delete db backup files that are older than 3 days * fixes #1025 * integration for ELEKTRO-L3 * fix wrong log call * fix thumbnail * add missing section in noaa-v2.conf.js2 template * add ELEKTRO_L3_FREQ in common.sh * also show images of each channel, not only the composites --------- Co-authored-by: Sasszem <[email protected]> Co-authored-by: MihajloPi <[email protected]> Co-authored-by: Richard Creasey - AI4Y <[email protected]>

* Add toggle for coronal mass GIFs * aarch64 support Fixed typo in README Modified dependencies.yml to support 64-bit Predict and Satdump New script strach_perms.sh to correct /run/user/${UID} after reboot New script set_os_config_kernel8.sh to modify kernel so wxtoimg will run New DEB file for 64-bit predict New DEB file for 64-bit satdump * SatDump update for x64 machines * Modified tools & dependancies Modified dependancies in support of : wxtoimg libraries on ARM64 wxtoimg symbolic link for ARM64 predict on ARM64 Modified tasks in support of : wxtoimg kernel8 Fixing /run/user/uid permissions on reboot * Disabled - name: copy RTL-SDR udev rule We have an intermittant conflict from dualing UDEV rule files. They are identifical, but sometimes cause Satdump not to be able to open RTL-SDR receiver when executed as a non-root user. /usr/lib/udev/rules.d/60-librtlsdr0.rules is installed from OSMON's it clone RTL-SDR software" , which puts /lib/udev/rules.d/60-librtlsdr0.rules in place * rework * Added --fill_missing option to NOAA & METEOR receive scripts * undo "fill_missing" option from NOAA as its for GOES and METEOR only * Hmmm somehow `--fill_missing` got lost when I switched to SatDump live decoding * Adding updated SatDump for armhf built by Richard * Providing support for any Debian based distro * Setting automatic deletion to false to store 3 days worth of audio for archiving and debugging * Fixing the log for the breakpoint * Fixing the log for the break point * Preventing invalid receiver_type and satellite decoders from going past the install script * Adding fix to prevent Gtk-WARNING Modified schedule.sh to unset XTERM variables which would cause NOAA annotations to fail when passes were scheduled via VNC using lxterminal. * Widening the scope of variables to omit when scheduling passes * Added WAYFIRE to omit * Update receive_meteor.sh Backing out --fill_missing to avoid merge conflict with parent * Update receive_noaa.sh - Backing out changes to avoid merge conflict * add bottom - next/previous page in CAPTURE #1002 * Ooops... Thanks Jerome! * Updating comments * Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images. Example of warnings... UserWarning: marker is redundantly defined by the 'marker' keyword argument and the fmt string "o" (-> marker='o'). The keyword argument will take precedence. p.plot(az_at_max_elev, max_elev, 'o', marker="*", markersize=12, label="Max El") * Filter out wxtoimg error messages for known/acceptable issue Since the source code to WXTOIMG is not available I used gdc (w/o symbols) and strace and see what is causing the 'free invalid pointer' error. I determined that it happens on application clean up after successfully processing the map overlay file into the final image. Everything is working correctly except the clean up of a 3rd memory location which is failing because it was already removed by the kernel I believe. strace snippet: munmap(0xef6b8000, 20533248) = 0 munmap(0xee323000, 20533248) = 0 munmap(0xecf8e000, 20533248) = 0 writev(2, [{iov_base="free(): invalid pointer", iov_len=23}, {iov_base="\n", iov_len=1}], 2) = 24 The first two munmap calls worked and the third munmap fails as its already deallocated. The munmap() system call deletes the mappings for the specified address range, and causes further references to addresses within the range to generate invalid memory references. The region is also automatically unmapped when the process is terminated. On the other hand, closing the file descriptor does not unmap the region. At this point I'm happy to know it successfully allocated those memory slots for processing mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xef6b8000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xee323000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xecf8e000 but it was freeing up memory on the last address that it threw the error. This modification to receive_noaa.sh is to filter out the 'free invalid pointer' and 'Aborted' messages before its written out to the RN2 log * Filter out wxtoimg error messages for known/acceptable issue * Modified dependencies to support 32-bit wxtoimg on arm64 & amd64 * Modified core.yml to support various flavors of Linux * Removed wxtoimg 320bit support for AMD64 since we have a DEB for it already * Update README.md * Tuning Meteor M2-4 maps in MeteorDemod * Define XDG_RUNTIME_DIR with proper permissions Define XDG_RUNTIME_DIR with proper permissions * Introduction of Verification Tool and RN2 uninstall script (#1019) * Introduction of verification tool The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning f capture/decode/processing of APT telemetry data. Execute the verification script by passing the required argument [ quick | full ] $HOME/raspberry-noaa-v2/scripts/tools/verification.sh Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes) ######### # NOTES # ######### # Dryrun of binaries includes executing : nxing web page returned 200 OK status to confirm Web Portal is up. satdump live capture for 1 second to ensure it runs without error. wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg meteordemod -h is executed to ensure it runs without error. # When FULL mode is choosen meterdemod fully decodes a staged cadu file : meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp * Set 755 on verification.sh Set 755 on verification.sh * Ensure meteordemond working directory exists * Set 755 on build_permissions_list.sh * Update README.md Introduction of new Verification Tool * Update README.md Reformatting Troubleshooting section from lastchange * Update README.md * Script to remove RN2 installation * updated to shutdown nginx before removal * stop php service * Corrected php service name to stop when removing RN2 * further cleanup of services * Tweaked some of the logging messages * updated to remove rtl-sdr package * install script does not install RTL-SDR when it finds source in /tmp * Update caution_uninstall_rn2.sh * Clean up the library cache so any dangling items are cleared & RTL-SDR changes since it is not a APT installed package (#1020) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Delete db backup files that are older than 3 days * Removing old PHP thumbnail selection for Meteor (which didn't work) * Squashed commit of the following: commit 806663a Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:41:41 2024 -0400 Corrected variable name commit cd010e0 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:15:51 2024 -0400 Since verifcation tool is added to install script, conditionally execute from upgrade script commit 8c6ea4e Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 06:38:18 2024 -0400 Removed /etc/modprobe.d/rtlsdr.conf commit a5b7821 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 21:24:29 2024 -0400 Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. commit 3c50ae7 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:17:12 2024 -0400 Added error handling and Improved text in echo for moving RN2 tree commit b375303 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:07:59 2024 -0400 Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name commit 5552f61 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 12:03:14 2024 -0400 Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail commit edd0f4e Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:36:23 2024 -0400 Corrected /srv restore/Unstage permissions commit 7d91bd1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:18:53 2024 -0400 Script was renamed to rn2_uninstall.sh and moved to .rn2_utils commit 8c0c56d Merge: a007035 bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:49:02 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit a007035 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:48:21 2024 -0400 Added tee -a for appending to log file commit bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:27:38 2024 -0400 Resolve merge conflict commit a83fda3 Merge: acb9fc5 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:16:48 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit acb9fc5 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:14:45 2024 -0400 Script was rename to rn2_uninstall.sh and moved to .rm2_utils commit 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:08:22 2024 -0400 Update README.md - In-Situ Upgrade commit 4f97fae Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:55:59 2024 -0400 Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool commit b252da5 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:10:58 2024 -0400 Fix - DB Backup directory not cleaned up #1021 commit ad5555d Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 11:43:43 2024 -0400 RTL-SDR changes since it is not a APT installed package commit d967486 Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 09:22:53 2024 -0400 Clean up the library cache so any dangling items are cleared * Introduction of RN2 In-Situ Upgrade (#1024) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log to support.sh (#1028) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log * Sunsetting legacy Debian 32 bit and Debian 64 bit support * aarch64 support (#1031) * Add toggle for coronal mass GIFs * aarch64 support Fixed typo in README Modified dependencies.yml to support 64-bit Predict and Satdump New script strach_perms.sh to correct /run/user/${UID} after reboot New script set_os_config_kernel8.sh to modify kernel so wxtoimg will run New DEB file for 64-bit predict New DEB file for 64-bit satdump * SatDump update for x64 machines * Modified tools & dependancies Modified dependancies in support of : wxtoimg libraries on ARM64 wxtoimg symbolic link for ARM64 predict on ARM64 Modified tasks in support of : wxtoimg kernel8 Fixing /run/user/uid permissions on reboot * Disabled - name: copy RTL-SDR udev rule We have an intermittant conflict from dualing UDEV rule files. They are identifical, but sometimes cause Satdump not to be able to open RTL-SDR receiver when executed as a non-root user. /usr/lib/udev/rules.d/60-librtlsdr0.rules is installed from OSMON's it clone RTL-SDR software" , which puts /lib/udev/rules.d/60-librtlsdr0.rules in place * rework * Added --fill_missing option to NOAA & METEOR receive scripts * undo "fill_missing" option from NOAA as its for GOES and METEOR only * Hmmm somehow `--fill_missing` got lost when I switched to SatDump live decoding * Adding updated SatDump for armhf built by Richard * Providing support for any Debian based distro * Setting automatic deletion to false to store 3 days worth of audio for archiving and debugging * Fixing the log for the breakpoint * Fixing the log for the break point * Preventing invalid receiver_type and satellite decoders from going past the install script * Adding fix to prevent Gtk-WARNING Modified schedule.sh to unset XTERM variables which would cause NOAA annotations to fail when passes were scheduled via VNC using lxterminal. * Widening the scope of variables to omit when scheduling passes * Added WAYFIRE to omit * Update receive_meteor.sh Backing out --fill_missing to avoid merge conflict with parent * Update receive_noaa.sh - Backing out changes to avoid merge conflict * add bottom - next/previous page in CAPTURE #1002 * Ooops... Thanks Jerome! * Updating comments * Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images. Example of warnings... UserWarning: marker is redundantly defined by the 'marker' keyword argument and the fmt string "o" (-> marker='o'). The keyword argument will take precedence. p.plot(az_at_max_elev, max_elev, 'o', marker="*", markersize=12, label="Max El") * Filter out wxtoimg error messages for known/acceptable issue Since the source code to WXTOIMG is not available I used gdc (w/o symbols) and strace and see what is causing the 'free invalid pointer' error. I determined that it happens on application clean up after successfully processing the map overlay file into the final image. Everything is working correctly except the clean up of a 3rd memory location which is failing because it was already removed by the kernel I believe. strace snippet: munmap(0xef6b8000, 20533248) = 0 munmap(0xee323000, 20533248) = 0 munmap(0xecf8e000, 20533248) = 0 writev(2, [{iov_base="free(): invalid pointer", iov_len=23}, {iov_base="\n", iov_len=1}], 2) = 24 The first two munmap calls worked and the third munmap fails as its already deallocated. The munmap() system call deletes the mappings for the specified address range, and causes further references to addresses within the range to generate invalid memory references. The region is also automatically unmapped when the process is terminated. On the other hand, closing the file descriptor does not unmap the region. At this point I'm happy to know it successfully allocated those memory slots for processing mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xef6b8000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xee323000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xecf8e000 but it was freeing up memory on the last address that it threw the error. This modification to receive_noaa.sh is to filter out the 'free invalid pointer' and 'Aborted' messages before its written out to the RN2 log * Filter out wxtoimg error messages for known/acceptable issue * Modified dependencies to support 32-bit wxtoimg on arm64 & amd64 * Modified core.yml to support various flavors of Linux * Removed wxtoimg 320bit support for AMD64 since we have a DEB for it already * Update README.md * Tuning Meteor M2-4 maps in MeteorDemod * Define XDG_RUNTIME_DIR with proper permissions Define XDG_RUNTIME_DIR with proper permissions * Introduction of Verification Tool and RN2 uninstall script (#1019) * Introduction of verification tool The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning f capture/decode/processing of APT telemetry data. Execute the verification script by passing the required argument [ quick | full ] $HOME/raspberry-noaa-v2/scripts/tools/verification.sh Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes) ######### # NOTES # ######### # Dryrun of binaries includes executing : nxing web page returned 200 OK status to confirm Web Portal is up. satdump live capture for 1 second to ensure it runs without error. wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg meteordemod -h is executed to ensure it runs without error. # When FULL mode is choosen meterdemod fully decodes a staged cadu file : meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp * Set 755 on verification.sh Set 755 on verification.sh * Ensure meteordemond working directory exists * Set 755 on build_permissions_list.sh * Update README.md Introduction of new Verification Tool * Update README.md Reformatting Troubleshooting section from lastchange * Update README.md * Script to remove RN2 installation * updated to shutdown nginx before removal * stop php service * Corrected php service name to stop when removing RN2 * further cleanup of services * Tweaked some of the logging messages * updated to remove rtl-sdr package * install script does not install RTL-SDR when it finds source in /tmp * Update caution_uninstall_rn2.sh * Clean up the library cache so any dangling items are cleared & RTL-SDR changes since it is not a APT installed package (#1020) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Delete db backup files that are older than 3 days * Removing old PHP thumbnail selection for Meteor (which didn't work) * Squashed commit of the following: commit 806663a Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:41:41 2024 -0400 Corrected variable name commit cd010e0 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:15:51 2024 -0400 Since verifcation tool is added to install script, conditionally execute from upgrade script commit 8c6ea4e Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 06:38:18 2024 -0400 Removed /etc/modprobe.d/rtlsdr.conf commit a5b7821 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 21:24:29 2024 -0400 Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. commit 3c50ae7 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:17:12 2024 -0400 Added error handling and Improved text in echo for moving RN2 tree commit b375303 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:07:59 2024 -0400 Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name commit 5552f61 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 12:03:14 2024 -0400 Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail commit edd0f4e Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:36:23 2024 -0400 Corrected /srv restore/Unstage permissions commit 7d91bd1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:18:53 2024 -0400 Script was renamed to rn2_uninstall.sh and moved to .rn2_utils commit 8c0c56d Merge: a007035 bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:49:02 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit a007035 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:48:21 2024 -0400 Added tee -a for appending to log file commit bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:27:38 2024 -0400 Resolve merge conflict commit a83fda3 Merge: acb9fc5 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:16:48 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit acb9fc5 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:14:45 2024 -0400 Script was rename to rn2_uninstall.sh and moved to .rm2_utils commit 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:08:22 2024 -0400 Update README.md - In-Situ Upgrade commit 4f97fae Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:55:59 2024 -0400 Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool commit b252da5 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:10:58 2024 -0400 Fix - DB Backup directory not cleaned up #1021 commit ad5555d Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 11:43:43 2024 -0400 RTL-SDR changes since it is not a APT installed package commit d967486 Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 09:22:53 2024 -0400 Clean up the library cache so any dangling items are cleared * Introduction of RN2 In-Situ Upgrade (#1024) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log to support.sh (#1028) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log --------- Co-authored-by: Sasszem <[email protected]> Co-authored-by: Richard Creasey - AI4Y <[email protected]> Co-authored-by: Jérôme <[email protected]> * Rebooting the Pi automatically after the first install * Fixing filling issue for Meteor when decoding with SatDump --------- Co-authored-by: Sasszem <[email protected]> Co-authored-by: Richard Creasey - AI4Y <[email protected]> Co-authored-by: Jérôme <[email protected]>

* Add toggle for coronal mass GIFs * aarch64 support Fixed typo in README Modified dependencies.yml to support 64-bit Predict and Satdump New script strach_perms.sh to correct /run/user/${UID} after reboot New script set_os_config_kernel8.sh to modify kernel so wxtoimg will run New DEB file for 64-bit predict New DEB file for 64-bit satdump * SatDump update for x64 machines * Modified tools & dependancies Modified dependancies in support of : wxtoimg libraries on ARM64 wxtoimg symbolic link for ARM64 predict on ARM64 Modified tasks in support of : wxtoimg kernel8 Fixing /run/user/uid permissions on reboot * Disabled - name: copy RTL-SDR udev rule We have an intermittant conflict from dualing UDEV rule files. They are identifical, but sometimes cause Satdump not to be able to open RTL-SDR receiver when executed as a non-root user. /usr/lib/udev/rules.d/60-librtlsdr0.rules is installed from OSMON's it clone RTL-SDR software" , which puts /lib/udev/rules.d/60-librtlsdr0.rules in place * rework * Added --fill_missing option to NOAA & METEOR receive scripts * undo "fill_missing" option from NOAA as its for GOES and METEOR only * Hmmm somehow `--fill_missing` got lost when I switched to SatDump live decoding * Adding updated SatDump for armhf built by Richard * Providing support for any Debian based distro * Setting automatic deletion to false to store 3 days worth of audio for archiving and debugging * Fixing the log for the breakpoint * Fixing the log for the break point * Preventing invalid receiver_type and satellite decoders from going past the install script * Adding fix to prevent Gtk-WARNING Modified schedule.sh to unset XTERM variables which would cause NOAA annotations to fail when passes were scheduled via VNC using lxterminal. * Widening the scope of variables to omit when scheduling passes * Added WAYFIRE to omit * Update receive_meteor.sh Backing out --fill_missing to avoid merge conflict with parent * Update receive_noaa.sh - Backing out changes to avoid merge conflict * add bottom - next/previous page in CAPTURE #1002 * Ooops... Thanks Jerome! * Updating comments * Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images. Example of warnings... UserWarning: marker is redundantly defined by the 'marker' keyword argument and the fmt string "o" (-> marker='o'). The keyword argument will take precedence. p.plot(az_at_max_elev, max_elev, 'o', marker="*", markersize=12, label="Max El") * Filter out wxtoimg error messages for known/acceptable issue Since the source code to WXTOIMG is not available I used gdc (w/o symbols) and strace and see what is causing the 'free invalid pointer' error. I determined that it happens on application clean up after successfully processing the map overlay file into the final image. Everything is working correctly except the clean up of a 3rd memory location which is failing because it was already removed by the kernel I believe. strace snippet: munmap(0xef6b8000, 20533248) = 0 munmap(0xee323000, 20533248) = 0 munmap(0xecf8e000, 20533248) = 0 writev(2, [{iov_base="free(): invalid pointer", iov_len=23}, {iov_base="\n", iov_len=1}], 2) = 24 The first two munmap calls worked and the third munmap fails as its already deallocated. The munmap() system call deletes the mappings for the specified address range, and causes further references to addresses within the range to generate invalid memory references. The region is also automatically unmapped when the process is terminated. On the other hand, closing the file descriptor does not unmap the region. At this point I'm happy to know it successfully allocated those memory slots for processing mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xef6b8000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xee323000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xecf8e000 but it was freeing up memory on the last address that it threw the error. This modification to receive_noaa.sh is to filter out the 'free invalid pointer' and 'Aborted' messages before its written out to the RN2 log * Filter out wxtoimg error messages for known/acceptable issue * Modified dependencies to support 32-bit wxtoimg on arm64 & amd64 * Modified core.yml to support various flavors of Linux * Removed wxtoimg 320bit support for AMD64 since we have a DEB for it already * Update README.md * Tuning Meteor M2-4 maps in MeteorDemod * Define XDG_RUNTIME_DIR with proper permissions Define XDG_RUNTIME_DIR with proper permissions * Introduction of Verification Tool and RN2 uninstall script (#1019) * Introduction of verification tool The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning f capture/decode/processing of APT telemetry data. Execute the verification script by passing the required argument [ quick | full ] $HOME/raspberry-noaa-v2/scripts/tools/verification.sh Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes) ######### # NOTES # ######### # Dryrun of binaries includes executing : nxing web page returned 200 OK status to confirm Web Portal is up. satdump live capture for 1 second to ensure it runs without error. wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg meteordemod -h is executed to ensure it runs without error. # When FULL mode is choosen meterdemod fully decodes a staged cadu file : meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp * Set 755 on verification.sh Set 755 on verification.sh * Ensure meteordemond working directory exists * Set 755 on build_permissions_list.sh * Update README.md Introduction of new Verification Tool * Update README.md Reformatting Troubleshooting section from lastchange * Update README.md * Script to remove RN2 installation * updated to shutdown nginx before removal * stop php service * Corrected php service name to stop when removing RN2 * further cleanup of services * Tweaked some of the logging messages * updated to remove rtl-sdr package * install script does not install RTL-SDR when it finds source in /tmp * Update caution_uninstall_rn2.sh * Clean up the library cache so any dangling items are cleared & RTL-SDR changes since it is not a APT installed package (#1020) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Delete db backup files that are older than 3 days * Removing old PHP thumbnail selection for Meteor (which didn't work) * Squashed commit of the following: commit 806663a Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:41:41 2024 -0400 Corrected variable name commit cd010e0 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:15:51 2024 -0400 Since verifcation tool is added to install script, conditionally execute from upgrade script commit 8c6ea4e Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 06:38:18 2024 -0400 Removed /etc/modprobe.d/rtlsdr.conf commit a5b7821 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 21:24:29 2024 -0400 Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. commit 3c50ae7 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:17:12 2024 -0400 Added error handling and Improved text in echo for moving RN2 tree commit b375303 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:07:59 2024 -0400 Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name commit 5552f61 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 12:03:14 2024 -0400 Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail commit edd0f4e Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:36:23 2024 -0400 Corrected /srv restore/Unstage permissions commit 7d91bd1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:18:53 2024 -0400 Script was renamed to rn2_uninstall.sh and moved to .rn2_utils commit 8c0c56d Merge: a007035 bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:49:02 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit a007035 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:48:21 2024 -0400 Added tee -a for appending to log file commit bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:27:38 2024 -0400 Resolve merge conflict commit a83fda3 Merge: acb9fc5 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:16:48 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit acb9fc5 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:14:45 2024 -0400 Script was rename to rn2_uninstall.sh and moved to .rm2_utils commit 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:08:22 2024 -0400 Update README.md - In-Situ Upgrade commit 4f97fae Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:55:59 2024 -0400 Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool commit b252da5 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:10:58 2024 -0400 Fix - DB Backup directory not cleaned up #1021 commit ad5555d Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 11:43:43 2024 -0400 RTL-SDR changes since it is not a APT installed package commit d967486 Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 09:22:53 2024 -0400 Clean up the library cache so any dangling items are cleared * Introduction of RN2 In-Situ Upgrade (#1024) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log to support.sh (#1028) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log * Sunsetting legacy Debian 32 bit and Debian 64 bit support * aarch64 support (#1031) * Add toggle for coronal mass GIFs * aarch64 support Fixed typo in README Modified dependencies.yml to support 64-bit Predict and Satdump New script strach_perms.sh to correct /run/user/${UID} after reboot New script set_os_config_kernel8.sh to modify kernel so wxtoimg will run New DEB file for 64-bit predict New DEB file for 64-bit satdump * SatDump update for x64 machines * Modified tools & dependancies Modified dependancies in support of : wxtoimg libraries on ARM64 wxtoimg symbolic link for ARM64 predict on ARM64 Modified tasks in support of : wxtoimg kernel8 Fixing /run/user/uid permissions on reboot * Disabled - name: copy RTL-SDR udev rule We have an intermittant conflict from dualing UDEV rule files. They are identifical, but sometimes cause Satdump not to be able to open RTL-SDR receiver when executed as a non-root user. /usr/lib/udev/rules.d/60-librtlsdr0.rules is installed from OSMON's it clone RTL-SDR software" , which puts /lib/udev/rules.d/60-librtlsdr0.rules in place * rework * Added --fill_missing option to NOAA & METEOR receive scripts * undo "fill_missing" option from NOAA as its for GOES and METEOR only * Hmmm somehow `--fill_missing` got lost when I switched to SatDump live decoding * Adding updated SatDump for armhf built by Richard * Providing support for any Debian based distro * Setting automatic deletion to false to store 3 days worth of audio for archiving and debugging * Fixing the log for the breakpoint * Fixing the log for the break point * Preventing invalid receiver_type and satellite decoders from going past the install script * Adding fix to prevent Gtk-WARNING Modified schedule.sh to unset XTERM variables which would cause NOAA annotations to fail when passes were scheduled via VNC using lxterminal. * Widening the scope of variables to omit when scheduling passes * Added WAYFIRE to omit * Update receive_meteor.sh Backing out --fill_missing to avoid merge conflict with parent * Update receive_noaa.sh - Backing out changes to avoid merge conflict * add bottom - next/previous page in CAPTURE #1002 * Ooops... Thanks Jerome! * Updating comments * Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images. Example of warnings... UserWarning: marker is redundantly defined by the 'marker' keyword argument and the fmt string "o" (-> marker='o'). The keyword argument will take precedence. p.plot(az_at_max_elev, max_elev, 'o', marker="*", markersize=12, label="Max El") * Filter out wxtoimg error messages for known/acceptable issue Since the source code to WXTOIMG is not available I used gdc (w/o symbols) and strace and see what is causing the 'free invalid pointer' error. I determined that it happens on application clean up after successfully processing the map overlay file into the final image. Everything is working correctly except the clean up of a 3rd memory location which is failing because it was already removed by the kernel I believe. strace snippet: munmap(0xef6b8000, 20533248) = 0 munmap(0xee323000, 20533248) = 0 munmap(0xecf8e000, 20533248) = 0 writev(2, [{iov_base="free(): invalid pointer", iov_len=23}, {iov_base="\n", iov_len=1}], 2) = 24 The first two munmap calls worked and the third munmap fails as its already deallocated. The munmap() system call deletes the mappings for the specified address range, and causes further references to addresses within the range to generate invalid memory references. The region is also automatically unmapped when the process is terminated. On the other hand, closing the file descriptor does not unmap the region. At this point I'm happy to know it successfully allocated those memory slots for processing mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xef6b8000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xee323000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xecf8e000 but it was freeing up memory on the last address that it threw the error. This modification to receive_noaa.sh is to filter out the 'free invalid pointer' and 'Aborted' messages before its written out to the RN2 log * Filter out wxtoimg error messages for known/acceptable issue * Modified dependencies to support 32-bit wxtoimg on arm64 & amd64 * Modified core.yml to support various flavors of Linux * Removed wxtoimg 320bit support for AMD64 since we have a DEB for it already * Update README.md * Tuning Meteor M2-4 maps in MeteorDemod * Define XDG_RUNTIME_DIR with proper permissions Define XDG_RUNTIME_DIR with proper permissions * Introduction of Verification Tool and RN2 uninstall script (#1019) * Introduction of verification tool The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning f capture/decode/processing of APT telemetry data. Execute the verification script by passing the required argument [ quick | full ] $HOME/raspberry-noaa-v2/scripts/tools/verification.sh Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes) ######### # NOTES # ######### # Dryrun of binaries includes executing : nxing web page returned 200 OK status to confirm Web Portal is up. satdump live capture for 1 second to ensure it runs without error. wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg meteordemod -h is executed to ensure it runs without error. # When FULL mode is choosen meterdemod fully decodes a staged cadu file : meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp * Set 755 on verification.sh Set 755 on verification.sh * Ensure meteordemond working directory exists * Set 755 on build_permissions_list.sh * Update README.md Introduction of new Verification Tool * Update README.md Reformatting Troubleshooting section from lastchange * Update README.md * Script to remove RN2 installation * updated to shutdown nginx before removal * stop php service * Corrected php service name to stop when removing RN2 * further cleanup of services * Tweaked some of the logging messages * updated to remove rtl-sdr package * install script does not install RTL-SDR when it finds source in /tmp * Update caution_uninstall_rn2.sh * Clean up the library cache so any dangling items are cleared & RTL-SDR changes since it is not a APT installed package (#1020) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Delete db backup files that are older than 3 days * Removing old PHP thumbnail selection for Meteor (which didn't work) * Squashed commit of the following: commit 806663a Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:41:41 2024 -0400 Corrected variable name commit cd010e0 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:15:51 2024 -0400 Since verifcation tool is added to install script, conditionally execute from upgrade script commit 8c6ea4e Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 06:38:18 2024 -0400 Removed /etc/modprobe.d/rtlsdr.conf commit a5b7821 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 21:24:29 2024 -0400 Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. commit 3c50ae7 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:17:12 2024 -0400 Added error handling and Improved text in echo for moving RN2 tree commit b375303 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:07:59 2024 -0400 Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name commit 5552f61 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 12:03:14 2024 -0400 Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail commit edd0f4e Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:36:23 2024 -0400 Corrected /srv restore/Unstage permissions commit 7d91bd1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:18:53 2024 -0400 Script was renamed to rn2_uninstall.sh and moved to .rn2_utils commit 8c0c56d Merge: a007035 bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:49:02 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit a007035 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:48:21 2024 -0400 Added tee -a for appending to log file commit bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:27:38 2024 -0400 Resolve merge conflict commit a83fda3 Merge: acb9fc5 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:16:48 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit acb9fc5 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:14:45 2024 -0400 Script was rename to rn2_uninstall.sh and moved to .rm2_utils commit 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:08:22 2024 -0400 Update README.md - In-Situ Upgrade commit 4f97fae Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:55:59 2024 -0400 Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool commit b252da5 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:10:58 2024 -0400 Fix - DB Backup directory not cleaned up #1021 commit ad5555d Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 11:43:43 2024 -0400 RTL-SDR changes since it is not a APT installed package commit d967486 Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 09:22:53 2024 -0400 Clean up the library cache so any dangling items are cleared * Introduction of RN2 In-Situ Upgrade (#1024) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log to support.sh (#1028) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log --------- Co-authored-by: Sasszem <[email protected]> Co-authored-by: Richard Creasey - AI4Y <[email protected]> Co-authored-by: Jérôme <[email protected]> * Rebooting the Pi automatically after the first install * Fixing filling issue for Meteor when decoding with SatDump * Update README.md (#1037) * Update core.yml - Simply getting OS Release (#1038) Update core.yml - Simply getting OS Release Goal was to work on as many as Debian Distro's as possible even if they are using local repo's --------- Co-authored-by: Sasszem <[email protected]> Co-authored-by: Richard Creasey - AI4Y <[email protected]> Co-authored-by: Jérôme <[email protected]>

…d many more. (#1070) * Add toggle for coronal mass GIFs * aarch64 support Fixed typo in README Modified dependencies.yml to support 64-bit Predict and Satdump New script strach_perms.sh to correct /run/user/${UID} after reboot New script set_os_config_kernel8.sh to modify kernel so wxtoimg will run New DEB file for 64-bit predict New DEB file for 64-bit satdump * SatDump update for x64 machines * Modified tools & dependancies Modified dependancies in support of : wxtoimg libraries on ARM64 wxtoimg symbolic link for ARM64 predict on ARM64 Modified tasks in support of : wxtoimg kernel8 Fixing /run/user/uid permissions on reboot * Disabled - name: copy RTL-SDR udev rule We have an intermittant conflict from dualing UDEV rule files. They are identifical, but sometimes cause Satdump not to be able to open RTL-SDR receiver when executed as a non-root user. /usr/lib/udev/rules.d/60-librtlsdr0.rules is installed from OSMON's it clone RTL-SDR software" , which puts /lib/udev/rules.d/60-librtlsdr0.rules in place * rework * Added --fill_missing option to NOAA & METEOR receive scripts * undo "fill_missing" option from NOAA as its for GOES and METEOR only * Hmmm somehow `--fill_missing` got lost when I switched to SatDump live decoding * Adding updated SatDump for armhf built by Richard * Providing support for any Debian based distro * Setting automatic deletion to false to store 3 days worth of audio for archiving and debugging * Fixing the log for the breakpoint * Fixing the log for the break point * Preventing invalid receiver_type and satellite decoders from going past the install script * Adding fix to prevent Gtk-WARNING Modified schedule.sh to unset XTERM variables which would cause NOAA annotations to fail when passes were scheduled via VNC using lxterminal. * Widening the scope of variables to omit when scheduling passes * Added WAYFIRE to omit * Update receive_meteor.sh Backing out --fill_missing to avoid merge conflict with parent * Update receive_noaa.sh - Backing out changes to avoid merge conflict * add bottom - next/previous page in CAPTURE https://github.com/jekhokie/raspberry-noaa-v2/issues/1002 * Ooops... Thanks Jerome! * Updating comments * Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images. Example of warnings... UserWarning: marker is redundantly defined by the 'marker' keyword argument and the fmt string "o" (-> marker='o'). The keyword argument will take precedence. p.plot(az_at_max_elev, max_elev, 'o', marker="*", markersize=12, label="Max El") * Filter out wxtoimg error messages for known/acceptable issue Since the source code to WXTOIMG is not available I used gdc (w/o symbols) and strace and see what is causing the 'free invalid pointer' error. I determined that it happens on application clean up after successfully processing the map overlay file into the final image. Everything is working correctly except the clean up of a 3rd memory location which is failing because it was already removed by the kernel I believe. strace snippet: munmap(0xef6b8000, 20533248) = 0 munmap(0xee323000, 20533248) = 0 munmap(0xecf8e000, 20533248) = 0 writev(2, [{iov_base="free(): invalid pointer", iov_len=23}, {iov_base="\n", iov_len=1}], 2) = 24 The first two munmap calls worked and the third munmap fails as its already deallocated. The munmap() system call deletes the mappings for the specified address range, and causes further references to addresses within the range to generate invalid memory references. The region is also automatically unmapped when the process is terminated. On the other hand, closing the file descriptor does not unmap the region. At this point I'm happy to know it successfully allocated those memory slots for processing mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xef6b8000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xee323000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xecf8e000 but it was freeing up memory on the last address that it threw the error. This modification to receive_noaa.sh is to filter out the 'free invalid pointer' and 'Aborted' messages before its written out to the RN2 log * Filter out wxtoimg error messages for known/acceptable issue * Modified dependencies to support 32-bit wxtoimg on arm64 & amd64 * Modified core.yml to support various flavors of Linux * Removed wxtoimg 320bit support for AMD64 since we have a DEB for it already * Update README.md * Tuning Meteor M2-4 maps in MeteorDemod * Define XDG_RUNTIME_DIR with proper permissions Define XDG_RUNTIME_DIR with proper permissions * Introduction of Verification Tool and RN2 uninstall script (#1019) * Introduction of verification tool The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning f capture/decode/processing of APT telemetry data. Execute the verification script by passing the required argument [ quick | full ] $HOME/raspberry-noaa-v2/scripts/tools/verification.sh Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes) ######### # NOTES # ######### # Dryrun of binaries includes executing : nxing web page returned 200 OK status to confirm Web Portal is up. satdump live capture for 1 second to ensure it runs without error. wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg meteordemod -h is executed to ensure it runs without error. # When FULL mode is choosen meterdemod fully decodes a staged cadu file : meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp * Set 755 on verification.sh Set 755 on verification.sh * Ensure meteordemond working directory exists * Set 755 on build_permissions_list.sh * Update README.md Introduction of new Verification Tool * Update README.md Reformatting Troubleshooting section from lastchange * Update README.md * Script to remove RN2 installation * updated to shutdown nginx before removal * stop php service * Corrected php service name to stop when removing RN2 * further cleanup of services * Tweaked some of the logging messages * updated to remove rtl-sdr package * install script does not install RTL-SDR when it finds source in /tmp * Update caution_uninstall_rn2.sh * Clean up the library cache so any dangling items are cleared & RTL-SDR changes since it is not a APT installed package (#1020) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Delete db backup files that are older than 3 days * Removing old PHP thumbnail selection for Meteor (which didn't work) * Squashed commit of the following: commit 806663a83a01c91a74f214a15d9b2d7b2500f1e7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:41:41 2024 -0400 Corrected variable name commit cd010e0053f8dbe32421e65bd12dae501f879978 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:15:51 2024 -0400 Since verifcation tool is added to install script, conditionally execute from upgrade script commit 8c6ea4e755f5ff469b1463eacb10f6a5f9cb70b7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 06:38:18 2024 -0400 Removed /etc/modprobe.d/rtlsdr.conf commit a5b7821479bf74f9b7c0d0a67998424fde30e642 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 21:24:29 2024 -0400 Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. commit 3c50ae76316a823174ced50e0d68c1bbf2189949 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:17:12 2024 -0400 Added error handling and Improved text in echo for moving RN2 tree commit b375303f75d62f22d852cfd18162fc9bebe1fcdd Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:07:59 2024 -0400 Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name commit 5552f61a62d15f7f9413a6b8b1d99336a2a9c135 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 12:03:14 2024 -0400 Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail commit edd0f4ef45b20aceeccc708729023fb5d9afbc8e Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:36:23 2024 -0400 Corrected /srv restore/Unstage permissions commit 7d91bd16a8cb249e3519b474ea0561624f7d82b4 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:18:53 2024 -0400 Script was renamed to rn2_uninstall.sh and moved to .rn2_utils commit 8c0c56d2ba6ead61105450204862fa665116bf9b Merge: a007035 bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:49:02 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit a00703542ffb999d18f5fe423971e96782408066 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:48:21 2024 -0400 Added tee -a for appending to log file commit bb0d497e96c28a9e260439e3bc46e11766a644d9 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:27:38 2024 -0400 Resolve merge conflict commit a83fda3a95650a5906deeb03b8e8a1851a257ce9 Merge: acb9fc5 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:16:48 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit acb9fc53b8462b90561532eed28bb110efe4a6f2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:14:45 2024 -0400 Script was rename to rn2_uninstall.sh and moved to .rm2_utils commit 3fd34b17f5d79f00e2ec9bb24ade1cc958bf3ee2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:08:22 2024 -0400 Update README.md - In-Situ Upgrade commit 4f97fae0760b4fd1f0d02078bda68a8d495cc161 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:55:59 2024 -0400 Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool commit b252da5d5319a318af317b0eb5b124733f5da073 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:10:58 2024 -0400 Fix - DB Backup directory not cleaned up #1021 commit ad5555d760191e5e4e37cf7508b5d6f57de5e2cb Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 11:43:43 2024 -0400 RTL-SDR changes since it is not a APT installed package commit d967486f8a9f5e1e98f7bacffdf995af52974121 Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 09:22:53 2024 -0400 Clean up the library cache so any dangling items are cleared * Introduction of RN2 In-Situ Upgrade (#1024) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log to support.sh (#1028) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log * aarch64/arm64 support and general fixes (#1029) * Add toggle for coronal mass GIFs * aarch64 support Fixed typo in README Modified dependencies.yml to support 64-bit Predict and Satdump New script strach_perms.sh to correct /run/user/${UID} after reboot New script set_os_config_kernel8.sh to modify kernel so wxtoimg will run New DEB file for 64-bit predict New DEB file for 64-bit satdump * SatDump update for x64 machines * Modified tools & dependancies Modified dependancies in support of : wxtoimg libraries on ARM64 wxtoimg symbolic link for ARM64 predict on ARM64 Modified tasks in support of : wxtoimg kernel8 Fixing /run/user/uid permissions on reboot * Disabled - name: copy RTL-SDR udev rule We have an intermittant conflict from dualing UDEV rule files. They are identifical, but sometimes cause Satdump not to be able to open RTL-SDR receiver when executed as a non-root user. /usr/lib/udev/rules.d/60-librtlsdr0.rules is installed from OSMON's it clone RTL-SDR software" , which puts /lib/udev/rules.d/60-librtlsdr0.rules in place * rework * Added --fill_missing option to NOAA & METEOR receive scripts * undo "fill_missing" option from NOAA as its for GOES and METEOR only * Hmmm somehow `--fill_missing` got lost when I switched to SatDump live decoding * Adding updated SatDump for armhf built by Richard * Providing support for any Debian based distro * Setting automatic deletion to false to store 3 days worth of audio for archiving and debugging * Fixing the log for the breakpoint * Fixing the log for the break point * Preventing invalid receiver_type and satellite decoders from going past the install script * Adding fix to prevent Gtk-WARNING Modified schedule.sh to unset XTERM variables which would cause NOAA annotations to fail when passes were scheduled via VNC using lxterminal. * Widening the scope of variables to omit when scheduling passes * Added WAYFIRE to omit * Update receive_meteor.sh Backing out --fill_missing to avoid merge conflict with parent * Update receive_noaa.sh - Backing out changes to avoid merge conflict * add bottom - next/previous page in CAPTURE https://github.com/jekhokie/raspberry-noaa-v2/issues/1002 * Ooops... Thanks Jerome! * Updating comments * Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images. Example of warnings... UserWarning: marker is redundantly defined by the 'marker' keyword argument and the fmt string "o" (-> marker='o'). The keyword argument will take precedence. p.plot(az_at_max_elev, max_elev, 'o', marker="*", markersize=12, label="Max El") * Filter out wxtoimg error messages for known/acceptable issue Since the source code to WXTOIMG is not available I used gdc (w/o symbols) and strace and see what is causing the 'free invalid pointer' error. I determined that it happens on application clean up after successfully processing the map overlay file into the final image. Everything is working correctly except the clean up of a 3rd memory location which is failing because it was already removed by the kernel I believe. strace snippet: munmap(0xef6b8000, 20533248) = 0 munmap(0xee323000, 20533248) = 0 munmap(0xecf8e000, 20533248) = 0 writev(2, [{iov_base="free(): invalid pointer", iov_len=23}, {iov_base="\n", iov_len=1}], 2) = 24 The first two munmap calls worked and the third munmap fails as its already deallocated. The munmap() system call deletes the mappings for the specified address range, and causes further references to addresses within the range to generate invalid memory references. The region is also automatically unmapped when the process is terminated. On the other hand, closing the file descriptor does not unmap the region. At this point I'm happy to know it successfully allocated those memory slots for processing mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xef6b8000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xee323000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xecf8e000 but it was freeing up memory on the last address that it threw the error. This modification to receive_noaa.sh is to filter out the 'free invalid pointer' and 'Aborted' messages before its written out to the RN2 log * Filter out wxtoimg error messages for known/acceptable issue * Modified dependencies to support 32-bit wxtoimg on arm64 & amd64 * Modified core.yml to support various flavors of Linux * Removed wxtoimg 320bit support for AMD64 since we have a DEB for it already * Update README.md * Tuning Meteor M2-4 maps in MeteorDemod * Define XDG_RUNTIME_DIR with proper permissions Define XDG_RUNTIME_DIR with proper permissions * Introduction of Verification Tool and RN2 uninstall script (#1019) * Introduction of verification tool The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning f capture/decode/processing of APT telemetry data. Execute the verification script by passing the required argument [ quick | full ] $HOME/raspberry-noaa-v2/scripts/tools/verification.sh Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes) ######### # NOTES # ######### # Dryrun of binaries includes executing : nxing web page returned 200 OK status to confirm Web Portal is up. satdump live capture for 1 second to ensure it runs without error. wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg meteordemod -h is executed to ensure it runs without error. # When FULL mode is choosen meterdemod fully decodes a staged cadu file : meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp * Set 755 on verification.sh Set 755 on verification.sh * Ensure meteordemond working directory exists * Set 755 on build_permissions_list.sh * Update README.md Introduction of new Verification Tool * Update README.md Reformatting Troubleshooting section from lastchange * Update README.md * Script to remove RN2 installation * updated to shutdown nginx before removal * stop php service * Corrected php service name to stop when removing RN2 * further cleanup of services * Tweaked some of the logging messages * updated to remove rtl-sdr package * install script does not install RTL-SDR when it finds source in /tmp * Update caution_uninstall_rn2.sh * Clean up the library cache so any dangling items are cleared & RTL-SDR changes since it is not a APT installed package (#1020) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Delete db backup files that are older than 3 days * Removing old PHP thumbnail selection for Meteor (which didn't work) * Squashed commit of the following: commit 806663a83a01c91a74f214a15d9b2d7b2500f1e7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:41:41 2024 -0400 Corrected variable name commit cd010e0053f8dbe32421e65bd12dae501f879978 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:15:51 2024 -0400 Since verifcation tool is added to install script, conditionally execute from upgrade script commit 8c6ea4e755f5ff469b1463eacb10f6a5f9cb70b7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 06:38:18 2024 -0400 Removed /etc/modprobe.d/rtlsdr.conf commit a5b7821479bf74f9b7c0d0a67998424fde30e642 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 21:24:29 2024 -0400 Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. commit 3c50ae76316a823174ced50e0d68c1bbf2189949 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:17:12 2024 -0400 Added error handling and Improved text in echo for moving RN2 tree commit b375303f75d62f22d852cfd18162fc9bebe1fcdd Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:07:59 2024 -0400 Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name commit 5552f61a62d15f7f9413a6b8b1d99336a2a9c135 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 12:03:14 2024 -0400 Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail commit edd0f4ef45b20aceeccc708729023fb5d9afbc8e Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:36:23 2024 -0400 Corrected /srv restore/Unstage permissions commit 7d91bd16a8cb249e3519b474ea0561624f7d82b4 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:18:53 2024 -0400 Script was renamed to rn2_uninstall.sh and moved to .rn2_utils commit 8c0c56d2ba6ead61105450204862fa665116bf9b Merge: a007035 bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:49:02 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit a00703542ffb999d18f5fe423971e96782408066 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:48:21 2024 -0400 Added tee -a for appending to log file commit bb0d497e96c28a9e260439e3bc46e11766a644d9 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:27:38 2024 -0400 Resolve merge conflict commit a83fda3a95650a5906deeb03b8e8a1851a257ce9 Merge: acb9fc5 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:16:48 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit acb9fc53b8462b90561532eed28bb110efe4a6f2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:14:45 2024 -0400 Script was rename to rn2_uninstall.sh and moved to .rm2_utils commit 3fd34b17f5d79f00e2ec9bb24ade1cc958bf3ee2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:08:22 2024 -0400 Update README.md - In-Situ Upgrade commit 4f97fae0760b4fd1f0d02078bda68a8d495cc161 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:55:59 2024 -0400 Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool commit b252da5d5319a318af317b0eb5b124733f5da073 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:10:58 2024 -0400 Fix - DB Backup directory not cleaned up #1021 commit ad5555d760191e5e4e37cf7508b5d6f57de5e2cb Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 11:43:43 2024 -0400 RTL-SDR changes since it is not a APT installed package commit d967486f8a9f5e1e98f7bacffdf995af52974121 Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 09:22:53 2024 -0400 Clean up the library cache so any dangling items are cleared * Introduction of RN2 In-Situ Upgrade (#1024) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log to support.sh (#1028) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log --------- Co-authored-by: Sasszem <[email protected]> Co-authored-by: Richard Creasey - AI4Y <[email protected]> Co-authored-by: Jérôme <[email protected]> * Sunsetting legacy Debian 32 bit and Debian 64 bit support * aarch64 support (#1031) * Add toggle for coronal mass GIFs * aarch64 support Fixed typo in README Modified dependencies.yml to support 64-bit Predict and Satdump New script strach_perms.sh to correct /run/user/${UID} after reboot New script set_os_config_kernel8.sh to modify kernel so wxtoimg will run New DEB file for 64-bit predict New DEB file for 64-bit satdump * SatDump update for x64 machines * Modified tools & dependancies Modified dependancies in support of : wxtoimg libraries on ARM64 wxtoimg symbolic link for ARM64 predict on ARM64 Modified tasks in support of : wxtoimg kernel8 Fixing /run/user/uid permissions on reboot * Disabled - name: copy RTL-SDR udev rule We have an intermittant conflict from dualing UDEV rule files. They are identifical, but sometimes cause Satdump not to be able to open RTL-SDR receiver when executed as a non-root user. /usr/lib/udev/rules.d/60-librtlsdr0.rules is installed from OSMON's it clone RTL-SDR software" , which puts /lib/udev/rules.d/60-librtlsdr0.rules in place * rework * Added --fill_missing option to NOAA & METEOR receive scripts * undo "fill_missing" option from NOAA as its for GOES and METEOR only * Hmmm somehow `--fill_missing` got lost when I switched to SatDump live decoding * Adding updated SatDump for armhf built by Richard * Providing support for any Debian based distro * Setting automatic deletion to false to store 3 days worth of audio for archiving and debugging * Fixing the log for the breakpoint * Fixing the log for the break point * Preventing invalid receiver_type and satellite decoders from going past the install script * Adding fix to prevent Gtk-WARNING Modified schedule.sh to unset XTERM variables which would cause NOAA annotations to fail when passes were scheduled via VNC using lxterminal. * Widening the scope of variables to omit when scheduling passes * Added WAYFIRE to omit * Update receive_meteor.sh Backing out --fill_missing to avoid merge conflict with parent * Update receive_noaa.sh - Backing out changes to avoid merge conflict * add bottom - next/previous page in CAPTURE https://github.com/jekhokie/raspberry-noaa-v2/issues/1002 * Ooops... Thanks Jerome! * Updating comments * Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images. Example of warnings... UserWarning: marker is redundantly defined by the 'marker' keyword argument and the fmt string "o" (-> marker='o'). The keyword argument will take precedence. p.plot(az_at_max_elev, max_elev, 'o', marker="*", markersize=12, label="Max El") * Filter out wxtoimg error messages for known/acceptable issue Since the source code to WXTOIMG is not available I used gdc (w/o symbols) and strace and see what is causing the 'free invalid pointer' error. I determined that it happens on application clean up after successfully processing the map overlay file into the final image. Everything is working correctly except the clean up of a 3rd memory location which is failing because it was already removed by the kernel I believe. strace snippet: munmap(0xef6b8000, 20533248) = 0 munmap(0xee323000, 20533248) = 0 munmap(0xecf8e000, 20533248) = 0 writev(2, [{iov_base="free(): invalid pointer", iov_len=23}, {iov_base="\n", iov_len=1}], 2) = 24 The first two munmap calls worked and the third munmap fails as its already deallocated. The munmap() system call deletes the mappings for the specified address range, and causes further references to addresses within the range to generate invalid memory references. The region is also automatically unmapped when the process is terminated. On the other hand, closing the file descriptor does not unmap the region. At this point I'm happy to know it successfully allocated those memory slots for processing mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xef6b8000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xee323000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xecf8e000 but it was freeing up memory on the last address that it threw the error. This modification to receive_noaa.sh is to filter out the 'free invalid pointer' and 'Aborted' messages before its written out to the RN2 log * Filter out wxtoimg error messages for known/acceptable issue * Modified dependencies to support 32-bit wxtoimg on arm64 & amd64 * Modified core.yml to support various flavors of Linux * Removed wxtoimg 320bit support for AMD64 since we have a DEB for it already * Update README.md * Tuning Meteor M2-4 maps in MeteorDemod * Define XDG_RUNTIME_DIR with proper permissions Define XDG_RUNTIME_DIR with proper permissions * Introduction of Verification Tool and RN2 uninstall script (#1019) * Introduction of verification tool The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning f capture/decode/processing of APT telemetry data. Execute the verification script by passing the required argument [ quick | full ] $HOME/raspberry-noaa-v2/scripts/tools/verification.sh Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes) ######### # NOTES # ######### # Dryrun of binaries includes executing : nxing web page returned 200 OK status to confirm Web Portal is up. satdump live capture for 1 second to ensure it runs without error. wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg meteordemod -h is executed to ensure it runs without error. # When FULL mode is choosen meterdemod fully decodes a staged cadu file : meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp * Set 755 on verification.sh Set 755 on verification.sh * Ensure meteordemond working directory exists * Set 755 on build_permissions_list.sh * Update README.md Introduction of new Verification Tool * Update README.md Reformatting Troubleshooting section from lastchange * Update README.md * Script to remove RN2 installation * updated to shutdown nginx before removal * stop php service * Corrected php service name to stop when removing RN2 * further cleanup of services * Tweaked some of the logging messages * updated to remove rtl-sdr package * install script does not install RTL-SDR when it finds source in /tmp * Update caution_uninstall_rn2.sh * Clean up the library cache so any dangling items are cleared & RTL-SDR changes since it is not a APT installed package (#1020) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Delete db backup files that are older than 3 days * Removing old PHP thumbnail selection for Meteor (which didn't work) * Squashed commit of the following: commit 806663a83a01c91a74f214a15d9b2d7b2500f1e7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:41:41 2024 -0400 Corrected variable name commit cd010e0053f8dbe32421e65bd12dae501f879978 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:15:51 2024 -0400 Since verifcation tool is added to install script, conditionally execute from upgrade script commit 8c6ea4e755f5ff469b1463eacb10f6a5f9cb70b7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 06:38:18 2024 -0400 Removed /etc/modprobe.d/rtlsdr.conf commit a5b7821479bf74f9b7c0d0a67998424fde30e642 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 21:24:29 2024 -0400 Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. commit 3c50ae76316a823174ced50e0d68c1bbf2189949 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:17:12 2024 -0400 Added error handling and Improved text in echo for moving RN2 tree commit b375303f75d62f22d852cfd18162fc9bebe1fcdd Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:07:59 2024 -0400 Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name commit 5552f61a62d15f7f9413a6b8b1d99336a2a9c135 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 12:03:14 2024 -0400 Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail commit edd0f4ef45b20aceeccc708729023fb5d9afbc8e Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:36:23 2024 -0400 Corrected /srv restore/Unstage permissions commit 7d91bd16a8cb249e3519b474ea0561624f7d82b4 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:18:53 2024 -0400 Script was renamed to rn2_uninstall.sh and moved to .rn2_utils commit 8c0c56d2ba6ead61105450204862fa665116bf9b Merge: a007035 bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:49:02 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit a00703542ffb999d18f5fe423971e96782408066 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:48:21 2024 -0400 Added tee -a for appending to log file commit bb0d497e96c28a9e260439e3bc46e11766a644d9 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:27:38 2024 -0400 Resolve merge conflict commit a83fda3a95650a5906deeb03b8e8a1851a257ce9 Merge: acb9fc5 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:16:48 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit acb9fc53b8462b90561532eed28bb110efe4a6f2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:14:45 2024 -0400 Script was rename to rn2_uninstall.sh and moved to .rm2_utils commit 3fd34b17f5d79f00e2ec9bb24ade1cc958bf3ee2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:08:22 2024 -0400 Update README.md - In-Situ Upgrade commit 4f97fae0760b4fd1f0d02078bda68a8d495cc161 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:55:59 2024 -0400 Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool commit b252da5d5319a318af317b0eb5b124733f5da073 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:10:58 2024 -0400 Fix - DB Backup directory not cleaned up #1021 commit ad5555d760191e5e4e37cf7508b5d6f57de5e2cb Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 11:43:43 2024 -0400 RTL-SDR changes since it is not a APT installed package commit d967486f8a9f5e1e98f7bacffdf995af52974121 Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 09:22:53 2024 -0400 Clean up the library cache so any dangling items are cleared * Introduction of RN2 In-Situ Upgrade (#1024) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log to support.sh (#1028) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log --------- Co-authored-by: Sasszem <[email protected]> Co-authored-by: Richard Creasey - AI4Y <[email protected]> Co-authored-by: Jérôme <[email protected]> * Rebooting the Pi automatically after the first install * Fixing filling issue for SatDump Meteor images * Fixing filling issue for Meteor when decoding with SatDump * Update README.md (#1037) * Update core.yml - Simply getting OS Release (#1038) Update core.yml - Simply getting OS Release Goal was to work on as many as Debian Distro's as possible even if they are using local repo's * Update README.md (#1043) * Update rn2_uninstall.sh (#1045) Commenting out systemctl disable service because disable causes it to remain disabled even after the service is removed and reinstalled by Ansible Commenting out the disable command has no impact since it will be removed when removing packages * Update verification.sh (#1046) Ooops... I had hard coded /home/richard , fixed with ${HOME} * Beta development - Setting SDR Device ID, Fixed Receive scripts to pass PPM Offset, Fixed dependancies to work on OS Lite versions (#1049) * Setting SDR Device ID * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md - fixed mispelling * Update setting_sdr_source_id.md - Fixed 2nd typo * Update setting_sdr_source_id.md - Fixed more typo's (SMH) * Update setting_sdr_source_id.md - Reformatting * Update setting_sdr_source_id.md * beta-development - Pass missing --ppm_correction parameter to satdump Tested PPM Offset was passed and processed by satdump correctly when receive scripts were called from AT jobs with settings.yml values of : noaa_15_freq_offset: -2 noaa_18_freq_offset: -1 noaa_19_freq_offset: 0 meteor_m2_3_freq_offset: 1 meteor_m2_4_freq_offset: 2 * beta-development - bug fix - OS Lite versions Bookworm 64 & Bullseye 32 OS Lite versions Bookworm 64 & Bullseye 32 fail on fresh OS install I have tested this fix on Bookworm 64-bit full & lite as well as Bullseye 32-bit Full/lite OS Lite versions do not have .config, but when its created as as part of the .config/meteordemod task below The .config ownership of top directory is root:root 755 when this happens and it needs to be target_user:target_user 700 * Clean up Bogus config/annotation directory created under $HOME RN2 installs have been placing a second config/annotation directory under ${HOME} which is not used. As part of this clean up the verification tool permissions list has this directory and is sub directory removed from being checked. * Removed unneeded task * Fix to be tested * Fix to be tested for RTL-SDR PPM correction (#1051) * Fixing filling issue for SatDump Meteor images * Fix to be tested * Beta development - modified receive scripts to pass PPM & Offset based on receiver type (#1052) * Setting SDR Device ID * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md - fixed mispelling * Update setting_sdr_source_id.md - Fixed 2nd typo * Update setting_sdr_source_id.md - Fixed more typo's (SMH) * Update setting_sdr_source_id.md - Reformatting * Update setting_sdr_source_id.md * beta-development - Pass missing --ppm_correction parameter to satdump Tested PPM Offset was passed and processed by satdump correctly when receive scripts were called from AT jobs with settings.yml values of : noaa_15_freq_offset: -2 noaa_18_freq_offset: -1 noaa_19_freq_offset: 0 meteor_m2_3_freq_offset: 1 meteor_m2_4_freq_offset: 2 * beta-development - bug fix - OS Lite versions Bookworm 64 & Bullseye 32 OS Lite versions Bookworm 64 & Bullseye 32 fail on fresh OS install I have tested this fix on Bookworm 64-bit full & lite as well as Bullseye 32-bit Full/lite OS Lite versions do not have .config, but when its created as as part of the .config/meteordemod task below The .config ownership of top directory is root:root 755 when this happens and it needs to be target_user:target_user 700 * Clean up Bogus config/annotation directory created under $HOME RN2 installs have been placing a second config/annotation directory under ${HOME} which is not used. As part of this clean up the verification tool permissions list has this directory and is sub directory removed from being checked. * Removed unneeded task * Reverting PPM changes to receive scripts ppm_correction should only be used for RTPSDR and RTL-TCP, there may be other receivers that can use it but unknown * Update noaa-v2.conf.j2 This was left out of ansible/roles/common/templates/noaa-v2.conf.j2 template file which caused an error for anyone enabling it. # Coronal mass ejection activity ENABLE_CORONAL={{ enable_coronal|lower }} * modified receive scripts to pass PPM & Offset based on receiver type Modified receivenoaa.sh & receive_meteor.sh scripts to pass PPM & Offset based on receiver type. Also added a log statement so everybody can see whats getting sent to satdump from output.log /home/richard/raspberry-noaa-v2/scripts/receive_noaa.sh "NOAA 18" NOAA-18-20240813-153343 /home/richard/raspberry-noaa-v2/tmp/orbit.tle 1723563223 3 32 Southbound E # I added setting FREQ_OFFSET="" when its not an rtlsdr receiver to prevent the Offset being passed to satdump if [[ "$receiver" == "rtlsdr" ]]; then gain_option="--gain" ppm_correction="--ppm_correction" else gain_option="--general_gain" FREQ_OFFSET="" fi I tested it for NOAA 18 and you can see PPM and Offset was passed to satdump as desired: richard@raspberrypi:~$ /home/richard/raspberry-noaa-v2/scripts/receive_noaa.sh "NOAA 18" NOAA-18-20240813-153343 /home/richard/raspberry-noaa-v2/tmp/orbit.tle 1723563223 3 32 Southbound E INFO : The system has enough space to store a NOAA pass on RAM INFO : Free : 7454 ; Required : 50 INFO : Direction Southbound INFO : Cropping SatDump NOAA images enabled INFO : Recording /home/richard/raspberry-noaa-v2 via rtlsdr at MHz via SatDump live pipeline INFO : /usr/bin/satdump live noaa_apt . --source rtlsdr --samplerate 1.024e6 --ppm_correction 0 --frequency 137.9125e6 --satellite_number 18 --sdrpp_noise_reduction --gain 49.6 --autocrop_wedges --start_timestamp 1723563313 --save_wav --timeout 3 INFO : Files recorded INFO : Resampling down audio INFO : Producing pristine image INFO : Bulding pass map Satdump log shows ppm was passed 14:08:43 - 13/08/2024] (D) Parameters : [14:08:43 - 13/08/2024] (D) - align_timestamps : true [14:08:43 - 13/08/2024] (D) - audio_samplerate : 50000.0 [14:08:43 - 13/08/2024] (D) - autocrop_wedges : true [14:08:43 - 13/08/2024] (D) - baseband_format : "cf32" [14:08:43 - 13/08/2024] (D) - buffer_size : 1000000 [14:08:43 - 13/08/2024] (D) - frequency : 137912500 [14:08:43 - 13/08/2024] (D) - gain : 49.6 [14:08:43 - 13/08/2024] (D) - max_crop_stddev : 3500 [14:08:43 - 13/08/2024] (D) - ppm_correction : 0 [14:08:43 - 13/08/2024] (D) - samplerate : 1024000 # Since I don't have another SDR receiver type, I flipped the logic to test that neither --ppm_correction or Offset values were passed to setdump using: if [[ "$receiver" == "rtlsdr" ]]; then gain_option="--general_gain" FREQ_OFFSET="" else gain_option="--gain" ppm_correction="--ppm_correction" fi richard@raspberrypi:~$ /home/richard/raspberry-noaa-v2/scripts/receive_noaa.sh "NOAA 18" NOAA-18-20240813-153343 /home/richard/raspberry-noaa-v2/tmp/orbit.tle 1723563223 3 32 Southbound E INFO : The system has enough space to store a NOAA pass on RAM INFO : Free : 7452 ; Required : 50 INFO : Direction Southbound INFO : Cropping SatDump NOAA images enabled INFO : Recording /home/richard/raspberry-noaa-v2 via rtlsdr at MHz via SatDump live pipeline INFO : /usr/bin/satdump live noaa_apt . --source rtlsdr --samplerate 1.024e6 --frequency 137.9125e6 --satellite_number 18 --sdrpp_noise_reduction --general_gain 49.6 --autocrop_wedges --start_timestamp 1723563313 --save_wav --timeout 3 ^CINFO : Files recorded INFO : Resampling down audio INFO : Producing pristine image INFO : Bulding pass map Satdump log shows ppm & offset was not passed [14:11:17 - 13/08/2024] (D) Parameters : [14:11:17 - 13/08/2024] (D) - align_timestamps : true [14:11:17 - 13/08/2024] (D) - audio_samplerate : 50000.0 [14:11:17 - 13/08/2024] (D) - autocrop_wedges : true [14:11:17 - 13/08/2024] (D) - baseband_format : "cf32" [14:11:17 - 13/08/2024] (D) - buffer_size : 1000000 [14:11:17 - 13/08/2024] (D) - frequency : 137912500 [14:11:17 - 13/08/2024] (D) - general_gain : 49.6 [14:11:17 - 13/08/2024] (D) - max_crop_stddev : 3500 [14:11:17 - 13/08/2024] (D) - samplerate : 1024000 I modified receive_metoer.sh and performed the same testing /home/richard/raspberry-noaa-v2/scripts/receive_meteor.sh "METEOR-M2 4" METEOR-M2-4-20240813-194754 /home/richard/raspberry-noaa-v2/tmp/orbit.tle 1723578474 3 83 Northbound W I tested it for M2-4 and you can see PPM and Offset was passed to satdump as desired: INFO : The system has enough space to store a Meteor pass on RAM INFO : Free : 7462 ; Required : 10 INFO : Direction Northbound INFO : I'll flip this image pass because FLIP_METEOR_IMG is set to true and PASS_DIRECTION is Northbound INFO : Recording /home/richard/raspberry-noaa-v2 via rtlsdr at 137.9000 MHz using SatDump record INFO : /usr/bin/satdump live meteor_m2-x_lrpt . --source rtlsdr --samplerate 1.024e6 --ppm_correction 0 --frequency 137.9000e6 --gain 49.6 --fill_missing --timeout 3 INFO : Removing old bmp, gcp, and dat files INFO : Running MeteorDemod to demodulate OQPSK file, rectify (spread) images, create heat map and composites and convert them to JPG INFO : Waiting for files to close Satdump log shows ppm was passed [14:32:22 - 13/08/2024] (D) Parameters : [14:32:22 - 13/08/2024] (D) - baseband_format : "cf32" [14:32:22 - 13/08/2024] (D) - buffer_size : 1000000 [14:32:22 - 13/08/2024] (D) - cadu_size : 8192 [14:32:22 - 13/08/2024] (D) - constellation : "oqpsk" [14:32:22 - 13/08/2024] (D) - derandomize : true [14:32:22 - 13/08/2024] (D) - fill_missing : true [14:32:22 - 13/08/2024] (D) - frequency : 137900000 [14:32:22 - 13/08/2024] (D) - gain : 49.6 [14:32:22 - 13/08/2024] (D) - nrzm : true [14:32:22 - 13/08/2024] (D) - ppm_correction : 0 [14:32:22 - 13/08/2024] (D) - rs_dualbasis : false [14:32:22 - 13/08/2024] (D) - rs_i : 4 [14:32:22 - 13/08/2024] (D) - rs_type : "rs223" [14:32:22 - 13/08/2024] (D) - rs_usecheck : true [14:32:22 - 13/08/2024] (D) - samplerate : 1024000 # Since I don't have another SDR receiver type, I flipped the logic to test that neither --ppm_correction or Offset values were passed to setdump using: NFO : The system has enough space to store a Meteor pass on RAM INFO : Free : 7463 ; Required : 10 INFO : Direction Northbound INFO : I'll flip this image pass because FLIP_METEOR_IMG is set to true and PASS_DIRECTION is Northbound INFO : Recording /home/richard/raspberry-noaa-v2 via rtlsdr at 137.9000 MHz using SatDump record INFO : /usr/bin/satdump live meteor_m2-x_lrpt . --source rtlsdr --samplerate 1.024e6 --frequency 137.9000e6 --general_gain 49.6 --fill_missing --timeout 3 INFO : Removing old bmp, gcp, and dat files INFO : Running MeteorDemod to demodulate OQPSK file, rectify (spread) images, create heat map and composites and convert them to JPG INFO : Waiting for files to close Satdump log shows ppm & offset was not passed [14:35:06 - 13/08/2024] (D) Parameters : [14:35:06 - 13/08/2024] (D) - baseband_format : "cf32" [14:35:06 - 13/08/2024] (D) - buffer_size : 1000000 [14:35:06 - 13/08/2024] (D) - cadu_size : 8192 [14:35:06 - 13/08/2024] (D) - constellation : "oqpsk" [14:35:06 - 13/08/2024] (D) - derandomize : true [14:35:06 - 13/08/2024] (D) - fill_missing : true [14:35:06 - 13/08/2024] (D) - frequency : 137900000 [14:35:06 - 13/08/2024] (D) - general_gain : 49.6 [14:35:06 - 13/08/2024] (D) - nrzm : true [14:35:06 - 13/08/2024] (D) - rs_dualbasis : false [14:35:06 - 13/08/2024] (D) - rs_i : 4 [14:35:06 - 13/08/2024] (D) - rs_type : "rs223" [14:35:06 - 13/08/2024] (D) - rs_usecheck : true [14:35:06 - 13/08/2024] (D) - samplerate : 1024000 * Ensure ownership/permissions are set correctly for key scripts * Ensure ownership/permissions are set correctly for key scripts --------- Co-authored-by: MihajloPi - YU4MPI <[email protected]> * Changing config directory ownership as root * Removing whitespaces * Ooops... * Allow odd timezones in sun.py (#1056) * fixes #1021 * fixes #1055 * Fix deprecation warning in heatmap.py (#1059) * fixes #1021 * fixes deprecation message for getsize and ANTIALIAS (will be removed in Pillow 10) * Beta development - Update dependencies/yml - added become: yes for .config ownership (#1057) * Setting SDR Device ID * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md - fixed mispelling * Update setting_sdr_source_id.md - Fixed 2nd typo * Update setting_sdr_source_id.md - Fixed more typo's (SMH) * Update setting_sdr_source_id.md - Reformatting * Update setting_sdr_source_id.md * beta-development - Pass missing --ppm_correction parameter to satdump Tested PPM Offset was passed and processed by satdump correctly when receive scripts were called from AT jobs with settings.yml values of : noaa_15_freq_offset: -2 noaa_18_freq_offset: -1 noaa_19_freq_offset: 0 meteor_m2_3_freq_offset: 1 meteor_m2_4_freq_offset: 2 * beta-development - bug fix - OS Lite versions Bookworm 64 & Bullseye 32 OS Lite versions Bookworm 64 & Bullseye 32 fail on fresh OS install I have tested this fix on Bookworm 64-bit full & lite as well as Bullseye 32-bit Full/lite OS Lite versions do not have .config, but when its created as as part of the .config/meteordemod task below The .config ownership of top directory is root:root 755 when this happens and it needs to be target_user:target_user 700 * Clean up Bogus config/annotation directory created under $HOME RN2 installs have been placing a second config/a…

* Bumping version * 64-bit Bookworm support for Raspberry Pi, SatDump update, bugfixes and many more. (#1070) * Add toggle for coronal mass GIFs * aarch64 support Fixed typo in README Modified dependencies.yml to support 64-bit Predict and Satdump New script strach_perms.sh to correct /run/user/${UID} after reboot New script set_os_config_kernel8.sh to modify kernel so wxtoimg will run New DEB file for 64-bit predict New DEB file for 64-bit satdump * SatDump update for x64 machines * Modified tools & dependancies Modified dependancies in support of : wxtoimg libraries on ARM64 wxtoimg symbolic link for ARM64 predict on ARM64 Modified tasks in support of : wxtoimg kernel8 Fixing /run/user/uid permissions on reboot * Disabled - name: copy RTL-SDR udev rule We have an intermittant conflict from dualing UDEV rule files. They are identifical, but sometimes cause Satdump not to be able to open RTL-SDR receiver when executed as a non-root user. /usr/lib/udev/rules.d/60-librtlsdr0.rules is installed from OSMON's it clone RTL-SDR software" , which puts /lib/udev/rules.d/60-librtlsdr0.rules in place * rework * Added --fill_missing option to NOAA & METEOR receive scripts * undo "fill_missing" option from NOAA as its for GOES and METEOR only * Hmmm somehow `--fill_missing` got lost when I switched to SatDump live decoding * Adding updated SatDump for armhf built by Richard * Providing support for any Debian based distro * Setting automatic deletion to false to store 3 days worth of audio for archiving and debugging * Fixing the log for the breakpoint * Fixing the log for the break point * Preventing invalid receiver_type and satellite decoders from going past the install script * Adding fix to prevent Gtk-WARNING Modified schedule.sh to unset XTERM variables which would cause NOAA annotations to fail when passes were scheduled via VNC using lxterminal. * Widening the scope of variables to omit when scheduling passes * Added WAYFIRE to omit * Update receive_meteor.sh Backing out --fill_missing to avoid merge conflict with parent * Update receive_noaa.sh - Backing out changes to avoid merge conflict * add bottom - next/previous page in CAPTURE https://github.com/jekhokie/raspberry-noaa-v2/issues/1002 * Ooops... Thanks Jerome! * Updating comments * Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images. Example of warnings... UserWarning: marker is redundantly defined by the 'marker' keyword argument and the fmt string "o" (-> marker='o'). The keyword argument will take precedence. p.plot(az_at_max_elev, max_elev, 'o', marker="*", markersize=12, label="Max El") * Filter out wxtoimg error messages for known/acceptable issue Since the source code to WXTOIMG is not available I used gdc (w/o symbols) and strace and see what is causing the 'free invalid pointer' error. I determined that it happens on application clean up after successfully processing the map overlay file into the final image. Everything is working correctly except the clean up of a 3rd memory location which is failing because it was already removed by the kernel I believe. strace snippet: munmap(0xef6b8000, 20533248) = 0 munmap(0xee323000, 20533248) = 0 munmap(0xecf8e000, 20533248) = 0 writev(2, [{iov_base="free(): invalid pointer", iov_len=23}, {iov_base="\n", iov_len=1}], 2) = 24 The first two munmap calls worked and the third munmap fails as its already deallocated. The munmap() system call deletes the mappings for the specified address range, and causes further references to addresses within the range to generate invalid memory references. The region is also automatically unmapped when the process is terminated. On the other hand, closing the file descriptor does not unmap the region. At this point I'm happy to know it successfully allocated those memory slots for processing mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xef6b8000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xee323000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xecf8e000 but it was freeing up memory on the last address that it threw the error. This modification to receive_noaa.sh is to filter out the 'free invalid pointer' and 'Aborted' messages before its written out to the RN2 log * Filter out wxtoimg error messages for known/acceptable issue * Modified dependencies to support 32-bit wxtoimg on arm64 & amd64 * Modified core.yml to support various flavors of Linux * Removed wxtoimg 320bit support for AMD64 since we have a DEB for it already * Update README.md * Tuning Meteor M2-4 maps in MeteorDemod * Define XDG_RUNTIME_DIR with proper permissions Define XDG_RUNTIME_DIR with proper permissions * Introduction of Verification Tool and RN2 uninstall script (#1019) * Introduction of verification tool The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning f capture/decode/processing of APT telemetry data. Execute the verification script by passing the required argument [ quick | full ] $HOME/raspberry-noaa-v2/scripts/tools/verification.sh Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes) ######### # NOTES # ######### # Dryrun of binaries includes executing : nxing web page returned 200 OK status to confirm Web Portal is up. satdump live capture for 1 second to ensure it runs without error. wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg meteordemod -h is executed to ensure it runs without error. # When FULL mode is choosen meterdemod fully decodes a staged cadu file : meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp * Set 755 on verification.sh Set 755 on verification.sh * Ensure meteordemond working directory exists * Set 755 on build_permissions_list.sh * Update README.md Introduction of new Verification Tool * Update README.md Reformatting Troubleshooting section from lastchange * Update README.md * Script to remove RN2 installation * updated to shutdown nginx before removal * stop php service * Corrected php service name to stop when removing RN2 * further cleanup of services * Tweaked some of the logging messages * updated to remove rtl-sdr package * install script does not install RTL-SDR when it finds source in /tmp * Update caution_uninstall_rn2.sh * Clean up the library cache so any dangling items are cleared & RTL-SDR changes since it is not a APT installed package (#1020) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Delete db backup files that are older than 3 days * Removing old PHP thumbnail selection for Meteor (which didn't work) * Squashed commit of the following: commit 806663a83a01c91a74f214a15d9b2d7b2500f1e7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:41:41 2024 -0400 Corrected variable name commit cd010e0053f8dbe32421e65bd12dae501f879978 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:15:51 2024 -0400 Since verifcation tool is added to install script, conditionally execute from upgrade script commit 8c6ea4e755f5ff469b1463eacb10f6a5f9cb70b7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 06:38:18 2024 -0400 Removed /etc/modprobe.d/rtlsdr.conf commit a5b7821479bf74f9b7c0d0a67998424fde30e642 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 21:24:29 2024 -0400 Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. commit 3c50ae76316a823174ced50e0d68c1bbf2189949 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:17:12 2024 -0400 Added error handling and Improved text in echo for moving RN2 tree commit b375303f75d62f22d852cfd18162fc9bebe1fcdd Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:07:59 2024 -0400 Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name commit 5552f61a62d15f7f9413a6b8b1d99336a2a9c135 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 12:03:14 2024 -0400 Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail commit edd0f4ef45b20aceeccc708729023fb5d9afbc8e Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:36:23 2024 -0400 Corrected /srv restore/Unstage permissions commit 7d91bd16a8cb249e3519b474ea0561624f7d82b4 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:18:53 2024 -0400 Script was renamed to rn2_uninstall.sh and moved to .rn2_utils commit 8c0c56d2ba6ead61105450204862fa665116bf9b Merge: a007035 bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:49:02 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit a00703542ffb999d18f5fe423971e96782408066 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:48:21 2024 -0400 Added tee -a for appending to log file commit bb0d497e96c28a9e260439e3bc46e11766a644d9 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:27:38 2024 -0400 Resolve merge conflict commit a83fda3a95650a5906deeb03b8e8a1851a257ce9 Merge: acb9fc5 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:16:48 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit acb9fc53b8462b90561532eed28bb110efe4a6f2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:14:45 2024 -0400 Script was rename to rn2_uninstall.sh and moved to .rm2_utils commit 3fd34b17f5d79f00e2ec9bb24ade1cc958bf3ee2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:08:22 2024 -0400 Update README.md - In-Situ Upgrade commit 4f97fae0760b4fd1f0d02078bda68a8d495cc161 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:55:59 2024 -0400 Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool commit b252da5d5319a318af317b0eb5b124733f5da073 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:10:58 2024 -0400 Fix - DB Backup directory not cleaned up #1021 commit ad5555d760191e5e4e37cf7508b5d6f57de5e2cb Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 11:43:43 2024 -0400 RTL-SDR changes since it is not a APT installed package commit d967486f8a9f5e1e98f7bacffdf995af52974121 Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 09:22:53 2024 -0400 Clean up the library cache so any dangling items are cleared * Introduction of RN2 In-Situ Upgrade (#1024) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log to support.sh (#1028) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log * aarch64/arm64 support and general fixes (#1029) * Add toggle for coronal mass GIFs * aarch64 support Fixed typo in README Modified dependencies.yml to support 64-bit Predict and Satdump New script strach_perms.sh to correct /run/user/${UID} after reboot New script set_os_config_kernel8.sh to modify kernel so wxtoimg will run New DEB file for 64-bit predict New DEB file for 64-bit satdump * SatDump update for x64 machines * Modified tools & dependancies Modified dependancies in support of : wxtoimg libraries on ARM64 wxtoimg symbolic link for ARM64 predict on ARM64 Modified tasks in support of : wxtoimg kernel8 Fixing /run/user/uid permissions on reboot * Disabled - name: copy RTL-SDR udev rule We have an intermittant conflict from dualing UDEV rule files. They are identifical, but sometimes cause Satdump not to be able to open RTL-SDR receiver when executed as a non-root user. /usr/lib/udev/rules.d/60-librtlsdr0.rules is installed from OSMON's it clone RTL-SDR software" , which puts /lib/udev/rules.d/60-librtlsdr0.rules in place * rework * Added --fill_missing option to NOAA & METEOR receive scripts * undo "fill_missing" option from NOAA as its for GOES and METEOR only * Hmmm somehow `--fill_missing` got lost when I switched to SatDump live decoding * Adding updated SatDump for armhf built by Richard * Providing support for any Debian based distro * Setting automatic deletion to false to store 3 days worth of audio for archiving and debugging * Fixing the log for the breakpoint * Fixing the log for the break point * Preventing invalid receiver_type and satellite decoders from going past the install script * Adding fix to prevent Gtk-WARNING Modified schedule.sh to unset XTERM variables which would cause NOAA annotations to fail when passes were scheduled via VNC using lxterminal. * Widening the scope of variables to omit when scheduling passes * Added WAYFIRE to omit * Update receive_meteor.sh Backing out --fill_missing to avoid merge conflict with parent * Update receive_noaa.sh - Backing out changes to avoid merge conflict * add bottom - next/previous page in CAPTURE https://github.com/jekhokie/raspberry-noaa-v2/issues/1002 * Ooops... Thanks Jerome! * Updating comments * Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images. Example of warnings... UserWarning: marker is redundantly defined by the 'marker' keyword argument and the fmt string "o" (-> marker='o'). The keyword argument will take precedence. p.plot(az_at_max_elev, max_elev, 'o', marker="*", markersize=12, label="Max El") * Filter out wxtoimg error messages for known/acceptable issue Since the source code to WXTOIMG is not available I used gdc (w/o symbols) and strace and see what is causing the 'free invalid pointer' error. I determined that it happens on application clean up after successfully processing the map overlay file into the final image. Everything is working correctly except the clean up of a 3rd memory location which is failing because it was already removed by the kernel I believe. strace snippet: munmap(0xef6b8000, 20533248) = 0 munmap(0xee323000, 20533248) = 0 munmap(0xecf8e000, 20533248) = 0 writev(2, [{iov_base="free(): invalid pointer", iov_len=23}, {iov_base="\n", iov_len=1}], 2) = 24 The first two munmap calls worked and the third munmap fails as its already deallocated. The munmap() system call deletes the mappings for the specified address range, and causes further references to addresses within the range to generate invalid memory references. The region is also automatically unmapped when the process is terminated. On the other hand, closing the file descriptor does not unmap the region. At this point I'm happy to know it successfully allocated those memory slots for processing mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xef6b8000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xee323000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xecf8e000 but it was freeing up memory on the last address that it threw the error. This modification to receive_noaa.sh is to filter out the 'free invalid pointer' and 'Aborted' messages before its written out to the RN2 log * Filter out wxtoimg error messages for known/acceptable issue * Modified dependencies to support 32-bit wxtoimg on arm64 & amd64 * Modified core.yml to support various flavors of Linux * Removed wxtoimg 320bit support for AMD64 since we have a DEB for it already * Update README.md * Tuning Meteor M2-4 maps in MeteorDemod * Define XDG_RUNTIME_DIR with proper permissions Define XDG_RUNTIME_DIR with proper permissions * Introduction of Verification Tool and RN2 uninstall script (#1019) * Introduction of verification tool The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning f capture/decode/processing of APT telemetry data. Execute the verification script by passing the required argument [ quick | full ] $HOME/raspberry-noaa-v2/scripts/tools/verification.sh Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes) ######### # NOTES # ######### # Dryrun of binaries includes executing : nxing web page returned 200 OK status to confirm Web Portal is up. satdump live capture for 1 second to ensure it runs without error. wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg meteordemod -h is executed to ensure it runs without error. # When FULL mode is choosen meterdemod fully decodes a staged cadu file : meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp * Set 755 on verification.sh Set 755 on verification.sh * Ensure meteordemond working directory exists * Set 755 on build_permissions_list.sh * Update README.md Introduction of new Verification Tool * Update README.md Reformatting Troubleshooting section from lastchange * Update README.md * Script to remove RN2 installation * updated to shutdown nginx before removal * stop php service * Corrected php service name to stop when removing RN2 * further cleanup of services * Tweaked some of the logging messages * updated to remove rtl-sdr package * install script does not install RTL-SDR when it finds source in /tmp * Update caution_uninstall_rn2.sh * Clean up the library cache so any dangling items are cleared & RTL-SDR changes since it is not a APT installed package (#1020) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Delete db backup files that are older than 3 days * Removing old PHP thumbnail selection for Meteor (which didn't work) * Squashed commit of the following: commit 806663a83a01c91a74f214a15d9b2d7b2500f1e7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:41:41 2024 -0400 Corrected variable name commit cd010e0053f8dbe32421e65bd12dae501f879978 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:15:51 2024 -0400 Since verifcation tool is added to install script, conditionally execute from upgrade script commit 8c6ea4e755f5ff469b1463eacb10f6a5f9cb70b7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 06:38:18 2024 -0400 Removed /etc/modprobe.d/rtlsdr.conf commit a5b7821479bf74f9b7c0d0a67998424fde30e642 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 21:24:29 2024 -0400 Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. commit 3c50ae76316a823174ced50e0d68c1bbf2189949 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:17:12 2024 -0400 Added error handling and Improved text in echo for moving RN2 tree commit b375303f75d62f22d852cfd18162fc9bebe1fcdd Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:07:59 2024 -0400 Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name commit 5552f61a62d15f7f9413a6b8b1d99336a2a9c135 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 12:03:14 2024 -0400 Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail commit edd0f4ef45b20aceeccc708729023fb5d9afbc8e Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:36:23 2024 -0400 Corrected /srv restore/Unstage permissions commit 7d91bd16a8cb249e3519b474ea0561624f7d82b4 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:18:53 2024 -0400 Script was renamed to rn2_uninstall.sh and moved to .rn2_utils commit 8c0c56d2ba6ead61105450204862fa665116bf9b Merge: a007035 bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:49:02 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit a00703542ffb999d18f5fe423971e96782408066 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:48:21 2024 -0400 Added tee -a for appending to log file commit bb0d497e96c28a9e260439e3bc46e11766a644d9 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:27:38 2024 -0400 Resolve merge conflict commit a83fda3a95650a5906deeb03b8e8a1851a257ce9 Merge: acb9fc5 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:16:48 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit acb9fc53b8462b90561532eed28bb110efe4a6f2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:14:45 2024 -0400 Script was rename to rn2_uninstall.sh and moved to .rm2_utils commit 3fd34b17f5d79f00e2ec9bb24ade1cc958bf3ee2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:08:22 2024 -0400 Update README.md - In-Situ Upgrade commit 4f97fae0760b4fd1f0d02078bda68a8d495cc161 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:55:59 2024 -0400 Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool commit b252da5d5319a318af317b0eb5b124733f5da073 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:10:58 2024 -0400 Fix - DB Backup directory not cleaned up #1021 commit ad5555d760191e5e4e37cf7508b5d6f57de5e2cb Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 11:43:43 2024 -0400 RTL-SDR changes since it is not a APT installed package commit d967486f8a9f5e1e98f7bacffdf995af52974121 Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 09:22:53 2024 -0400 Clean up the library cache so any dangling items are cleared * Introduction of RN2 In-Situ Upgrade (#1024) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log to support.sh (#1028) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log --------- Co-authored-by: Sasszem <[email protected]> Co-authored-by: Richard Creasey - AI4Y <[email protected]> Co-authored-by: Jérôme <[email protected]> * Sunsetting legacy Debian 32 bit and Debian 64 bit support * aarch64 support (#1031) * Add toggle for coronal mass GIFs * aarch64 support Fixed typo in README Modified dependencies.yml to support 64-bit Predict and Satdump New script strach_perms.sh to correct /run/user/${UID} after reboot New script set_os_config_kernel8.sh to modify kernel so wxtoimg will run New DEB file for 64-bit predict New DEB file for 64-bit satdump * SatDump update for x64 machines * Modified tools & dependancies Modified dependancies in support of : wxtoimg libraries on ARM64 wxtoimg symbolic link for ARM64 predict on ARM64 Modified tasks in support of : wxtoimg kernel8 Fixing /run/user/uid permissions on reboot * Disabled - name: copy RTL-SDR udev rule We have an intermittant conflict from dualing UDEV rule files. They are identifical, but sometimes cause Satdump not to be able to open RTL-SDR receiver when executed as a non-root user. /usr/lib/udev/rules.d/60-librtlsdr0.rules is installed from OSMON's it clone RTL-SDR software" , which puts /lib/udev/rules.d/60-librtlsdr0.rules in place * rework * Added --fill_missing option to NOAA & METEOR receive scripts * undo "fill_missing" option from NOAA as its for GOES and METEOR only * Hmmm somehow `--fill_missing` got lost when I switched to SatDump live decoding * Adding updated SatDump for armhf built by Richard * Providing support for any Debian based distro * Setting automatic deletion to false to store 3 days worth of audio for archiving and debugging * Fixing the log for the breakpoint * Fixing the log for the break point * Preventing invalid receiver_type and satellite decoders from going past the install script * Adding fix to prevent Gtk-WARNING Modified schedule.sh to unset XTERM variables which would cause NOAA annotations to fail when passes were scheduled via VNC using lxterminal. * Widening the scope of variables to omit when scheduling passes * Added WAYFIRE to omit * Update receive_meteor.sh Backing out --fill_missing to avoid merge conflict with parent * Update receive_noaa.sh - Backing out changes to avoid merge conflict * add bottom - next/previous page in CAPTURE https://github.com/jekhokie/raspberry-noaa-v2/issues/1002 * Ooops... Thanks Jerome! * Updating comments * Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images. Example of warnings... UserWarning: marker is redundantly defined by the 'marker' keyword argument and the fmt string "o" (-> marker='o'). The keyword argument will take precedence. p.plot(az_at_max_elev, max_elev, 'o', marker="*", markersize=12, label="Max El") * Filter out wxtoimg error messages for known/acceptable issue Since the source code to WXTOIMG is not available I used gdc (w/o symbols) and strace and see what is causing the 'free invalid pointer' error. I determined that it happens on application clean up after successfully processing the map overlay file into the final image. Everything is working correctly except the clean up of a 3rd memory location which is failing because it was already removed by the kernel I believe. strace snippet: munmap(0xef6b8000, 20533248) = 0 munmap(0xee323000, 20533248) = 0 munmap(0xecf8e000, 20533248) = 0 writev(2, [{iov_base="free(): invalid pointer", iov_len=23}, {iov_base="\n", iov_len=1}], 2) = 24 The first two munmap calls worked and the third munmap fails as its already deallocated. The munmap() system call deletes the mappings for the specified address range, and causes further references to addresses within the range to generate invalid memory references. The region is also automatically unmapped when the process is terminated. On the other hand, closing the file descriptor does not unmap the region. At this point I'm happy to know it successfully allocated those memory slots for processing mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xef6b8000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xee323000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xecf8e000 but it was freeing up memory on the last address that it threw the error. This modification to receive_noaa.sh is to filter out the 'free invalid pointer' and 'Aborted' messages before its written out to the RN2 log * Filter out wxtoimg error messages for known/acceptable issue * Modified dependencies to support 32-bit wxtoimg on arm64 & amd64 * Modified core.yml to support various flavors of Linux * Removed wxtoimg 320bit support for AMD64 since we have a DEB for it already * Update README.md * Tuning Meteor M2-4 maps in MeteorDemod * Define XDG_RUNTIME_DIR with proper permissions Define XDG_RUNTIME_DIR with proper permissions * Introduction of Verification Tool and RN2 uninstall script (#1019) * Introduction of verification tool The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning f capture/decode/processing of APT telemetry data. Execute the verification script by passing the required argument [ quick | full ] $HOME/raspberry-noaa-v2/scripts/tools/verification.sh Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes) ######### # NOTES # ######### # Dryrun of binaries includes executing : nxing web page returned 200 OK status to confirm Web Portal is up. satdump live capture for 1 second to ensure it runs without error. wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg meteordemod -h is executed to ensure it runs without error. # When FULL mode is choosen meterdemod fully decodes a staged cadu file : meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp * Set 755 on verification.sh Set 755 on verification.sh * Ensure meteordemond working directory exists * Set 755 on build_permissions_list.sh * Update README.md Introduction of new Verification Tool * Update README.md Reformatting Troubleshooting section from lastchange * Update README.md * Script to remove RN2 installation * updated to shutdown nginx before removal * stop php service * Corrected php service name to stop when removing RN2 * further cleanup of services * Tweaked some of the logging messages * updated to remove rtl-sdr package * install script does not install RTL-SDR when it finds source in /tmp * Update caution_uninstall_rn2.sh * Clean up the library cache so any dangling items are cleared & RTL-SDR changes since it is not a APT installed package (#1020) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Delete db backup files that are older than 3 days * Removing old PHP thumbnail selection for Meteor (which didn't work) * Squashed commit of the following: commit 806663a83a01c91a74f214a15d9b2d7b2500f1e7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:41:41 2024 -0400 Corrected variable name commit cd010e0053f8dbe32421e65bd12dae501f879978 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:15:51 2024 -0400 Since verifcation tool is added to install script, conditionally execute from upgrade script commit 8c6ea4e755f5ff469b1463eacb10f6a5f9cb70b7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 06:38:18 2024 -0400 Removed /etc/modprobe.d/rtlsdr.conf commit a5b7821479bf74f9b7c0d0a67998424fde30e642 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 21:24:29 2024 -0400 Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. commit 3c50ae76316a823174ced50e0d68c1bbf2189949 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:17:12 2024 -0400 Added error handling and Improved text in echo for moving RN2 tree commit b375303f75d62f22d852cfd18162fc9bebe1fcdd Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:07:59 2024 -0400 Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name commit 5552f61a62d15f7f9413a6b8b1d99336a2a9c135 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 12:03:14 2024 -0400 Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail commit edd0f4ef45b20aceeccc708729023fb5d9afbc8e Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:36:23 2024 -0400 Corrected /srv restore/Unstage permissions commit 7d91bd16a8cb249e3519b474ea0561624f7d82b4 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:18:53 2024 -0400 Script was renamed to rn2_uninstall.sh and moved to .rn2_utils commit 8c0c56d2ba6ead61105450204862fa665116bf9b Merge: a007035 bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:49:02 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit a00703542ffb999d18f5fe423971e96782408066 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:48:21 2024 -0400 Added tee -a for appending to log file commit bb0d497e96c28a9e260439e3bc46e11766a644d9 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:27:38 2024 -0400 Resolve merge conflict commit a83fda3a95650a5906deeb03b8e8a1851a257ce9 Merge: acb9fc5 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:16:48 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit acb9fc53b8462b90561532eed28bb110efe4a6f2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:14:45 2024 -0400 Script was rename to rn2_uninstall.sh and moved to .rm2_utils commit 3fd34b17f5d79f00e2ec9bb24ade1cc958bf3ee2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:08:22 2024 -0400 Update README.md - In-Situ Upgrade commit 4f97fae0760b4fd1f0d02078bda68a8d495cc161 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:55:59 2024 -0400 Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool commit b252da5d5319a318af317b0eb5b124733f5da073 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:10:58 2024 -0400 Fix - DB Backup directory not cleaned up #1021 commit ad5555d760191e5e4e37cf7508b5d6f57de5e2cb Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 11:43:43 2024 -0400 RTL-SDR changes since it is not a APT installed package commit d967486f8a9f5e1e98f7bacffdf995af52974121 Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 09:22:53 2024 -0400 Clean up the library cache so any dangling items are cleared * Introduction of RN2 In-Situ Upgrade (#1024) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log to support.sh (#1028) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log --------- Co-authored-by: Sasszem <[email protected]> Co-authored-by: Richard Creasey - AI4Y <[email protected]> Co-authored-by: Jérôme <[email protected]> * Rebooting the Pi automatically after the first install * Fixing filling issue for SatDump Meteor images * Fixing filling issue for Meteor when decoding with SatDump * Update README.md (#1037) * Update core.yml - Simply getting OS Release (#1038) Update core.yml - Simply getting OS Release Goal was to work on as many as Debian Distro's as possible even if they are using local repo's * Update README.md (#1043) * Update rn2_uninstall.sh (#1045) Commenting out systemctl disable service because disable causes it to remain disabled even after the service is removed and reinstalled by Ansible Commenting out the disable command has no impact since it will be removed when removing packages * Update verification.sh (#1046) Ooops... I had hard coded /home/richard , fixed with ${HOME} * Beta development - Setting SDR Device ID, Fixed Receive scripts to pass PPM Offset, Fixed dependancies to work on OS Lite versions (#1049) * Setting SDR Device ID * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md - fixed mispelling * Update setting_sdr_source_id.md - Fixed 2nd typo * Update setting_sdr_source_id.md - Fixed more typo's (SMH) * Update setting_sdr_source_id.md - Reformatting * Update setting_sdr_source_id.md * beta-development - Pass missing --ppm_correction parameter to satdump Tested PPM Offset was passed and processed by satdump correctly when receive scripts were called from AT jobs with settings.yml values of : noaa_15_freq_offset: -2 noaa_18_freq_offset: -1 noaa_19_freq_offset: 0 meteor_m2_3_freq_offset: 1 meteor_m2_4_freq_offset: 2 * beta-development - bug fix - OS Lite versions Bookworm 64 & Bullseye 32 OS Lite versions Bookworm 64 & Bullseye 32 fail on fresh OS install I have tested this fix on Bookworm 64-bit full & lite as well as Bullseye 32-bit Full/lite OS Lite versions do not have .config, but when its created as as part of the .config/meteordemod task below The .config ownership of top directory is root:root 755 when this happens and it needs to be target_user:target_user 700 * Clean up Bogus config/annotation directory created under $HOME RN2 installs have been placing a second config/annotation directory under ${HOME} which is not used. As part of this clean up the verification tool permissions list has this directory and is sub directory removed from being checked. * Removed unneeded task * Fix to be tested * Fix to be tested for RTL-SDR PPM correction (#1051) * Fixing filling issue for SatDump Meteor images * Fix to be tested * Beta development - modified receive scripts to pass PPM & Offset based on receiver type (#1052) * Setting SDR Device ID * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md - fixed mispelling * Update setting_sdr_source_id.md - Fixed 2nd typo * Update setting_sdr_source_id.md - Fixed more typo's (SMH) * Update setting_sdr_source_id.md - Reformatting * Update setting_sdr_source_id.md * beta-development - Pass missing --ppm_correction parameter to satdump Tested PPM Offset was passed and processed by satdump correctly when receive scripts were called from AT jobs with settings.yml values of : noaa_15_freq_offset: -2 noaa_18_freq_offset: -1 noaa_19_freq_offset: 0 meteor_m2_3_freq_offset: 1 meteor_m2_4_freq_offset: 2 * beta-development - bug fix - OS Lite versions Bookworm 64 & Bullseye 32 OS Lite versions Bookworm 64 & Bullseye 32 fail on fresh OS install I have tested this fix on Bookworm 64-bit full & lite as well as Bullseye 32-bit Full/lite OS Lite versions do not have .config, but when its created as as part of the .config/meteordemod task below The .config ownership of top directory is root:root 755 when this happens and it needs to be target_user:target_user 700 * Clean up Bogus config/annotation directory created under $HOME RN2 installs have been placing a second config/annotation directory under ${HOME} which is not used. As part of this clean up the verification tool permissions list has this directory and is sub directory removed from being checked. * Removed unneeded task * Reverting PPM changes to receive scripts ppm_correction should only be used for RTPSDR and RTL-TCP, there may be other receivers that can use it but unknown * Update noaa-v2.conf.j2 This was left out of ansible/roles/common/templates/noaa-v2.conf.j2 template file which caused an error for anyone enabling it. # Coronal mass ejection activity ENABLE_CORONAL={{ enable_coronal|lower }} * modified receive scripts to pass PPM & Offset based on receiver type Modified receivenoaa.sh & receive_meteor.sh scripts to pass PPM & Offset based on receiver type. Also added a log statement so everybody can see whats getting sent to satdump from output.log /home/richard/raspberry-noaa-v2/scripts/receive_noaa.sh "NOAA 18" NOAA-18-20240813-153343 /home/richard/raspberry-noaa-v2/tmp/orbit.tle 1723563223 3 32 Southbound E # I added setting FREQ_OFFSET="" when its not an rtlsdr receiver to prevent the Offset being passed to satdump if [[ "$receiver" == "rtlsdr" ]]; then gain_option="--gain" ppm_correction="--ppm_correction" else gain_option="--general_gain" FREQ_OFFSET="" fi I tested it for NOAA 18 and you can see PPM and Offset was passed to satdump as desired: richard@raspberrypi:~$ /home/richard/raspberry-noaa-v2/scripts/receive_noaa.sh "NOAA 18" NOAA-18-20240813-153343 /home/richard/raspberry-noaa-v2/tmp/orbit.tle 1723563223 3 32 Southbound E INFO : The system has enough space to store a NOAA pass on RAM INFO : Free : 7454 ; Required : 50 INFO : Direction Southbound INFO : Cropping SatDump NOAA images enabled INFO : Recording /home/richard/raspberry-noaa-v2 via rtlsdr at MHz via SatDump live pipeline INFO : /usr/bin/satdump live noaa_apt . --source rtlsdr --samplerate 1.024e6 --ppm_correction 0 --frequency 137.9125e6 --satellite_number 18 --sdrpp_noise_reduction --gain 49.6 --autocrop_wedges --start_timestamp 1723563313 --save_wav --timeout 3 INFO : Files recorded INFO : Resampling down audio INFO : Producing pristine image INFO : Bulding pass map Satdump log shows ppm was passed 14:08:43 - 13/08/2024] (D) Parameters : [14:08:43 - 13/08/2024] (D) - align_timestamps : true [14:08:43 - 13/08/2024] (D) - audio_samplerate : 50000.0 [14:08:43 - 13/08/2024] (D) - autocrop_wedges : true [14:08:43 - 13/08/2024] (D) - baseband_format : "cf32" [14:08:43 - 13/08/2024] (D) - buffer_size : 1000000 [14:08:43 - 13/08/2024] (D) - frequency : 137912500 [14:08:43 - 13/08/2024] (D) - gain : 49.6 [14:08:43 - 13/08/2024] (D) - max_crop_stddev : 3500 [14:08:43 - 13/08/2024] (D) - ppm_correction : 0 [14:08:43 - 13/08/2024] (D) - samplerate : 1024000 # Since I don't have another SDR receiver type, I flipped the logic to test that neither --ppm_correction or Offset values were passed to setdump using: if [[ "$receiver" == "rtlsdr" ]]; then gain_option="--general_gain" FREQ_OFFSET="" else gain_option="--gain" ppm_correction="--ppm_correction" fi richard@raspberrypi:~$ /home/richard/raspberry-noaa-v2/scripts/receive_noaa.sh "NOAA 18" NOAA-18-20240813-153343 /home/richard/raspberry-noaa-v2/tmp/orbit.tle 1723563223 3 32 Southbound E INFO : The system has enough space to store a NOAA pass on RAM INFO : Free : 7452 ; Required : 50 INFO : Direction Southbound INFO : Cropping SatDump NOAA images enabled INFO : Recording /home/richard/raspberry-noaa-v2 via rtlsdr at MHz via SatDump live pipeline INFO : /usr/bin/satdump live noaa_apt . --source rtlsdr --samplerate 1.024e6 --frequency 137.9125e6 --satellite_number 18 --sdrpp_noise_reduction --general_gain 49.6 --autocrop_wedges --start_timestamp 1723563313 --save_wav --timeout 3 ^CINFO : Files recorded INFO : Resampling down audio INFO : Producing pristine image INFO : Bulding pass map Satdump log shows ppm & offset was not passed [14:11:17 - 13/08/2024] (D) Parameters : [14:11:17 - 13/08/2024] (D) - align_timestamps : true [14:11:17 - 13/08/2024] (D) - audio_samplerate : 50000.0 [14:11:17 - 13/08/2024] (D) - autocrop_wedges : true [14:11:17 - 13/08/2024] (D) - baseband_format : "cf32" [14:11:17 - 13/08/2024] (D) - buffer_size : 1000000 [14:11:17 - 13/08/2024] (D) - frequency : 137912500 [14:11:17 - 13/08/2024] (D) - general_gain : 49.6 [14:11:17 - 13/08/2024] (D) - max_crop_stddev : 3500 [14:11:17 - 13/08/2024] (D) - samplerate : 1024000 I modified receive_metoer.sh and performed the same testing /home/richard/raspberry-noaa-v2/scripts/receive_meteor.sh "METEOR-M2 4" METEOR-M2-4-20240813-194754 /home/richard/raspberry-noaa-v2/tmp/orbit.tle 1723578474 3 83 Northbound W I tested it for M2-4 and you can see PPM and Offset was passed to satdump as desired: INFO : The system has enough space to store a Meteor pass on RAM INFO : Free : 7462 ; Required : 10 INFO : Direction Northbound INFO : I'll flip this image pass because FLIP_METEOR_IMG is set to true and PASS_DIRECTION is Northbound INFO : Recording /home/richard/raspberry-noaa-v2 via rtlsdr at 137.9000 MHz using SatDump record INFO : /usr/bin/satdump live meteor_m2-x_lrpt . --source rtlsdr --samplerate 1.024e6 --ppm_correction 0 --frequency 137.9000e6 --gain 49.6 --fill_missing --timeout 3 INFO : Removing old bmp, gcp, and dat files INFO : Running MeteorDemod to demodulate OQPSK file, rectify (spread) images, create heat map and composites and convert them to JPG INFO : Waiting for files to close Satdump log shows ppm was passed [14:32:22 - 13/08/2024] (D) Parameters : [14:32:22 - 13/08/2024] (D) - baseband_format : "cf32" [14:32:22 - 13/08/2024] (D) - buffer_size : 1000000 [14:32:22 - 13/08/2024] (D) - cadu_size : 8192 [14:32:22 - 13/08/2024] (D) - constellation : "oqpsk" [14:32:22 - 13/08/2024] (D) - derandomize : true [14:32:22 - 13/08/2024] (D) - fill_missing : true [14:32:22 - 13/08/2024] (D) - frequency : 137900000 [14:32:22 - 13/08/2024] (D) - gain : 49.6 [14:32:22 - 13/08/2024] (D) - nrzm : true [14:32:22 - 13/08/2024] (D) - ppm_correction : 0 [14:32:22 - 13/08/2024] (D) - rs_dualbasis : false [14:32:22 - 13/08/2024] (D) - rs_i : 4 [14:32:22 - 13/08/2024] (D) - rs_type : "rs223" [14:32:22 - 13/08/2024] (D) - rs_usecheck : true [14:32:22 - 13/08/2024] (D) - samplerate : 1024000 # Since I don't have another SDR receiver type, I flipped the logic to test that neither --ppm_correction or Offset values were passed to setdump using: NFO : The system has enough space to store a Meteor pass on RAM INFO : Free : 7463 ; Required : 10 INFO : Direction Northbound INFO : I'll flip this image pass because FLIP_METEOR_IMG is set to true and PASS_DIRECTION is Northbound INFO : Recording /home/richard/raspberry-noaa-v2 via rtlsdr at 137.9000 MHz using SatDump record INFO : /usr/bin/satdump live meteor_m2-x_lrpt . --source rtlsdr --samplerate 1.024e6 --frequency 137.9000e6 --general_gain 49.6 --fill_missing --timeout 3 INFO : Removing old bmp, gcp, and dat files INFO : Running MeteorDemod to demodulate OQPSK file, rectify (spread) images, create heat map and composites and convert them to JPG INFO : Waiting for files to close Satdump log shows ppm & offset was not passed [14:35:06 - 13/08/2024] (D) Parameters : [14:35:06 - 13/08/2024] (D) - baseband_format : "cf32" [14:35:06 - 13/08/2024] (D) - buffer_size : 1000000 [14:35:06 - 13/08/2024] (D) - cadu_size : 8192 [14:35:06 - 13/08/2024] (D) - constellation : "oqpsk" [14:35:06 - 13/08/2024] (D) - derandomize : true [14:35:06 - 13/08/2024] (D) - fill_missing : true [14:35:06 - 13/08/2024] (D) - frequency : 137900000 [14:35:06 - 13/08/2024] (D) - general_gain : 49.6 [14:35:06 - 13/08/2024] (D) - nrzm : true [14:35:06 - 13/08/2024] (D) - rs_dualbasis : false [14:35:06 - 13/08/2024] (D) - rs_i : 4 [14:35:06 - 13/08/2024] (D) - rs_type : "rs223" [14:35:06 - 13/08/2024] (D) - rs_usecheck : true [14:35:06 - 13/08/2024] (D) - samplerate : 1024000 * Ensure ownership/permissions are set correctly for key scripts * Ensure ownership/permissions are set correctly for key scripts --------- Co-authored-by: MihajloPi - YU4MPI <[email protected]> * Changing config directory ownership as root * Removing whitespaces * Ooops... * Allow odd timezones in sun.py (#1056) * fixes #1021 * fixes #1055 * Fix deprecation warning in heatmap.py (#1059) * fixes #1021 * fixes deprecation message for getsize and ANTIALIAS (will be removed in Pillow 10) * Beta development - Update dependencies/yml - added become: yes for .config ownership (#1057) * Setting SDR Device ID * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md - fixed mispelling * Update setting_sdr_source_id.md - Fixed 2nd typo * Update setting_sdr_source_id.md - Fixed more typo's (SMH) * Update setting_sdr_source_id.md - Reformatting * Update setting_sdr_source_id.md * beta-development - Pass missing --ppm_correction parameter to satdump Tested PPM Offset was passed and processed by satdump correctly when receive scripts were called from AT jobs with settings.yml values of : noaa_15_freq_offset: -2 noaa_18_freq_offset: -1 noaa_19_freq_offset: 0 meteor_m2_3_freq_offset: 1 meteor_m2_4_freq_offset: 2 * beta-development - bug fix - OS Lite versions Bookworm 64 & Bullseye 32 OS Lite versions Bookworm 64 & Bullseye 32 fail on fresh OS install I have tested this fix on Bookworm 64-bit full & lite as well as Bullseye 32-bit Full/lite OS Lite versions do not have .config, but when its created as as part of the .config/meteordemod task below The .config ownership of top directory is root:root 755 when this happens and it needs to be target_user:target_user 700 * Clean up Bogus config/annotation directory created under $H…

… // Inspire-Sat 7 having been retired (#1073) (#1074) * Add toggle for coronal mass GIFs * aarch64 support Fixed typo in README Modified dependencies.yml to support 64-bit Predict and Satdump New script strach_perms.sh to correct /run/user/${UID} after reboot New script set_os_config_kernel8.sh to modify kernel so wxtoimg will run New DEB file for 64-bit predict New DEB file for 64-bit satdump * SatDump update for x64 machines * Modified tools & dependancies Modified dependancies in support of : wxtoimg libraries on ARM64 wxtoimg symbolic link for ARM64 predict on ARM64 Modified tasks in support of : wxtoimg kernel8 Fixing /run/user/uid permissions on reboot * Disabled - name: copy RTL-SDR udev rule We have an intermittant conflict from dualing UDEV rule files. They are identifical, but sometimes cause Satdump not to be able to open RTL-SDR receiver when executed as a non-root user. /usr/lib/udev/rules.d/60-librtlsdr0.rules is installed from OSMON's it clone RTL-SDR software" , which puts /lib/udev/rules.d/60-librtlsdr0.rules in place * rework * Added --fill_missing option to NOAA & METEOR receive scripts * undo "fill_missing" option from NOAA as its for GOES and METEOR only * Hmmm somehow `--fill_missing` got lost when I switched to SatDump live decoding * Adding updated SatDump for armhf built by Richard * Providing support for any Debian based distro * Setting automatic deletion to false to store 3 days worth of audio for archiving and debugging * Fixing the log for the breakpoint * Fixing the log for the break point * Preventing invalid receiver_type and satellite decoders from going past the install script * Adding fix to prevent Gtk-WARNING Modified schedule.sh to unset XTERM variables which would cause NOAA annotations to fail when passes were scheduled via VNC using lxterminal. * Widening the scope of variables to omit when scheduling passes * Added WAYFIRE to omit * Update receive_meteor.sh Backing out --fill_missing to avoid merge conflict with parent * Update receive_noaa.sh - Backing out changes to avoid merge conflict * add bottom - next/previous page in CAPTURE https://github.com/jekhokie/raspberry-noaa-v2/issues/1002 * Ooops... Thanks Jerome! * Updating comments * Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images. Example of warnings... UserWarning: marker is redundantly defined by the 'marker' keyword argument and the fmt string "o" (-> marker='o'). The keyword argument will take precedence. p.plot(az_at_max_elev, max_elev, 'o', marker="*", markersize=12, label="Max El") * Filter out wxtoimg error messages for known/acceptable issue Since the source code to WXTOIMG is not available I used gdc (w/o symbols) and strace and see what is causing the 'free invalid pointer' error. I determined that it happens on application clean up after successfully processing the map overlay file into the final image. Everything is working correctly except the clean up of a 3rd memory location which is failing because it was already removed by the kernel I believe. strace snippet: munmap(0xef6b8000, 20533248) = 0 munmap(0xee323000, 20533248) = 0 munmap(0xecf8e000, 20533248) = 0 writev(2, [{iov_base="free(): invalid pointer", iov_len=23}, {iov_base="\n", iov_len=1}], 2) = 24 The first two munmap calls worked and the third munmap fails as its already deallocated. The munmap() system call deletes the mappings for the specified address range, and causes further references to addresses within the range to generate invalid memory references. The region is also automatically unmapped when the process is terminated. On the other hand, closing the file descriptor does not unmap the region. At this point I'm happy to know it successfully allocated those memory slots for processing mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xef6b8000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xee323000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xecf8e000 but it was freeing up memory on the last address that it threw the error. This modification to receive_noaa.sh is to filter out the 'free invalid pointer' and 'Aborted' messages before its written out to the RN2 log * Filter out wxtoimg error messages for known/acceptable issue * Modified dependencies to support 32-bit wxtoimg on arm64 & amd64 * Modified core.yml to support various flavors of Linux * Removed wxtoimg 320bit support for AMD64 since we have a DEB for it already * Update README.md * Tuning Meteor M2-4 maps in MeteorDemod * Define XDG_RUNTIME_DIR with proper permissions Define XDG_RUNTIME_DIR with proper permissions * Introduction of Verification Tool and RN2 uninstall script (#1019) * Introduction of verification tool The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning f capture/decode/processing of APT telemetry data. Execute the verification script by passing the required argument [ quick | full ] $HOME/raspberry-noaa-v2/scripts/tools/verification.sh Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes) ######### # NOTES # ######### # Dryrun of binaries includes executing : nxing web page returned 200 OK status to confirm Web Portal is up. satdump live capture for 1 second to ensure it runs without error. wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg meteordemod -h is executed to ensure it runs without error. # When FULL mode is choosen meterdemod fully decodes a staged cadu file : meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp * Set 755 on verification.sh Set 755 on verification.sh * Ensure meteordemond working directory exists * Set 755 on build_permissions_list.sh * Update README.md Introduction of new Verification Tool * Update README.md Reformatting Troubleshooting section from lastchange * Update README.md * Script to remove RN2 installation * updated to shutdown nginx before removal * stop php service * Corrected php service name to stop when removing RN2 * further cleanup of services * Tweaked some of the logging messages * updated to remove rtl-sdr package * install script does not install RTL-SDR when it finds source in /tmp * Update caution_uninstall_rn2.sh * Clean up the library cache so any dangling items are cleared & RTL-SDR changes since it is not a APT installed package (#1020) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Delete db backup files that are older than 3 days * Removing old PHP thumbnail selection for Meteor (which didn't work) * Squashed commit of the following: commit 806663a83a01c91a74f214a15d9b2d7b2500f1e7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:41:41 2024 -0400 Corrected variable name commit cd010e0053f8dbe32421e65bd12dae501f879978 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:15:51 2024 -0400 Since verifcation tool is added to install script, conditionally execute from upgrade script commit 8c6ea4e755f5ff469b1463eacb10f6a5f9cb70b7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 06:38:18 2024 -0400 Removed /etc/modprobe.d/rtlsdr.conf commit a5b7821479bf74f9b7c0d0a67998424fde30e642 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 21:24:29 2024 -0400 Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. commit 3c50ae76316a823174ced50e0d68c1bbf2189949 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:17:12 2024 -0400 Added error handling and Improved text in echo for moving RN2 tree commit b375303f75d62f22d852cfd18162fc9bebe1fcdd Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:07:59 2024 -0400 Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name commit 5552f61a62d15f7f9413a6b8b1d99336a2a9c135 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 12:03:14 2024 -0400 Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail commit edd0f4ef45b20aceeccc708729023fb5d9afbc8e Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:36:23 2024 -0400 Corrected /srv restore/Unstage permissions commit 7d91bd16a8cb249e3519b474ea0561624f7d82b4 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:18:53 2024 -0400 Script was renamed to rn2_uninstall.sh and moved to .rn2_utils commit 8c0c56d2ba6ead61105450204862fa665116bf9b Merge: a007035 bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:49:02 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit a00703542ffb999d18f5fe423971e96782408066 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:48:21 2024 -0400 Added tee -a for appending to log file commit bb0d497e96c28a9e260439e3bc46e11766a644d9 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:27:38 2024 -0400 Resolve merge conflict commit a83fda3a95650a5906deeb03b8e8a1851a257ce9 Merge: acb9fc5 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:16:48 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit acb9fc53b8462b90561532eed28bb110efe4a6f2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:14:45 2024 -0400 Script was rename to rn2_uninstall.sh and moved to .rm2_utils commit 3fd34b17f5d79f00e2ec9bb24ade1cc958bf3ee2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:08:22 2024 -0400 Update README.md - In-Situ Upgrade commit 4f97fae0760b4fd1f0d02078bda68a8d495cc161 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:55:59 2024 -0400 Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool commit b252da5d5319a318af317b0eb5b124733f5da073 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:10:58 2024 -0400 Fix - DB Backup directory not cleaned up #1021 commit ad5555d760191e5e4e37cf7508b5d6f57de5e2cb Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 11:43:43 2024 -0400 RTL-SDR changes since it is not a APT installed package commit d967486f8a9f5e1e98f7bacffdf995af52974121 Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 09:22:53 2024 -0400 Clean up the library cache so any dangling items are cleared * Introduction of RN2 In-Situ Upgrade (#1024) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log to support.sh (#1028) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log * aarch64/arm64 support and general fixes (#1029) * Add toggle for coronal mass GIFs * aarch64 support Fixed typo in README Modified dependencies.yml to support 64-bit Predict and Satdump New script strach_perms.sh to correct /run/user/${UID} after reboot New script set_os_config_kernel8.sh to modify kernel so wxtoimg will run New DEB file for 64-bit predict New DEB file for 64-bit satdump * SatDump update for x64 machines * Modified tools & dependancies Modified dependancies in support of : wxtoimg libraries on ARM64 wxtoimg symbolic link for ARM64 predict on ARM64 Modified tasks in support of : wxtoimg kernel8 Fixing /run/user/uid permissions on reboot * Disabled - name: copy RTL-SDR udev rule We have an intermittant conflict from dualing UDEV rule files. They are identifical, but sometimes cause Satdump not to be able to open RTL-SDR receiver when executed as a non-root user. /usr/lib/udev/rules.d/60-librtlsdr0.rules is installed from OSMON's it clone RTL-SDR software" , which puts /lib/udev/rules.d/60-librtlsdr0.rules in place * rework * Added --fill_missing option to NOAA & METEOR receive scripts * undo "fill_missing" option from NOAA as its for GOES and METEOR only * Hmmm somehow `--fill_missing` got lost when I switched to SatDump live decoding * Adding updated SatDump for armhf built by Richard * Providing support for any Debian based distro * Setting automatic deletion to false to store 3 days worth of audio for archiving and debugging * Fixing the log for the breakpoint * Fixing the log for the break point * Preventing invalid receiver_type and satellite decoders from going past the install script * Adding fix to prevent Gtk-WARNING Modified schedule.sh to unset XTERM variables which would cause NOAA annotations to fail when passes were scheduled via VNC using lxterminal. * Widening the scope of variables to omit when scheduling passes * Added WAYFIRE to omit * Update receive_meteor.sh Backing out --fill_missing to avoid merge conflict with parent * Update receive_noaa.sh - Backing out changes to avoid merge conflict * add bottom - next/previous page in CAPTURE https://github.com/jekhokie/raspberry-noaa-v2/issues/1002 * Ooops... Thanks Jerome! * Updating comments * Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images. Example of warnings... UserWarning: marker is redundantly defined by the 'marker' keyword argument and the fmt string "o" (-> marker='o'). The keyword argument will take precedence. p.plot(az_at_max_elev, max_elev, 'o', marker="*", markersize=12, label="Max El") * Filter out wxtoimg error messages for known/acceptable issue Since the source code to WXTOIMG is not available I used gdc (w/o symbols) and strace and see what is causing the 'free invalid pointer' error. I determined that it happens on application clean up after successfully processing the map overlay file into the final image. Everything is working correctly except the clean up of a 3rd memory location which is failing because it was already removed by the kernel I believe. strace snippet: munmap(0xef6b8000, 20533248) = 0 munmap(0xee323000, 20533248) = 0 munmap(0xecf8e000, 20533248) = 0 writev(2, [{iov_base="free(): invalid pointer", iov_len=23}, {iov_base="\n", iov_len=1}], 2) = 24 The first two munmap calls worked and the third munmap fails as its already deallocated. The munmap() system call deletes the mappings for the specified address range, and causes further references to addresses within the range to generate invalid memory references. The region is also automatically unmapped when the process is terminated. On the other hand, closing the file descriptor does not unmap the region. At this point I'm happy to know it successfully allocated those memory slots for processing mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xef6b8000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xee323000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xecf8e000 but it was freeing up memory on the last address that it threw the error. This modification to receive_noaa.sh is to filter out the 'free invalid pointer' and 'Aborted' messages before its written out to the RN2 log * Filter out wxtoimg error messages for known/acceptable issue * Modified dependencies to support 32-bit wxtoimg on arm64 & amd64 * Modified core.yml to support various flavors of Linux * Removed wxtoimg 320bit support for AMD64 since we have a DEB for it already * Update README.md * Tuning Meteor M2-4 maps in MeteorDemod * Define XDG_RUNTIME_DIR with proper permissions Define XDG_RUNTIME_DIR with proper permissions * Introduction of Verification Tool and RN2 uninstall script (#1019) * Introduction of verification tool The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning f capture/decode/processing of APT telemetry data. Execute the verification script by passing the required argument [ quick | full ] $HOME/raspberry-noaa-v2/scripts/tools/verification.sh Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes) ######### # NOTES # ######### # Dryrun of binaries includes executing : nxing web page returned 200 OK status to confirm Web Portal is up. satdump live capture for 1 second to ensure it runs without error. wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg meteordemod -h is executed to ensure it runs without error. # When FULL mode is choosen meterdemod fully decodes a staged cadu file : meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp * Set 755 on verification.sh Set 755 on verification.sh * Ensure meteordemond working directory exists * Set 755 on build_permissions_list.sh * Update README.md Introduction of new Verification Tool * Update README.md Reformatting Troubleshooting section from lastchange * Update README.md * Script to remove RN2 installation * updated to shutdown nginx before removal * stop php service * Corrected php service name to stop when removing RN2 * further cleanup of services * Tweaked some of the logging messages * updated to remove rtl-sdr package * install script does not install RTL-SDR when it finds source in /tmp * Update caution_uninstall_rn2.sh * Clean up the library cache so any dangling items are cleared & RTL-SDR changes since it is not a APT installed package (#1020) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Delete db backup files that are older than 3 days * Removing old PHP thumbnail selection for Meteor (which didn't work) * Squashed commit of the following: commit 806663a83a01c91a74f214a15d9b2d7b2500f1e7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:41:41 2024 -0400 Corrected variable name commit cd010e0053f8dbe32421e65bd12dae501f879978 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:15:51 2024 -0400 Since verifcation tool is added to install script, conditionally execute from upgrade script commit 8c6ea4e755f5ff469b1463eacb10f6a5f9cb70b7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 06:38:18 2024 -0400 Removed /etc/modprobe.d/rtlsdr.conf commit a5b7821479bf74f9b7c0d0a67998424fde30e642 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 21:24:29 2024 -0400 Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. commit 3c50ae76316a823174ced50e0d68c1bbf2189949 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:17:12 2024 -0400 Added error handling and Improved text in echo for moving RN2 tree commit b375303f75d62f22d852cfd18162fc9bebe1fcdd Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:07:59 2024 -0400 Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name commit 5552f61a62d15f7f9413a6b8b1d99336a2a9c135 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 12:03:14 2024 -0400 Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail commit edd0f4ef45b20aceeccc708729023fb5d9afbc8e Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:36:23 2024 -0400 Corrected /srv restore/Unstage permissions commit 7d91bd16a8cb249e3519b474ea0561624f7d82b4 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:18:53 2024 -0400 Script was renamed to rn2_uninstall.sh and moved to .rn2_utils commit 8c0c56d2ba6ead61105450204862fa665116bf9b Merge: a007035 bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:49:02 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit a00703542ffb999d18f5fe423971e96782408066 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:48:21 2024 -0400 Added tee -a for appending to log file commit bb0d497e96c28a9e260439e3bc46e11766a644d9 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:27:38 2024 -0400 Resolve merge conflict commit a83fda3a95650a5906deeb03b8e8a1851a257ce9 Merge: acb9fc5 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:16:48 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit acb9fc53b8462b90561532eed28bb110efe4a6f2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:14:45 2024 -0400 Script was rename to rn2_uninstall.sh and moved to .rm2_utils commit 3fd34b17f5d79f00e2ec9bb24ade1cc958bf3ee2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:08:22 2024 -0400 Update README.md - In-Situ Upgrade commit 4f97fae0760b4fd1f0d02078bda68a8d495cc161 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:55:59 2024 -0400 Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool commit b252da5d5319a318af317b0eb5b124733f5da073 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:10:58 2024 -0400 Fix - DB Backup directory not cleaned up #1021 commit ad5555d760191e5e4e37cf7508b5d6f57de5e2cb Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 11:43:43 2024 -0400 RTL-SDR changes since it is not a APT installed package commit d967486f8a9f5e1e98f7bacffdf995af52974121 Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 09:22:53 2024 -0400 Clean up the library cache so any dangling items are cleared * Introduction of RN2 In-Situ Upgrade (#1024) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log to support.sh (#1028) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log --------- Co-authored-by: Sasszem <[email protected]> Co-authored-by: Richard Creasey - AI4Y <[email protected]> Co-authored-by: Jérôme <[email protected]> * Sunsetting legacy Debian 32 bit and Debian 64 bit support * aarch64 support (#1031) * Add toggle for coronal mass GIFs * aarch64 support Fixed typo in README Modified dependencies.yml to support 64-bit Predict and Satdump New script strach_perms.sh to correct /run/user/${UID} after reboot New script set_os_config_kernel8.sh to modify kernel so wxtoimg will run New DEB file for 64-bit predict New DEB file for 64-bit satdump * SatDump update for x64 machines * Modified tools & dependancies Modified dependancies in support of : wxtoimg libraries on ARM64 wxtoimg symbolic link for ARM64 predict on ARM64 Modified tasks in support of : wxtoimg kernel8 Fixing /run/user/uid permissions on reboot * Disabled - name: copy RTL-SDR udev rule We have an intermittant conflict from dualing UDEV rule files. They are identifical, but sometimes cause Satdump not to be able to open RTL-SDR receiver when executed as a non-root user. /usr/lib/udev/rules.d/60-librtlsdr0.rules is installed from OSMON's it clone RTL-SDR software" , which puts /lib/udev/rules.d/60-librtlsdr0.rules in place * rework * Added --fill_missing option to NOAA & METEOR receive scripts * undo "fill_missing" option from NOAA as its for GOES and METEOR only * Hmmm somehow `--fill_missing` got lost when I switched to SatDump live decoding * Adding updated SatDump for armhf built by Richard * Providing support for any Debian based distro * Setting automatic deletion to false to store 3 days worth of audio for archiving and debugging * Fixing the log for the breakpoint * Fixing the log for the break point * Preventing invalid receiver_type and satellite decoders from going past the install script * Adding fix to prevent Gtk-WARNING Modified schedule.sh to unset XTERM variables which would cause NOAA annotations to fail when passes were scheduled via VNC using lxterminal. * Widening the scope of variables to omit when scheduling passes * Added WAYFIRE to omit * Update receive_meteor.sh Backing out --fill_missing to avoid merge conflict with parent * Update receive_noaa.sh - Backing out changes to avoid merge conflict * add bottom - next/previous page in CAPTURE https://github.com/jekhokie/raspberry-noaa-v2/issues/1002 * Ooops... Thanks Jerome! * Updating comments * Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images. Example of warnings... UserWarning: marker is redundantly defined by the 'marker' keyword argument and the fmt string "o" (-> marker='o'). The keyword argument will take precedence. p.plot(az_at_max_elev, max_elev, 'o', marker="*", markersize=12, label="Max El") * Filter out wxtoimg error messages for known/acceptable issue Since the source code to WXTOIMG is not available I used gdc (w/o symbols) and strace and see what is causing the 'free invalid pointer' error. I determined that it happens on application clean up after successfully processing the map overlay file into the final image. Everything is working correctly except the clean up of a 3rd memory location which is failing because it was already removed by the kernel I believe. strace snippet: munmap(0xef6b8000, 20533248) = 0 munmap(0xee323000, 20533248) = 0 munmap(0xecf8e000, 20533248) = 0 writev(2, [{iov_base="free(): invalid pointer", iov_len=23}, {iov_base="\n", iov_len=1}], 2) = 24 The first two munmap calls worked and the third munmap fails as its already deallocated. The munmap() system call deletes the mappings for the specified address range, and causes further references to addresses within the range to generate invalid memory references. The region is also automatically unmapped when the process is terminated. On the other hand, closing the file descriptor does not unmap the region. At this point I'm happy to know it successfully allocated those memory slots for processing mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xef6b8000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xee323000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xecf8e000 but it was freeing up memory on the last address that it threw the error. This modification to receive_noaa.sh is to filter out the 'free invalid pointer' and 'Aborted' messages before its written out to the RN2 log * Filter out wxtoimg error messages for known/acceptable issue * Modified dependencies to support 32-bit wxtoimg on arm64 & amd64 * Modified core.yml to support various flavors of Linux * Removed wxtoimg 320bit support for AMD64 since we have a DEB for it already * Update README.md * Tuning Meteor M2-4 maps in MeteorDemod * Define XDG_RUNTIME_DIR with proper permissions Define XDG_RUNTIME_DIR with proper permissions * Introduction of Verification Tool and RN2 uninstall script (#1019) * Introduction of verification tool The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning f capture/decode/processing of APT telemetry data. Execute the verification script by passing the required argument [ quick | full ] $HOME/raspberry-noaa-v2/scripts/tools/verification.sh Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes) ######### # NOTES # ######### # Dryrun of binaries includes executing : nxing web page returned 200 OK status to confirm Web Portal is up. satdump live capture for 1 second to ensure it runs without error. wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg meteordemod -h is executed to ensure it runs without error. # When FULL mode is choosen meterdemod fully decodes a staged cadu file : meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp * Set 755 on verification.sh Set 755 on verification.sh * Ensure meteordemond working directory exists * Set 755 on build_permissions_list.sh * Update README.md Introduction of new Verification Tool * Update README.md Reformatting Troubleshooting section from lastchange * Update README.md * Script to remove RN2 installation * updated to shutdown nginx before removal * stop php service * Corrected php service name to stop when removing RN2 * further cleanup of services * Tweaked some of the logging messages * updated to remove rtl-sdr package * install script does not install RTL-SDR when it finds source in /tmp * Update caution_uninstall_rn2.sh * Clean up the library cache so any dangling items are cleared & RTL-SDR changes since it is not a APT installed package (#1020) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Delete db backup files that are older than 3 days * Removing old PHP thumbnail selection for Meteor (which didn't work) * Squashed commit of the following: commit 806663a83a01c91a74f214a15d9b2d7b2500f1e7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:41:41 2024 -0400 Corrected variable name commit cd010e0053f8dbe32421e65bd12dae501f879978 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:15:51 2024 -0400 Since verifcation tool is added to install script, conditionally execute from upgrade script commit 8c6ea4e755f5ff469b1463eacb10f6a5f9cb70b7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 06:38:18 2024 -0400 Removed /etc/modprobe.d/rtlsdr.conf commit a5b7821479bf74f9b7c0d0a67998424fde30e642 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 21:24:29 2024 -0400 Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. commit 3c50ae76316a823174ced50e0d68c1bbf2189949 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:17:12 2024 -0400 Added error handling and Improved text in echo for moving RN2 tree commit b375303f75d62f22d852cfd18162fc9bebe1fcdd Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:07:59 2024 -0400 Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name commit 5552f61a62d15f7f9413a6b8b1d99336a2a9c135 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 12:03:14 2024 -0400 Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail commit edd0f4ef45b20aceeccc708729023fb5d9afbc8e Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:36:23 2024 -0400 Corrected /srv restore/Unstage permissions commit 7d91bd16a8cb249e3519b474ea0561624f7d82b4 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:18:53 2024 -0400 Script was renamed to rn2_uninstall.sh and moved to .rn2_utils commit 8c0c56d2ba6ead61105450204862fa665116bf9b Merge: a007035 bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:49:02 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit a00703542ffb999d18f5fe423971e96782408066 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:48:21 2024 -0400 Added tee -a for appending to log file commit bb0d497e96c28a9e260439e3bc46e11766a644d9 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:27:38 2024 -0400 Resolve merge conflict commit a83fda3a95650a5906deeb03b8e8a1851a257ce9 Merge: acb9fc5 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:16:48 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit acb9fc53b8462b90561532eed28bb110efe4a6f2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:14:45 2024 -0400 Script was rename to rn2_uninstall.sh and moved to .rm2_utils commit 3fd34b17f5d79f00e2ec9bb24ade1cc958bf3ee2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:08:22 2024 -0400 Update README.md - In-Situ Upgrade commit 4f97fae0760b4fd1f0d02078bda68a8d495cc161 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:55:59 2024 -0400 Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool commit b252da5d5319a318af317b0eb5b124733f5da073 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:10:58 2024 -0400 Fix - DB Backup directory not cleaned up #1021 commit ad5555d760191e5e4e37cf7508b5d6f57de5e2cb Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 11:43:43 2024 -0400 RTL-SDR changes since it is not a APT installed package commit d967486f8a9f5e1e98f7bacffdf995af52974121 Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 09:22:53 2024 -0400 Clean up the library cache so any dangling items are cleared * Introduction of RN2 In-Situ Upgrade (#1024) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log to support.sh (#1028) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log --------- Co-authored-by: Sasszem <[email protected]> Co-authored-by: Richard Creasey - AI4Y <[email protected]> Co-authored-by: Jérôme <[email protected]> * Rebooting the Pi automatically after the first install * Fixing filling issue for SatDump Meteor images * Fixing filling issue for Meteor when decoding with SatDump * Update README.md (#1037) * Update core.yml - Simply getting OS Release (#1038) Update core.yml - Simply getting OS Release Goal was to work on as many as Debian Distro's as possible even if they are using local repo's * Update README.md (#1043) * Update rn2_uninstall.sh (#1045) Commenting out systemctl disable service because disable causes it to remain disabled even after the service is removed and reinstalled by Ansible Commenting out the disable command has no impact since it will be removed when removing packages * Update verification.sh (#1046) Ooops... I had hard coded /home/richard , fixed with ${HOME} * Beta development - Setting SDR Device ID, Fixed Receive scripts to pass PPM Offset, Fixed dependancies to work on OS Lite versions (#1049) * Setting SDR Device ID * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md - fixed mispelling * Update setting_sdr_source_id.md - Fixed 2nd typo * Update setting_sdr_source_id.md - Fixed more typo's (SMH) * Update setting_sdr_source_id.md - Reformatting * Update setting_sdr_source_id.md * beta-development - Pass missing --ppm_correction parameter to satdump Tested PPM Offset was passed and processed by satdump correctly when receive scripts were called from AT jobs with settings.yml values of : noaa_15_freq_offset: -2 noaa_18_freq_offset: -1 noaa_19_freq_offset: 0 meteor_m2_3_freq_offset: 1 meteor_m2_4_freq_offset: 2 * beta-development - bug fix - OS Lite versions Bookworm 64 & Bullseye 32 OS Lite versions Bookworm 64 & Bullseye 32 fail on fresh OS install I have tested this fix on Bookworm 64-bit full & lite as well as Bullseye 32-bit Full/lite OS Lite versions do not have .config, but when its created as as part of the .config/meteordemod task below The .config ownership of top directory is root:root 755 when this happens and it needs to be target_user:target_user 700 * Clean up Bogus config/annotation directory created under $HOME RN2 installs have been placing a second config/annotation directory under ${HOME} which is not used. As part of this clean up the verification tool permissions list has this directory and is sub directory removed from being checked. * Removed unneeded task * Fix to be tested * Fix to be tested for RTL-SDR PPM correction (#1051) * Fixing filling issue for SatDump Meteor images * Fix to be tested * Beta development - modified receive scripts to pass PPM & Offset based on receiver type (#1052) * Setting SDR Device ID * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md - fixed mispelling * Update setting_sdr_source_id.md - Fixed 2nd typo * Update setting_sdr_source_id.md - Fixed more typo's (SMH) * Update setting_sdr_source_id.md - Reformatting * Update setting_sdr_source_id.md * beta-development - Pass missing --ppm_correction parameter to satdump Tested PPM Offset was passed and processed by satdump correctly when receive scripts were called from AT jobs with settings.yml values of : noaa_15_freq_offset: -2 noaa_18_freq_offset: -1 noaa_19_freq_offset: 0 meteor_m2_3_freq_offset: 1 meteor_m2_4_freq_offset: 2 * beta-development - bug fix - OS Lite versions Bookworm 64 & Bullseye 32 OS Lite versions Bookworm 64 & Bullseye 32 fail on fresh OS install I have tested this fix on Bookworm 64-bit full & lite as well as Bullseye 32-bit Full/lite OS Lite versions do not have .config, but when its created as as part of the .config/meteordemod task below The .config ownership of top directory is root:root 755 when this happens and it needs to be target_user:target_user 700 * Clean up Bogus config/annotation directory created under $HOME RN2 installs have been placing a second config/annotation directory under ${HOME} which is not used. As part of this clean up the verification tool permissions list has this directory and is sub directory removed from being checked. * Removed unneeded task * Reverting PPM changes to receive scripts ppm_correction should only be used for RTPSDR and RTL-TCP, there may be other receivers that can use it but unknown * Update noaa-v2.conf.j2 This was left out of ansible/roles/common/templates/noaa-v2.conf.j2 template file which caused an error for anyone enabling it. # Coronal mass ejection activity ENABLE_CORONAL={{ enable_coronal|lower }} * modified receive scripts to pass PPM & Offset based on receiver type Modified receivenoaa.sh & receive_meteor.sh scripts to pass PPM & Offset based on receiver type. Also added a log statement so everybody can see whats getting sent to satdump from output.log /home/richard/raspberry-noaa-v2/scripts/receive_noaa.sh "NOAA 18" NOAA-18-20240813-153343 /home/richard/raspberry-noaa-v2/tmp/orbit.tle 1723563223 3 32 Southbound E # I added setting FREQ_OFFSET="" when its not an rtlsdr receiver to prevent the Offset being passed to satdump if [[ "$receiver" == "rtlsdr" ]]; then gain_option="--gain" ppm_correction="--ppm_correction" else gain_option="--general_gain" FREQ_OFFSET="" fi I tested it for NOAA 18 and you can see PPM and Offset was passed to satdump as desired: richard@raspberrypi:~$ /home/richard/raspberry-noaa-v2/scripts/receive_noaa.sh "NOAA 18" NOAA-18-20240813-153343 /home/richard/raspberry-noaa-v2/tmp/orbit.tle 1723563223 3 32 Southbound E INFO : The system has enough space to store a NOAA pass on RAM INFO : Free : 7454 ; Required : 50 INFO : Direction Southbound INFO : Cropping SatDump NOAA images enabled INFO : Recording /home/richard/raspberry-noaa-v2 via rtlsdr at MHz via SatDump live pipeline INFO : /usr/bin/satdump live noaa_apt . --source rtlsdr --samplerate 1.024e6 --ppm_correction 0 --frequency 137.9125e6 --satellite_number 18 --sdrpp_noise_reduction --gain 49.6 --autocrop_wedges --start_timestamp 1723563313 --save_wav --timeout 3 INFO : Files recorded INFO : Resampling down audio INFO : Producing pristine image INFO : Bulding pass map Satdump log shows ppm was passed 14:08:43 - 13/08/2024] (D) Parameters : [14:08:43 - 13/08/2024] (D) - align_timestamps : true [14:08:43 - 13/08/2024] (D) - audio_samplerate : 50000.0 [14:08:43 - 13/08/2024] (D) - autocrop_wedges : true [14:08:43 - 13/08/2024] (D) - baseband_format : "cf32" [14:08:43 - 13/08/2024] (D) - buffer_size : 1000000 [14:08:43 - 13/08/2024] (D) - frequency : 137912500 [14:08:43 - 13/08/2024] (D) - gain : 49.6 [14:08:43 - 13/08/2024] (D) - max_crop_stddev : 3500 [14:08:43 - 13/08/2024] (D) - ppm_correction : 0 [14:08:43 - 13/08/2024] (D) - samplerate : 1024000 # Since I don't have another SDR receiver type, I flipped the logic to test that neither --ppm_correction or Offset values were passed to setdump using: if [[ "$receiver" == "rtlsdr" ]]; then gain_option="--general_gain" FREQ_OFFSET="" else gain_option="--gain" ppm_correction="--ppm_correction" fi richard@raspberrypi:~$ /home/richard/raspberry-noaa-v2/scripts/receive_noaa.sh "NOAA 18" NOAA-18-20240813-153343 /home/richard/raspberry-noaa-v2/tmp/orbit.tle 1723563223 3 32 Southbound E INFO : The system has enough space to store a NOAA pass on RAM INFO : Free : 7452 ; Required : 50 INFO : Direction Southbound INFO : Cropping SatDump NOAA images enabled INFO : Recording /home/richard/raspberry-noaa-v2 via rtlsdr at MHz via SatDump live pipeline INFO : /usr/bin/satdump live noaa_apt . --source rtlsdr --samplerate 1.024e6 --frequency 137.9125e6 --satellite_number 18 --sdrpp_noise_reduction --general_gain 49.6 --autocrop_wedges --start_timestamp 1723563313 --save_wav --timeout 3 ^CINFO : Files recorded INFO : Resampling down audio INFO : Producing pristine image INFO : Bulding pass map Satdump log shows ppm & offset was not passed [14:11:17 - 13/08/2024] (D) Parameters : [14:11:17 - 13/08/2024] (D) - align_timestamps : true [14:11:17 - 13/08/2024] (D) - audio_samplerate : 50000.0 [14:11:17 - 13/08/2024] (D) - autocrop_wedges : true [14:11:17 - 13/08/2024] (D) - baseband_format : "cf32" [14:11:17 - 13/08/2024] (D) - buffer_size : 1000000 [14:11:17 - 13/08/2024] (D) - frequency : 137912500 [14:11:17 - 13/08/2024] (D) - general_gain : 49.6 [14:11:17 - 13/08/2024] (D) - max_crop_stddev : 3500 [14:11:17 - 13/08/2024] (D) - samplerate : 1024000 I modified receive_metoer.sh and performed the same testing /home/richard/raspberry-noaa-v2/scripts/receive_meteor.sh "METEOR-M2 4" METEOR-M2-4-20240813-194754 /home/richard/raspberry-noaa-v2/tmp/orbit.tle 1723578474 3 83 Northbound W I tested it for M2-4 and you can see PPM and Offset was passed to satdump as desired: INFO : The system has enough space to store a Meteor pass on RAM INFO : Free : 7462 ; Required : 10 INFO : Direction Northbound INFO : I'll flip this image pass because FLIP_METEOR_IMG is set to true and PASS_DIRECTION is Northbound INFO : Recording /home/richard/raspberry-noaa-v2 via rtlsdr at 137.9000 MHz using SatDump record INFO : /usr/bin/satdump live meteor_m2-x_lrpt . --source rtlsdr --samplerate 1.024e6 --ppm_correction 0 --frequency 137.9000e6 --gain 49.6 --fill_missing --timeout 3 INFO : Removing old bmp, gcp, and dat files INFO : Running MeteorDemod to demodulate OQPSK file, rectify (spread) images, create heat map and composites and convert them to JPG INFO : Waiting for files to close Satdump log shows ppm was passed [14:32:22 - 13/08/2024] (D) Parameters : [14:32:22 - 13/08/2024] (D) - baseband_format : "cf32" [14:32:22 - 13/08/2024] (D) - buffer_size : 1000000 [14:32:22 - 13/08/2024] (D) - cadu_size : 8192 [14:32:22 - 13/08/2024] (D) - constellation : "oqpsk" [14:32:22 - 13/08/2024] (D) - derandomize : true [14:32:22 - 13/08/2024] (D) - fill_missing : true [14:32:22 - 13/08/2024] (D) - frequency : 137900000 [14:32:22 - 13/08/2024] (D) - gain : 49.6 [14:32:22 - 13/08/2024] (D) - nrzm : true [14:32:22 - 13/08/2024] (D) - ppm_correction : 0 [14:32:22 - 13/08/2024] (D) - rs_dualbasis : false [14:32:22 - 13/08/2024] (D) - rs_i : 4 [14:32:22 - 13/08/2024] (D) - rs_type : "rs223" [14:32:22 - 13/08/2024] (D) - rs_usecheck : true [14:32:22 - 13/08/2024] (D) - samplerate : 1024000 # Since I don't have another SDR receiver type, I flipped the logic to test that neither --ppm_correction or Offset values were passed to setdump using: NFO : The system has enough space to store a Meteor pass on RAM INFO : Free : 7463 ; Required : 10 INFO : Direction Northbound INFO : I'll flip this image pass because FLIP_METEOR_IMG is set to true and PASS_DIRECTION is Northbound INFO : Recording /home/richard/raspberry-noaa-v2 via rtlsdr at 137.9000 MHz using SatDump record INFO : /usr/bin/satdump live meteor_m2-x_lrpt . --source rtlsdr --samplerate 1.024e6 --frequency 137.9000e6 --general_gain 49.6 --fill_missing --timeout 3 INFO : Removing old bmp, gcp, and dat files INFO : Running MeteorDemod to demodulate OQPSK file, rectify (spread) images, create heat map and composites and convert them to JPG INFO : Waiting for files to close Satdump log shows ppm & offset was not passed [14:35:06 - 13/08/2024] (D) Parameters : [14:35:06 - 13/08/2024] (D) - baseband_format : "cf32" [14:35:06 - 13/08/2024] (D) - buffer_size : 1000000 [14:35:06 - 13/08/2024] (D) - cadu_size : 8192 [14:35:06 - 13/08/2024] (D) - constellation : "oqpsk" [14:35:06 - 13/08/2024] (D) - derandomize : true [14:35:06 - 13/08/2024] (D) - fill_missing : true [14:35:06 - 13/08/2024] (D) - frequency : 137900000 [14:35:06 - 13/08/2024] (D) - general_gain : 49.6 [14:35:06 - 13/08/2024] (D) - nrzm : true [14:35:06 - 13/08/2024] (D) - rs_dualbasis : false [14:35:06 - 13/08/2024] (D) - rs_i : 4 [14:35:06 - 13/08/2024] (D) - rs_type : "rs223" [14:35:06 - 13/08/2024] (D) - rs_usecheck : true [14:35:06 - 13/08/2024] (D) - samplerate : 1024000 * Ensure ownership/permissions are set correctly for key scripts * Ensure ownership/permissions are set correctly for key scripts --------- Co-authored-by: MihajloPi - YU4MPI <[email protected]> * Changing config directory ownership as root * Removing whitespaces * Ooops... * Allow odd timezones in sun.py (#1056) * fixes #1021 * fixes #1055 * Fix deprecation warning in heatmap.py (#1059) * fixes #1021 * fixes deprecation message for getsize and ANTIALIAS (will be removed in Pillow 10) * Beta development - Update dependencies/yml - added become: yes for .config ownership (#1057) * Setting SDR Device ID * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md - fixed mispelling * Update setting_sdr_source_id.md - Fixed 2nd typo * Update setting_sdr_source_id.md - Fixed more typo's (SMH) * Update setting_sdr_source_id.md - Reformatting * Update setting_sdr_source_id.md * beta-development - Pass missing --ppm_correction parameter to satdump Tested PPM Offset was passed and processed by satdump correctly when receive scripts were called from AT jobs with settings.yml values of : noaa_15_freq_offset: -2 noaa_18_freq_offset: -1 noaa_19_freq_offset: 0 meteor_m2_3_freq_offset: 1 meteor_m2_4_freq_offset: 2 * beta-development - bug fix - OS Lite versions Bookworm 64 & Bullseye 32 OS Lite versions Bookworm 64 & Bullseye 32 fail on fresh OS install I have tested this fix on Bookworm 64-bit full & lite as well as Bullseye 32-bit Full/lite OS Lite versions do not have .config, but when its created as as part of the .config/meteordemod task below The .config ownership of top directory is root:root 755 when this happens and it needs to be target_user:target_user 700 * Clean up Bogus config/annotation directory created under $HOME RN2 installs ha…

* Add toggle for coronal mass GIFs * aarch64 support Fixed typo in README Modified dependencies.yml to support 64-bit Predict and Satdump New script strach_perms.sh to correct /run/user/${UID} after reboot New script set_os_config_kernel8.sh to modify kernel so wxtoimg will run New DEB file for 64-bit predict New DEB file for 64-bit satdump * SatDump update for x64 machines * Modified tools & dependancies Modified dependancies in support of : wxtoimg libraries on ARM64 wxtoimg symbolic link for ARM64 predict on ARM64 Modified tasks in support of : wxtoimg kernel8 Fixing /run/user/uid permissions on reboot * Disabled - name: copy RTL-SDR udev rule We have an intermittant conflict from dualing UDEV rule files. They are identifical, but sometimes cause Satdump not to be able to open RTL-SDR receiver when executed as a non-root user. /usr/lib/udev/rules.d/60-librtlsdr0.rules is installed from OSMON's it clone RTL-SDR software" , which puts /lib/udev/rules.d/60-librtlsdr0.rules in place * rework * Added --fill_missing option to NOAA & METEOR receive scripts * undo "fill_missing" option from NOAA as its for GOES and METEOR only * Hmmm somehow `--fill_missing` got lost when I switched to SatDump live decoding * Adding updated SatDump for armhf built by Richard * Providing support for any Debian based distro * Setting automatic deletion to false to store 3 days worth of audio for archiving and debugging * Fixing the log for the breakpoint * Fixing the log for the break point * Preventing invalid receiver_type and satellite decoders from going past the install script * Adding fix to prevent Gtk-WARNING Modified schedule.sh to unset XTERM variables which would cause NOAA annotations to fail when passes were scheduled via VNC using lxterminal. * Widening the scope of variables to omit when scheduling passes * Added WAYFIRE to omit * Update receive_meteor.sh Backing out --fill_missing to avoid merge conflict with parent * Update receive_noaa.sh - Backing out changes to avoid merge conflict * add bottom - next/previous page in CAPTURE https://github.com/jekhokie/raspberry-noaa-v2/issues/1002 * Ooops... Thanks Jerome! * Updating comments * Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images. Example of warnings... UserWarning: marker is redundantly defined by the 'marker' keyword argument and the fmt string "o" (-> marker='o'). The keyword argument will take precedence. p.plot(az_at_max_elev, max_elev, 'o', marker="*", markersize=12, label="Max El") * Filter out wxtoimg error messages for known/acceptable issue Since the source code to WXTOIMG is not available I used gdc (w/o symbols) and strace and see what is causing the 'free invalid pointer' error. I determined that it happens on application clean up after successfully processing the map overlay file into the final image. Everything is working correctly except the clean up of a 3rd memory location which is failing because it was already removed by the kernel I believe. strace snippet: munmap(0xef6b8000, 20533248) = 0 munmap(0xee323000, 20533248) = 0 munmap(0xecf8e000, 20533248) = 0 writev(2, [{iov_base="free(): invalid pointer", iov_len=23}, {iov_base="\n", iov_len=1}], 2) = 24 The first two munmap calls worked and the third munmap fails as its already deallocated. The munmap() system call deletes the mappings for the specified address range, and causes further references to addresses within the range to generate invalid memory references. The region is also automatically unmapped when the process is terminated. On the other hand, closing the file descriptor does not unmap the region. At this point I'm happy to know it successfully allocated those memory slots for processing mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xef6b8000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xee323000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xecf8e000 but it was freeing up memory on the last address that it threw the error. This modification to receive_noaa.sh is to filter out the 'free invalid pointer' and 'Aborted' messages before its written out to the RN2 log * Filter out wxtoimg error messages for known/acceptable issue * Modified dependencies to support 32-bit wxtoimg on arm64 & amd64 * Modified core.yml to support various flavors of Linux * Removed wxtoimg 320bit support for AMD64 since we have a DEB for it already * Update README.md * Tuning Meteor M2-4 maps in MeteorDemod * Define XDG_RUNTIME_DIR with proper permissions Define XDG_RUNTIME_DIR with proper permissions * Introduction of Verification Tool and RN2 uninstall script (#1019) * Introduction of verification tool The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning f capture/decode/processing of APT telemetry data. Execute the verification script by passing the required argument [ quick | full ] $HOME/raspberry-noaa-v2/scripts/tools/verification.sh Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes) ######### # NOTES # ######### # Dryrun of binaries includes executing : nxing web page returned 200 OK status to confirm Web Portal is up. satdump live capture for 1 second to ensure it runs without error. wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg meteordemod -h is executed to ensure it runs without error. # When FULL mode is choosen meterdemod fully decodes a staged cadu file : meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp * Set 755 on verification.sh Set 755 on verification.sh * Ensure meteordemond working directory exists * Set 755 on build_permissions_list.sh * Update README.md Introduction of new Verification Tool * Update README.md Reformatting Troubleshooting section from lastchange * Update README.md * Script to remove RN2 installation * updated to shutdown nginx before removal * stop php service * Corrected php service name to stop when removing RN2 * further cleanup of services * Tweaked some of the logging messages * updated to remove rtl-sdr package * install script does not install RTL-SDR when it finds source in /tmp * Update caution_uninstall_rn2.sh * Clean up the library cache so any dangling items are cleared & RTL-SDR changes since it is not a APT installed package (#1020) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Delete db backup files that are older than 3 days * Removing old PHP thumbnail selection for Meteor (which didn't work) * Squashed commit of the following: commit 806663a83a01c91a74f214a15d9b2d7b2500f1e7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:41:41 2024 -0400 Corrected variable name commit cd010e0053f8dbe32421e65bd12dae501f879978 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:15:51 2024 -0400 Since verifcation tool is added to install script, conditionally execute from upgrade script commit 8c6ea4e755f5ff469b1463eacb10f6a5f9cb70b7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 06:38:18 2024 -0400 Removed /etc/modprobe.d/rtlsdr.conf commit a5b7821479bf74f9b7c0d0a67998424fde30e642 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 21:24:29 2024 -0400 Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. commit 3c50ae76316a823174ced50e0d68c1bbf2189949 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:17:12 2024 -0400 Added error handling and Improved text in echo for moving RN2 tree commit b375303f75d62f22d852cfd18162fc9bebe1fcdd Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:07:59 2024 -0400 Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name commit 5552f61a62d15f7f9413a6b8b1d99336a2a9c135 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 12:03:14 2024 -0400 Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail commit edd0f4ef45b20aceeccc708729023fb5d9afbc8e Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:36:23 2024 -0400 Corrected /srv restore/Unstage permissions commit 7d91bd16a8cb249e3519b474ea0561624f7d82b4 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:18:53 2024 -0400 Script was renamed to rn2_uninstall.sh and moved to .rn2_utils commit 8c0c56d2ba6ead61105450204862fa665116bf9b Merge: a007035 bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:49:02 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit a00703542ffb999d18f5fe423971e96782408066 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:48:21 2024 -0400 Added tee -a for appending to log file commit bb0d497e96c28a9e260439e3bc46e11766a644d9 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:27:38 2024 -0400 Resolve merge conflict commit a83fda3a95650a5906deeb03b8e8a1851a257ce9 Merge: acb9fc5 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:16:48 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit acb9fc53b8462b90561532eed28bb110efe4a6f2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:14:45 2024 -0400 Script was rename to rn2_uninstall.sh and moved to .rm2_utils commit 3fd34b17f5d79f00e2ec9bb24ade1cc958bf3ee2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:08:22 2024 -0400 Update README.md - In-Situ Upgrade commit 4f97fae0760b4fd1f0d02078bda68a8d495cc161 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:55:59 2024 -0400 Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool commit b252da5d5319a318af317b0eb5b124733f5da073 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:10:58 2024 -0400 Fix - DB Backup directory not cleaned up #1021 commit ad5555d760191e5e4e37cf7508b5d6f57de5e2cb Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 11:43:43 2024 -0400 RTL-SDR changes since it is not a APT installed package commit d967486f8a9f5e1e98f7bacffdf995af52974121 Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 09:22:53 2024 -0400 Clean up the library cache so any dangling items are cleared * Introduction of RN2 In-Situ Upgrade (#1024) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log to support.sh (#1028) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log * aarch64/arm64 support and general fixes (#1029) * Add toggle for coronal mass GIFs * aarch64 support Fixed typo in README Modified dependencies.yml to support 64-bit Predict and Satdump New script strach_perms.sh to correct /run/user/${UID} after reboot New script set_os_config_kernel8.sh to modify kernel so wxtoimg will run New DEB file for 64-bit predict New DEB file for 64-bit satdump * SatDump update for x64 machines * Modified tools & dependancies Modified dependancies in support of : wxtoimg libraries on ARM64 wxtoimg symbolic link for ARM64 predict on ARM64 Modified tasks in support of : wxtoimg kernel8 Fixing /run/user/uid permissions on reboot * Disabled - name: copy RTL-SDR udev rule We have an intermittant conflict from dualing UDEV rule files. They are identifical, but sometimes cause Satdump not to be able to open RTL-SDR receiver when executed as a non-root user. /usr/lib/udev/rules.d/60-librtlsdr0.rules is installed from OSMON's it clone RTL-SDR software" , which puts /lib/udev/rules.d/60-librtlsdr0.rules in place * rework * Added --fill_missing option to NOAA & METEOR receive scripts * undo "fill_missing" option from NOAA as its for GOES and METEOR only * Hmmm somehow `--fill_missing` got lost when I switched to SatDump live decoding * Adding updated SatDump for armhf built by Richard * Providing support for any Debian based distro * Setting automatic deletion to false to store 3 days worth of audio for archiving and debugging * Fixing the log for the breakpoint * Fixing the log for the break point * Preventing invalid receiver_type and satellite decoders from going past the install script * Adding fix to prevent Gtk-WARNING Modified schedule.sh to unset XTERM variables which would cause NOAA annotations to fail when passes were scheduled via VNC using lxterminal. * Widening the scope of variables to omit when scheduling passes * Added WAYFIRE to omit * Update receive_meteor.sh Backing out --fill_missing to avoid merge conflict with parent * Update receive_noaa.sh - Backing out changes to avoid merge conflict * add bottom - next/previous page in CAPTURE https://github.com/jekhokie/raspberry-noaa-v2/issues/1002 * Ooops... Thanks Jerome! * Updating comments * Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images. Example of warnings... UserWarning: marker is redundantly defined by the 'marker' keyword argument and the fmt string "o" (-> marker='o'). The keyword argument will take precedence. p.plot(az_at_max_elev, max_elev, 'o', marker="*", markersize=12, label="Max El") * Filter out wxtoimg error messages for known/acceptable issue Since the source code to WXTOIMG is not available I used gdc (w/o symbols) and strace and see what is causing the 'free invalid pointer' error. I determined that it happens on application clean up after successfully processing the map overlay file into the final image. Everything is working correctly except the clean up of a 3rd memory location which is failing because it was already removed by the kernel I believe. strace snippet: munmap(0xef6b8000, 20533248) = 0 munmap(0xee323000, 20533248) = 0 munmap(0xecf8e000, 20533248) = 0 writev(2, [{iov_base="free(): invalid pointer", iov_len=23}, {iov_base="\n", iov_len=1}], 2) = 24 The first two munmap calls worked and the third munmap fails as its already deallocated. The munmap() system call deletes the mappings for the specified address range, and causes further references to addresses within the range to generate invalid memory references. The region is also automatically unmapped when the process is terminated. On the other hand, closing the file descriptor does not unmap the region. At this point I'm happy to know it successfully allocated those memory slots for processing mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xef6b8000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xee323000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xecf8e000 but it was freeing up memory on the last address that it threw the error. This modification to receive_noaa.sh is to filter out the 'free invalid pointer' and 'Aborted' messages before its written out to the RN2 log * Filter out wxtoimg error messages for known/acceptable issue * Modified dependencies to support 32-bit wxtoimg on arm64 & amd64 * Modified core.yml to support various flavors of Linux * Removed wxtoimg 320bit support for AMD64 since we have a DEB for it already * Update README.md * Tuning Meteor M2-4 maps in MeteorDemod * Define XDG_RUNTIME_DIR with proper permissions Define XDG_RUNTIME_DIR with proper permissions * Introduction of Verification Tool and RN2 uninstall script (#1019) * Introduction of verification tool The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning f capture/decode/processing of APT telemetry data. Execute the verification script by passing the required argument [ quick | full ] $HOME/raspberry-noaa-v2/scripts/tools/verification.sh Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes) ######### # NOTES # ######### # Dryrun of binaries includes executing : nxing web page returned 200 OK status to confirm Web Portal is up. satdump live capture for 1 second to ensure it runs without error. wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg meteordemod -h is executed to ensure it runs without error. # When FULL mode is choosen meterdemod fully decodes a staged cadu file : meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp * Set 755 on verification.sh Set 755 on verification.sh * Ensure meteordemond working directory exists * Set 755 on build_permissions_list.sh * Update README.md Introduction of new Verification Tool * Update README.md Reformatting Troubleshooting section from lastchange * Update README.md * Script to remove RN2 installation * updated to shutdown nginx before removal * stop php service * Corrected php service name to stop when removing RN2 * further cleanup of services * Tweaked some of the logging messages * updated to remove rtl-sdr package * install script does not install RTL-SDR when it finds source in /tmp * Update caution_uninstall_rn2.sh * Clean up the library cache so any dangling items are cleared & RTL-SDR changes since it is not a APT installed package (#1020) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Delete db backup files that are older than 3 days * Removing old PHP thumbnail selection for Meteor (which didn't work) * Squashed commit of the following: commit 806663a83a01c91a74f214a15d9b2d7b2500f1e7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:41:41 2024 -0400 Corrected variable name commit cd010e0053f8dbe32421e65bd12dae501f879978 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:15:51 2024 -0400 Since verifcation tool is added to install script, conditionally execute from upgrade script commit 8c6ea4e755f5ff469b1463eacb10f6a5f9cb70b7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 06:38:18 2024 -0400 Removed /etc/modprobe.d/rtlsdr.conf commit a5b7821479bf74f9b7c0d0a67998424fde30e642 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 21:24:29 2024 -0400 Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. commit 3c50ae76316a823174ced50e0d68c1bbf2189949 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:17:12 2024 -0400 Added error handling and Improved text in echo for moving RN2 tree commit b375303f75d62f22d852cfd18162fc9bebe1fcdd Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:07:59 2024 -0400 Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name commit 5552f61a62d15f7f9413a6b8b1d99336a2a9c135 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 12:03:14 2024 -0400 Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail commit edd0f4ef45b20aceeccc708729023fb5d9afbc8e Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:36:23 2024 -0400 Corrected /srv restore/Unstage permissions commit 7d91bd16a8cb249e3519b474ea0561624f7d82b4 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:18:53 2024 -0400 Script was renamed to rn2_uninstall.sh and moved to .rn2_utils commit 8c0c56d2ba6ead61105450204862fa665116bf9b Merge: a007035 bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:49:02 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit a00703542ffb999d18f5fe423971e96782408066 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:48:21 2024 -0400 Added tee -a for appending to log file commit bb0d497e96c28a9e260439e3bc46e11766a644d9 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:27:38 2024 -0400 Resolve merge conflict commit a83fda3a95650a5906deeb03b8e8a1851a257ce9 Merge: acb9fc5 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:16:48 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit acb9fc53b8462b90561532eed28bb110efe4a6f2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:14:45 2024 -0400 Script was rename to rn2_uninstall.sh and moved to .rm2_utils commit 3fd34b17f5d79f00e2ec9bb24ade1cc958bf3ee2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:08:22 2024 -0400 Update README.md - In-Situ Upgrade commit 4f97fae0760b4fd1f0d02078bda68a8d495cc161 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:55:59 2024 -0400 Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool commit b252da5d5319a318af317b0eb5b124733f5da073 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:10:58 2024 -0400 Fix - DB Backup directory not cleaned up #1021 commit ad5555d760191e5e4e37cf7508b5d6f57de5e2cb Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 11:43:43 2024 -0400 RTL-SDR changes since it is not a APT installed package commit d967486f8a9f5e1e98f7bacffdf995af52974121 Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 09:22:53 2024 -0400 Clean up the library cache so any dangling items are cleared * Introduction of RN2 In-Situ Upgrade (#1024) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log to support.sh (#1028) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log --------- Co-authored-by: Sasszem <[email protected]> Co-authored-by: Richard Creasey - AI4Y <[email protected]> Co-authored-by: Jérôme <[email protected]> * Sunsetting legacy Debian 32 bit and Debian 64 bit support * aarch64 support (#1031) * Add toggle for coronal mass GIFs * aarch64 support Fixed typo in README Modified dependencies.yml to support 64-bit Predict and Satdump New script strach_perms.sh to correct /run/user/${UID} after reboot New script set_os_config_kernel8.sh to modify kernel so wxtoimg will run New DEB file for 64-bit predict New DEB file for 64-bit satdump * SatDump update for x64 machines * Modified tools & dependancies Modified dependancies in support of : wxtoimg libraries on ARM64 wxtoimg symbolic link for ARM64 predict on ARM64 Modified tasks in support of : wxtoimg kernel8 Fixing /run/user/uid permissions on reboot * Disabled - name: copy RTL-SDR udev rule We have an intermittant conflict from dualing UDEV rule files. They are identifical, but sometimes cause Satdump not to be able to open RTL-SDR receiver when executed as a non-root user. /usr/lib/udev/rules.d/60-librtlsdr0.rules is installed from OSMON's it clone RTL-SDR software" , which puts /lib/udev/rules.d/60-librtlsdr0.rules in place * rework * Added --fill_missing option to NOAA & METEOR receive scripts * undo "fill_missing" option from NOAA as its for GOES and METEOR only * Hmmm somehow `--fill_missing` got lost when I switched to SatDump live decoding * Adding updated SatDump for armhf built by Richard * Providing support for any Debian based distro * Setting automatic deletion to false to store 3 days worth of audio for archiving and debugging * Fixing the log for the breakpoint * Fixing the log for the break point * Preventing invalid receiver_type and satellite decoders from going past the install script * Adding fix to prevent Gtk-WARNING Modified schedule.sh to unset XTERM variables which would cause NOAA annotations to fail when passes were scheduled via VNC using lxterminal. * Widening the scope of variables to omit when scheduling passes * Added WAYFIRE to omit * Update receive_meteor.sh Backing out --fill_missing to avoid merge conflict with parent * Update receive_noaa.sh - Backing out changes to avoid merge conflict * add bottom - next/previous page in CAPTURE https://github.com/jekhokie/raspberry-noaa-v2/issues/1002 * Ooops... Thanks Jerome! * Updating comments * Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images Modified polar_plot.py to resolve warning when generating AZ/EL & Direction images. Example of warnings... UserWarning: marker is redundantly defined by the 'marker' keyword argument and the fmt string "o" (-> marker='o'). The keyword argument will take precedence. p.plot(az_at_max_elev, max_elev, 'o', marker="*", markersize=12, label="Max El") * Filter out wxtoimg error messages for known/acceptable issue Since the source code to WXTOIMG is not available I used gdc (w/o symbols) and strace and see what is causing the 'free invalid pointer' error. I determined that it happens on application clean up after successfully processing the map overlay file into the final image. Everything is working correctly except the clean up of a 3rd memory location which is failing because it was already removed by the kernel I believe. strace snippet: munmap(0xef6b8000, 20533248) = 0 munmap(0xee323000, 20533248) = 0 munmap(0xecf8e000, 20533248) = 0 writev(2, [{iov_base="free(): invalid pointer", iov_len=23}, {iov_base="\n", iov_len=1}], 2) = 24 The first two munmap calls worked and the third munmap fails as its already deallocated. The munmap() system call deletes the mappings for the specified address range, and causes further references to addresses within the range to generate invalid memory references. The region is also automatically unmapped when the process is terminated. On the other hand, closing the file descriptor does not unmap the region. At this point I'm happy to know it successfully allocated those memory slots for processing mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xef6b8000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xee323000 mmap2(NULL, 20533248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xecf8e000 but it was freeing up memory on the last address that it threw the error. This modification to receive_noaa.sh is to filter out the 'free invalid pointer' and 'Aborted' messages before its written out to the RN2 log * Filter out wxtoimg error messages for known/acceptable issue * Modified dependencies to support 32-bit wxtoimg on arm64 & amd64 * Modified core.yml to support various flavors of Linux * Removed wxtoimg 320bit support for AMD64 since we have a DEB for it already * Update README.md * Tuning Meteor M2-4 maps in MeteorDemod * Define XDG_RUNTIME_DIR with proper permissions Define XDG_RUNTIME_DIR with proper permissions * Introduction of Verification Tool and RN2 uninstall script (#1019) * Introduction of verification tool The verification tool can be used to help identify RN2 installation/configuration issues which may potentially prevent proper functioning f capture/decode/processing of APT telemetry data. Execute the verification script by passing the required argument [ quick | full ] $HOME/raspberry-noaa-v2/scripts/tools/verification.sh Argument required: ./verification.sh quick or ./verification.sh full (~ 1 minute) (~ 5 minutes) ######### # NOTES # ######### # Dryrun of binaries includes executing : nxing web page returned 200 OK status to confirm Web Portal is up. satdump live capture for 1 second to ensure it runs without error. wxmap generates an overlay map image which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-map-output.png wxtoimg generates MCIR enhanced image which can be founnd : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/wxtoimg-mcir-output.jpg meteordemod -h is executed to ensure it runs without error. # When FULL mode is choosen meterdemod fully decodes a staged cadu file : meteordemod generates a full set of images which can be found : $HOME/raspberry-noaa-v2/scripts/tools/verification_tool/test_files/tmp * Set 755 on verification.sh Set 755 on verification.sh * Ensure meteordemond working directory exists * Set 755 on build_permissions_list.sh * Update README.md Introduction of new Verification Tool * Update README.md Reformatting Troubleshooting section from lastchange * Update README.md * Script to remove RN2 installation * updated to shutdown nginx before removal * stop php service * Corrected php service name to stop when removing RN2 * further cleanup of services * Tweaked some of the logging messages * updated to remove rtl-sdr package * install script does not install RTL-SDR when it finds source in /tmp * Update caution_uninstall_rn2.sh * Clean up the library cache so any dangling items are cleared & RTL-SDR changes since it is not a APT installed package (#1020) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Delete db backup files that are older than 3 days * Removing old PHP thumbnail selection for Meteor (which didn't work) * Squashed commit of the following: commit 806663a83a01c91a74f214a15d9b2d7b2500f1e7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:41:41 2024 -0400 Corrected variable name commit cd010e0053f8dbe32421e65bd12dae501f879978 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 07:15:51 2024 -0400 Since verifcation tool is added to install script, conditionally execute from upgrade script commit 8c6ea4e755f5ff469b1463eacb10f6a5f9cb70b7 Author: Richard Creasey - AI4Y <[email protected]> Date: Tue Jul 30 06:38:18 2024 -0400 Removed /etc/modprobe.d/rtlsdr.conf commit a5b7821479bf74f9b7c0d0a67998424fde30e642 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 21:24:29 2024 -0400 Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. commit 3c50ae76316a823174ced50e0d68c1bbf2189949 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:17:12 2024 -0400 Added error handling and Improved text in echo for moving RN2 tree commit b375303f75d62f22d852cfd18162fc9bebe1fcdd Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 17:07:59 2024 -0400 Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name commit 5552f61a62d15f7f9413a6b8b1d99336a2a9c135 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 12:03:14 2024 -0400 Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail commit edd0f4ef45b20aceeccc708729023fb5d9afbc8e Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:36:23 2024 -0400 Corrected /srv restore/Unstage permissions commit 7d91bd16a8cb249e3519b474ea0561624f7d82b4 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 11:18:53 2024 -0400 Script was renamed to rn2_uninstall.sh and moved to .rn2_utils commit 8c0c56d2ba6ead61105450204862fa665116bf9b Merge: a007035 bb0d497 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:49:02 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit a00703542ffb999d18f5fe423971e96782408066 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:48:21 2024 -0400 Added tee -a for appending to log file commit bb0d497e96c28a9e260439e3bc46e11766a644d9 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:27:38 2024 -0400 Resolve merge conflict commit a83fda3a95650a5906deeb03b8e8a1851a257ce9 Merge: acb9fc5 3fd34b1 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:16:48 2024 -0400 Merge branch 'aarch64-support' of https://github.com/creas002/raspberry-noaa-v2 into aarch64-support commit acb9fc53b8462b90561532eed28bb110efe4a6f2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:14:45 2024 -0400 Script was rename to rn2_uninstall.sh and moved to .rm2_utils commit 3fd34b17f5d79f00e2ec9bb24ade1cc958bf3ee2 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 10:08:22 2024 -0400 Update README.md - In-Situ Upgrade commit 4f97fae0760b4fd1f0d02078bda68a8d495cc161 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:55:59 2024 -0400 Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool commit b252da5d5319a318af317b0eb5b124733f5da073 Author: Richard Creasey - AI4Y <[email protected]> Date: Mon Jul 29 09:10:58 2024 -0400 Fix - DB Backup directory not cleaned up #1021 commit ad5555d760191e5e4e37cf7508b5d6f57de5e2cb Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 11:43:43 2024 -0400 RTL-SDR changes since it is not a APT installed package commit d967486f8a9f5e1e98f7bacffdf995af52974121 Author: Richard Creasey - AI4Y <[email protected]> Date: Sun Jul 21 09:22:53 2024 -0400 Clean up the library cache so any dangling items are cleared * Introduction of RN2 In-Situ Upgrade (#1024) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log to support.sh (#1028) * Clean up the library cache so any dangling items are cleared * RTL-SDR changes since it is not a APT installed package * Fix - DB Backup directory not cleaned up #1021 * Introduction of In-situ RN2 upgrade # 1) Backup/Stage RN2 key directories # 2) Uninstall existing RN2 installation # 3) git clone new repository # 4) Restore/UnStage RN2 key directories # 5) install_and_upgrade # 6) verification tool * Update README.md - In-Situ Upgrade * Script was rename to rn2_uninstall.sh and moved to .rm2_utils * Resolve merge conflict * Added tee -a for appending to log file * Script was renamed to rn2_uninstall.sh and moved to .rn2_utils * Corrected /srv restore/Unstage permissions * Stop and RN2 AT processes that might be running during uninstall # kill any RN2 AT processes as part of clean up, otherwise danglers # may have the RTL-SDR open and verification dry run test for satdump will fail * Moved git clone command to start of script Moved git clone command to start of script before destructive tasks are performed in case user passed a bad URL or Branch name * Added error handling and Improved text in echo for moving RN2 tree * Updated to remove reboot dependency and execute Verification Tool Verification script had 1 failure after Fresh OS install and install_and_upgrade.sh executed. Reboot would resolve the USB udev permission issue, but reloading udev rules and trigger resolves it without a reboot. I left the code block to execute verification tool on fresh installs, so it only happens the first time. Users can call Verification Tool anytime the need to such as part of support.sh script. * Removed /etc/modprobe.d/rtlsdr.conf * Since verifcation tool is added to install script, conditionally execute from upgrade script * Corrected variable name * Added git config, verification tool and tee to log --------- Co-authored-by: Sasszem <[email protected]> Co-authored-by: Richard Creasey - AI4Y <[email protected]> Co-authored-by: Jérôme <[email protected]> * Rebooting the Pi automatically after the first install * Fixing filling issue for SatDump Meteor images * Fixing filling issue for Meteor when decoding with SatDump * Update README.md (#1037) * Update core.yml - Simply getting OS Release (#1038) Update core.yml - Simply getting OS Release Goal was to work on as many as Debian Distro's as possible even if they are using local repo's * Update README.md (#1043) * Update rn2_uninstall.sh (#1045) Commenting out systemctl disable service because disable causes it to remain disabled even after the service is removed and reinstalled by Ansible Commenting out the disable command has no impact since it will be removed when removing packages * Update verification.sh (#1046) Ooops... I had hard coded /home/richard , fixed with ${HOME} * Beta development - Setting SDR Device ID, Fixed Receive scripts to pass PPM Offset, Fixed dependancies to work on OS Lite versions (#1049) * Setting SDR Device ID * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md - fixed mispelling * Update setting_sdr_source_id.md - Fixed 2nd typo * Update setting_sdr_source_id.md - Fixed more typo's (SMH) * Update setting_sdr_source_id.md - Reformatting * Update setting_sdr_source_id.md * beta-development - Pass missing --ppm_correction parameter to satdump Tested PPM Offset was passed and processed by satdump correctly when receive scripts were called from AT jobs with settings.yml values of : noaa_15_freq_offset: -2 noaa_18_freq_offset: -1 noaa_19_freq_offset: 0 meteor_m2_3_freq_offset: 1 meteor_m2_4_freq_offset: 2 * beta-development - bug fix - OS Lite versions Bookworm 64 & Bullseye 32 OS Lite versions Bookworm 64 & Bullseye 32 fail on fresh OS install I have tested this fix on Bookworm 64-bit full & lite as well as Bullseye 32-bit Full/lite OS Lite versions do not have .config, but when its created as as part of the .config/meteordemod task below The .config ownership of top directory is root:root 755 when this happens and it needs to be target_user:target_user 700 * Clean up Bogus config/annotation directory created under $HOME RN2 installs have been placing a second config/annotation directory under ${HOME} which is not used. As part of this clean up the verification tool permissions list has this directory and is sub directory removed from being checked. * Removed unneeded task * Fix to be tested * Fix to be tested for RTL-SDR PPM correction (#1051) * Fixing filling issue for SatDump Meteor images * Fix to be tested * Beta development - modified receive scripts to pass PPM & Offset based on receiver type (#1052) * Setting SDR Device ID * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md - fixed mispelling * Update setting_sdr_source_id.md - Fixed 2nd typo * Update setting_sdr_source_id.md - Fixed more typo's (SMH) * Update setting_sdr_source_id.md - Reformatting * Update setting_sdr_source_id.md * beta-development - Pass missing --ppm_correction parameter to satdump Tested PPM Offset was passed and processed by satdump correctly when receive scripts were called from AT jobs with settings.yml values of : noaa_15_freq_offset: -2 noaa_18_freq_offset: -1 noaa_19_freq_offset: 0 meteor_m2_3_freq_offset: 1 meteor_m2_4_freq_offset: 2 * beta-development - bug fix - OS Lite versions Bookworm 64 & Bullseye 32 OS Lite versions Bookworm 64 & Bullseye 32 fail on fresh OS install I have tested this fix on Bookworm 64-bit full & lite as well as Bullseye 32-bit Full/lite OS Lite versions do not have .config, but when its created as as part of the .config/meteordemod task below The .config ownership of top directory is root:root 755 when this happens and it needs to be target_user:target_user 700 * Clean up Bogus config/annotation directory created under $HOME RN2 installs have been placing a second config/annotation directory under ${HOME} which is not used. As part of this clean up the verification tool permissions list has this directory and is sub directory removed from being checked. * Removed unneeded task * Reverting PPM changes to receive scripts ppm_correction should only be used for RTPSDR and RTL-TCP, there may be other receivers that can use it but unknown * Update noaa-v2.conf.j2 This was left out of ansible/roles/common/templates/noaa-v2.conf.j2 template file which caused an error for anyone enabling it. # Coronal mass ejection activity ENABLE_CORONAL={{ enable_coronal|lower }} * modified receive scripts to pass PPM & Offset based on receiver type Modified receivenoaa.sh & receive_meteor.sh scripts to pass PPM & Offset based on receiver type. Also added a log statement so everybody can see whats getting sent to satdump from output.log /home/richard/raspberry-noaa-v2/scripts/receive_noaa.sh "NOAA 18" NOAA-18-20240813-153343 /home/richard/raspberry-noaa-v2/tmp/orbit.tle 1723563223 3 32 Southbound E # I added setting FREQ_OFFSET="" when its not an rtlsdr receiver to prevent the Offset being passed to satdump if [[ "$receiver" == "rtlsdr" ]]; then gain_option="--gain" ppm_correction="--ppm_correction" else gain_option="--general_gain" FREQ_OFFSET="" fi I tested it for NOAA 18 and you can see PPM and Offset was passed to satdump as desired: richard@raspberrypi:~$ /home/richard/raspberry-noaa-v2/scripts/receive_noaa.sh "NOAA 18" NOAA-18-20240813-153343 /home/richard/raspberry-noaa-v2/tmp/orbit.tle 1723563223 3 32 Southbound E INFO : The system has enough space to store a NOAA pass on RAM INFO : Free : 7454 ; Required : 50 INFO : Direction Southbound INFO : Cropping SatDump NOAA images enabled INFO : Recording /home/richard/raspberry-noaa-v2 via rtlsdr at MHz via SatDump live pipeline INFO : /usr/bin/satdump live noaa_apt . --source rtlsdr --samplerate 1.024e6 --ppm_correction 0 --frequency 137.9125e6 --satellite_number 18 --sdrpp_noise_reduction --gain 49.6 --autocrop_wedges --start_timestamp 1723563313 --save_wav --timeout 3 INFO : Files recorded INFO : Resampling down audio INFO : Producing pristine image INFO : Bulding pass map Satdump log shows ppm was passed 14:08:43 - 13/08/2024] (D) Parameters : [14:08:43 - 13/08/2024] (D) - align_timestamps : true [14:08:43 - 13/08/2024] (D) - audio_samplerate : 50000.0 [14:08:43 - 13/08/2024] (D) - autocrop_wedges : true [14:08:43 - 13/08/2024] (D) - baseband_format : "cf32" [14:08:43 - 13/08/2024] (D) - buffer_size : 1000000 [14:08:43 - 13/08/2024] (D) - frequency : 137912500 [14:08:43 - 13/08/2024] (D) - gain : 49.6 [14:08:43 - 13/08/2024] (D) - max_crop_stddev : 3500 [14:08:43 - 13/08/2024] (D) - ppm_correction : 0 [14:08:43 - 13/08/2024] (D) - samplerate : 1024000 # Since I don't have another SDR receiver type, I flipped the logic to test that neither --ppm_correction or Offset values were passed to setdump using: if [[ "$receiver" == "rtlsdr" ]]; then gain_option="--general_gain" FREQ_OFFSET="" else gain_option="--gain" ppm_correction="--ppm_correction" fi richard@raspberrypi:~$ /home/richard/raspberry-noaa-v2/scripts/receive_noaa.sh "NOAA 18" NOAA-18-20240813-153343 /home/richard/raspberry-noaa-v2/tmp/orbit.tle 1723563223 3 32 Southbound E INFO : The system has enough space to store a NOAA pass on RAM INFO : Free : 7452 ; Required : 50 INFO : Direction Southbound INFO : Cropping SatDump NOAA images enabled INFO : Recording /home/richard/raspberry-noaa-v2 via rtlsdr at MHz via SatDump live pipeline INFO : /usr/bin/satdump live noaa_apt . --source rtlsdr --samplerate 1.024e6 --frequency 137.9125e6 --satellite_number 18 --sdrpp_noise_reduction --general_gain 49.6 --autocrop_wedges --start_timestamp 1723563313 --save_wav --timeout 3 ^CINFO : Files recorded INFO : Resampling down audio INFO : Producing pristine image INFO : Bulding pass map Satdump log shows ppm & offset was not passed [14:11:17 - 13/08/2024] (D) Parameters : [14:11:17 - 13/08/2024] (D) - align_timestamps : true [14:11:17 - 13/08/2024] (D) - audio_samplerate : 50000.0 [14:11:17 - 13/08/2024] (D) - autocrop_wedges : true [14:11:17 - 13/08/2024] (D) - baseband_format : "cf32" [14:11:17 - 13/08/2024] (D) - buffer_size : 1000000 [14:11:17 - 13/08/2024] (D) - frequency : 137912500 [14:11:17 - 13/08/2024] (D) - general_gain : 49.6 [14:11:17 - 13/08/2024] (D) - max_crop_stddev : 3500 [14:11:17 - 13/08/2024] (D) - samplerate : 1024000 I modified receive_metoer.sh and performed the same testing /home/richard/raspberry-noaa-v2/scripts/receive_meteor.sh "METEOR-M2 4" METEOR-M2-4-20240813-194754 /home/richard/raspberry-noaa-v2/tmp/orbit.tle 1723578474 3 83 Northbound W I tested it for M2-4 and you can see PPM and Offset was passed to satdump as desired: INFO : The system has enough space to store a Meteor pass on RAM INFO : Free : 7462 ; Required : 10 INFO : Direction Northbound INFO : I'll flip this image pass because FLIP_METEOR_IMG is set to true and PASS_DIRECTION is Northbound INFO : Recording /home/richard/raspberry-noaa-v2 via rtlsdr at 137.9000 MHz using SatDump record INFO : /usr/bin/satdump live meteor_m2-x_lrpt . --source rtlsdr --samplerate 1.024e6 --ppm_correction 0 --frequency 137.9000e6 --gain 49.6 --fill_missing --timeout 3 INFO : Removing old bmp, gcp, and dat files INFO : Running MeteorDemod to demodulate OQPSK file, rectify (spread) images, create heat map and composites and convert them to JPG INFO : Waiting for files to close Satdump log shows ppm was passed [14:32:22 - 13/08/2024] (D) Parameters : [14:32:22 - 13/08/2024] (D) - baseband_format : "cf32" [14:32:22 - 13/08/2024] (D) - buffer_size : 1000000 [14:32:22 - 13/08/2024] (D) - cadu_size : 8192 [14:32:22 - 13/08/2024] (D) - constellation : "oqpsk" [14:32:22 - 13/08/2024] (D) - derandomize : true [14:32:22 - 13/08/2024] (D) - fill_missing : true [14:32:22 - 13/08/2024] (D) - frequency : 137900000 [14:32:22 - 13/08/2024] (D) - gain : 49.6 [14:32:22 - 13/08/2024] (D) - nrzm : true [14:32:22 - 13/08/2024] (D) - ppm_correction : 0 [14:32:22 - 13/08/2024] (D) - rs_dualbasis : false [14:32:22 - 13/08/2024] (D) - rs_i : 4 [14:32:22 - 13/08/2024] (D) - rs_type : "rs223" [14:32:22 - 13/08/2024] (D) - rs_usecheck : true [14:32:22 - 13/08/2024] (D) - samplerate : 1024000 # Since I don't have another SDR receiver type, I flipped the logic to test that neither --ppm_correction or Offset values were passed to setdump using: NFO : The system has enough space to store a Meteor pass on RAM INFO : Free : 7463 ; Required : 10 INFO : Direction Northbound INFO : I'll flip this image pass because FLIP_METEOR_IMG is set to true and PASS_DIRECTION is Northbound INFO : Recording /home/richard/raspberry-noaa-v2 via rtlsdr at 137.9000 MHz using SatDump record INFO : /usr/bin/satdump live meteor_m2-x_lrpt . --source rtlsdr --samplerate 1.024e6 --frequency 137.9000e6 --general_gain 49.6 --fill_missing --timeout 3 INFO : Removing old bmp, gcp, and dat files INFO : Running MeteorDemod to demodulate OQPSK file, rectify (spread) images, create heat map and composites and convert them to JPG INFO : Waiting for files to close Satdump log shows ppm & offset was not passed [14:35:06 - 13/08/2024] (D) Parameters : [14:35:06 - 13/08/2024] (D) - baseband_format : "cf32" [14:35:06 - 13/08/2024] (D) - buffer_size : 1000000 [14:35:06 - 13/08/2024] (D) - cadu_size : 8192 [14:35:06 - 13/08/2024] (D) - constellation : "oqpsk" [14:35:06 - 13/08/2024] (D) - derandomize : true [14:35:06 - 13/08/2024] (D) - fill_missing : true [14:35:06 - 13/08/2024] (D) - frequency : 137900000 [14:35:06 - 13/08/2024] (D) - general_gain : 49.6 [14:35:06 - 13/08/2024] (D) - nrzm : true [14:35:06 - 13/08/2024] (D) - rs_dualbasis : false [14:35:06 - 13/08/2024] (D) - rs_i : 4 [14:35:06 - 13/08/2024] (D) - rs_type : "rs223" [14:35:06 - 13/08/2024] (D) - rs_usecheck : true [14:35:06 - 13/08/2024] (D) - samplerate : 1024000 * Ensure ownership/permissions are set correctly for key scripts * Ensure ownership/permissions are set correctly for key scripts --------- Co-authored-by: MihajloPi - YU4MPI <[email protected]> * Changing config directory ownership as root * Removing whitespaces * Ooops... * Allow odd timezones in sun.py (#1056) * fixes #1021 * fixes #1055 * Fix deprecation warning in heatmap.py (#1059) * fixes #1021 * fixes deprecation message for getsize and ANTIALIAS (will be removed in Pillow 10) * Beta development - Update dependencies/yml - added become: yes for .config ownership (#1057) * Setting SDR Device ID * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md * Update setting_sdr_source_id.md - fixed mispelling * Update setting_sdr_source_id.md - Fixed 2nd typo * Update setting_sdr_source_id.md - Fixed more typo's (SMH) * Update setting_sdr_source_id.md - Reformatting * Update setting_sdr_source_id.md * beta-development - Pass missing --ppm_correction parameter to satdump Tested PPM Offset was passed and processed by satdump correctly when receive scripts were called from AT jobs with settings.yml values of : noaa_15_freq_offset: -2 noaa_18_freq_offset: -1 noaa_19_freq_offset: 0 meteor_m2_3_freq_offset: 1 meteor_m2_4_freq_offset: 2 * beta-development - bug fix - OS Lite versions Bookworm 64 & Bullseye 32 OS Lite versions Bookworm 64 & Bullseye 32 fail on fresh OS install I have tested this fix on Bookworm 64-bit full & lite as well as Bullseye 32-bit Full/lite OS Lite versions do not have .config, but when its created as as part of the .config/meteordemod task below The .config ownership of top directory is root:root 755 when this happens and it needs to be target_user:target_user 700 * Clean up Bogus config/annotation directory created under $HOME RN2 installs have been placing a second config/annotation directory under ${HOME} which is not us…

creas002 added 10 commits July 20, 2024 08:45

Set 755 on verification.sh

4637797

Set 755 on verification.sh

Ensure meteordemond working directory exists

3f3f574

Set 755 on build_permissions_list.sh

c0b51ff

Update README.md

3b4aa4e

Introduction of new Verification Tool

Update README.md

09679d2

Reformatting Troubleshooting section from lastchange

Update README.md

850c8a7

Script to remove RN2 installation

b9b3e8e

Merge branch 'aarch64-support' of https://github.com/creas002/raspber…

fb87bd0

…ry-noaa-v2 into aarch64-support

updated to shutdown nginx before removal

1a0554c

creas002 changed the title ~~Introduction of Verification Tool~~ Introduction of Verification Tool and RN2 uninstall script Jul 20, 2024

creas002 added 7 commits July 20, 2024 15:25

stop php service

052f325

Corrected php service name to stop when removing RN2

10814d6

further cleanup of services

f274b88

Tweaked some of the logging messages

8ee10e0

updated to remove rtl-sdr package

210f52b

install script does not install RTL-SDR when it finds source in /tmp

95d4c0c

Update caution_uninstall_rn2.sh

167d794

MihajloPi approved these changes Jul 21, 2024

View reviewed changes

MihajloPi merged commit 05c3d3c into jekhokie:aarch64-support Jul 21, 2024

MihajloPi mentioned this pull request Aug 1, 2024

aarch64 support (#1031) #1032

Merged

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Introduction of Verification Tool and RN2 uninstall script #1019

Introduction of Verification Tool and RN2 uninstall script #1019

creas002 commented Jul 20, 2024 •

edited

Loading

Introduction of Verification Tool and RN2 uninstall script #1019

Introduction of Verification Tool and RN2 uninstall script #1019

Conversation

creas002 commented Jul 20, 2024 • edited Loading

creas002 commented Jul 20, 2024 •

edited

Loading